My New Porsche Cayenne : Ceramic Coating Application!

[@PanTheOrganizer]

🔥 For more quality detailing products visit: tinyurl.com/bdehsjys ⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️ 🇺🇸 For people in USA: C6 Hydro Lite ceramic coating: bit.ly/3AXI983 C6 Adhesion Promoter Polish (APP): bit.ly/3UU6OSm Foam coating applicator: bit.ly/3Ne3blC Foam coating applicator: bit.ly/3JSaLRj First coating leveling towel: bit.ly/3UNgtKx Second plush coating buffing towel: bit.ly/3UwAUdh DIY Detail Gold Standard Polish: bit.ly/3TMcPja DIY Detail Gold Standard Polish: bit.ly/3WwLbsy DIY Detail Gold Standard Waffle Pad: bit.ly/3ZKX2EX DIY Detail Gold Standard Waffle Pad: bit.ly/3wgWEC9 DIY Detail red jeweling pad: bit.ly/3TTWoBB DIY Detail red jeweling pad: bit.ly/3JQgln8 DIY Detail dual action random orbital polisher: bit.ly/4bpvqb8 DIY Detail rotary polisher: bit.ly/4b7se4p DIY Detail Rinseless Wash: bit.ly/3XPJc1s DIY Detail Rinseless Wash: bit.ly/3URj8TG Lake Country System 4000 pad washer: bit.ly/3ybFear Phendo polisher (for applying C6 APP): amzn.to/49FJXyf CarPro DarkSide tire dressing: bit.ly/4eO35Nv CarPro DarkSide tire dressing: bit.ly/3rF8xPM 🇨🇦 For people in Canada: C6 Hydro Lite ceramic coating: bit.ly/3QFKeKN C6 Adhesion Promoter Polish (APP): bit.ly/3JUDAfT DIY Detail Gold Standard Polish: bit.ly/3Y9AM4S DIY Detail Gold Standard Waffle Pad: bit.ly/3Ov5GBv DIY Detail red jeweling pad: bit.ly/3vWabP8 DIY Detail dual action random orbital polisher: bit.ly/49IppoX DIY Detail rotary polisher: bit.ly/49IZwVY DIY Detail Rinseless Wash: bit.ly/3XomKMu Lake Country System 4000 pad washer: bit.ly/3JpxzYm Phendo polisher (for applying C6 APP): amzn.to/44kxFdL CarPro DarkSide tire dressing: bit.ly/3V9DlSm 🇪🇺 For people in Europe: C6 Hydro Lite ceramic coating: bit.ly/3Wrtw5s C6 Adhesion Promoter Polish (APP): bit.ly/4aWAtQx DIY Detail products: rb.gy/6zv5te 🇬🇧 For people in the UK: C6 Hydro Lite ceramic coating: tinyurl.com/5n7rwwzy C6 Adhesion Promoter Polish (APP): tinyurl.com/mr3dx6va DIY Detail Gold Standard Polish: bit.ly/3xI50mz DIY Detail Gold waffle pad: bit.ly/3JlUYKv DIY Detail red jeweling pad: bit.ly/4dfGYjd DIY Detail Rinseless Wash: bit.ly/3KJYVcO Lake Country System 4000 pad washer: bit.ly/3xGXfNG Phendo polisher (for applying C6 APP): amzn.to/49FJXyf CarPro DarkSide tire dressing: bit.ly/3JkfcUS 🇦🇺 For people in Australia: C6 Hydro Lite ceramic coating: bit.ly/4bwwIBq C6 Adhesion Promoter Polish (APP): bit.ly/3wdiLcm DIY Detail Gold Standard Polish: bit.ly/3xEdj2P DIY Detail Gold waffle pad: bit.ly/3xKpFXe DIY Detail red jeweling pad: bit.ly/3Q77eSE DIY Detail Rinseless Wash: bit.ly/3UpTBRm

[@WowRixter]

Did you ceramic coat your Porsche Sport Exhaust? I'm getting the PSE on my new factory ordered Macan in the spring. It will have black exhaust tips and I'm wonder what you do for yours. If coated you must need a heat tolerant coating? Is there a concern that the coating could trap heat in the exhaust tips? Thanks Pan!

[@shojus]

I think Yvan is probably one of the few that would be allowed to touch Pans car! 😆

[@diydetailofficial]

Possibly.

[@shojus]

@@diydetailofficial You are definitely a legend when it comes to the detailing community and your hard works shows! Congrats on your companies success!

[@PanTheOrganizer]

You are 100% right

[@tommcleavey2661]

Don’t forget Sylvi !!!

[@shojus]

@@tommcleavey2661 Of course! Her and Yvan are definitely a great team!

[@C6ceramics]

Pan, Thank you. For having us, can’t wait for your first real wash on the Porsche.

[@PanTheOrganizer]

Always a pleasure to hang out with you! I'm loooooving this coating so far!! :)

[@Beyondspotlessauto]

I can understand why hydro and gloss is separated. Does both of these have other things like grime/tar resistant and bird droppings? Or can you apply one on top of the other?

[@P-47D_theJug]

DIY detail is my favorite brand then carpro. If anything Ivan is a very good salesman lol. You and Ivan are my two favorite people in this space. Ivan just has so much knowledge about this industry. Pan you have such a wonderful passion for this industry it’s a joy to follow along with you.

[@PanTheOrganizer]

Thanks!

[@danielc924]

Met Yvan while he was in Melbourne almost two weeks ago for a workshop tutorial in coating. Amazing teacher and such a great product!

[@diydetailofficial]

Thank you Mate!

[@PanTheOrganizer]

Very cool!

