Nitrous Oxide 101 | How To Install It | How To Wire It | And What It Feels Like!

In today's video I go step-by-step on how to install a nitrous oxide system on your vehicle.
I go over the plate system to put under the carborator, how to plump the Nitrous and fuel solenoids, how to wire the solenoids to the arming switches, and how to wire the arming switches to the Nitrous BUTTON!
I talk about octane, ignition timing, spark plug heat range too!
I also show you how to hook up Install and wire up an entire purge system!
all you need to know to get your Nitrous system installed and on your way to pushing the GO BABY GO button!
#nonamenationals #classiccars #chevy #diy #howto #tutorial

[@keithiverson6687]

A few points for clean up of the install: - fuses off the starter solenoid, you will want to protect the circuits at the closest point to the source. Fire risk - put a grommet in the hole through the firewall that the wires go through, the wires will chafe through the edge of the hole eventually and cause a short. Fire risk - you will need a blowdown tube to vent the bottles burst disk outside of the passenger compartment, required for tech inspections at the track and good practice if you are driving on the street. If it vents off while you’re in the car (collision) you’ll end up gassing yourself and the passengers. - the arming switch for the purge button is unnecessary, if you want an extra switch it’s fine and it fills the panel I guess. You could just piggyback from the arming switch. - the ground wires would be better placed under the dash, less moisture exposure and less wires passing through the firewall so less corrosion risk. Nitrous is the gateway drug to power adders, my friends and I started installing nitrous in everything until the cost and hassle of filling the bottle felt like a drug addiction payment plan. Then the superchargers and turbo installs started.

[@spraym88]

About as SIMPLE of an install as it gets! If your just trying to hook up a quick Nitrous Plate kit, this is a great way! Nice job man

[@mikeperez7993]

Thanks I appreciate you taking the time to post this.

[@newguysgarage6802]

@@mikeperez7993 thanks for watching it 😁

[@jasonm3007]

Im doing research thanks great info . all this math mathing and mapping

[@thestonedhedge77]

Well Detailed Video ! Thank you ! Great 👍🏼

[@reesehooperr8906]

Dude good video I'm building a 535 BBC thinking nos thanks

[@davesaylor5135]

Made a big difference thanks for sharing love that mustang hood looks good

[@newguysgarage6802]

Thanks! It definitely is a lot of fun! 😃 Thanks for watching 😁👌

[@jodypierson3137]

Are you going to have to get posi now? I noticed some 1 wheel peel marks

[@newguysgarage6802]

Ive got the rear set up to were both wheels spin even with the open diff. 🙂 That road is just so dusty the marks dont always show up, but plenty of video showing it 😁👌

[@twomedicine]

Great Video!

[@geeder9086]

That Cutlass had uneven compression when you took that shot of it starting -- at least one, maybe 2 very low holes (hard to tell when the starter spins so fast).

[@HeadFlowInc]

Be sure to read the timing line/indicator on the sparkplug strap. Visually inspect the plug for shiny specs on the porcelain and verify the timing line on the strap. Plugs tell the truth! 👍😎

[@newguysgarage6802]

But that only works if you have new plugs in 😅 Right now my timing line takes up pretty much the whole strap because of all the testing and tuning I had been doing over the years 😂

[@HeadFlowInc]

@@newguysgarage6802 Be careful 👍

[@HeadFlowInc]

@@newguysgarage6802 There’s an old adage… “The cheapest guy pays the most”. This makes a lot of sense if you think about it. 👍🙃😎

[@johncalhoun8011]

Very informative. I'd rather come to you, to have you install Nitrous for me. 1991 OBS Short Bed Chevy Truck

[@laautoworks]

🤘 Get that rubber line off there bro! Other wise very cool informative video

[@newguysgarage6802]

But its so cheap and affective! 😂

[@fckjoebdn1776]

Granny shifting, not double clutching like you should, you're lucky that 100 shot of nos didn't blow the welds on the intake. 😂

[@newguysgarage6802]

Hey man, I live my life a quarter mile at a time 🤣

[@devotedanaheim1575]

Great video

[@newguysgarage6802]

Thsnk you! 😃

[@devotedanaheim1575]

@@newguysgarage6802 what kinda solenoids do u use

[@nickstephens2913]

Zipties for throttle linkage , Holy hell !

