Nissan 350Z Gets Cosmis XT006R's!!

[@coffinguy2680]

Hey I really like this setup, can I I get the link to the spacers and the rims?

[@avengednick]

They don't make the bronze any more but I swapped them out for the same wheel in black with a polished lip: cosmisusa.com/collections/all-wheels/products/xt006r-1895-10-5x114-3-bml Not sure what brand the spacers are, just some I had in the garage.

[@23stance]

Looks good! Does the wheel still sit on the hub with the 5mm spacer? And do you have to have extended studs?

[@avengednick]

Thanks! And yes, the wheel does sit on the hub still with the spacer. I also have hub centric rings on them as well. I can’t say for sure if the previous own installed extended studs, but I believe they’re factory and I had enough stud.

[@joshuacarnell6089]

Hi just wondering if you could help I have a set of cosmis rims for my 350z but can’t Seem to find What size hub centric rings I need. Do you know this? Would be very helpful - thanks

[@23stance]

@@joshuacarnell6089 it should be 73.1 - 66.1 I get the plastic ones from amazon

[@johnnymartinez478]

Wish they made 16s

[@thomasgillatt1049]

Love the wheels. What are the tyre specs front and back? 245/40/R18 all round? Is the stretch alright or is it too much?

[@avengednick]

The 123s on the front are a 235/40/18 and the Rears are a 245/40/18. Pretty minimal stretch on both. I don’t care for stretched tires and I’m satisfied with the minimal stretch on these. That being said, the size will vary by brand but you could also go with a wider tire with no issues.

[@ttsupra87]

Regular bronze or hyper?

[@avengednick]

These were regular bronze

[@_Zoctane]

What kind of tires are you running

[@avengednick]

I've run a couple different tires on this car, but in this video it was on Achilles 123s in the front (235/40/18) and the rears are Achilles ATR Sport 2 (245/40/18). The Sport 2s delaminated on the first track day so I'd stay away from those.

[@rainrain954]

You are right, those wheels are fire. What's next!?

[@avengednick]

Thanks dude! And I have a stockpile of parts for the Z including a chase bays power steering cooler, chase bays brake lines, gktech angle kit and FUCA’s. Other things I have on the list for the Z are window tint, KBD front bumper and skirts + paint, and eventually install my nameless hydro with a dual caliper set up. But we’re getting close to getting on to some wagon projects. I spent 30+ last week detailing the exterior and it looks so good, but now I want to get new wheels so it’s all looking 100% haha. Thinking coils, wheels, and paint my Brembos.

[@TheDemonicDeity]

did you need hub centric rings?

[@avengednick]

Yes, I'd suggest them.

[@DoubleVthree]

I got these in white on my z and i fucken love them that bronze you got looks better than i would of imagined. Tbh i was thinking of getting this color but didnt think it would look good with the silver but i was wrong

[@avengednick]

I feel you! I knew I wanted bronze wheels for the car and loved the style if this wheel but I thought the hyper bronze was a bit much and was worried this bronze would be too dull but sent it and hoped for the best. I opened the box and immediately thought they were too light and wound blend in with the silver but once I held them up to the car I was in love.

[@toxicbeast911]

Hey, how would u think the bronze wheels would look on a world rally blue brz

[@avengednick]

Shazam blue and bronze is always a good combo

[@toxicbeast911]

Do you think hyper bronze or the regular bronze?

[@breddy_ale]

You think a 19x9.5 will rub on my completely stock 03 350Z

[@avengednick]

I never ran stock suspension so I’m not sure how much it squats/compresses but I think you’d be ok

[@SK8R6593]

What wing is that? Are those the vertex rep skirts? Thansk1

[@avengednick]

Vertex wing and side skirts

[@itsofficial_brynnn]

Are your rear fenders rolled or completely stock ?

[@avengednick]

They’re rolled

[@yvngsweat1183]

How long was the delivery?

[@avengednick]

I bought them awhile ago but it was like a week

[@studiovulcan4411]

Did you stretch the tires any or went with a good fit?

[@avengednick]

I had a 235 on the front and 245 on the rear in this video, neither was super stretched. Moved up to a 255 in the rear since then.

[@studiovulcan4411]

@@avengednick Did you have issues with 245 in the rear or did you just figure it was safer with the extra +10?

[@avengednick]

No issues with the 245’s, just liked the extra grip in the rear on track from the 255’s

[@laurenzcabigting2579]

Clean set up, quick question. Are you on coilovers or springs ? Thanks!

[@avengednick]

Thank you! It’s on coilovers

[@nicholaswagner6298]

Does your fitment rub or scrub

[@avengednick]

The front rubs a little bit over big bumps due to the angle kit but raising the coils will solve the problem.

[@diegoaltamirano4024]

Am close to Seattle and I found a 350Z with 140kmiles for 4000, it’s all stock is it worth it?

[@avengednick]

There a lot of variables that will dictate whether it’s worth the $4k asking price, like year, maintenance, exterior condition, etc. What I can say is, always get a pre purchase inspection. It’s the best money you can ever spend.

[@diegoaltamirano4024]

Average Bros Media thanks it’s a 2005

[@j-soulfilms]

What is the rim offset on the front? Is it +30?

[@avengednick]

+10 all around

[@j-soulfilms]

@@avengednick ohhh nice! I'm thinking about getting one too!

[@avengednick]

Hell yeah, I love these wheels! Code “averagebrosmedia” will save you 10% if you end up ordering some

[@yvngsweat1183]

I have question I bought the Xt-006R 18x 9.5 all around and bought springs, I don’t know what tire size I should run on the front or rear with the springs? I need help😢 Thank you 🙏

[@avengednick]

With stock angle you should be able to run a 255 or 265 all around without any issue.

[@Justin-hd1cb]

Hey! Do you know what size lugs fit the 18x9 +35 5x114.3? Thanks

[@avengednick]

Not sure what will fit and what won’t fit, I think they’d fit most lug nuts. I’d check with Cosmis directly if you have an odd size you want to clarify fits.

[@kpraz]

wheel and tire specs please

[@avengednick]

18x9.5 +10 all around. Tires shown here were a 235 up front and 245 in the rear. I’ve since stepped up to a 255 in the rear

[@tommyxiong2722]

What the spec on the wheels?

[@avengednick]

Tommy Xiong 18x9.5” +10

[@tommyxiong2722]

Average Bros Media thanks you

[@imLoomz]

these fit with brembos?

[@avengednick]

I’m not sure if this offset does, but if they don’t they just came out with a new offset specifically for big brake clearance

[@imLoomz]

@@avengednick oh,! Thanks bro, i appreciate the response. Im about to buy them right now! 18x9.5 +10 front 18x11 + 8 rear. Only issue, your coupon code has expired! xD

[@avengednick]

Great choice! If you haven’t already purchased I can reach out and get it updated

[@imLoomz]

@@avengednick yeah bro for sure! if you can that would be great! I'm in Canada, so ill be using their CA site.

[@avengednick]

Just got word that all affiliate codes are suspended at the moment while the implement a new ambassador program. It should be up and running soon but totally understand if you can’t wait!

[@isaachernandez1946]

Ayy you from Seattle also 😱 🤙🏽

[@avengednick]

Yes sir! Born and raised

[@jeffz3370]

New sub here...Nice Z

[@avengednick]

Thanks man, appreciate the sub 🤘

[@nueconti1692]

Fire bro !!

[@avengednick]

Thanks dude!