[@dannysandoval5195]

Great seeing Pan and Yvan together. Two legends of car detailing! 👍

[@PanTheOrganizer]

💪🏻👏🏻👍🏻

[@C6ceramics]

Thank you, but I’m sure Pan will agree, we are not legends, we are still very much students of the industry.

[@bobbarnes]

@diydetailofficial Yvan how often do you wash your pad throughout the polishing process? It also appears you did not wipe off the polish between the initial polish and the jewel pad with the rotary polisher is that accurate? Last question. If you do not own a rotary polisher can you still use the red jewel pad on a D-A polisher? Thanks in advance. 😁

[@diydetailofficial]

We wash the pad after every section. Yes we leave the polish residue on the surface between steps. Yes a DA is fine.

[@cgraham6]

Yvan! Always awesome to see you crop up on Pan's channel. How lucky that Pan gets a C6 coating, put down by the OG installer.

[@PanTheOrganizer]

It was done to perfection 👏🏻

[@Dontknowanything327]

Yvan is THE BEST!!!

[@PanTheOrganizer]

He’s a great guy and a great friend!

[@diydetailofficial]

Thank you.

[@Ecdetails]

Yvan and Sylvie power duo , Sylvie is one of the best detailers I have ever seen in real life haha love you Yvan but you know and I know she’s amazing - great video pan turned out amazing

[@diydetailofficial]

Agreed Eddie

[@PanTheOrganizer]

You know it! Thanks brother!

[@AdamosGarage]

Loved the whole video and Yvan sharing his expertise!! Wish Yvan could come coat my vehicle now!! Lol

[@PanTheOrganizer]

Thanks for watching!

[@diydetailofficial]

Depending on where you are, we might be able to make it happen

[@AdamosGarage]

@@diydetailofficial One can only dream! To be able to soak up that knowledge like a sponge would be an amazing! If you ever make it to YEG, my door is always open!!

[@nathanwalters2856]

Congratulations Pan for reaching a million subscribers 🎉

[@PanTheOrganizer]

Thank you so much 😀

[@Apexmissed]

Yvan is the greatest marketer i have seen. The guy and the brand are EVERYWHERE!

[@C6ceramics]

Thank you

[@soapa4279]

Love me some Yvan. One of the few genius minds in the automotive detailing community.

[@PanTheOrganizer]

He has over four decades in the industry and it shows. So much knowledge.

[@C6ceramics]

Thank you. Far from a genius, just a very observant student.

[@JeffreySmith-m3y]

I've had my DIY 5 year ceramic coating since November and i absolutely love it. These professional level products look awesome but i had never decontaminated, polished or coated a car in my life and the 5 year DIY coating went on like a dream. Couldnt be happier.

[@PanTheOrganizer]

Thanks for sharing your experience.

[@JeffreySmith-m3y]

​@@PanTheOrganizerThanks Pan. Those hydrophobics are ridiculous.

[@C6ceramics]

Your DIY Detail coating is a professional grade coating.

[@JeffreySmith-m3y]

@@C6ceramics good point! I just meant the type of coating you have to get certified to apply.

[@Jose.G.Y]

Holy cow, those hydrophobics are insane

[@PanTheOrganizer]

They absolutely are the best hydrophobics I have seen so far!

[@C6ceramics]

Thank you.

[@josephdefreitas56]

Wow. What an amazing collaboration. The two best detailers in North America

[@PanTheOrganizer]

Let’s go! Thanks Joseph!

[@C6ceramics]

Thank you.

[@rleger123]

Always awesome to have guests like Yvan! Keep it up and keep up updated

[@PanTheOrganizer]

More to come!

[@ericwalker6607]

Pan, I am meticulous about keeping my car clean. So what is your advice about maintaining the outside of the vehicle on a 3 week road trip with none of my home detailing equipment? What should I bring, suggestions as to how to wash, etc?? Thanks

[@rogermendez7266]

Get on the KZbin Detail University 😂

[@Bryan2606Rivera]

I might need to move to Canada. All of the pro detailers I follow on KZbin live in Canada 😭😂🙌🏽 great video!

[@diydetailofficial]

Thank you

[@vincentolo9271]

😂

[@PanTheOrganizer]

Thanks Bryan!

[@danielpilachowski2424]

Glad Pan did not have the dealership put ceramic on his Porsche .

[@PanTheOrganizer]

I always tell my viewers to say NO to any protection package offered by dealerships. They offer cheap crap at high profit margins, and won't see you again anyways, so they don't care.

[@kevh3239]

Hi Pan, sorry if I sounded ungrateful. I think you are definitely the most informative detailing channel with by far the largest content on KZbin. I know you must spend an immeasurable amount of time filming, editing and loading content . If you are doing all this alone it is really commendable. Your efforts are appreciated so thank you.

[@PanTheOrganizer]

Thanks Kev. I appreciate it. Yes I do everything solo. No team, just me. I appreciate the feedback. 😁👍🏻

[@TopShottaFYC]

I should’ve saw this coming! Fantastic video and thank you so much to Yvan and Sylvie for coming out to Pans and making a banger video. Congrats on C6!!

[@PanTheOrganizer]

Glad you enjoyed it!

[@C6ceramics]

Thank you.

[@smoothe4216]

I see Yvan and his wife automatically thumbs up

[@PanTheOrganizer]

They are great people!

[@diydetailofficial]

Thank you.

[@Lemmy117]

These videos are always giving out good information on detailing.

[@PanTheOrganizer]

Glad you like them!

[@excaliburdg1762]

Love your “use it” attitude, Pan. That is an amazing vehicle that now looks better than it ever could have coming out of the factory. Enjoy every moment with it!

[@PanTheOrganizer]

Thanks!

[@philipjohnson8064]

From what I see Yvan is using the Gold Standard Polish with the yellow pad then when he switches to the Red pad is he just going over the polish left from the yellow pad or do he put more gold standard on the red pad to get the extra shine?

