My WORST Spray gun investment EVER!!

[@Horsenb]

Thanks Trigger . Thats what its like trying to spray rust paint straight from the can. It's hard to dance that slow.

[@HackMasterBlaster]

That’s one gun I’ve been wanting to try but every time I see a video like this I realize that im probably not missing out too much. My top 3 clear coat gun chooses are my workhorse sagola 4600 1.3XL clear cap, ws400 1.4HD series 1, and the pro lite 1.4 TE20 cap. I don’t see the need for much else. Good video my guy 👍🏻

[@thetriggerman954]

I have those 3 guns and you're absolutely correct true workhorses 😎💯🤙🏼

[@kbrasshc]

Just did a hood with it last week, got halfway through and wished I had used my Sagola 4600X.

[@thetriggerman954]

😂 yeah man slower thing I've ever seen. I couldn't imagine doing an overall with this gun

[@sideshowscot7815]

Hey trigger. I remember you saying that you got shot of the DV1 clear early on in the channel. I have been using my Porphis for most jobs lately. I have the split nozzle too. I increased the fluid and pressure a little and despite the great results I have had, this time, she taught me a lesion🤔😛. I normally set at just under 2.5 turns out at just under 2 bar. Turns out that fully open it goes to around 4 turns out so it is capable of pumping out some serious material. I found out the hard way by trying to speed the gun up. It ran spectacularly 🏃‍♂🤦‍♂. Great work on the channel. Im off to catch up with the channel. Oh did I see mech earlier? Maybe a spray jacket? Spray on brother 🤜🤛

[@thetriggerman954]

😎💪🏼

[@dogstrucksnotherstuff]

Interesting on the DV1. Thanks for the real time footage...that is slow! Great video✌️🙌have a great long weekend!

[@thetriggerman954]

You got it my man. And yeah that's straight turtle 🐢 action there. Thank you for watching. Have a great weekend 🍻🍻🍺🍻

[@georgeg8130]

100% agree, i have this gun in my collection too. I think the only gun that will match your style will be SATA 5500. DV1 clear is nice if you want to multitask. Check text messages, emails etc. while clearing... And this job looks amazing as usual....

[@thetriggerman954]

Lmao 🤣🤣🤣🤣🤣 dam multitask man that sounds like some shit I'd say you're 1000% correct. Thank you for watching George

[@gregoryjowers3629]

Looks good trigger i bought iwata kiwami 4 over lph400 because of price and the hype on the kiwami 4 I learned my lesson on get what you pay for sometimes it’s better sometimes it’s not. Well enjoy your weekend brother

[@thetriggerman954]

No man 😭 I told like 10 people that. They message me saying that kwame for is the new LPH400 what should they purchase I'm like don't believe that bullshit there is no other like the LPH 400. But you are the actually the first person that went out and purchased it and came back with confirmation on what I said. Or any of you guys reading this LPH400 IS UNDEFEATED FUCK A KIWAMI 😝😝😝😝

[@gregoryjowers3629]

@@thetriggerman954 that’s right the kiwami4 worked me I was spraying targa truck bed cover with Napa base coat and I was using the fc 720 clear coat I had to turn the pressure up 30-32 spray clear to get it to lay down the over spray was heavy compared to the devilbiss prolite,I still have my first paint gun devilbiss jta I bought 24yrs ago

[@vasiliskaradimos]

Kiwami is the new generation off iwata guns and have different names on air cups....kiwami BA4J is the new Bellaria....kiwami wider4 J2 is the new w400...kiwami wider4L-J2 is the new lph400....i have the BA4J and its a great gun....i think the air cups is exactly the same with old guns...because i have the old lph400

[@mikhailSRT4]

Both my dv1 spray well. But I agree clearcoat hs or uhs clear dv1 needs to be sprayed slower.

[@thetriggerman954]

Yes sir 🐢💨

[@lesliwells5433]

speaking of slowly am ordering a 1.2 split nozzle, and 1.3 split nozzle with the aeropro and see what is faster for me, and what atomizes better, thanks for the idea to be a CHEMIST

[@bosshawg7427]

Aeropro offers a split nozzle now? I know it's based off of the W400 and can use the same parts, but even an aftermarket split tip setup seems to cost more than the gun

[@lesliwells5433]

@@bosshawg7427 IT"S ABOUT EXPERIMENTING WITH WHAT YOU HAVE,I WANT BETTER ATOMIZATION,SO I HAVE DONE JUST THAT,SAME AS ME SPENDING EXTRA MONEY ON A PORPHIS,NOT NEEDED,BUT I LIKEE

