Does Boost Make 180 Degree Headers Sound Even Better???

[@andrewnelson3733]

I am saddened by the number of negative comments claiming 53 HP increase was a waste of time and money. It really highlights the lack of basic understanding of SCs and the build then adjust approach to Hot Rodding. For folks who aren't famaliar with Superchargers (and aren't puking out your negative opinions) the combo gets more boost with a simple pulley change. More blower speed equals more boost equals more HP. 53 HP was with 4 psi boost. There will be a follow up episode with more power. Have to build it before you can tweak it.

[@ChronoTango]

A supercharger isn’t for peak horsepower, it’s for more horsepower at every point in the rev range.

[@ftovr2957]

The dyno graph would've made a clearer picture in this instance than just the peak number

[@snappyaj9053]

We’re spoiled by impractical builds with insane numbers. This is much closer to reality you can replicate in your own garage. And yeah, as you point out it’s incremental and 50+ HP is a difference you can really feel.

[@BoostedCoupe]

Exactly. But the keyboard warriors aren't trying or innovating anything in their moms basements so it's hard to take them seriously.

[@anthonydurantine2292]

Agreed

[@jeorgelowpez2069]

Love your video editing, simple, not too flashy and doesn’t distract from your content.

[@kaedonthurman7870]

No bs straight to the point we love it

[@Calvin-Nelson]

Thanks!

[@sh3lbot]

The over meme'd, zoom in and out and other edits are lame. Actual content 🤟

[@reecebower9934]

Exactly. My adhd can't keep up with content creators these days😂

[@Channel2exposePredward]

@@Calvin-NelsonI’m not sure if you have already answered this question or not but are there any *POSITIVE* updates on your Studebaker and Truck and Trailer being stolen from the hotel in South Carolina? I’m like others when I say that I feel like someone at the hotel is possibly involved. I’m going to keep sharing this story hoping that someone will find it. Keep on being a *POSITIVE PERSON* Calvin-Nelson it says so much about your character.

[@64Pete]

You do you Calvin, it's why we're here. It's all about having a lark. Pun intended. I'll show myself out now, cheers. ✌🇦🇺

[@SloppyMechanics]

awww yeah

[@Thumper68]

You get slightly longer runner length with taller adapter plate so that could be a bonus as well.

[@mndlessdrwer]

I was trying to figure out the port fuel injection situation, then I realized that this engine must already feature direct injection, so any time the port fuel injectors are running, the air flow down the intake runners must be substantial enough to make up for the poor fuel injection geometry. It was a satisfying "Oh!" moment for me.

[@hbetz5300]

Yeah the gen 5 Chevy small blocks are direct injected factory

[@calvinevans8305]

YEAH!!! It sounds great. I want to see the bigger crank pulley power numbers.

[@Calvin-Nelson]

We'll be running it down the track with that very soon.

[@BlaserBuilds]

"Free for us to use".... "For now" lol. Great video as usual.

[@Calvin-Nelson]

Thanks bud!

[@RANDOMNATION907]

Uhm, _Wow!_ . . . y'all never cease to impress me with your ingenuity.

[@25centsapop]

The amount of work you're willing and able to do to these builds is truly amazing. Anyone being negative about this clearly doesn't do any of this work themselves and can't appreciate the professionalism you build with

[@e34boat88]

best thing ever seeing you upload new vid right after i got back to the house after spending whole evening in garage

[@Calvin-Nelson]

Hope you enjoyed it!

[@mpetersen6]

They haven't found a way to tax the air around us. Dont worry. They're working on it.

[@Moparmaga-1]

Clean air act . Yep they already have

[@fatbubba2097]

Love this build, sounds amazing!

[@James13234]

Peak V8 sound in my opinion.

[@Mattias-Exotek]

Nice! I would love to see some of the efi tuning as well 😊

[@Thumper68]

I have same press comes in handy and i paid $15 from old man who barley used it and made some cool attachments and plates for it as well.

[@mikey_gc8]

Underrated channel, such unique content

[@briscoelcamino7850]

Absolutely love this channel.

