N Scale Motorized Gate INSTALLATION from Model Train Technology.

[@SFCRambo60]

That drill has a center drill, so you can start from underneath and go so deep and than go on top and put the center drill in the hole so you will have a clean drilled hole.

[@ModelTrainTechnology]

That was our plan but sometimes things don't according to plan on live TV! You will see that we used that approach with more success in the HO project. Also, it helps folks who see that it doesn't have to be perfect. Thanks for the feedback.

[@nickelplateroad63]

That Seems Pretty Easy To Install. I Assume This Comes With The Signal Decters In The Kits HO/N Also I Am Guessing You Can Daisy Chain Two Across From Each Other?

[@ModelTrainTechnology]

"yes" for both questions. In fact, you can daisy chain as many detectors as you like.

[@sturnie1]

I've been looking for those for years ALWAYS out of stock I am sure you guys will become billionaires off these lol

[@ModelTrainTechnology]

Not hardly! LOL! Thanks for the note.

[@richardweathersbee2269]

If you cut or drill a hole half way thru the bottom and then half way thru from the top you the hole will be cleaner and no splitering of the wood

[@ModelTrainTechnology]

That was the idea! Live TV , we just went right through!

[@tammylovescats]

I wonder if you could find that for ho scale?

[@ModelTrainTechnology]

HO is also available.

[@tiaedge562]

What would you use to trigger this to operate

[@ModelTrainTechnology]

Any of our Precision Detectors can be used. You can also connect a mechanical switch to the Gate Controller.

[@bobpovenz1552]

My depth is 2-3/4” with styrofoam. How do I address that?

[@ModelTrainTechnology]

The 3/4 Plug sets the crossing and then you can have up to 4"~6" of piano wire to the motor. Glue a small shim under the styrofoam and place the motor pad on that. Let us know in your order that you need extended wires.

[@johnnyrobertson5971]

What about HO Scale any plans???

[@ModelTrainTechnology]

Also Released!! VIEW OUR CHANNEL: @MODELTRAINTECHNOLOGY

[@elleryparsons2433]

That Looks Good don’t Needs To be Touched.

[@ModelTrainTechnology]

Yep. ;)