Nissan Sentra Dash Cubby Air Vent Storage Removal

[@stephenlynch8947]

Perfect. Short, sweet, and to the point. Thanks so much!

[@andreaheritage5736]

Wow, great and simple. I saw a video that removes so much more. I think I can even do it myself

[@loreco7751]

Exactly what I needed to know. Cheers mate.

[@constitutionalcarpenter541]

Thanks man that was short and sweet saved my day

[@JonFox1945]

I was able to figure this one out on my own, because mine cracked, and within a week I had to crumble the whole back peice since it was starting to rattle at highway speeds. Good stuff regardless.

[@coolpat2]

Thanks dude. You saved me from breaking up things. I have subscribed to your page.

[@fernandinhohd8620]

Thanks needed this to fix my Sentra!

[@blackcanyongarage]

You don't need to use a screwdriver in the first procedure. You'll also Mar up the dash doing it that way. Open the top cubby grab in the center and pull. It'll literally pop right out.

[@xbrizzcakez]

you are right, I just pulled on the front lip towards the rear and it came right out, another tip is the left vent removes easy as well, and then you can safely remove the emergency wire harness

[@marhar2]

Perfect, just what is needed!

[@user-nl3jm4qt6k]

Thx for this video🙏🙏🙏

[@valed64]

Now how do you install it

[@ansharafi5398]

simle explanation 👍

[@davidenriquez2225]

Thanks for the video bro

[@elreypapielreypapi912]

Thank you bro for your help

[@DanteGaKill]

Thanks Bro 💜

[@jefftaylor8254]

Thanks dude.

[@manuelsanchez4636]

Gracias mi amigo, but like one of the previous guys stated, never pull on wires for various obvious reasons.

[@EricBBarker]

This is exactly right. Unfortunately, they're so badly made with cheap plastic (and a lot of forces from spring system), that they just shatter at the slightest touch. I bought a 2001, and installed a new Stereo on the first day. I gently removed it, and it completely broke. Bought another on ebay, and it cracked the moment I started pushing it in. The plastic screw holes that hold the cubby on through the spring are just awful and corrode over time. I finally just had to deactivate the spring assembly. The cubby opens, but it doesn't stay up.

[@SwitchFingers]

Request. Same car but the middle storage cubby by the e break. Removal or Repair video.

[@giastravelexperience4002]

Where can you buy that product?

[@Aesop101]

Can you show how to get to the air shafts on the same car

[@faizaleddie8325]

Tq for this video brother...

[@ghazwan313]

I have Nissan sentra 2007 is the same way ? Thank you

[@jaysonb.6273]

Sir how to replace camshaft and crankshaft sensor in nissan sentra gx 2008

[@omroyellis5249]

I need one of those to buy. do you know of any

[@carlosgallardo3124]

Good and easy thanks

[@hayshae1]

How do you clean out air ducts out from a 2008 nissin plusa? I think something has died in my air con. Smells so bad.

[@shorty90845]

Thank you

[@ibrahemtabeya4785]

can you help me to find what type of screen I need to place on this car cuz I have the same car , thank you

[@dcrain11]

I ordered a cubby from eBay and when I received it there was no emergency flasher button in it. Are you able to remove the emergency flasher button from my broken cubby

[@TarBreehan]

I had the same issue......there is a tab on the connector up against the dash to push and then push the connector through the hole

[@dcrain11]

@@TarBreehan Yes thank you. I finally figured it out.

[@zachcoogan3104]

Instead of forcing a screwdriver in there, just open the top console, grab it by the front, and give it a quick yank.

[@rossmorrison3510]

It is very difficult to see where the connector release is located. It's a good idea to show the connector after removal so the release can be seen

[@rossmorrison3510]

@Idan Clark On the side of the connector. It is hidden by the ventilation tube and difficult to push to release. On my right hand drive car it is on the right hand side of the connector.

[@norbertocruz2864]

May available ba kayo ng nissan sentra 2005 dash cub vent?

[@masongovender9231]

Great video thanks. Any chance you have the color code or a clear image of the arrangement of wires for the hazzard switch My wires all came loose.

[@WV591]

perfect THX. tu

[@AhmedAAliMubarak]

I want seem like this

[@nedoscarsandfishingvideos5500]

Don’t pull on wires