[@TurboWorld]

So glad that you mentioned uncle scam hasn't figured out how to tax the air. LOL, it's a great reminder to everyone out there. Great video, love the machine work. That was a lot of time consuming drilling and tapping, Awesome job! I used to have a Pontiac sunbird 4 speed manual I drove in college, was a great little car until a full size van side swiped me and cut the car in half. taillights were touching passenger side door. I really liked that car, and the mechanic i bought it from took meticulous care of it. I want another one now. Thanks for that, and a Yugo, ha ha.

[@xozindustries7451]

Looks great Calvin, this is what I was thinking about when I started looking for the LT 6.6L truck engine

[@alexwhite176]

You would have less to do lol always a good thing

[@Tech-bv9oj]

I love that there's different types of music throughout the video not just the same thing the whole time, good touch

[@RAMATEC-1]

The most important thing is what torque it had aspired to and what it has now.

[@AJv-kb2pc]

Theres a guy on youtube for a couple years with a white z06 c7 180 degree headers and he has a full log of pictures how it was done on the forums. Really unique project he used 2 rectangle brick shaped 4-1 collectors on top of each other for the limited space

[@Calvin-Nelson]

Ok. Nice

[@holeshot1721]

Government is now trying to regulate the price of air just from this video alone! ❤ you can always do the upside down header then add the turbo and do a ramhorn turbo which would give you plenty of degrees in turns for your turbo exhaust

[@davidreed6070]

That is one of the coolest cars there is.

[@jfseaman1]

Wow. Never cease to amaze.

[@legitevan123]

i would love to see a vortec 3500 build PLEASE BUILD A 5 CYLINDER

[@richardfix3937]

Your thermostat housing is now a Fiero style

[@nickcook7408]

Fantastic project, fantastic result, fantastic car and a fantastic channel! If I was to make any suggestions, the only thing I could come up with would be to try and make a new iteration of the 180* exhaust manifold but keep all 8 runners the exact same length. Will sound even better and make even more power. Keep doing what you do, it makes for great KZbin content 👍

[@michaelblacktree]

Neato! Can't wait to see what she does with more boost. 😎

[@greendayrocks559]

Ive learned tons from watching your page thank you posting this stuff

[@christophercraig289]

Nice work Calvin.

[@johnbehneman1546]

A TOTALLY AWSOME BUILD AND A TOTALLY AWSOME VIDEO!!! THANKS FOR SHARING!!!

[@rajcam80]

What a awesome build!

[@thewraith6360]

Sounds really freaking awesome

[@e.v.a.l.s]

so the closest to a supercharged v8 with 180 degree headers i could find was an 8-1 equal length turbo setup. and it sounded bad ass

[@Calvin-Nelson]

I've seen that one. It is really cool.

[@squarefour1]

Outstanding!!!!! I really liked your detailed video. Those that are running these engines will find this very helpful. Great Job.

[@hendo337]

I would suspect that it wouldn't make much difference in peak numbers or anything but, I wonder if the longer runners under the blower and the added plenum volume in that throttle body elbow would make a noticable difference in throttle response and part throttle tq. I can't imagine that it could hurt. I am a little curious how the injector spray pattern would work with the injectors shooting into straight into the runners rather than being angled down the port. I have seen where Kasse had good results angling the injectors up the in the ports on a test. Looks like you did some great work as usual and I am definitely here to see it.

[@Calvin-Nelson]

Yeah. If I had it to do over again, I would have angled them down some. It only seems to have little issues when the air speed is low.

[@HOTRODPOKEMON]

Good luck out there buddy

[@kylecurry6841]

Calvin, I know this is an offshoot request, but I've always wanted to run this sort of combo, however the vehicle in question would be the latest gen Astro/Safari.. was curious if you're able to take a measurement from the crank pulley centerline up to the top of the supercharger casing, just to get an idea on the overall height of the engine given it required spacers for the clearance of the pulleys to make it fit proper.

[@4BillC]

First, I definitely thought that would have been a heavier car! My daily hot rod is 3280 with me and subwoofers in it. For only making less than 5psi that's not a bad gain! I love the work you do. Always looks good all while being home built! I wish my cars looked half as good! But zip ties work, lol. If you have read this far maybe you can answer a question for me. My daily has a small turbo on it that I'm leaning on pretty hard. Making about 25psi and 300whp out of a 1.8 4 cylinder with a 9.5:1 compression, well new. Doing a compression test results in 75psi on all 4. It's tired and I have a built engine just no time to install it. Anyway... Exhaust back pressure, is it possible to use an analog boost gauge to measure it? I really don't want to spend a couple hundred dollars on something I've went this long without but I feel like it's something I should look at.