[@newguysgarage6802]

Key feature 😁

[@slohachi6433]

Zippy throttle response

[@garielgrenadius7564]

VERY nice setup. You may want to install a mini fuse block next to the starter solenoid, just to be safe.

[@newguysgarage6802]

Thanks 😁 Thats why I said you can add relays or fuses if you want 😅

[@biggcwrldtv]

Does the exhaust affect surroundings? Harming the environment?

[@newguysgarage6802]

Environment is fine, has been for billions of years lol 😆

[@biggcwrldtv]

@@newguysgarage6802 right...lol..what I mean is will the exhaust affect a pedestrian walking if a car passed by with the nitrous oxide?

[@biggcwrldtv]

@@newguysgarage6802 some people may have an allergic reaction to the exhaust

[@newguysgarage6802]

@biggcwrldtv no more than what the car would have done before the nitrous, once its burned its just like any other exhaust 🙂

[@nickmcminn2137]

Ive seen ppl use a spade clip to limit total timing

[@newguysgarage6802]

Ive done that too lol 😆 But they dont last too long 😅

[@nickmcminn2137]

​@@newguysgarage6802yeah true. I had to weld mine. Im at 25° initial and 36 total on a stock 289 distributor with pertronix. My engine wont run below 20° initial

[@newguysgarage6802]

@@nickmcminn2137 im tempted to just take the springs off and wire the plate to lock the timing 😅

[@markorr1874]

when you taking youngin for full blast run ?

[@newguysgarage6802]

Mabey when she is older lol Got to be somewhat responsible 😅

[@markorr1874]

@@newguysgarage6802 your no fun

[@johncalhoun8011]

Where are you located?

[@newguysgarage6802]

@@johncalhoun8011 near Brainerd MN lol

[@johncalhoun8011]

@@newguysgarage6802 Dang🤣

[@Yo-mamashouse]

I thought you always hook nitrous to a throttle activated switch and shifter buttons are for line lock.....unless your in a movie...

[@newguysgarage6802]

Its your car lol You can hook the nitrous to whatever you want, no rules say you can't 😉 Hell hook it into the wipers if you want 😂

[@johnnyturbo8460]

How do you know that? (I asked)

[@newguysgarage6802]

Google rabbit hole trying to look up what jets to use lol 😆

[@johnnyturbo8460]

@@newguysgarage6802 lmao 😁👍 I had to ask

[@NathansMoparGarage]

Well it didn't blow up.

[@newguysgarage6802]

Nope! It's been eating a lot of nitrous 100hp pills at a time 😅

[@NathansMoparGarage]

@@newguysgarage6802 It wants more

[@firepinto]

Looks like you have a lot of rubber hose to switch out for NNN. lol

[@newguysgarage6802]

Ahhhh......ya. 😑 Pain in the ass.....lol

[@approachingtarget.4503]

You need more jewelry.

[@newguysgarage6802]

Eventually lol

[@fireintheholeagain]

Looks like someone is going to make a harbor freight run for a wire feed flux core welder 😂

[@newguysgarage6802]

I can't weld to save my life 😅 Otherwise I would have had one a long time ago 🤣

[@fireintheholeagain]

@@newguysgarage6802 Well, I was a professional welder at one point in my life but now I just do it on my own projects or side work. Practice makes perfect 😁👍

[@davedoolttle345]

The WTH wiring 😢

[@JohnDavy-rn2on]

That’s the worst so called install in my life! Are you serious? That won’t make it out of your shed!

[@newguysgarage6802]

Well considering I've already gone through a full bottle of nitrous like that without issue, I'm going to have to say you are wrong 😂😂 You can't argue with results 🤣

[@JohnDavy-rn2on]

@@newguysgarage6802 Yeah you can’t fix stupid either

[@newguysgarage6802]

@JohnDavy-rn2on you can call it stupid till your blue in the face......while im driving it around and spraying nitrous flawlessly 😂😂😂

[@JohnDavy-rn2on]

@@newguysgarage6802 You are a total hack

[@tacobaskin862]

​@@JohnDavy-rn2onand sometimes some old dude on KZbin can't pull his head out of his ass.