[@user-paullynch]

You looked like you were touching the bonnet with your jacket mate , what you doing trigger man 🤣😂🤣👍🏻

[@thetriggerman954]

Well lucky for me I wasn't touching it 😉

[@user-paullynch]

@@thetriggerman954 love your videos dude 👊🏻👍🏻

[@thetriggerman954]

​@@user-paullynchyou know what you're right!! it was touching the hood on the base coat lmao i just went back to watch. I'll have to work on that. Good catch 😎💪🏼

[@user-paullynch]

@@thetriggerman954 you’re still the man 👍🏻

[@bosshawg7427]

Ouch! Welp.... taking that off of my dream gun list. I dont mind a little slow on base so much, but I've sped up my clear application times.

[@thetriggerman954]

Hey you never know it might work for you if I recall you spray a lot of 4:1 clear So it might be right up your alley 😝

[@bosshawg7427]

@@thetriggerman954 yes I do spray 4:1 mostly. Lol. But I also like hammering it on in this Florida heat with a 1.4. I'll stick to the LPH400 and FLG5. lol.

[@thetriggerman954]

@@bosshawg7427 smart man 🤓

[@itsturbinetime]

Hey Trigger I slipped and fell into the hood while I was painting it. How do I get this paint off my face? Thanks bro.

[@nocandopdx]

You're exactly right, the people who love the dv1 are spraying 4:1 clear so they don't know any better. Or 2:1 reduced clear like you said, but what's that opinion worth?

[@thetriggerman954]

Yep 😁 spraying soup though a gun 🤪

[@ozarkoverlandoutfitters9218]

Iwata ws400 is my favorite i was a sata guy for 25 years and the iwata changed me

[@thetriggerman954]

Iwatas came and took a lot of the Sata guys lol in the early 2000,s that's what everyone had you were either a SATA guy or an Iwata guy

[@ozarkoverlandoutfitters9218]

@@thetriggerman954 I started back with a sata jet 90 when I switched to a gravity flow gun spraying spies heckler clear at 60 psi fogging like crazy but laying down like glass. Times have changed for the better these days for sure

[@thetriggerman954]

@@ozarkoverlandoutfitters9218 jet 90 🤩🤩🤩 still got mine 💪🏼

[@garynewman4908]

I get it. I'm slow with my clear. It gives me a chance to make sure it goes on flat and even. I have one and there not cheap!!!

[@thetriggerman954]

Good I'm sure it works for many 🙌🏼

[@OldBondoBilly]

Hey T, that’s kinda funny; my CV1 knock-off puts out plenty to go fast😅😅

[@thetriggerman954]

It's Awful B.Billy fkn Turtle gun with a hefty price tag.

[@OldBondoBilly]

@@thetriggerman954im too cheap, anyway🤣🤣

[@JohnWD40TC02]

Hi Trigger, have to say I do like the way you tell it as it is with no bull💩it's good to see you aren't loyal to one brand and I totally agree that the DV1 is a slow gun but it lays the clear really nice, I do like my DV1 clear gun but it doesn't get a lot of use just for that reason but the silver base gun with the B+ aircap is IMO the best base gun I have used and the one I use the most for basecoat👌 Thanks Trigger and I hope you are having a good weekend👏🙏👍John UK

[@thetriggerman954]

Thank you John. I'll always keep it real with a no bullshit approach even if it's not the "popular" opinion. It's my experience with these things and have that right to give MY opinion. And as you can read in the comments many many many many many guys in the industry feel the same way but no one speaks out about it. Thank you for watching John Hope you're having an awesome weekend as well God bless ❤️💪🏼

[@JohnWD40TC02]

Yeah there is no point doing a review if you aren't going to say how it really is as you will get more respect from your followers if you keep it real mate👏👏 I'm good here thanks Trigger🥰🤭👍

[@3Wheels1Block]

Wow bro! I have a generic of the DV and it performs really well. I'm glad I didn't opt to spend more LOL

[@thetriggerman954]

I have the replica as well and it's twice as fast and four times as cheap 🥴😅

[@3Wheels1Block]

@@thetriggerman954 😂 I guess the replica was an upgrade 😂😂😂

[@fluorescentmug8333]

I recently got the Eastwood lt100 it’s on sale for 68$. Going to paint soon

[@thetriggerman954]

That's a decent gun. I have it and it's faster than this and puts out a nice finish

[@lesliwells5433]

@@thetriggerman954 YES VERY NICE,ESPECIALLY WITH SPLIT NOZZLE,I LOVE THE FEEL OF THIS GUN

[@lesliwells5433]

i got my gun for the same price, can"t be beat

[@Sumkindawonderful]

This gun is very slow, thought I got a defective one.seems to use more material than all my other clear guns

[@thetriggerman954]

Yes uses more material for sure and yours isn't defective it's just a 🐢🐢 if you read through the comments you'll see it is what it is.