[@erickliban2]

4PSI Sounds more like he has a boost leak

[@Low760]

Do it.

[@MXstar189]

the air we breath is free "for now".

[@baddbradd89]

I love this car as is, it's almost perfect.(a few more HP!)

[@Calvin-Nelson]

One pulley change away.

[@gt1man931]

I knew the no boost life was not going to last. I really like this car, I am just not in to whatever is the cookie cutter favorite of the month(mustangs/fox body etc...)

[@Calvin-Nelson]

Yeah. I've been spoiled. Lol

[@Richard-n2w1g]

I'm not sure if I saw it right. But I might be raining on your parade by pointing out the location of where you put your coolant temp sensor. It's in the part below the thermostat so it reads the engine side temp before reading the radiator side. So you may or may not run into some closed loop fueling issues or inaccuracies in coolant temp before the thermostat opens because of it being above it rather than below it. Otherwise, it seems like a pretty sweet unit 👍

[@Calvin-Nelson]

I moved it from the factory location which is below the thermostat to above the thermostat. I haven't noticed any issues at all either way.

[@Richard-n2w1g]

@@Calvin-Nelson Fair enough. I just didn't know if by changing the location it would cause any issues. You may not know until you get some miles on it. I was just more or less letting you know it could cause some issues with fueling. But it would only be during the time of first start up until the thermostat opens. The temp sensor is below the thermostat to see the engine temp, not the radiator temp. But as long as it works, then there isn't much of an issue 😅 I was just making an observation 👍

[@ericbengtson3490]

Awsome barns.😊

[@garylamb4777]

If you're looking for another Studebaker there's one on marketplace in SW Florida. Almost the same colors too

[@ryandoyle4344]

Rev three times; There's No Place like Home, There's No Place like Home. Best wishes for a happy reunion

[@daveunbranded]

For a second i thought you were putting this on the inline engine

[@chadrichardson411]

This guys channel will blow up

[@Low760]

It hasn't yet despite the awesome work.

[@CapablePimento]

So the supercharger and 180 headers isnt a common thing on the interweb? That explains why Im only now hearing the true song of my people.

[@JoshsCarCorner]

My first thought was, if you had started with a Gen 5 6.2L, you would have already been at 405WHP power. But I suppose you haven't turned the screws up yet, there should be more in there. I just hope you won't have to take the engine apart to do ring gaps.

[@Calvin-Nelson]

I already opened up the ring gaps.

[@AJv-kb2pc]

Do you know that lt4 uses titanium valves I didn't know this, I wonder why they don't rev too high I think the supercharger chokes it at high rpm or the exhaust is too restricted or the factory springs/lifters suck

[@UewsSMF]

Wish i had the gas money id show up and say hello.. Have great runs!~

[@dannork1240]

I see a hot rod Lark and I automatically hit 👍🏼 Then I watch the video and like it even more👍🏼👍🏼

[@bullast2046]

I’d be interested in turbos connected to this, “180 degree” header.. wonder if it could help things like MAP, exhaust scavenging, etc etc.. ???

[@Calvin-Nelson]

Me too, perhaps we will do that someday.

[@davidhowell6908]

Love the headers

[@thomasmaymnard]

I'll see if I can find it, but years back someone stuffed a 1uz in a celica I believe, put an eaton on it and built 180 degree headers. I believe the drive did a feature. If I can find it, I'll post the link

[@thomasmaymnard]

www.youtube.com/@markstoys11/videos

[@thomasmaymnard]

I couldn't find the review/feature video... but I did find the guys channel itself.

[@krisdorty5814]

@@thomasmaymnardwhat is it?

[@andymcdo]

It'd be interesting to see if the ZL1 blower cover makes more power or changes IATs

[@Calvin-Nelson]

I bet it would!

[@gerardotorres9963]

Excellent video

[@Burndown]

This is such a rad little car! Nice work. I would love to see it in person one day.