[@PanTheOrganizer]

Every time he cleans the pads, he adds one spray if the polish.

[@xXYoguiPRXx]

The dream team

[@diydetailofficial]

Thank you

[@PanTheOrganizer]

💪🏻👍🏻

[@jeffsmith6837]

Pan, Your face when opening the Hydro box is priceless.! Your like a little kid in a toy store. So much anticipation. Congratulations.

[@PanTheOrganizer]

Hehe thanks for watching!

[@jeffsmith6837]

​@@PanTheOrganizer I would love to do this ceramic process. I just bought a new Ford F250 Platinum. I have no shade to detail with 113 heat index and 90 percent humidity here in Texas. It just don't seem possible right now.

[@basilnexus5076]

As a scientist, I can assure you that half of what is said in this video does not align with the scientific knowledge of surface coatings or modifications. The claims contradict themselves. For instance, polishing and applying an adhesion promoter without cleaning the surface is absurd. Furthermore, stating that an adhesion promoter contains a little polishing compound and then applying a ceramic coating right after contradicts the requirement that a ceramic coating must be applied to a clean, clear coat surface. This presentation uses a lot of scientific terminology that may impress the average person but does not hold up to critical thinking and scientific scrutiny. I hope this clarifies my points.

[@C6ceramics]

The C6 Ceramics APP isn’t a compound, it deep cleans the surface in a cream form instead of a liquid. The beautiful thing about science and technology is it’s not limited.

[@basilnexus5076]

@@C6ceramics there are cutting compounds and polishes. The difference is in aggressiveness. Polisher is much milder, bedides oils that saturate clear coat it still contains polishing compounds. In the above video they refer to it containing small amount of polishing compounds. Guess what, after using it oils waxes, polishing compounds and everything else that was there remains on the top of clear coat. After you apply ceramic coating, guess to what it will bind beside clear coat, right - to everything else that is on the surface. I see videos with claims only, did you ever did simple comparative test between different brands that measure contact angle of water on newly coated surface and the one that was subjected to accelerated aging ( temperature, UV, dirt and controlled cleaning with ddurfactants)? Was contact angle ever measured, or "good beading" is good enough for product promotion? Science and technology is based on the facts. With any coating product are there any scientific evidences on what is the surface composition before coating and after coating (FTIR analysis), surface roughness ( nano profilometer, AFM)?

[@rlinkandroidauto-xe9sg]

I don't think it's that deep...But after watching some of these detailing videos, especially on channels that not just detail, but also try to "educate", I tend to agree that they like to throw in statements as if they're scientifically factually correct, while it's pretty clear that car detailing in general is pretty subjective, since we don't know what exactly are in all these products and how they interact with the paint coating (in the tons of different conditions). Probably to try and sell products/services by appearing to be "smart". At the end of the day, with car detailing it mostly comes down to look, feel and some basic facts as to ie. how long the hydrophobic effects of certain products are (even though these could also vastly vary depending on application condition, environment, usage of the car etc.). I have come to appreciate these videos more by simply looking at the (satisfying) process and the (satisfying) results and somewhat ignoring all the "in-depth" talk.

[@becomingunhuman2106]

“Science” as you are describing is meaningless when it comes to real world results. Buy the coating and apply it using their methods, buy another coating and use it using their methods, compare results. They are speaking for the layman, this video isn’t the breakdown, wait for the next one and then let’s hear your critiques.

[@minicoop78]

As a scientist you have very poor grammar and spelling.

[@Apac1226]

Okay I need your help. After watching you and Yvan for some time now, I have purchased a two-year ceramic coat, turtle Wax flex wax, bead maker, and dream Maker. Are some of these products redundant or do I use them all and if so in what order? (DIY rinseless wash also for what it's worth which I use as a drying aid.)

[@PanTheOrganizer]

You clearly have way too many paint protections, and you would not use them all on the same vehicle. If you bought a 2-year coating, that would be the most durable product from your list, so that should be your main paint protection. Flex Wax is the second most durable, typically lasting 6-12 months, so if you feel more comfortable using a spray product, use that instead of the 2-year coating, as I'm assuming that coating is in a glass bottle. For maintenance, after each wash or once a month, you can use Bead Maker. That will boost gloss and slickness. You can either use it as a drying aid on wet paint, or as a quick detailer on dry paint. You can also mix Bead Maker and Dream Maker together, to get even more gloss and also get anti-static properties. 1:10 mix as shown in my video here: kzbin.info/www/bejne/qqjYhZdoi7Ofrtksi=k5EM0e6_d00LGFcP

[@Apac1226]

@@PanTheOrganizer yea I sort of figured that I had some redundancies which is why I wanted to ask you. But I have all of them because I never know which customer would prefer and just wanted to make sure I used them correctly, so ty for getting back to me so quickly and thoroughly

[@barryyoung8617]

Do you need to apply the ceramic by hand or can you use a spray application.

[@PanTheOrganizer]

By hand.

[@diydetailofficial]

Hand application does a better job, and is much safer.

[@erik9108]

The look Yvan gave Pan after he touched the car without protection was classic!! Great looking coating offerings and the APP looks like a next-level product. It's an exciting time to be a detailing enthusiast!

[@PanTheOrganizer]

Glad you liked it!

[@diydetailofficial]

If he were an employee he may have been fired

[@mauricetremblay1324]

Almost every time I watch one of your videos I go and wash my car. Yvan is such a master and a gentleman. Beautiful car, beautiful results. As always.

[@PanTheOrganizer]

Glad to serve as an inspiration Maurice! :) I hope you are having a great weekend.

[@diydetailofficial]

Thanks, but I’m definitely not a master, just a student.

[@acefire07]

If you needed to remove some deeper scratches, would you use the DIY Detail wool pad prior to the waffle and jeweling pad?

