New DeWALT TOOLS TSTAK MODULAR MOBILE STORAGE TOWER HAS A HIDDEN FEATURE!

[@framergod69]

this system has been out for years it's also branded as stanley fatmax and craftsman versa stack I've got parts from all the different brands and they all lock together

[@drixom9805]

Yup was going to say they were the same as craftsman

[@tatoler38]

Stanley, Craftsman, Dewalt, Mac... All owned by same company.

[@framergod69]

@@tatoler38 is that not what i said. black and decker

[@TacoTeaser]

I have the Versa Stack by craftsman. Does anyone know if the Dewalt system is interchangeable?

[@pdxlife5879]

Thanks for the Info!

[@ToddErnst]

@Vince - I use the TSTAK as part of my tradeshow kit. You are correct that the TSTAK is not as durable as the ToughSystem, but it simply does not need to be for many. My favorite part is that they are interchangeable with Craftsman's Versastack, which is valuable if you're closer to Lowes than Depot and need a last-minute addition.

[@karlsmith6902]

The tough case pluses go onto the case you put underneath the shallow yellow drill case they're all designed to clip together so make sure the toughcases large , medium small all go on top

[@Spencer859]

I've had my t-stak system for over a year and have put it through the paces and its held up great. 100 percent satisfied.

[@drammanky2418]

James Spencer what kinda work you do and how much are these i have aridgid system but all dewalt thought this may be a good option ... i will use and abuse this .

[@jbrandt7]

The smaller boxes will latch on the top of your full size drill bit box (that you put the top box on)

[@chucktaylor2805]

At the 6:48 mark, you stack a large bit kit container onto the T-Stack box. Where can I find those large bit kits at? I never see them at Home Depot or Lowe’s, or even Ebay.

[@nicholasmihalochick5431]

For looking so compact... it holds a lot of tools...nice style and just love the see through tops

[@thomasrogers7614]

@vcgconstruction what’s the model number of the dewalt interlocking bit kit? I’m referring to the longer and wider kit.

[@scottkrueger7021]

What is the Dewalt part # for that tough case drill bit set? I can't find it anywhere.

[@nwood7919]

What is the model number?

[@barrywhite6060]

Does anyone know where I can get a replacement latch for the TSTAK? I order a case from Amazon and it came missing one of the latches. I know I can send it back to Amazon but I just thought it would be easier just to get a new latch online but I can't find it anywhere.

[@chriscolameco6850]

I just switched over to TSTAK and am loving it. Packout/ ridgid/Toughsystem/ect are all WAYYYY to big and bulky for maneuvering through philly row homes. Plus you can do bottom drawers.

[@jeffreybelden2491]

I worked for 20+ years setting up trade shows, and saw these type systems being introduced to the market. Bought one from the exhibitor at the show, used to use boxes and bags and belts for moving my tools. This style I have in craftsman and love it, side locking. DeWalt does the upgrade, gotta check one of these units out. Retired now, but can't give up my tool addictions, and gadgets. Gadgets are the window for the best tools/toys yet

[@gharrett2092]

I have the very first version the one that accordions out into 3 sections but stays one unit. The wheels broke so I replaced them with a push lawnmower front wheels. Works great now.

[@geoffhardy3254]

The medium size bit holder does fit to the large bit holder front to back , u can put one on each side

[@johnysilver1853]

T-STAK is it older than Toughh system by Dewalt? I bought on sale Dewalt organizers for 10$/each and they are not attachable to Tough system where I bought Atomic combo set

[@MufMurderer]

I bought a tstak 3 box kit branded as the stanley fatstak from lowes before they became dewalt like 4 years. MSRP was $120 at the time I got mine for $60 out the door. No sales tax in Delaware. Since then I've added multiple boxes to the kit including the drawer boxes.

[@shaymousshay]

HI ALL ;) vince the small drill bit. driver tips and all the other small boxes. there is a box that all those cases fit into. (DeWalt DT70716 TSTAK Accessory Caddy For Tough Case Cases) quite a smart setup.

[@thefinestdetail7619]

Do you guys not have the tough case caddy to hold all your bit sets in the uk we have that

[@Trickyrocket1998]

Hey VCG! What was that driver and bit system you guys used at 6:50 ? Looks interesting

[@BigDsHomestead]

What kit do you have at 6:51? Thats kool.

[@91PublicSafety]

Craftsman versastack is identical. I really like it personally. Nice to see DeWalt doing this stuff too!