[@Dante_S550_Turbo]

"It just needs to be customized a bit." That's where most builds go to die, but you keep chugging along

[@GMCJay_lly]

Commenting for support. Keep the killer content comin'!!

[@Calvin-Nelson]

Thanks bud!

[@Thumper68]

I hope you vacuumed all the tap shavings couldn’t tell.

[@kennymcquinkiss8292]

Great video. Looking forward to more

[@brucenaylor2043]

I love going fast you change one thing you change everything...😅😅😅

[@xozindustries7451]

Can you stack the Harrop injector adaptor on top of the ICT Billet supercharger adaptors?

[@Calvin-Nelson]

Probably.

[@Fackler91]

That sounds awesome

[@ethannn_9965]

What video were you watching on the mill when you were doing the injector holes?

[@Calvin-Nelson]

Cleetus McFarland

[@larsjrgensen5975]

Would love to see the follow up with something like twice the boost for 550hp er so.

[@hough495]

I used a early 90s Honda Civic radiator for the heat exchanger on my LSA swap. The aftermarket aluminum ones may be small enough to work for your setup.

[@Calvin-Nelson]

Yeah. I have plenty of room. Just ran out of time.

[@Mastermindyoung14]

This thing is badass

[@samthing4thetrack806]

The FI is what it is, but seems to be inefficient unless they really atomize extremely well. it would have been nearly impossible to do them at an angle it seems. neat project anyway, the work done is fantastic. more than I would want to tinker into even if I had your facilities! That car weights little too! Just need to put some bigger drag wheels on the back and some rake! :D

[@dannork1240]

Now I wanna hear an R3 Lark with 180 degree headers.

[@joeyjojojr.shabadoo915]

My vote for next upgrade would be 4.125" block sleeves with either LT1/LT4 OEM Cylinder heads (or a pair of L8T Heads as they are essentially LT1/L86 heads that come with Inconel Exhaust valves as oem equipment). Time for a heavy breathing big valve 388cid.

[@Calvin-Nelson]

Unfortunately, that probably will never happen. The car was stolen from me along with my truck and trailer.

[@TimTam770]

Holy sheet. Awesome. More people need to do 180 headers!

[@paulanderson9650]

Grm 2kx$ is how i found out bout you legends! Bout 20 years ago I started going to circle track swap meets with my pizza delivery money to go fast cause of you guys! One day ill make it down to FL for the grm2k

[@ArthurSperotto]

Dude... that TKX is going to leave the chat... mark my words lol.

[@Calvin-Nelson]

I hope you are wrong. I've heard a lot of folks having good luck with them.

[@ArthurSperotto]

@@Calvin-Nelson I hope I'm wrong too!

[@TomBudin]

love the content man. the quality is excellent every single time man

[@Calvin-Nelson]

Thanks!

[@ericwilson2585]

Oh oh oh, the beauty of a milling machine... Hahaha.😅

[@HeadFlowInc]

On the average a clutch, manual transmission, through a driveshaft and rear differential has an average driveline loss of approximately 15% or an 85% net. I bet your crankshaft horsepower is very close to 476.

[@Calvin-Nelson]

Yeah. I was figuring around 10% because of the rear being an 8.8 and it being a modern transmission. Hard to say without actually measuring it though.

[@johnbehneman1546]

THANK YOU SO MUCH. I LOVE EVRYTHING!!!

[@kumakaroshi117]

Is it just me or did it look like he was standing in the engine bay at one point.

[@woopyass]

I can't wait until you get that blower speed up, and i'm interested to see the torque curve from 2800 - 6500 with those monster heads. I was wondering about the injector placement though, Is it because of the pressurized air in the intake that you're able to point them almost directly at the outside of the intake adapter wall? I've always thought injector height and angle were critical to timing because of heat and atomization properties. Is there a way to run them on the outside of the adapter at a steeper angle? Anyways, you're killin it, thanks for your awesome videos, and I'm hopeful that you'll have more Northstar content soon.

[@homerepairguy1]

I hope a pully swap fits for you

[@Calvin-Nelson]

It does and it's done. Lol

[@Scrildo1]

Do you foresee any fueling issues the way that the injector nozzles are pointing?

[@Skwisgar2322]

Plus, everyone know with blowers, more taller is more better.