[@Sumkindawonderful]

Had it for a couple years, heard that c2 cap changed it! Didn't speed it up at all.but, I do use it for candies like rr and 46v.works good for those where it needs to be atomized well and not much build

[@thetriggerman954]

@@Sumkindawonderful good idea 💡

[@clist9406]

The slow gun reminds me of one a paint rep brought over and hyped it up so much , He was a new rep trying to get us to switch suppliers . I tried it and immediately stopped . Threw that gun across the shop and barely cleared the bay door , yelled at the paint rep to go fetch that POS and don’t ever come back

[@glossworx617]

Video is on point 💯. Paint on brother 💪🏽

[@thetriggerman954]

Thank you brother 👊🏼 spray on brother spray on

[@johnpoccia4981]

I love that gun for clear 22psi the c cap it didn't seem that slow to me as watching you move that slow,but everyone sprays differently

[@thetriggerman954]

🐢💨💨💨

[@johnpoccia4981]

@@thetriggerman954 🤣🤣🤣🤦‍♂️🤦‍♂️🤦‍♂️

[@lesliwells5433]

The wife and i are cooking's enjoy the rest of your day triggerman

[@thetriggerman954]

Bless up King ❤️

[@justice5699]

Hey Trigger, hope your day went well. I hear you man on that DV1 clear gun. I bought one about 2 years ago and have only used it once, like you said "It's a turtle" hahaha. I only sprayed a hood as well. It's in storage now. The DV1S mini gun is faster man, for real. Looks really good but just too slow. Have a blessed weekend bro.

[@thetriggerman954]

Hey what up Justice yeah man mine was in a shoe box for the last year, and as I'm replying to you the gun is now back in that same shoe box lol my LPH 300 small gun with a 1.2 is faster than that gun. Have a great weekend my man 🍻🍺🍻🍺

[@justice5699]

@@thetriggerman954 Just chillin for now man. Dog days are here. 101 degrees and climbing up during the week. When I get that sprayer out (DV1), it's just to help out a homie when he out of school with bars if you know what I mean. If I can help anyone out to get em on their feet and out of the streets, I'm all in to help em out hoping they can start sprayin soon. He man your channel almost at 10k! Hey if you can't respond on comments when I drop a question or somethin, don't worry bro. You have a special way to communicate with the painters community, keep up the great work and I appreciate all you do. Be Blessed

[@thetriggerman954]

@@justice5699 I'll always reply to every message. Hopefully your friend gets out and on his feet. I know exactly what you mean. I was there and this trade saved me from that life. Bless up King ❤️👑

[@georgespangler1517]

I'll stick with my spectrum HTE for base and back widow HTE for clear,, I'm not paying over 200 dollars for a spray gun

[@thetriggerman954]

Smart man

[@tonydiesel3444]

Everybody likes to run a 1.2 or 1.3 way too small everything I have is 1.4 everybody wants to use HVLP for clear sometimes I think clear and it slows the gun so slow it's terrible

[@thetriggerman954]

Certain guns I run certain tips with. You just have to know the gun and which tip it performs better with. It's not a one size fits all.

[@jamessakimae9655]

Did the same as you trigger bought the gun sprayed and didn't like it, second time using put on the 1.4 along with C2 and i damn near threw that gun at the wall. I'm convinced the only way that thing will move is if you're running a 1.5

[@thetriggerman954]

Damn 1.5 😱🤣 seems most guys have had the same issue. So for the 1% that's in the comments saying the gun is not slow 🤷🏼‍♂️

[@davidfernandez7425]

I got 4 *DV1*s sold one of them! Bought them all from devblliss rep! The guns that say for demo purposes olny'' got them all cheap $350 each one" now i wish i haven't''! This guns are slower than a grandma walking the st!! 😵‍💫😵‍💫

[@thetriggerman954]

Exactly man. Hopefully this sparks up enough comments of people experiencing the same thing so we can prevent someone from making the same mistakes that we did and spending their hard-earned money on this expecting something different.

