Neway 1990's valve seat cutters

This video shows some Neway (Sykes Pickavant and Sealey make similar ones) valve seat cutters in use on a 1275 mini cylinder head , Quite expensive new but they do last a long time and also can be found relatively cheaply on ebay. For single angle at a time or more recently 3 angle cutter bits have been made although i haven't tried them.

[@RwP223]

Did a 16 valve head, no problems using cutting fluid, a solid pilot, and proper technique.

[@breebw]

blimey, I used these just after I completed my apprenticeship. All pretty space aged back then.

[@Sternhammer89]

I picked up a second hand set with a couple of cutters for around £120. Only had a 45 degree that would fit inlet and exhaust. Have priced up a 30 and 60 degree from Neway (sometimes on eBay). Did a test cut ok but could do with the two handed rotating adaptor to ensure better concentricity.

[@paulotorresdearaujo6057]

Como conseguir essa ferramenta de retificar sed de válvula ? Moro em Teresina piaui

[@ojeeralimohammed8399]

I would like to get of this

[@user-sj6ub8gq5m]

Hi teacher All engine are same are 3 angles?

[@midway27272727]

not all the same

[@Right-Handed_Neutrino]

Are there cheap knock-offs that can have Neway cutters installed? I'm sure the center rods are important too

[@Vmaxporsch]

You might be able to find something on ebay

[@andresignorini2469]

onde compro esse kit pra envio a brasil

[@kutube9160]

Hallo sir, i want to ask what number do you use in this one box?

[@AmysylleLavador]

Saan tayo maka order nito

[@durveshimran9194]

Hi

[@macondesperreira4410]

Custa quanto um quite desse?

[@Vmaxporsch]

you can find them on ebay from 30 dollars each

[@AmysylleLavador]

How to order this

[@Vmaxporsch]

look at ebay or google search neway valve seat cutters

[@phucthinhinh5523]

Sao mình có thể mua đc sản phẩm trên

[@Vmaxporsch]

check out ebay

[@krishnachauhan2388]

How and where to get purchase it

[@Right-Handed_Neutrino]

Ebay. Expect to pay over $600 for a near complete set as shown.

[@dale116dot7]

You can get new ones from Cylinder Head Supply. They are a bit expensive and they work really well in my somewhat limited experience. I’ve done three cylinder heads with my set.

[@ShaikhNasir-it4nu]

Yah tools Hamen order karna hai

[@BabbuSingh-hg6he]

Hello bhai