Nerf Mod: The Dart Zone Pro MK 2 (Getting Inside and some New Parts)

Support the channel and my craft at: foamproshop.com/
Would you kindly subscribe? tinyurl.com/Sub...
vvvvvvvvvvvvvvvv---( Keep Reading) ---vvvvvvvvvvvvvvvv
________________________________________________________
______________________________________________________
Vlog Channel: tinyurl.com/Dra...
______________________________________________________
Patreon: / drac
______________________________________________________
My Instagram: / lorddrac
______________________________________________________
My Facebook: tinyurl.com/Dra...
______________________________________________________
My Twitch: / profile
______________________________________________________
Thanks for watching!!! Much Love, Nerf On.
My fanmail address is:
Drac Thalassa
4426 Hugh Howell Rd.
Ste. B 192
Tucker, GA 30084
#DracNerf #DartZone #OnlyOnePro

[@matthewbertram4312]

"I'm going to keep this lock around." 2020 has taken its toll mentally. I hope Drac is OK.

[@timrichter5853]

ive noticed he seemed different in the last few videos too.

[@justajolt]

Hasbro, you have some catching up to do! 11:07 'or a foregrip' why stop there... Thanks for the strip-down. I'm excited to get my mits on one for when Nerf-warring starts up again.

[@makeitgo]

The barrel is too short for the upgraded spring(s). The dart is leaving the barrel before it could take advantage of the full power of the spring.

[@thetaminus2334]

Oh god, a super shorty shotgun sounds nuts

[@FelixstoweFoamForge]

Yup.

[@En1gmatic1]

Solution brass barrell with just about an extra 1.5 inches, also gives enough to add a shorty scar barrel from RMods74 on etsy to maintain the "real steal" compact profile with an added silencer. Or maybe in this case a spring spacer to shorten the spring but increase power would be a better mod to avoid changing out the barrel

[@Crunkboy415]

@@En1gmatic1 I 'm hearing a longer brass barrel doesn't help either. I have the MK2 but at 80 bucks I'm going to wait awhile before modding it. I think it's because the plunger tube is duel purposed as a pusher, so it primes back as a reverse plunger, but primes forward and fires as a direct plunger, so no dead space exists. Unless you make a longer plunger to fit a longer spring the stock version may be at its optimum power.

[@ldcommando1616]

I’m getting more RoboCop vibes from this than Desert Eagle but that’s just me.

[@DeisFortuna]

I mean, it kinda does, yeah, but that's only really while you have the big chungus orange tip barrel extension stuck on it. Without it, it's a far less RoboCop feeling, more realistically designed pistol. Also, fun fact about RoboCop (the original. Not the shitty attempt at a reboot): they were, in fact, originally planning on using a Desert Eagle as RoboCop's gun of choice, because of how big it was, but once the Armour and other overall bulkiness of RoboCop in comparison to a normal human got added into the mix, they realized it looked more like a normal handgun, and sought out and modified a Beretta 93R to use to create RoboCop's Auto 9 instead.

[@jtrx753]

It does look alot like his auto-9 though

[@wonder7071]

I know right

[@jonathanbills1238]

Definitely Robocop vibes that blaster looks exactly like the Auto-mag 9 from Robocop

[@aman12214]

Said the same thing on his last vid of this blaster

[@nickvencill7752]

You just know that some gloriously crazy person is gone a make a pump kit for this bad boy

[@chancejones5958]

Hmm... looks like Drac had a close encounter with a fellow vampire. Or he got shot in the neck with a paintball gun.

[@yurithepinnacleofall6569]

I also saw it but not sure what it is

[@chef2397]

hickey

[@frankmayberry647]

Had a hot date. Rock on brother!

[@misellus3931]

120+ fps out of that tiny little plunger tube is actually insane peak engineering right here

[@Trollo_Swaggins]

If you put a knuckle guard on it, it’d be the M6C from halo 2 or halo 3 ODST with the barrel shroud

[@MistahFox]

Definitely getting some automag vibes

[@boyceavenue]

I love that you’re wearing a Milgauss! I have that exact same watch but with a blue dial ✌🏽 keep up the good work. Love your channel.

[@TheBigChad]

Okay so that’s completely random. One of my favorite musical KZbinrs commenting on my favorite foam cannon reviewers

[@markdahlia9543]

Toy side arm: *exists* People: "man that's giving me real (insert popular handgun here) vibes" For real though archon type b?

[@TheBigGSN5]

I hope the Wal-Mart version doesn't fuse the extension on.

[@user-ry9fu6ob6y]

Wal Mart version? Really?

[@stripedpants1668]

I dont know if there will be a WM version.