[@PanTheOrganizer]

Yes of course. That would be a multi-step paint correction.

[@diydetailofficial]

Yes

[@hydraboat]

Hi, My wife got the same Porsche cayenne same color, and I did 8 year and 3 year DIY ceramic coating to it and looks great, What can I use to Remove a 4 year old ceramic on my Ram 2020 1500 and add G6 or 8 year DIY ceramic. Thank you so much,

[@PanTheOrganizer]

The only way to ensure 100% removal of an existing coating is by machine polishing. Then you use a paint prep spray to remove polishing oils. And then use the APP and then you apply C6.

[@neovisual633]

I do have a couple of questions: 1. Is is necessary to use a different polisher for the APP? 2. For the rinseless dampening towel, is there a mixture or dilution ratio you recommand? 3. Is the coating safe on chrome trim as well? Thanks for your help and videos, you always been a great help on my detailing journey!

[@PanTheOrganizer]

1. For the APP, you need a short stroke polisher 3-9 mm max (hence why we used an orbital sander to apply APP, it has a 5mm orbit). 2. You use the standard 1:256 dilution (0.5 oz per gallon of water) 3. You can apply it on paint, glass, wheels, lights, plastic trim. We covered my entire Porsche.

[@alanhefter4659]

Great video. Yvan and DIY have some great products and produce great videos. I want to thank Yvan for breaking the myth in a previous video that coatings have to be applied in a cross hatch pattern and can indeed be applied in a circular motion like he did here. That has saved me a lot of time. Thank you Yvan.

[@PanTheOrganizer]

Thanks for watching Alan!

[@C6ceramics]

Thank you Alan.

[@chrisdenman1985]

Love seeing Pan and Yvan together! This C6 coating went on just as easily as the DIY line. The only difference was using the APP step. How great is that! The gloss! The hydrophobics! The water just flys off! Pan the Cayenne looks incredible. Enjoy!

[@PanTheOrganizer]

Thanks Chris!

[@C6ceramics]

Thank you

[@neovisual633]

I see the coating is applied on the wheel, does it need to use APP before hand?

[@PanTheOrganizer]

Ideally yes. But we weren’t doing a wheels off detail here. So paint prep was used instead.

[@Spirited282]

All 3 Legends in one video, rather fantastic. Your Cayenne looks terrific Pan

[@PanTheOrganizer]

Glad you enjoyed it!

[@C6ceramics]

Thank you.

[@mikemaners4411]

Who can do this type of job in the Montreal erea? I would like to do the C6 Hydro ceramic job on my new car. Thank you

[@neilwalker5041]

Pan congratulations on the beautiful Porsche and as your learning the self cleaning may be the superstar of C6 Hydro. It is really cool watching those high contact angle water beads slide off your hood while driving in the rain. Hopefully you guys are enjoying the spring weather while us southerners having been looking in awe at the northern lights through our phones. Thank you for a fun video!

[@diydetailofficial]

Thank you.

[@PanTheOrganizer]

Thanks Neil!

[@TGR972]

Hi Pan, I just take reception of my new car. I see no defects on it, can I just wash it and do a decontamination for the ceramic coating?

[@PanTheOrganizer]

You might think it has no defects, but that’s almost impossible. Take an inspection light to it and you’ll see tons of flaws. 99% of new cars aren’t new. A new car is never new until it's properly detailed. - at the factory, the paint defects are often corrected quickly by rotary polishing which can leave marks and holograms, so polishing corrects those, before you lock that in long term with a ceramic coating for example. - vehicles are then transported by truck, train and boat so they are exposed to the elements, industrial fallout, brake dust, rail dust, etc - vehicles are often left at boat docks (when transported by boat) or in exterior parking lots for weeks or months, again being exposed to the elements - at the dealership, the vehicles are almost always poorly prepped using the same dirty water that was used for all the cars on a given day, and poor washing and drying methods leading to swirls and scratches - at the dealership, a layer of cheap wax or paint sealant is usually applied to attempt to make the paint glossy prior to delivery. It's crucial to remove any previous protection before you apply a ceramic coating, as coatings need to bond directly to a virgin clear coat. If you only plan on applying a regular carnauba wax or paint sealant though, you could decide to skip machine polishing, as those protectants can be applied over existing protection and it's not as crucial to prep the paint as well. I explain all of this in this popular video: kzbin.info/www/bejne/h5jSqqV5Ypp2g8U So you can better visualize the new car prep process, here are the steps I perform on a brand new car for my customers: RS6 Avant Performance: kzbin.info/www/bejne/gma2gmOQfq92oJIsi=mcQiMs9HBLlaqjGK Mercedes S 580: kzbin.info/www/bejne/jKLCpZmZrNesjKssi=whord2_UEFSg28UW Aston Martin Vantage: kzbin.info/www/bejne/hXzKkmavj7uHp9E Volvo XC60: kzbin.info/www/bejne/qqenc3Wbo82MfKM Tesla Model Y: kzbin.info/www/bejne/naDLnKZurbVohLs Porsche 911 Carrera: kzbin.info/www/bejne/aJTOmpysl6ukqZY Audi Q7: kzbin.info/www/bejne/qmirdHWJi9OcsK8

[@TGR972]

Thanks Pan for the advice. I'll watch all the videos.

[@jimprovax6846]

Wow Pan. Yvan and his wife knocked it out of the park. True dream team. Your new ride is smokin slick. Thanks for all you guys bring to this crazy car enthusiast world. Cheers and enjoy your weekend.

[@PanTheOrganizer]

Thanks for watching!

[@C6ceramics]

Thank you.

[@neovisual633]

Is it safe to use drying aid on this coating?