[@TheHumblePaintSprayer333]

Great video man, i love that colour, it was a bit slow but the finish looks bang tidy 👌,thats a massive bonnet too, I've never used one it but it looks like lays it down nice coat of clear, would it be fine on smaller panels like wings and bumpers or is it just to slow for you ? Thats still a lovely job man 👌👌👌

[@thetriggerman954]

Thank you my man, I suppose it would be okay on smaller parts but truthfully who wants to buy a spray gun that is limited to do only small parts I have a high water LPH 300 1.2 that is a smaller medium sized spray gun and even that thing is faster than this I seriously would not advise anyone to get it not even a beginner. Thank you for watching my man Have a blessed weekend 🙏🏼🥳

[@INKCEO]

Great video ... DV1 should be ashamed

[@thetriggerman954]

😉❤️

[@BryanMiranda96]

Worst spray gun purchase would definitely be the DV1 clear for me, I bought one after getting the Base gun in the B1+ cap and i found the Base gun was faster AND better at clear than the clear caps. The opposite of it and the happiest purchase has been the ANi Skull for me, i bought a kit to play with at home, liked it enough to buy another full kit to use as a dedicated clear gun and the older one as a base gun, and a standalone Skull in the 1.2 that ive really liked for metallics. Honestly if my work contract didn't require me to use Satas id be using these Skulls. Gave my at home 5000 RP's to my brother who just started a paint tech course at the loval community college. Ive got 20 rebuild kits just in case they stop making them in a few years 💀

[@thetriggerman954]

Bro you're rebuild kit inventory is overkill lol I've got say the guns that are over 25 years old lol But yeah man that DV1 is 💩 on the speed.

[@BryanMiranda96]

@@thetriggerman954 better safe than sorry man 💀 I've still got a new in box LPH 400 and OG Tekna

[@paulstanley9950]

Grab an ANI skull 1.2 clear gun, one of my best guns

[@thetriggerman954]

I have that gun, with a 1.2, 1.3 and 1.4 I got it my man. That's the gun I sprayed the GMC with last month. Video up check me out brooooother 😉😎💪🏼

[@travlite8496]

I hate the damn thing too,i said the gun was way to slow to the gunman on here and he said no it wasn't.BULLSHIT the gun is a turtle.

[@thetriggerman954]

Remember they spray thinner clear coats over there. That's why the SATA jet CC clear coat gun is not available here in the US because our clear coat is so damn thick. They even tell you that on the website. So naturally if someone is spraying a thinner material the gun is going to move faster. Like I said in the video there's a lot of trickery out here and some of these guys really don't know the difference and they go out spending their hard-earned money because someone's doing a magic trick and their materials are completely different.

[@davekennedy-ex6qk]

Hi TriggerMan, a beautiful finish as usual, another novice question for you, is it ok to paint the base coat and then spray the clear coat 24hrs later, thanks

[@thetriggerman954]

No sir you would have to scuff the base coat again there is a window you have It's probably a couple of hours. Clearing over base that has set for 24 hours it will just peel off later down the road.

[@davekennedy-ex6qk]

@@thetriggerman954 Once again. thank you for your help and knowledge

[@thetriggerman954]

@@davekennedy-ex6qk anytime Dave

[@Ontheroadbrogymgo]

Is that the C2 Plus cap, or the original cap that it came with?

[@thetriggerman954]

It's the C2 cap

[@davidharrison8397]

Never used one .....i know they're expensive as hell too ! Hood turned out nice

[@thetriggerman954]

Trust me you ain't missing nothing brother lol Thank you for watching 💪🏼

[@ANDY-we7mr]

HI MY FRIEND TRIGGERMAN JUST GOT THAT PRO LITE 1.3 WITH THE TE10 AIR CAP DO YOU LIKE IT THE DEVIBLISS PRO LITE 1.3 GOOD VIDEO BY THE WAY TRIGGERMAN THANKS FOR SHARING THAT INFORMATION LOVELY COLOUR

[@thetriggerman954]

Thank you Andy ☺️💪🏼

[@kevindenman6041]

I started out with a Techna Copper gun, was amazing at everything, super glassy clear and base was always super flat. Then it started to sputter while spraying clear. Rebuilt the gun with new seals and still same. Sprays base perfect just not clear. So I picked up a DV1 and its a really nice piece but have not been able to get my clear to go on flat and glassy, kinda sucks for what is costs. I always thought it was my inexperience that was causing it. Might be time to try another brand. Just really love the techna copper wish I could get it straight to spray clear again. Thanks for the video's, always learning new stuff and making the jobs easier each time.