[@WolfMan-nf4lv]

They won’t. The adventure force toy guns (the ones that make noise and stuff, non dart blasters) literally are modeled after real world firearms, like, there’s an M4 one and an Mp5 one. And there are shell ejecting prop pistols modeled after real pistols, one of em I recall being modeled after a 1911 (they’re actually really cool, magazine fed and everything) and all those have are toy safe coloring on em and they make electronic noise. So I doubt they’re gonna force you to have the extension on.

[@B0x_T00l]

@@WolfMan-nf4lv He's talking about the Adventure Force pro series such as the Nexus Pro and the Aeon pro

[@Luke_212]

I hope if they do make a Walmart version they would make the magazine detachable and it would go into the grip 🙏😁

[@The_Elite_Emerald]

Dart Zone Pro has become sort of the Novritsch of Nerf

[@gasketblower]

Very nice! Looks great, and so does your ponytail 😂

[@gasketblower]

@@tomdongerson1474 wellllll... They’re dead...

[@mydogisdoug3449]

I just finished Jedi: Fallen Order!

[@btherogue4994]

It was pretty awesome when the music lined up with Drac removing the screws

[@kingpin7666]

Well I’ll be, a "good to go in stock form" from Drac. I think this is a first

[@connerturner529]

You're going to hit a performance ceiling just because of plunger tube volume with anything so I wouldn't be surprised if dartzone already has that thing pretty maxed out with as small of a plunger tube as it has.

[@FortyTwoBlades]

A brilliant sidearm addition to the Pro line. Thanks for the glimpse at the internals!

[@andrewkarlyt1860]

I remember meeting drac and I still have his signed blaster and it was really nice to meet him

[@muscl3beard]

of course drac puts his hair back. bring back 2018 drac

[@beast0339]

I think it looks, or certainly handles like the Steyr-Mannlicher M1912

[@stevenbobbybills]

Well, it reloads similarly, but I don't think the physical resemblance is there.

[@retrotechstuff7683]

totally agree with the way it looks and handles i may have to customize one!

[@optiTHOMAS]

Indeed! Very cool design and internal magazine! Love that old pistol! It's so damn cool!

[@Boxrobly]

Someone needs to make this mag fed i could try if it were to be available here

[@wadekirby8575]

The feed lips on the internal magazine are spring loaded so the pusher can move through them, you'd have to make similar feed lips on the detachable mag.

[@jaw1173]

Omg 😱 look at the nexus pro grip

[@LordDraconical]

Im always up to something. “Coming soon”. ;) sharp eye

[@eastlake_kicks]

@@LordDraconical i noticed that to

[@jaw1173]

@LordDraconical I noticed it in ur twitch stream for the dzp mk 2 but couldn’t comment cuz I don’t have the app

[@rogerramiussergeialexander5541]

I can't wait to replace the handle scales with knurled wood ones when I get mine. 🤣

[@h0w17z3r]

I feel like that the magazine follower could be shrunk a bit to give it a +1, of course that would make the speed loaders a bit off. After seeing 8 round hammershots i feel like anything is possible

[@ishootfoam992]

wow the stock blaster had a better spring than most 3rd party alternitives thats new

[@yellowprime8491]

I'll love the inevitable crazy cosmetic barrel extensions the community is going to come out with to make it look more Cyberpunk 2077 / Shadowrun/ SciFi looking

[@matthewc0225]

I am a big fan of internal overview videos. If I ever decide to get ''fancy'' with a new blaster, it's nice to have a reference for when things go wrong and I forget what goes where. Although it does look fairly simple...still Thank you for making this...EXCELLENT VIDEO!!

[@trentencraig5622]

Try putting in a lower spring because of the small plugger tube it might give a better air delivery

[@robsmith6245]

I wanna see how it works with different barrel lengths and if we can fit a scar in the stock muzzle.

[@hyperjohn6627]

I would love to see a 3d printed slide with piccatiny for a red-dot.

[@DBZSeanzie]

Instead of swapping the spring focus more on keeping a better air seal. You’re losing air all up in that gat

[@bz4701]

Pretty pint-sized powerhouse!

[@ArTchN_Ei8ht_Industries]

Hey @LordDraconical would you consider a loop or "T" pull insert to take the place of the claw in this and/or the Aeon Pro so it doesn't impede the line of sight of any targeting systems that can be added to the top picatinny of both blasters? Just a thought. Happy Thanksgiving.

[@emmetmcdonnell9721]

I think I know what I’m asking for this holiday season

[@PhoenixFyre]

It's good to know I can pick this up and keep it unmodded. That claw might aid in dual wielding. Maybe a holster that accommodates the barrel tip add-on or a barrel tip add-on that's a little more streamlined?

[@congokael8087]

I’m glad that you weren’t able to improve the performance- merely because that speaks to the original design, and that they didn’t hold back in what they are providing us! I love the stubby front piece, though and I will have to pick one up once I can actually get my hands on a MK-2!