[@PanTheOrganizer]

Yes. If you are using a microfiber drying towel, always use a drying aid to act as a lubricant between the towel and paint, reducing chances of marring. C6 Ceramics will soon be releasing their own drying lubricant.

[@diydetailofficial]

Yes

[@chelsabailey1018]

Fabulous! Great to see you take such joy in caring for your new car!! Thanks for demoing the C6 Hydro Coating, too! Awesome!!

[@diydetailofficial]

Thank you

[@PanTheOrganizer]

You bet!

[@neovisual633]

Do I need to wash or clean the Clay Towel inbetween panels or every now and then during the decon process? Or I can just use it till the entire job is done, then clean / wash it?

[@PanTheOrganizer]

It depends how bad the contamination is. But most of the time, no need to clean the towel until the very end.

[@Mario-si5fi]

Wow ! Guys Pan's new Porsche ceramic coating done by Yvan this car just whent up in value... 2 of the best in the industry the car looks amazing guys congratulations Pan for choosing Yvan and diy products . Bravo les gars !👍

[@diydetailofficial]

Merci Mario

[@PanTheOrganizer]

Thanks for the kind words Mario!

[@fasha]

can a DIY rotary polisher be used to apply the APP instead of a sander?

[@PanTheOrganizer]

No as you'd be overworking the product. Use a low orbit (3mm to 9mm MAX) dual action machine.

[@stevenjordan6188]

Congratulations on one million subscribers. You deserve it, hard work pays off. You and the quality of your videos are fantastic. You have made me buy too much stuff though.

[@PanTheOrganizer]

Thank you so much 😀

[@omarpimentel1047]

Is that one of the best coatings you can get right now?

[@diydetailofficial]

Yes

[@billnipp2309]

Have you ever considered wet sanding paintwork, on any vehicle, to remove orange peeling? ty

[@PanTheOrganizer]

No as I detail daily drivers and orange peel is actually something you want to some extent as it masks a few imperfections with time. Wet sanding for a perfectly flat surface is mostly meant for garage queens, cars in museums or high valued collections that appear in shows like Pebble Beach or the Quail.

[@jonathanrobertson1350]

How does tbis interact with PPF? Also if i correct paint again, will it look differently than the area PPF?

[@PanTheOrganizer]

You can apply this on PPF as well.

[@williamhansen5498]

Best Coating video on the Net.

[@PanTheOrganizer]

Glad you think so! 💪🏻

[@C6ceramics]

Thank you.

[@eamonkelly2792]

Hi Pan and Yvan, that was a great job on the Porsche, all the best to Yvan with his new venture

[@diydetailofficial]

Thank you.

[@PanTheOrganizer]

👍🏻

[@bigrustybucket]

No checking your work as you go when polishing? No detail lights/torches?

[@diydetailofficial]

We did the test spot on the worst area.

[@leveluptricking4410]

This is the glossiest ceramic coating I have ever seen!!! The beading are the tightest I’ve ever seen. This product looks to be the best coating made so far. (I’m not a professional detailer so I could be wrong)

[@diydetailofficial]

Thank you.

[@PanTheOrganizer]

It certainly is top tier and if it does well over time, I could see this ranking in my yearly awards. Best hydrophobics I have ever seen from a coating.

[@larryblanchard2290]

So I just to confirm..in order to follow the exact first 2 steps In need both the Max Gloss rotary and the Correction Pro Da?

[@diydetailofficial]

Not those in particular, you can use the long stroke DA and Rotary of your choice. Of course we would be honoured if you used the DIY Detail polishers.

[@larryblanchard2290]

@diydetailofficial Yes just bought your Gloss machine, yellow pads and spray. Next will be your ceramic and prep polish for my new CX-70 when it arrives in July...until then, I will practice on my CX-9 and give it the high gloss treatment.....thanks

[@brandondarnes3699]

That water behavior and gloss is wild. I like Yvan.. he knows his stuff and is passionate. (not that you aren't Pan, haha) but taking about someone marketing a coating. Sweet stuff, and congrats on the Cayenne!

[@PanTheOrganizer]

Thanks Brandon! And yes Yvan is a master at marketing. He could sell ice to an eskimo! 😂

[@diydetailofficial]

Thank you

[@kmarty009]

Where do i find that roller seat Yvan used doing the wheel?? I need it!

[@PanTheOrganizer]

It was custom built by him.

[@waynebauerjr7426]

Totally guessed this one from when you picked it up lol. Keep this tradition going! Hope to see the other coating in a future video. The new ride looks fantastic! 🏎

[@PanTheOrganizer]

Hehe thanks!

[@diydetailofficial]

Thank you.

[@simonedesantis6508]

Hi pan, I'm your Italian fan. Can you tell me the model of blower you use to dry your car? or even more than one if there are others of good quality. Thank you

[@PanTheOrganizer]

This is my blower: bit.ly/3lCr8sc

[@simonedesantis6508]

@@PanTheOrganizer Tnx pan

[@dlj1285]

Isn’t a respirator advisable generally speaking when applying ceramic coatings?

[@PanTheOrganizer]

With these, a respirator isn't mandatory, but gloves are. Always wear gloves when applying coatings as you don't want the liquid to come in contact with your skin. Yvan talks about the health aspect of these coatings in a recent podcast on this channel: kzbin.info2tG1fYuveJU?si=WC3WwhRjeZDoCSfs

[@itachi1540]

I would stand out in the rain just to watch those hydrophobics. what a coating! One layer!

[@diydetailofficial]

That’s quite fun

[@PanTheOrganizer]

It’s insane!

[@tomchinigo5014]

WOW !!!! The results came out AMAZING, great job Ivan & Sylvie !!! The coating is superior for a superior vehicle. Great video Pan !!