[@thetriggerman954]

You're more than welcome Kevin. That sucks 😕 expensive gun and not meeting your expectations. I think devilbiss guns are great it's just one bad apple

[@nocandopdx]

If you rebuilt the gun and something is still wrong then there's a good chance you have dried clear built up on the inner passages. Don't know how you clean your gun but if you got a little bit of thinned out clear coat into one of the holes that supply the air to the cap (not on the air cap itself, but inside the gun typically behind the nozzle, there are two or more holes) and if either one ever had some material backflow inside, especially clear coat, then that would be the culprit. One other thing you can also try is get yourself a 10x jewelers Lupe and inspect the tip of your nozzle, needle and air cap horns up close for deformations or dents/scratches. Definitely could be a source of turbulence. Also after you spray basecoat, look at the horns on the air cap and see if both sides have the same amount of paint dried around the holes. If one side is always ends up with more overspray, that would be a clue. Throwing new parts at the gun without knowing what's actually wrong with it and why you're replacing them serves no purpose. It's like fixing a car that's overheating by getting new brakes, new tires, new windshield wipers, etc. Pointless.

[@thetriggerman954]

@@nocandopdx lol the gun is just slow. That's all to it

[@nocandopdx]

@@thetriggerman954 i was replying to the guy with the tekna problems lol But that's pretty hilarious you must have read that in the voice that you do. Oh i know it

[@thetriggerman954]

@@nocandopdx oh 🙈😜

[@JaminGalv]

A tip I saw you used a tack rag as you used the static gun we got one recently and they told us that to tack off first and then just pass the gun by itself like if you were spraying the plan because tack rags create static believe it or not

[@thetriggerman954]

Yea the tack rag creates static if you move fast with it. I try to go pretty slow with it. My booth is so dam big and old I'm afraid to blow withouts tack rag might stir up some dust. But I'll give it a try. Thanks for the tip JaminG😎🤜🏼🤛🏼

[@jiujitsuhawaii]

I demoed that gun you do have to move slower. I think my iwata w400 atomizes better. Thanks for the video.🤙🏽

[@thetriggerman954]

You have to move slower? 🤔 I didn't even notice that 😂

[@dennisgray7509]

Good information to know man thanks

[@thetriggerman954]

No problem 👍 😎

[@cabrezzy7838]

hey trigger can you get the sata 1.3cc cap for clearcoat? I want to hear your thoughts on it

[@thetriggerman954]

My rep told me it's not good for our clear coat over here the way our clear coats are formulated. That's why we have to buy it from overseas because it's more suitable for their products over there. My rep advise me against it so that's not anything that I would purchase. And I doubt they would send me one to try. So we might be out of luck on that one

[@haule8418]

how is the dv1 base with sealer? is it a slow poke too?

[@thetriggerman954]

Nah that gun is on point. Very nice gun and moves too.

[@Snip59]

With my guns use a 1.3 works for me just used to it I guess.Back in the Lab Trigger yes another great clip.Phil in Sydney.it's amazing some expensive guns well depends are NO better then the more cheap guns I think.Cheers.

[@thetriggerman954]

You're absolutely correct 💯

[@Snip59]

Cheers Trigger have a great weekend my friend.

[@enforced_viper6066]

I spray my paint at a a lower than normal pressure and usually 1.4 2 bar or 28-30 psi fory clear but i set my gun to wide open and i dont pull my trigger all the way back so it is slower my being me i pay attention to every inch of detail in my paintjobs

[@thetriggerman954]

That's why you are the man 💪🏼

[@glen4407]

I have a dv1 clear I hate as well. I turn the fan in to speed it up. I mostly hate how the clear atomizes.

[@thetriggerman954]

I turn the fan in some as well. And still 💩

[@glen4407]

I tried my dv1 again. For waterborne base it's really good. I cleared with it as well. Ended up fan in 1.5 turns and 24 psi. I did not play with psi, started high and seemed ok so just went with it. I used one at paint training for base so I decided to try it again. Water can handle a slow gun as it always lands wet.

[@venytaha]

Wow that’s super slow! Definitely not a HS gun.

[@thetriggerman954]

🐢💨🐢💨🐢💨

[@bradleyyounger8499]

Still not cheap lol.. thats why I looked at the porphis to get back into painting again part time

[@thetriggerman954]

You ain't wrong for looking into the Porphis. 🙌🏼💪🏼

[@bassdaze]

what gun did you say was $250? i didnt catch it, im looking to buy a budget friendly gun so i can paint a couple trucks here at the house... Saw you video on Black Widow HTE... i've painted 3 show cars and a driver back in the day but would like a better gun than thw $20 throw away i sprayed them with from HF

[@thetriggerman954]

The Porphis PRD 717

[@bassdaze]

@@thetriggerman954 thx man appreciate the reply

[@jasonevans6720]

Totally agree, why did they do a hvlp clear coat gun, not as good as a pro light

[@thetriggerman954]

Stupidest shit ever. Went backwards 😔

[@mitchellferre1652]

They gotta try to reinvent the wheel. When they don't, it's time for the hype. Make it shiny and expensive. Some will buy it no matter what.