[@chadallen1017]

Mr_W it’s made by the same company because the bit boxes from both lock to each other I have my craftsman bit boxes and dewalt boxes locked together

[@dannyjmeil4645]

I have 4 complete sets of tough system 3 pieces and I bought a couple XL boxes for my 7 1/4” cordless circular saw 6 1/2” saw and 4 1/4” circular saw.

[@handygibby1]

where did you find that big set of bit and drill bits i cant find it

[@112Famine]

I've been wanting to build a water cooled PC inside two of them, one would have the motherboard & graphics card, second would house the radiators & water pump. And use quick disconnects for the water transfer between the boxes.

[@jonbaxley9722]

Can u use the big black tough case bit set to attach the small tough case boxes to the tstak?

[@JohnAeon]

The fact the Handel moves back if you have one stacked on the bottom box is a major selling point. Like the for thought.

[@Rob-Hannon]

I keep seeing that large Dewalt Tough Case bit set in ads and reviews, but I can't find anyone selling it. Where did you find yours?

[@recyclespinning9839]

Handle and wheels look like they catch on steps. Its amazing how many manufactures have this problem. The others that have better wheels like Milwaukee are just too bulky. Stanley has a 3 peice that is pretty good but portable, however its pretty cheaply made and for some reason not sold in USA now...

[@AntonioClaudioMichael]

Very good video vince

[@trepastrepas463]

Please links were can we buy this full set of attachments drils and all that

[@AntonioClaudioMichael]

Wonder if the toughsystem 2.0 boxes and stereo would fit on that tstak

[@VCGConstruction]

As far as I know they do not

[@AntonioClaudioMichael]

@@VCGConstruction same clamps that would be interesting to do a video on

[@tensazero]

When does the bit kit become available and from where?

[@gregoryhale2701]

I've been wondering this since they first showed it off a couple videos ago

[@tensazero]

@@gregoryhale2701 same. Seems somebody wants to build hype. I just want the case mostly... In yellow.

[@elvismartinez702]

Everyone is showing it but I can’t seem to find it online, I want to buy it and maybe paint it red

[@tensazero]

@@elvismartinez702 there's already the craftsman version in red at Lowe's

[@LEO-xo9cz]

How much lighter are the T-Stak cases as opposed to the Tough System?

[@michaelc7283]

Hi Vince, The storage box with the clear top that you thought had a hidden compartment. You can take the top container holder out put that foam insert and now you can see all your tool or batteries you hold in the case. Just a thought for those who use this t-stak unit. Always learning something new my friend. Thanks for the video...

[@VCGConstruction]

Thanks Michael!

[@milangeurkink9917]

The problem with that is that you cant put it on top of other boxes because it has no handle on the top

[@michaelc7283]

@@milangeurkink9917 Oh, i thought you could? It has clips on the sides to be held down. It does have a handle on the front.

[@adambomb7331]

I think you would either have your tools on you, or in the box. Where as, you may not be sure on parts, or quickly need a bit, you can then quickly see if you need more parts on top. Then again, maybe all you have is tools in this, and parts in something else.

[@middymcguinness1645]

Vince were do I get that big t-stak bit and driver box🧐

[@TruthSeekerAi]

FYI under the yellow bins in the clear top box there is bins under it also love the cerwin vega speakers

[@bjarnestrand-henriksen]

How do you keep your tools so clean?

[@drammanky2418]

Cant wait for the 2.0 tough case been hauling dewalt tools around in my ridgid system for years . Ridgid latches are hard to beat .

[@lockiea1]

What is with the Cerwin Vega speakers? Jammin' on some Journey?

[@walterproper9894]

Where did you get the large bit set container?

[@bigbossmgmt9143]

Those smaller bits cases connect to the big bits case you sandwiched in the middle

[@ericafurusa8879]

Awesome thanks for the review

[@zzmalone6720]

Pretty cool! Your subscriber count keeps growing. Well deserved! Keep up the great videos!

[@ATR-Sound]

Also compatible with the Craftsman Versastack system. Good to have options.

[@cipryon2]

also with stanleys, fatmax

[@michaelshaley4356]

They also integrate with Craftsman Versastack. It's really the same boxes in a different color (and maybe a little less expensive)

[@jbrandt7]

Craftsman also has an integrated water seal.

[@briannorthrip]

Vince, the half size Tough-case latches to the new full width Tough-case.

[@TheYpavon79]

Hermano!!!... Qué Juguetería tan bonita y variada tienes en tu casa!!!... Saludos desde Venezuela!!!