[@PanTheOrganizer]

Thanks 👍

[@Agregoire61]

Qu'est ce que tu as mit sur les pneus. What have you put on your tires?

[@PanTheOrganizer]

This tire dressing: bit.ly/3rF8xPM

[@GoTMLGo1967]

So if I use a different brand polish, and then the APP, there is no need to use panel prep?

[@PanTheOrganizer]

If you polish using a different brand’s polish, yes use a paint prep spray to remove polishing oils. Then you use the APP and once you wipe off APP, do not use a panel prep, go straight to applying the coating.

[@GoTMLGo1967]

@@PanTheOrganizer thank you for clearing things up!

[@PanTheOrganizer]

No worries. Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 1 million subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@rayvalero8580]

Was really looking forward to this video. Glad the tradition stays with Yvan and Sylvie coating your newest vehicles! And now looking forward for the deep dive video on C6/DIY products!

[@PanTheOrganizer]

It’s a great tradition indeed!

[@C6ceramics]

Thank you. Can’t wait to do this again in 3 years

[@PanTheOrganizer]

Oh yeah!! That's the spirit. And who knows where the technology will bring us in three years. Three years ago, we would have never thought to see all this tech put into one coating! :)

[@SlowGTS]

Congrats on the new car! For coating maintenance, are you still planning to use ADS Amplify with your regular washes? Curious how it will affect C6 performance characteristics.

[@PanTheOrganizer]

I won't be using toppers that often with this coating, to preserve its awesome hydrophobics, as they are truly unmatched from any coating I have ever tested. Plus I use a blower to dry the car after washing, so I don't really need a drying aid. But once in a while, if I need I want a boost of gloss and slickness, perhaps I will use Amplify or any other quick detailer I like.

[@SlowGTS]

@@PanTheOrganizer Happy to hear it’s working out so well. Hope you get a chance to really enjoy the new car!

[@amill1563]

How are the Budweiser speakers?

[@PanTheOrganizer]

😂😂 The Burmester sound system is a treat for audiophiles like myself.

[@vicelnueve09]

Hey Pan, I recently bought my dream car. Sorry about I’m excited about it haha it is used. And I want to do a detail on it myself. I enjoy washing it but I want to restore it. Wouk it be ok if I do the wash with car pros reset, then use the iron-x then use tar-x and then clay it? I don’t have a polisher yet so I plan on applying a wax after the clay stage. So I just want to make sure those steps are ok. Please let me now if you suggest any other steps or anything in general. Thanks man

[@PanTheOrganizer]

Yes those steps are good. 👍🏻 Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 1 million subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@vicelnueve09]

@@PanTheOrganizer thanks man! Love your channel I’m definitely a diy-er so hopefully I can get a polisher soon. Also how often should I do this process?

[@PanTheOrganizer]

You only do it once. Once the coating is applied, if you use proper washing and drying methods, you shouldn’t have to polish the paint for many years. And you don’t polish a coating anyways as you would strip it by doing so. All that will be needed with C6 coatings is regular washes with a pH neutral soap and you can use a ceramic spray topper once in a while (not mandatory) if you feel you want to boost gloss and slickness. See my ceramic coating maintenance tutorial: kzbin.info/www/bejne/f6KsiGpue9KFj7csi=TzmhZnjOIbmXHHEN

[@RafaelKoike]

The gloss is spectacular. Congrats Pan.

[@PanTheOrganizer]

It really is! Thanks Rafael!

[@williamcarter1381]

Beautiful vehicle Pan, congratulations. It’s great to have the master detailer apply your coating too.

[@PanTheOrganizer]

Thanks 👍

[@diydetailofficial]

Thanks but I’m a student, not a master

[@peteraskerow]

We learned so much. A great video from some people who are so passionate about what they do.Thank you.

[@C6ceramics]

Thanks

[@PanTheOrganizer]

Glad you enjoyed it!

[@twistedbarbell3950]

Great video and product and I can't wait to apply mine shortly. One question though...I'm planning on having my front end PPF'd and will apply C6 coating on entire vehicle when returned; since PPF is not technically a paint like the clear coat, should the APP be used on the PPF anyway or avoided? I understood the process of swelling the paint, but don't know what to expect with PPF. Any clarification or insight to this would be greatly appreciated!

[@diydetailofficial]

Yes, both PPF and clearcoat are plastic.

[@twistedbarbell3950]

@@diydetailofficial Thank you! Another question as I prep to get this process going; Are you using Lake Country's cleaning solution in the bucket of their pad washer or is it just water to lube the pad? I love the system and know we can eject the moisture from the pad, but I'm a bit worried how any remnants of the cleaning solution might react with the spray polish.

[@79blustone]

Briefly Yvan, were did C6 the name come from? Also, how did it start? I'm new to this one 👍

[@PanTheOrganizer]

kzbin.info/www/bejne/Y521eX6ff552eNksi=fqg0NcLkW707VSGP

[@diydetailofficial]

The table of elements, C6 is carbon, the only ingredient in a diamond.

[@79blustone]

@diydetailofficial Of course, I completely forgot about the periodic table. Good shout 👍

[@79blustone]

@@PanTheOrganizer Thanks Pan, must have missed that somehow. Now informed 👌

[@PanTheOrganizer]

No worries mate!

[@yvesst-jacques3989]

Just pre-order C6 Hydro lite last Friday, can't wait to try it 😊 applied the stack 5 + 3 last weekend on 2 Mustang and the result was more than astonishing... DIY Detail are now the only products I use for detailing and it never put me down, awesome products, big big thanks to Yvan, Nick, Sylvie and you Pan to get me back into detailing again 😊

[@diydetailofficial]

Merci Yves

[@gerryconstantatos1092]

Is this ceramic available in the UK?

[@PanTheOrganizer]

Soon

[@freddrune8315]

Beautiful work and very interesting products.