[@northwestoff-roadopportuni7176]

Man I’ve e been painting with my Kiwami 4 and I really want to try that Porphis pro 717

[@thetriggerman954]

If you're spraying with the Kiwami it'll be a nice upgrade for sure

[@stephenjones4013]

That car looks amazing finshed

[@thetriggerman954]

Thank you Stephen 😎🫵🏼🫵🏼

[@frankartale1026]

You need a 1.4 dv1 ... or a Satajet 90 1.3sl or an RP 2000. Those guns are fast !

[@thetriggerman954]

I have everything that you just mentioned. Take a look at the channel 😉💪🏼

[@frankartale1026]

@@thetriggerman954 I figured you did ! I have watched a few of your videos a couple days ago. I was making paint videos in 2007 with old digital cameras. I laugh now because i probably could have had a big channel if i kept it up. This was before people even had iphones and androids so filming in a shop was a little tough back in the day.

[@joewolf4483]

You need to do your pull-ups a little longer with your right arm so you get a little more reach ... awful close to the side of the hood ... came out beautiful though ... good to see you wear your cover ...

[@thetriggerman954]

🤷🏼‍♂️ now you see why I hate big trucks 😭 go go gadget arms 😂

[@ProtouchCarCare]

Hi. What static gun are you using?

[@thetriggerman954]

Uniceltec ecogun amzn.to/4bCM3R6

[@scottgagnon9451]

Never liked that ,too slow. They have now come out with differant tip and it works better

[@thetriggerman954]

And which tip is that?

[@nocandopdx]

We'll find out when it comes out lol

[@zerozero1944]

🤔why not stick to the same BS ? vs going thru some BS ? do they really pay you to go thru the hard tyme?

[@thetriggerman954]

Right on 🤙🏼

[@lukeowens3544]

Dv1 clear was my 2nd worst investment 🤣 it got demoted to wetbed real quick. That’s funny because the c3 cap is the only reason I have used it for basecoat 🤣🤣🤣🤣

[@thetriggerman954]

Hmmm dedicated wet bed gun now that my friend is a great idea 💡💡 😱😱

[@lukeowens3544]

@@thetriggerman954 yeah most expensive wetbed gun 🤣🤣🤣🤣

[@thetriggerman954]

@@lukeowens3544 that's when you know you're a bad ass painter when you have a $800 wet bed gun 😎😱🤦🏼‍♂️🙄

[@lukeowens3544]

@@thetriggerman954 putting it to use and still keeping it ready to rock the c3 cap🤘

[@lukeowens3544]

@@thetriggerman954 I tried the base cap for clear (not the b-plus cap) it does speed it up a bit. 2 holes apiece instead of 3. One full turn on the fan. It’s better but I don’t think the gun is capable of chugging clear😂 even 1.5 .. I tried 🤣 it’s a good gun for mirrors and motorcycle parts🤣

[@enforced_viper6066]

I will stick to my iwatas my 2 1.5s and my 1.4

[@thetriggerman954]

Especially since you are spraying those big truck fenders 😎💪🏼

[@enforced_viper6066]

@@thetriggerman954 them are front caps to 500,000 pontoon and now i actually spray the metal to some colors and man weve been having alot of color issues its such a pain

[@enforced_viper6066]

@thetriggerman954 2025 colors are insane metallic green metallic purple tiger eye pearl theres 10 new colors

[@ANDY-we7mr]

TRIGGERMAN iam so glad you showed me that I was going to get one later on think I be getting a Sata jet 1 3 CC or IWATA SERIES LS 400 1.3 DIGITAL 😊

[@BryanMiranda96]

Are you in the UK? Because the CC is made to work with their clears, spray guns direct will sell you the CC but they recommend against it for the clear coats here and having used the CC nozzle set in my x5500's I would say they're right, it's mediocre for our systems

[@thetriggerman954]

Finally somebody knows what the hell they are talking about. I've been saying that for the longest but people think I'm crazy. My Sata rep told me the gun will not spray our materials that great over here. And if I purchase it it's against his recommendations.