[@angelobauza3964]

I am sure that you will get her really screaming sooner than later, my nephew rebuilt a 2019 Vette and by changing the cam and a little port work and pully changes she made 1100 hp of course the Vette has a few more cubes

[@iliketorockrock]

that sound NASTY 😍

[@hammbone1612]

Good content man. Keep it up.

[@Superb_Owl80]

erik satie gymnopedie 1, such a good music choice. I’ve loved this song forever.

[@johnnygeorgopoulos4072]

Always.... I occasionally date some ladies half my age and some of Erik's stuff will play as I have it in my play list of super eclectic music (funk, jazz, metal, R&B, classical, soul, rap, electric ECT) and they're always like "WTF is wrong with you?"... I'm like.... you really need to expand your musical horizons 😅

[@AlmondNut]

Damn, finding a new channel with a new upload?? Is it Christmas or something?? 🤔😂🤝

[@Calvin-Nelson]

Better late than never!

[@AlmondNut]

@@Calvin-Nelson I got the bell turned on so I sure as hell won't be late again 🤣🤝

[@AJv-kb2pc]

Is it water intercooled? Did you try adding some ice or making a cold ram air intake for lower iat

[@Smokey72013]

O love all your builds. The headache of the belts I don't think I could ever use a blower or supercharger unless crank driven. I don't know if you could use a different maybe Maggie blower in that one's place without too much issue. Plus you don't seem afraid to modify much

[@Low760]

They are a GM factory unit so it's engineered well

[@Calvin-Nelson]

Yeah. I don't plan to spin the blower too hard. Only have belt slip issues if you take things to their limit from what I see.

[@newtonfirefly3584]

@@Calvin-Nelson this engine, power train set up can certainly achieve much higher Power/Torque with a far superior supercharger with higher capacity, boost as from Magneson or Procharger [with excellent proper engineering, design, development, experience, durability, performance] along with changing the fuel type to ethanol, perhaps methanol, also for drag & drive with a flex-fuel sensor; Have seen many of these Gen 4 & 5 LS/LT engine, power trains easily achieve 900-1200wHP. RPM Performance is a good reference, basis to view with using these details along with their achievements with mostly essential street cars {Fran (owner has his Corvette race car too; 2nd place World Cup Final 2023) Just a change to the fuel with proper E85 will increase the wHP by 100HP+ more with higher content ethanol up to as E98 and similar; all without any significant weight increase in the engine compartment; certainly more useful, helpful, beneficial addition with "flex-fuel" sensor and improved intake manifold from the previous. also methanol injection, water injection or water-methanol injection are excellent, reliable, useful, helpful, beneficial additions; all prior to any forced induction boost and useful with them too. There are other improvements within the cylinder heads, internal components, rings, cylinder wall honing surface, sleeves, certainly lubrication with highest quality, durability, performing synthetics within the engine, transmission, gears, wheel, bearings. Seems that You and Your dad could use some good, proper, useful, helpful, beneficial upgrades within Your knowledge, experience base along with practical application, implementation which are well known, established for over 40-80 years too. Perhaps You can benefit, comprehend use, much of the information, knowledge from an expert as David Vizard, even Jefferey Lutz, Jerry Larson, Justin Shearer [Big Chief - Midwest Street Cars], Dennis and Alex Taylor, Steve Morris, Kevin Smith, along with some others too Certainly appreciate many of Your unique approaches, platforms, engine uses, etc. All The Best, Sincerly

[@JakStoll]

super cool man 🙂

[@blackericdenice]

I want put my air in my mama name. Can anyone tell me who said this without google?

[@williamrouse3033]

You could always run turbos into the blower. How would that work?

[@TheBossKelso]

sweet car

[@a4000t]

Oh man! now u said it,tax the air! Don't given them more ideas please 😶

[@joshuaolson5265]

If you take a look at this Hayabusa engine video you'll notice what the engineers did to improve the Hayabusa engine. I see that you are adding side port injection, but the engineers changed that to angled side port injection instead of at a 90 degree angle. They also installed a flap in the middle to port to guide the air. kzbin.info/www/bejne/qoSTqHiQotSij7csi=Z8IC6wEKpbuZY0A_

[@crazyfoot490]

I'm 13 seconds in the video and yes it will Sound amazing