[@diydetailofficial]

Thank you.

[@freddrune8315]

@@diydetailofficial you're welcome.

[@PanTheOrganizer]

Thanks Fred!

[@JR-ho5qm]

Fantastic! Ivan is the best!

[@C6ceramics]

Thank you

[@PanTheOrganizer]

Thanks for watching!

[@Samsin361]

When applying APP to the red Jewler pad, is the Red Pad damp or dry for the APP chemicals?

[@PanTheOrganizer]

Dry.

[@johnfontaine1257]

Congratulations Pan. It looks great. C6 is a great coating, I installed diamond gloss on my vintage Corvette and am blown away. Enjoy your new Porsche.

[@diydetailofficial]

Thank you.

[@PanTheOrganizer]

Thanks John!

[@varun4534]

any suggested products for shampoo and drying lubricant?

[@PanTheOrganizer]

As Yvan said, you can use the DIY Detail line of products for maintenance. DIY Detail Incredible Suds (shampoo): bit.ly/4b8FnKq DIY Detail Rinseless Wash: bit.ly/3URj8TG DIY Detail Ceramic Gloss (as a drying aid): bit.ly/3JTloU3

[@varun4534]

@@PanTheOrganizer i thought yvan was saying something on the lines of new c6 products, which will be launched at a later time. he talks about a drying lubricant with no built in protection which is different from diy interior gloss i believe. maybe i misunderstood 😅✌️

[@PanTheOrganizer]

There will be a few C6 products, like a drying lubricant, but that's still months down the line. He said all DIY Detail products can be used for maintenance of C6 Ceramics.

[@sergerobitaille6065]

Salut pan veut savoir si graphène peut appliqués par dessus céramique merci

[@PanTheOrganizer]

Si tu parles d'un spray graphène oui. Si c'est une protection graphène en fiole non, car une telle protection doit adhérer directement à un vernis vierge, sans protection préalable. Donc si tu as une protection graphène sur ta carrosserie, tu peux utiliser un spray céramique par dessus. Si tu as une protection céramique sur ta carrosserie, tu peux utiliser un spray graphène dessus. Les deux technologies sont interchangeables.

[@sawyersmallwood1286]

Pan, I currently have TRC Minx Royale 400gsm that I thought would be good for my quick detailers due to its plushness. However, it doesn’t glide very well with moisture. What other towel would you recommend for applying product onto dry surfaces? Thanks

[@PanTheOrganizer]

Perhaps see my video on towels I recommend for different uses here: kzbin.info/www/bejne/jICmqmWibceXo5Ysi=kuq1FYxRm0AIFgvc

[@KiranPatel-fk1pg]

Plush, long pile towels don't ever glide well when wet. You want a twist loop pile towel.

[@billbuss7542]

Pan, have you tested the new Cerakote ceramic coating yet?

[@PanTheOrganizer]

I received the new version at the end of April and have been testing since. Video to come soon.

[@nathankarns9067]

I have a 2016 GMC Terrain. Yes I have used Turtle Wax Ceramic Spray and Paste Wax as a base... what I have found works beautifully is to each panel apply Turtle Wax Pure Shine, Meguiars Gold Class, and Meguiars Ultimate Quik Detailer at the same time... try it out!

[@reggie2334able]

Will the DIY products have hydrophobic and UV protection

[@PanTheOrganizer]

Yes

[@jamalsadeddin1033]

What if my car is brand new? Do I need to do the polishing step?

[@PanTheOrganizer]

This car is brand spanking new. I literally took delivery and we did all the detailing work. 99% of new cars aren’t new until they are properly detailed, for the following reasons: - at the factory, the paint defects are often corrected quickly by rotary polishing which can leave marks and holograms, so polishing corrects those, before you lock that in long term with a ceramic coating for example. - vehicles are then transported by truck, train and boat so they are exposed to the elements, industrial fallout, brake dust, rail dust, etc - vehicles are often left at boat docks (when transported by boat) or in exterior parking lots for weeks or months, again being exposed to the elements - at the dealership, the vehicles are almost always poorly prepped using the same dirty water that was used for all the cars on a given day, and poor washing and drying methods leading to swirls and scratches - at the dealership, a layer of cheap wax or paint sealant is usually applied to attempt to make the paint glossy prior to delivery. It's crucial to remove any previous protection before you apply a ceramic coating, as coatings need to bond directly to a virgin clear coat. If you only plan on applying a regular carnauba wax or paint sealant though, you could decide to skip machine polishing, as those protectants can be applied over existing protection and it's not as crucial to prep the paint as well. I explain all of this in this popular video: kzbin.info/www/bejne/h5jSqqV5Ypp2g8U So you can better visualize the new car prep process, here are the steps I perform on a brand new car for my customers: RS6 Avant Performance: kzbin.info/www/bejne/gma2gmOQfq92oJIsi=mcQiMs9HBLlaqjGK Mercedes S 580: kzbin.info/www/bejne/jKLCpZmZrNesjKssi=whord2_UEFSg28UW Aston Martin Vantage: kzbin.info/www/bejne/hXzKkmavj7uHp9E Volvo XC60: kzbin.info/www/bejne/qqenc3Wbo82MfKM Tesla Model Y: kzbin.info/www/bejne/naDLnKZurbVohLs Porsche 911 Carrera: kzbin.info/www/bejne/aJTOmpysl6ukqZY Audi Q7: kzbin.info/www/bejne/qmirdHWJi9OcsK8

[@ATRUESERB]

Hi Pan. It would be nice if you could eventually make a video on How to build a home garage for detailing, including the materials used for the walls, floors, etc to ensuere that everything is safe and doesnt cause any damage to the house

[@loic4691]

Oh yes, so nice to see Yvan, love to see both of you in a vidéo ❤

[@1stfrompuertorico568]

Most definitely!!!!

