Nez0's Bad Shoppe @ Strickly Sidewayz: Yokomo SD 2.0 "Super Drift" Shakedown Lite Tune

[@Joe-r1e8m]

I love watching your shakedown videos Nezo ! The passion you have for RWD drifting ,and helping others succeed is amazing.

[@totallyrandomuser5760]

Drilled 4 hole pistons with the smallest bit in the set (upgrade from 3 hole ones I warped by drilling wrong and ran in local comps for half a year) and now I have that boioioing oscillation with Yokomo side grip springs, ran well on concrete

[@sammygonzalez7627]

Freaky awesome to watch, with a good driver in the controls 👍

[@Veteran99-00]

Sounds exactly like what I have done…😎 Mine is -2 toe out -4 camber front -1 camber rear It’s sick now. Love the videos mate keep up the shakedowns 🤘🏻👍🏻 I just finished building my MD2.0 it’s awesome and sexy 🤩🤓😎🥳

[@BadShoppe]

Heck yiss great success!! Thank you for watching! :D

[@jujus04lightning]

Love my SD2.0 changed out the front springs to get rid of the bounce, running -4° camber rear, -5° front, Acuvance xarvis xx, 10.5 fledge with high torque rotor, Acuvance Blaze capacitor, Gyd550, sp03 servo & rear mounted esc.

[@BadShoppe]

Heck yiss :D :D

[@Frankenslide]

This is identical to what I just ordered how do you like it

[@bakko9302]

Nice! Come to think of it. As the new knuckles are close to the old design I bet you can use the 45 degree ballends and a couple of spacers instead of the straight one on the front lower arms so that you can move the front lower arms all the way to the front and still be able to make use of the stoppers to keep more of that full lock goodness. And compensate with a 2.5mm spacer on each of the top shock balljoints because of moving the front lower arm forwards of course 😃

[@BadShoppe]

Yiss I think that is quite possible :D

[@dorifutom.y.1463]

Love the content dude I can't wait till October to slide with ya again!!!!!

[@BadShoppe]

Sadly I ended up getting a bit of covid LOL

[@otherfahad]

Dear Nezo you tried so many high end drift cars, what do you think? If we want your recommendations for top 3 or 5 ? Regards.

[@BadShoppe]

Hello, sorry for late reply. Top 3 right now: Reve-D RDX, SD 2.0 & MD 1.0 Coloured Edition.

[@otherfahad]

@@BadShoppe thank you for your reply, I bought the MD2.0 😅 I will try to live with it 🙈

[@DabbathaHut]

Sounds similar to my sd2.0 lol I run like -7 front - 3 rear and my shocks use the longer ends to give me more ride height. Definitely love mine. I may buy another sd2.0 down the line or the md 2.0 if it’s good.

[@BadShoppe]

I just want the coloured SD 2.0 now :D

[@donnychrisvalen8276]

Nezo🙌🙌🤘🤘🤘,any different between 1.0 and 2.0 SD ??, and also about the handling

[@BadShoppe]

Yiss major handling differences. I prefer the SD 2.0 because of the better handling.

[@umamidaddy7243]

I am a bit of a noob. Are the knuckles the front steering blocks? And did you take the spacers out of that part of the assembly? Thank you for your help and time! And what does that do?

[@BadShoppe]

Yiss knuckles and front steering blocks (where the bearings, axle and wheel attach to) are the same thing. I ran the spacers in the manufacturer's suggested settings (box stock). You can use those spacers to adjust the offset of the wheel's mounting hex block on the front axle.

[@darkvillin]

I just got one of these in purple. I’m not sure which motor or esc or servo to get. Should i get all yokomo stuff? I was thinking of getting acuvance rad and acuvance fledge 10.5t. Idk what pinion to get. Idk which radio set up to use. I am a rookie but i want to buy once. What are your thoughts?

[@BadShoppe]

Sorry for delay in reply. I've been using my Acuvance setup a bit more recently and I love the smoothness of the ESC and motor together. Yokomo's stuff is also nice and the price points are fairly close. The Yokomo system is a bit more user friendly tuning wise but the Acuvance tuning is deeper.

[@freerangehuman7016]

Please help. I have the same car with hobbywing xd10 pro and d10 10.5t. I have seen so many combinations and suggestions for boost and turbo timings. For smooth concrete what should I set the boost and turbo timings to?

[@BadShoppe]

I can't remember exactly the range numbers for that ESC but usually I'm in between 20-30 degrees in booth boost and turbo settings

[@Eurospeedautomotiveofficial]

Hey, what were the parts installed on that bad boy again?🎉

[@BadShoppe]

Which parts?

[@cey8908]

What is the front white spring? Doesn't look like progressive spring to me

[@BadShoppe]

That is correct, it is not progressive, i got that mixed up :)

[@chiccoka]

Do you have any advice for setup a balm v2?

[@BadShoppe]

Currently no as I have not played with my GALM that much yet

[@etlife7471]

why does the rd2.0 seem better than the SD and MD?