[@bensandham8842]

I have to say the t stak boxes are exceptionally durable. I have used them on site for several years with no breakages. I,v used them for hop ups , saw horses, you name it. Can’t vouch for the case with the wheels though,I use the t stak sack truck which is great. So I can’t recommend these enough, reasonably priced too.

[@richardhernandez3088]

Nice you guys great Video

[@ramiloluiz4531]

Qual a modelo/referencia da caixa do minuto 6:43 ?

[@Heizenberg32]

Three thumbs up for more Tstack / Versastack / Husky and other light-weight systems. Overbuilt does not always mean better!

[@dwaynephoenix4947]

instablaster

[@Papaws_Garage]

Where do we get that bit set ? I have the craftsman but would prefer the yellow 😁

[@martinneps9387]

What does this go for what is the price please comment back thank you

[@whosnext2005]

Vince the big bit box with the clear lid should allow 2 the those medium cases to attach ontop and then the small bit containers ontop the medium ones as you know. I know the craftsman big clear bit allows the medium dewalt and craftsman cases and I thought the big dewalt one was the same. Check it out and let me know.

[@rodw]

Thanks 😊😁 Vince !!,!!! Had a Birthday since we last talked. Officially OLD FART now 65 yesterday LMBO now may I have a Sticker? As always thank you for sharing your thoughts and videos Rodney PS I don't know if you remember but I found my 20v DeWalt drill in rain water after helping my mom move closer to me. Not able to resurect it. Sad day 😥😢☹️ in Branson, Mo

[@VCGConstruction]

Happy birthday Rodney, private message me your address!

[@robertmills4980]

Dewalt sells it's own foam pcs that fit perfectly in tstack boxes and you can cut to fit

[@TacoTeaser]

Is the Craftsman Versa stack interchangeable with the DeWalt system?

[@adammorris8112]

Yes they are.

[@AntonioClaudioMichael]

The tstak top latches look just like the tough system 2.0 radio plus charger top latches

[@timberlandbear9762]

I'm really like it for all the organisizazation

[@bhribik21ify]

Great video brother 👍👍👍. Seems like there is plenty of storage in that setup!! Very dope!!

[@tokyomaj2]

Oh man the are a lot of storage pack out organizer brands and Dewalt organizer storage is good too 👍

[@jrelectrician4387]

🙋‍♂️🙋‍♂️🙋‍♂️🙋‍♂️🙋‍♂️🙋‍♂️Very Nice T Stask set........👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼✌🏼✌🏼✌🏼✌🏼Thank you for the info bro🗣🗣VCG👍🏼👍🏼💪💪✊✊

[@VCGConstruction]

👍🏻

[@PaulPeck]

Yeah boys! 🔥👊🏻

[@madbr3991]

It's a shame that the 3 piece kit is difficult to find anymore

[@64gorrilla]

I like t stak and also toughsystem in ideal world is toughsystem same size of t stak so can rack up the same as when tools are in no real advantage also would like vac extractor in tough system size but cant get everything in the uk

[@carlmatischok2469]

Take off top box them smaller bits boxes will clip to the large bit box bro 👍

[@lemquimno4952]

Keep up the good work VCG family. :D

[@mjc8761]

Interesting thx for sharing

[@VCGConstruction]

❤️

[@machscga6238]

Why does no one offer a stackable modular tool box system that comes with DRAWERS? right now I have Milk crates, a dolly, and bungy cords.... I see no reason to spend $300-$600 for a storage system until they offer some ****ING DRAWERS. IM GETTING REALLY IMPATIENT FOR A PACKOUT OR TSTACK WITH DRAWERS... VINCE PLEASE TELL THESE COMPANIES HOW IMPORTANT DRAWERS WOULD BE SO YOU DON'T HAVE TO UNSTACK THE WHO SYSTEM TO GET TO THE BOTTOM.

[@bdek6558]

Are they interchangeable with craftsman versastack?

[@dougw9239]

Yes they are. I have both and they are interchangeable.