[@kingsway731]

So the black widow is supposed to be copy of this, or at least it says so on the HF website. I think it was slow but not like this here

[@thetriggerman954]

Naw man I have that gun and it's faster than this

[@nickcrill7718]

Yeah way to slow for me sometimes I feel like my Sata 1.4 I is too slow. Almost to 10k followers! Hell yeah!

[@thetriggerman954]

A SATA 1.4 could never be to slow. It's only because your clearly project for almost 2 hours anything would feel slow doing that 😂 and yep 10k soon 🙏🏼😱

[@nickcrill7718]

@@thetriggerman954 hahaha yeah after about an hour of clearing non stop as fast as you can you’ll want a fire hose. You should have seen the seen the guy who died. He was painting cars for 28 years then boats for 16 years. He would go faster then me get super close and not even look he just knew it was good. You’ll get to 10k in no time!

[@stephenjones4013]

Trigger are you on the gram I got a question about Dupont clear wonder if you can get hands on that in Florida?

[@thetriggerman954]

Yea I'm on there triggerman954

[@thetriggerman954]

And yes

[@stephenjones4013]

@@thetriggerman954 just added you and sent a message

[@mikasantos3774]

Hahahahahaha my boy trig did it again he always got glass 4 Dat azz

[@thetriggerman954]

Thanks brother got to keep it glassy for them. 😎🤜🏼🤛🏼

[@georgespangler1517]

9:52

[@thetriggerman954]

😜

[@hondamanh22a]

Would cool to see your tier list of fastest and glassiest. Keep feeding us the good videos

[@thetriggerman954]

Ok gotcha, I'll work on that. Thank you for watching 🤙🏼😎

[@rockycaruso387]

Looks good 👍 but that looked extremely slow.. I'm surprised your arm isn't hurting

[@thetriggerman954]

It was terribly slow 😭 But these arms can handle some weight 😝💪🏼

[@rockycaruso387]

@@thetriggerman954 - I remember those days but sadly they will weaken as the sunsets pass.. 💪🤔

[@thetriggerman954]

@@rockycaruso387 nooooo 😭😭

[@blademan4043]

3M performance gun would kill this job in half the time.😁

[@thetriggerman954]

A spray bottle would kill this job in half the time 🙄😬

[@luxe-kustoms]

Its a dang good gun, But Its SLOW, did i say S---L--O--------W! I used mine the other day, coming from the Sagola 4600, And hahaha, i was robot spraying and Lordy it was DRY spray from hell, (I was spraying white, so i was blind) and saw it and about died laughing... The DV1 reminds me of the HF Blackwidow 2.0 gun as in speed wise. Booth will give you a stellar finish, but speed it key in production (Which i am not in..) Im more of finish so doesn't matter, but i would rather have speed...but speed can bitecha! Kicking butt on the content sir, Next im in FL, ima come shoot with ya....PewPew

[@thetriggerman954]

Definitely bro You come to Florida Make sure you hit me up as far as the black widow man I think the black widow will run circles around this DV1 I have many guns that are faster than this shit 😭😭😭😭 And I'm not in a production shop either but I still don't want to sit in the spray them moving like a zombie from walking Dead 🧟‍♂️🧟‍♂️🧟‍♂️🧟‍♂️

[@andrelawrence9644]

😂😂yet they complain lph400 is slow

[@thetriggerman954]

Yeah and "they" is crazy as hell. That's what I was saying in the video a lot of these people just talk just to hear themselves talk. Then that confuses guys out there.

[@aaronwlkr]

I just do not understand how the market got so flooded with guns, and so many of them are expensive as fk. It's not rocket science, it's a shaped block of metal with holes in it. I get paying more for a gun that transfers paint better, and maybe saves you money that way, but $800+ come on..

[@thetriggerman954]

I guess because now days more people are painting than back in the day bigger market, professional and DIY and everyone thinks the grass is greener with the newest shiney gun. Chasing that GLASS 4 THAT ASS 😱😱

[@wrightsrrt871]

Dv1 seems like an waist of money and time !

[@thetriggerman954]

BINGO!! 💯

[@wrightsrrt871]

@thetriggerman954 yah I was going to buy to teckna pro lite series but the 3 gun series was $1,400 when they came out but instead I bought the black widow lol and it sprays good to me for fair price I just dial the fan back about half turn then adjust the air and flow !

[@timgiesin4025]

Wow that is slow

[@thetriggerman954]

You seeeeee lol

[@lorettapiper]

I love that color.