[@loic4691]

Et on oublie pas Sylvie, j'espère que tous mes amis québécois dans cette vidéo vont bien 👋🇲🇶

[@diydetailofficial]

@@loic4691très bien Loïc, merci.

[@PanTheOrganizer]

More to come!

[@V1enthusiast]

Brilliant work! The results are stunning.

[@PanTheOrganizer]

Thank you! Cheers!

[@hippopotimusstew]

Very nice! Can’t wait for the drying lubricant to be available

[@PanTheOrganizer]

Me too!

[@C6ceramics]

In about 6 weeks

[@MrKennyanders]

The diamond bottle said color D, is this just branding are are there different for lighter and darker colors

[@diydetailofficial]

When shopping for diamonds, clarity of FL and Colour of D indicates the highest quality of Diamonds.

[@theogoyvaerts590]

Hi Pan, your new car looks great with this new C6 hydro coating. I've been searching this kind of coating in Belgium but I couldn't find it in a minute. I have a car detailer company living close to me but they work with Williams coating. After looking for vids on KZbin about Williams the only thing I could find are old vids (8 years ago). Do you or do you know somebody who has experience with Williams coating? I'm thinking of having my new car coated but I would like to have it done with a good product. So what do you think about Williams coating? Looking forward to a reply from you. Greetings from Belgium 🇧🇪🇧🇪🇧🇪

[@PanTheOrganizer]

I never heard of that coating.

[@diydetailofficial]

C6 Ceramics Hydro Lite is available in Europe, Pan has links in the description.

[@theogoyvaerts590]

@@diydetailofficial I found the company that sells the C6 Hydro Lite, but I could not find a detailer who works with C6. Like I said, I'm thinking of having my car ceramic coated at a detailer not to far away of where I'm living. So it seems that narrows it down to the brand they're using and not to what I have in mind that I would like to have as a coating. I think I have to make a choice anyway, so I'l see what a detailer can offer me. You can't have the best of both worlds it seems.

[@georgeplaras3854]

Hey! I love love love this content! Would the same process and products apply to satin/matt wheels or will it make them glossier?

[@diydetailofficial]

The same coating, but no polishing.

[@Andy-z6f]

Awesome video and detail guys.its really nice to see Ivan’s wife on the tools.😊

[@diydetailofficial]

Thanks

[@PanTheOrganizer]

Thanks!

[@b6343]

What tire shine did you use for this vehicle?

[@PanTheOrganizer]

I had placed a link in the video description. This tire sealant: bit.ly/3rF8xPM

[@rickyrice7376]

Looks absolutely amazing Pan! I was/am very impressed with Yvan's product line. How would you compare it to ROAR? Which was on your other Porsche. I want to use exactly what he used on your car. Is a bundle to get?

[@PanTheOrganizer]

Time will tell for durability, but so far, for gloss, slickness, and especially those hydrophobic properties, this is the best pro coating I have ever seen. You can't get the Hydro pro version that's on my car, as that's only available to certified C6 Ceramic installers, but you can get the Hydro Lite, same performance, just a 6 year durability claim instead of lifetime, and the Lite is easier to apply. Visually, you can't really tell a difference between Hydro and Hydro Lite, so you're still getting the bleeding edge of coating technology. If you use my link below to purchase the coating, as soon as you add the C6 Hydro Lite coating to your cart, you will get a $15 discount. I put all the links in the description, but here they are for you: C6 Hydro Lite ceramic coating: bit.ly/3yeW0Wh C6 Adhesion Promoter Polish (APP): bit.ly/3UU6OSm Foam coating applicator: bit.ly/3JSaLRj First coating levelling towel: bit.ly/3UNgtKx Second plush coating buffing towel: bit.ly/3UwAUdh DIY Detail Gold Standard Polish: bit.ly/3WwLbsy DIY Detail Gold Standard Waffle Pad: bit.ly/3wgWEC9 DIY Detail red jeweling pad: bit.ly/3JQgln8 DIY Detail dual action random orbital polisher: bit.ly/4bpvqb8 DIY Detail rotary polisher: bit.ly/4b7se4p DIY Detail Rinseless Wash: bit.ly/3URj8TG Lake Country System 4000 pad washer: bit.ly/3ybFear Phendo polisher (for applying C6 APP): amzn.to/49FJXyf CarPro DarkSide tire dressing: bit.ly/3rF8xPM

[@aarongrantthebulk]

I’m only part way through the video so sorry if it’s answered. Can we use Diamond, and then use this one over the top? Get the best of both worlds? And is there an estimation of hardness/scratch resistance?

[@C6ceramics]

No, one layer only. All C6 Ceramics coatings contain Refined Detonated Nano Diamonds. The coatings are 9h, but hardness in a coating does not equal scratch resistance.

[@C6ceramics]

Coatings are swirl resistant, not proof. The way I explain it to customers is with a sheet of steel. If you place a sheet of steel on your concrete floor, you can drive and walk on it and it won’t bend. This is because the substrate is as hard as the sheet of steel. When we look at the coating it’s 1 -2 microns thick, paint is 100. Coatings are 9h , Paint is 5-6 h. The 1-2 microns will not harden the 100 microns under it. To illustrate this place a mattress under your sheet of steel. Now walk across it, it will bend, twist and deform. The mattress under it will remain unharmed. How a coating reduces scratches isn’t only because it’s hard, it’s also due to the reduced coefficient of friction. To illustrate this to a customer invoke the image of a mesh bag with nails sticking out of it. Drag the bag across the sheet of steel on the mattress, it will scratch the sheet of steel, but the mattress will be unharmed. Remove the sheet of steel and drag your bag of nail across the mattress, it will rip and scar the surface.