[@Godsire69]

Drac did the MK 2 mod today with your parts. Love it.

[@albey1816]

Just wondering if the darts are loaded into the grip from above - why did they not just make a magazine to go up through it from below - like a real pistol?

[@jasoneel76]

Space

[@kyzer6749]

Drac. You know you want it. You know we want it. We know you want it. We know we want it. Lepus.

[@indigo_whiskey]

ODST SOCOM Magnum vibes with Combat Evolved Magnum performance, you can't beat that

[@xangle-w-7513]

Hey drac, what if you made a extended mag for it? Like you would take a shell the same as it and dremel out it then put plastic to extend the grip, also to go with it, you could make a bigger clip for it For having the bigger shells you could have a secondary or primary MK. II

[@poisxnashley]

could you even just shave down the follower to maybe accept another round?

[@xangle-w-7513]

@@poisxnashley you could do that and fit another round

[@doomachine8914]

Hey drac, in your opinion, what do you think the chances are that someone finds a way to give the mkII a grip fed magazine system? I just a appreciate lower profile pistols and I feel like the venturi is too big of a blaster to me.

[@itismiguel6526]

Can u make it so the slide comes back and a cach so you can reload

[@iron9973]

well the spring is probably matched to the plunger tube volume and the barrel I.D and length ,bigger springs need longer barrels .A bit like how the worker gen 2 blue short dart kit is power tuned for the elite plunger tube and a 7kg spring

[@aman12214]

When you poped the casing i was thinking if you could cut the bottom there no reason you could exten the capacity downward would just need a fo magazine like the glock 17 extended mags. You just need a longer maybe more robust spring. Let alone conver it to mags but that will come next modle im sure there no reason it was skipped for this. Unless there some other reason besides cost.

[@H3zzard]

If the Mk2 arrives here, I shall make haste towards FoamProShop as the stock barrel extension does look a bit weird.

[@musickrocks]

When i looked at mine the plunger head doesn't really seal with the plunger tube, blaster still works well, maybe you could improve performance if you fix the seal?

[@ClassicRedEye]

You know its a good product when even dracs mod guide includes nearly no mods xD

[@samtoshner8002]

Makes a lot more sense why this blaster is priced how it is after seeing it taken apart. It is very nicely made. Originally I figured the accessories were a big part of that cost, since it came with so much kit. But now I know better, not to say the accessories aren't also a nice addition. Overall a pretty sweet package. Expensive, but totally worth it from what I can see.

[@TheOnlyPedroGameplays]

I'm pretty sure they released a 5 dollar pistol that shoots 100 fps out of the box

[@justindawson4815]

Why not offer the safety delete in red? So you don't even see it.

[@saeriroux]

I was hoping the claw had been more low profile and svelte, but it's nice to see all of these options regardless!

[@ianfarquharson3772]

It helps when you own Deagles to say that it doesn't look like 1😅Are we all waiting on Michelle to design an afterburner for this lil beauty????.ThankQ.TkEZ>UK

[@seancagney-kerzich1134]

Only thing I might change is I might upgrade the spring the catch may upgrade if I can find one that's metal but all in all I'm happy if the MK2

[@Frslow_armani]

Gotta love waking up to a new drac video! Starting the day off properly 💪🏽

[@godzilla51196]

Reminds me more of a Brügger and Thomet MP9 with the overhang on the back of the grip.

[@rzrider683]

Would love to see a spring that downgrades it to endwar fps levels :)

[@bladpalace3728]

New to the hobby, got my blaster yesterday and little brother dry fired it twice on accident, my question is, what breaks? What would I need to replace later in the future?

[@Shangoo]

I wish it had a removable mag. Would legit be the coolest pistol if it did

[@nathanschropfer3416]

The magazine can be extended with a dzp magazine and some cutting

[@tablememecenter5794]

Really gives me Casull vibes with the og muzzle attachment

[@toadbrews1347]

Any chance we can swap the barrel for one of the existing hobby options? I'd love to add a scar and it would be much easier if the barrel stuck out an inch or so past the front of the shell.

[@timothyscholle90]

Do we have a UPC code for it yet?

[@grapeapeductape2489]

Is there a softer spring I could put in this?

[@super8ben]

Drac: **Easily lists and categorizes all important information about blaster** Me: “But can it slam-fire?...”

[@navi.2176]

yea it can

[@vampire847]

Reminds me of the pistol from Halo minus the guard.

[@Nate-pj6nx]

I believe people may be comparing it to a Desert Eagle because of the slide. The slide only really takes up the back half of the weapon instead of your traditional handgun slide that goes across the entire top of the weapon.

[@CaptainResident]

There's no bigger flex than making a mod guide on a blaster nobody else can get ahold of yet.

[@gintama_val]

i'm thinking that this gun can potentially be the first pistol blaster that uses mags inserted in the grip. it would be cool for people that are waiting for a glock nerf gun. just by looking at the internals u definitely can.