[@mariacarneglia8483]

Keep up the good work, VCG! 👍🧰👍

[@bigboundsy]

The little tough boxes do latch onto the bigger tough case u had underneath the top t stak box 😏

[@chadallen1017]

Do the little boxes lock on to the multie bit box? Because the craftsman boxes lock on to the dewalt bit boxes small and big ones and the craftsman big multi big box to

[@nathanpaice7394]

I have the same handle problem with my milwaukee pack put system

[@GEORGEEDWARDBROWN]

I have the same system under the CRAFTSMAN brand for a couple years now. I have 2 complaints about them, the hold too much and end up weighing a ton. I have a 15 pass. van converted to a work van which means the floor is higher off the ground. I have to break down the stack to lift it out of my van or carry ramps, at 77 this is irksome. Also you mentioned about rolling it around and not being sure the wheels can carry the load, I did too, there is not much clearance on the bottom. My solution was to buy a new axle, same diameter but longer and put larger dia. wheels on. I put the old wheels back to fill their space and prevent the axle from bowing, then put the new wheels on, these wheels can be of a better quality to withstand being dragged around a construction site. Sometime this summer I'll fix some kind of lifting rig to load/unload it from my van.

[@trithan1473]

I love the innovation of modern packouts. Ridgid wins for simplest design and value for money, DeWalt is a step up and Milwaukee is the best if you can afford it

[@JesusSanchez-vs8jp]

Muy buena explicación maestro

[@aski8161]

TSTAK attaches to Versastak.

[@westtennesseeprepper2552]

Hey Vince the med sand small tough boxes go together

[@AntonioClaudioMichael]

Wow thats neet that tstak and toughsystem are compatible that's amazing love the options very impressive

[@rustykc]

Hey Vince and the Very Cool Gang, I have an idea for a review or head to head. (Or maybe you can give me your opinion since you've used all of them I'm betting) I have a lot of the older 18volt dewalt tools and I'm slowly upgrading to the 20volt system. I really want to update my 18volt reciprocating saw to the new compact 20 volt XRP or maybe the 20 volt non XRP or that new 20 volt XRP that is full size. I cant seem to make up my mind if A) it would be worth dropping the cash cuz my 18 volt recip saw is still working just fine but want to upgrade it and not sure if the newer saws would be worth it and B) which of the new 20 volt saws are the best bang for the buck. Thanks for your concideration and time.

[@elvismartinez702]

😂 I thought you where going to say and if you don’t know about windows click on the video over here 🤣🤣🤣

[@bigballox6454]

I do love an 'organazizer' 😆

[@TheAtherion]

Its not the latches that break , but those tiny bars of plastic they latch onto ... i d say dont carry more than 2 boxes latched together (my top box is no longer able to connect to anything ... )

[@robertmills4980]

I just got that bit kit its awesome

[@dougfressh]

Those lil organizers attach to the larger organizer

[@alexfaylona4007]

I wish I can win that or the TSTAk and review them like you do...

[@AJB2K3]

Cool, I wondered how they attached to the units.

[@caseyjones2782]

The new tough case you have the big one with the drill bits nut drivers inside Will except the smaller tough cases on top they inner lockand the new 2.0 Tough system storage will except new tough cases

[@bsmetalwork8287]

Excelente produto

[@kingofthecrease30]

CONGRATS TO VCG ON 210,000 SUBSCRIBERS !!! 👍👍

[@VCGConstruction]

Thank you for the support king!

[@BradMyers]

Still waiting for the Toughsystem 2.0 to be released.

[@Zack16Fair]

I wish I got this instead of the tough system I now have.

[@joshbenton810]

I use the t-stack sytem in the back of my ute for my tools(plus a carrier bag)- my SDS, grinder, and impact wrench have their own cases, I have the top case with a multi-tool and miscellaneous gear I dont use often, but has drill bits etc. I then have a deep case(without wheels) that has my sparky belt and multimeter, with my impact sockets, circular saw and battery on top. Then the large wheeled case is at the back of the tray, with gear I have handy but almost never use on my current job, since I cant actually wheel it anywhere on this site (blowtorch, spare impact driver, all the other random crap) And then a tradesmans bag with my drill, driver, bits, batteries, chargers, hand tools I dont keep in my belt but use often, which I take onto site and use every day. plus obviously my belt with normal gear

[@thomasdavis610]

Vince and CPO they have the skill cordless worm drive with one battery $299 plus extra free battery

[@VCGConstruction]

Wow, that’s an awesome deal!

[@Aepek]

Do wish my Milwaukee bit organizers would attach to my packout without adding a modification, unless I’m just doing something whacky, lol

[@davidwriston5696]

Your small bit cases DO latch onto your larger bit case that latches onto the t stak boxes

[@carbb5760]

Packout best for me but gotta appreciate some organazizing 😂😂👍

[@MistAtsiM]

Now if we can all just work together world wide... 🤔 That's something to think about

[@MarcosVinicius-cr8xs]

Iam from Brazil!!!!!!