[@thetriggerman954]

Paint you nails that color LoLO 😉

[@shaqhobson5074]

Bro you trippin trippin. The dv1 clear gun is one of the three spray guns I regret selling. To each his own I guess.

[@thetriggerman954]

You're right to each their own and if you read through the comments you see I'm not alone. You did the right thing by selling it follow your heart 😝😉😂

[@shaqhobson5074]

@@thetriggerman954 🤣🤣🤣

[@clist9406]

The main point it , shitty gun and you still laid it down like a Boss

[@thetriggerman954]

Lol I won't say it's shitty. Just slow 😭 but thank you my man 💪🏼

[@dollabillbrunson8107]

lol….I knew it! You been complaining about this gun for a minute 😂

[@thetriggerman954]

Now you see it in real time how bad it is. Awful 🥴

[@dollabillbrunson8107]

@@thetriggerman954 No doubt! I have cheap guns that spray faster with good results! Smh! Hopefully they make a new cap for it….they really should!

[@deanbrown7643]

Trigg production shop no !! Custom jobs yeah all day long 😊😊

[@thetriggerman954]

🤨 Mr Brown 🤨 we need Chinese UK Technology man you know that 😉😂😂😂😂😝😝 whaaaat up brother

[@deanbrown7643]

@@thetriggerman954 not online that much tbh bro my wife is going through some health problems, but I watch things when I can 😉😉

[@paintworkbyjr]

That dv1 is a great gun but slow as fuck and heavy like double d titties. Another great video man.

[@thetriggerman954]

Lmao 🤣🤣 you're damn sure right. I forgot to add that to the complaint on the video. You're definitely have some Popeye forearms after doing a complete overall paint job with this sucker. Thanks for watching my man 💪🏼🤜🏼🤛🏼

[@EJ1James]

Too slow lmao I sprayed with it twice been collecting dust ever since Vevor got in my hands 😅

[@thetriggerman954]

James tell me you're kidding?? You spent all that money on the gun and have only used it twice?? I remember when you ordered it 😭

[@EJ1James]

@@thetriggerman954 Remember when I said it helps beginners lol not knowing distance and speed with a gun that puts out a lot material is all I needed 🥶

[@thetriggerman954]

@@EJ1James yea you did say that 😂 dam bro. Well hopefully that C3 speed cap is coming soon 🙏🏼

[@EJ1James]

@@thetriggerman954 like you said I don’t think it’s coming but I’m hold on to it just in case

[@joblo2299]

The dv1s is worse❤😂😂😂

[@thetriggerman954]

👎🏼 😁

[@lesliwells5433]

get run off the job running that slow

[@thetriggerman954]

You're fired!! Come back when you have a faster Gun

[@lesliwells5433]

@@thetriggerman954 THAT"s a good one trigger, you have to use that in your lines,YOUR FIRED,GET A QUICKER GUN

[@richardblanke5521]

😱🐢🐢🐢🐢🤣

[@thetriggerman954]

💩🐢💩🐢💩🐢💩

[@tripleeathletics]

I just flagged 50 hours while you were doing your last coat Bruh… LMMFAO!!! 🫢😂🤣🤣🤣

[@thetriggerman954]

🙄🤦🏼‍♂️ and I'm sure you were not using a DV1 either. Show off 😜

[@ErikisOfficial]

I guess its fair to say this spraygun is a easy skip 🏌‍♂️

[@thetriggerman954]

You can bet your ass on that one Erik 🤓😝

[@cliffjohnson5687]

Triggerman I need to buy me a new spray gun you probably already made a video but which one do you like better ws400 Series 2 or sagola 4600 I really value your opinion

[@thetriggerman954]

@@cliffjohnson5687 everyone I know personally that has the series 2 says it's just like the series one they supposedly fix some little tweak that I never even found wrong with my series 1 If you look around on KZbin people actually doing giveaways and giving their series 2 away even JR paints is selling his set of serious two guns because they are not what people thought they were going to be so I'd save your money there. I don't think you can go wrong with a 4600 they are priced right and our damn good spray guns. That ANI black skull edition is one bad ass gun too and priced even better.

[@cliffjohnson5687]

You know I used to watch paint Society but all I watch now is your channel you're the man

[@thetriggerman954]

@@cliffjohnson5687 I tell everyone you benefit more by watching all of the channels and taking a bit from everyone. He's a good teacher over there. And does a better job than me when it comes to explaining these things so don't do yourself a disservice watch him and everyone else and absorb everything you can, and use it all to be the best painter you can be 🤜🏼🤛🏼♥️