[@UncleF115]

thanks for the effort to prove stock spring is the best. is it possible to explore barrel options?

[@tommyg2026]

Any progress? If u put the fungus spring in it,can u even prime it?

[@DoomerYag]

I'd like to see him do a DOOM themed review of the Mega Tri-break.

[@WolfMan-nf4lv]

Aaah, oh well, least ya tried right? I still enjoyed the video nonetheless! Also didn’t take long for you to make attachments ;) lmao not a bad thing though! It’s super fun to come up with new stuff for existing products, like you did with the Aeon and Nexus. I imagine even more so making it come to life with 3D printing! This blaster is super badass. It gives me a mix of robocop’s Auto-9, or just generally a futuristic handgun that you’d see in perhaps a cyberpunk themed game or series. I’ve also got some print ideas for ya: make an orange attachment that looks like the SilencerCo Osprey! And possibly a faux module that looks like a laser/light combo so that pic rail can get some use! And instead of the claw, perhaps an RMR shaped inspired piece can be made to go on the slide similar to mounting the claw, that way it not only gives the same benefit of the claw, but it’d look more tacticool too since it’d look like a reflex sight. I can’t wait to get my hands on one and have some fun with it!

[@PureCountryof91]

Now it needs removable mags.. a g-2 will probably come out and have em. Or hopefully

[@quironmiranda2591]

Hey Drac in the shop I’m having trouble finding the muzzle attachment option for the Mk2 only the rails, and what does the bits mean? I would like more pictures to see what I’m getting. Thanks

[@turtleexplosion5040]

Could you remove the internal grip mag and replace it with a mag well that could take standard half-length darts? This thing with a 20 round mag would be awesome.

[@rachellemorris2646]

Can you do a review on the slat r ball at Walmart I don’t know if I should get it or not. Please?

[@rachellemorris2646]

I meant Splat r Ball

[@itsagundam79]

Are there sniper kits in development like the retaliatior has? What about a barrel extension with angled foregrip for bottom pump action?

[@HelloThere-ul8gm]

Cant wait for the best nerf blasters from 2020 list! Except it will be only dart zone cause they actually put out good products at good prices.

[@thelocalmilkman1533]

I just want to see the slide get a spring return and get a slide lock. Also external Mags

[@jeffersonderrickson5371]

So, dremel dremel, add a talon mag?

[@Gman76257]

You think you could extend the mag with like a talon mag?

[@tomlin19]

Good looking watch bud

[@willihill2]

The "speed load" isn't the biz. I'd prefer a mag load.

[@Pastaa_CEO]

its better than loading it like the kronos but i would love a top or bottom fed mag

[@dallasa9332]

Could a afterburner be put into the barrel extension? 🤔🤔🤔

[@koenkooiman1490]

Ponytail looks good on you!👍

[@biosaber585]

honestly it's closer to a Sig Sauer or possibly even something from the glock line of firearms

[@codenameezekiel5872]

I love your hair draconical

[@bdude6093]

Not first but it is participation that counts

[@christianletzerich6523]

Real guns or not, everyone's favorite gun Jesus' are funny and ponytail-laden

[@Ravenseye8]

Can we still get the shorter orange muzzle at the end of the video? I didn't find it on the storefront when I looked. Thanks.

[@fgarcia2277]

Thanks drac I like to know what I'm getting before I buy it. Good to know that there really isn't much that can be done. Simplified things for me. Happy Thanksgiving!!!

[@m1a1abramstank49]

Would it be possible to have removable magazines for a pistol like this?

[@QuinnForTheWin]

Would have love to see a mod that just skips the planned obsolescence, gut that internal magazine get rid of the quick loaders and make your own 8 round magazines for it lol. I suppose you would have to print a new shell and at that point might as will just be selling your own blasters.

[@prstoxbeats4734]

Without the front barrel attachment it looks like a Sig P365! 😅🍻 Edit: thinkin looks more like Kel Tec cp33...

[@xyon123]

Maybe im ignorant about these things, but could this be a good base platform to create a Halo magnum blaster? I feel like it might be possible for someone with enough 3d modeling/printing experience

[@joshgarlick185]

I would love to see a villainator mod guide. I'm just getting into Nerf and while I can remove AR's and safeties I have quite figured out springs yet. Or actually could you please do a spring guide?

[@brandonkrenk]

Would you be able to mod this with a 12 or 15 half-round magazine through the bottom of the grip?

[@jacksonpalmer8955]

Got a nerf ultra ad on this video, better me than some kid’s mom this time of year...

[@slinger0083]

I really like that shorter ‘glock’ version. Will a version of that be available in the shop soon?

[@greenymacshootface476]

cool but the tip wont come off I could snap it off but that might break it