Noctua Industrial iPPC 3000 RPM F12 & A14 Rugged Fans Review

[@TechLegend-com]

That beach background, I'm taking it! Now let me find a beach in between these mountains.

[@Glob3Tech]

😆😆

[@sinistan1002]

I have one of these though yet to use it, I hooked it up temporarily when I first got and got my finger in there, fortunately was not up to full rpm and it ripped off part of my nail, definitely need to use with caution

[@Glob3Tech]

Yeah they are powerfull thus require caution. Glad you are ok.

[@by010]

Good review, I wish you more viewers and success. Space to improve: measure noise levels (but I understand tool may be an expense you dont want or cant take rn)

[@Glob3Tech]

Thank you! Will do 👍

[@by010]

@@Glob3Tech awesome

[@elenaluca842]

superb incadrarea in asa peisaj si rugina incadrada in culoarea lor superb imi place ca esti corect si prezinti si avantaje si dezavantaje( nu imi vine sa cred ca ma uit la date tehnice si ca faci o prezentare atat de buna si fara timp de respiro cu imagini superb si date tehnice) vezi ca imi schimb meseria in viitorul apropiat🤣 macar ma specializez asa ca ms pt cursul gratuit si daca mai am si o scoala cu asa imagini tot sa invat felicitari Alex super reusita prezentare!!!si eu zic sa cauti deja colaborari pt reclama sa iti intre ai niste venituri substantiale pt ca e multa munca si o faci stralucit

[@Glob3Tech]

Ma bucur mult ca ti-a placut constrastul si asortarea 😁 Imi place sa experimentez. Saru'mana mult Dani!! 🥰🥰 Da pai aceala va fi pasul urmatorul care e proportional cu nr de ochi care ma urmaresc. Ce pot sa zic totu la timpul lor cat de curand. 🤗 Vrei sa te apuci de KZbin ma anunti si te ajut, nu conteaza subiectul 💪

[@elenaluca842]

😂 de youtube nu de calculatoare mai repede ca faci prezentarile frumoase si cu tot ce trebuie...cred ca daca si prezinti cum se introduc si cu ce scule cam cum faceai la masini...o sa ai mai multi privitori...asa ai doar pe cunoscatori..care si asria sunt destui..hai fa.ti reclama ca se merita chiqr faci treaba buna..vb scurt l obiect..nu lungesti inutile discutia doar sa te auzi vb esti cum se poarta acum scurt cincis si la subiect..asa ca hai cu reclama

[@Glob3Tech]

@@elenaluca842 Da depinde de produs, ai vaz la racire de cpu, coolerele acelea, arat tot pas cu pas. Scule, daca dai mai in trecut am vazut 2 cu borseta mea de atac 😁 Oricum nu ma opresc ca stii tu pasiune.

[@elenaluca842]

nici nu trebuie sa te opresru ba din contra cand ai timp cat mai diversificat si da chiar se vede pasiunea s8 munca in calitatea realizarii

[@KiSs0fd3aTh]

You put the 140 one's on a u12s? Wow, never thought of doing that. Going by the specs, these seem better than the new phanteks t30-120, but are they? Im considering to equip a pair on my u12s, but not sure which ones. Your 140 experiment got me thinking

[@Glob3Tech]

Yeah, I noticed that the loss of escaping airflow is negligible around the heatsink. Zipties to the rescue. I don't have the phanteks ones to test them out though.

[@KiSs0fd3aTh]

@@Glob3Tech Oh, so you ziptied them. Any problem with ram clearance? Cause that's my only concern with the t30's since they are thicc.

[@Glob3Tech]

I put the zip ties through the fans' screw holes and another set (just the lock caps) when exiting the heatsink for a cleaner non interfering way. I think you can see the same trick in my Silverstone fan review on top of the be quiet TF2. Good question, if you can get an offset asymetrical heatsink maybe you can accomodate the thicket fans. Or LP ram.

[@KiSs0fd3aTh]

@@Glob3Tech Tyvm, I was just watching your TF2 review ;)

[@Glob3Tech]

You are most welcome. Any more questions, fire away 👍

[@AshenTechDotCom]

i have a cryorig a80 (280mm aio with a fet fan on the pump), the stock fans are... MEH at best, i swapped them for a set of Akasa Vipers i have had for a long time now, that was better, i then added a couple noctua iPPC fans(3k rpm), that made the thing work far better, later i added 2 more, i have an old coolermaster cosmos medusa(cm1000 with custom paint job), i have a hand cut filter over the intake for the rad, also got a 120mm in the bottom working as an intake with a filter installed that keeps out the vast majority of the dust, and thanks to the high static pressure, the flow is still very good... :) an x5675 clocked from 3ghz stock to 4.45-4.7x ghz (turbo), is not having any issues keeping over 20c below tjmax...

[@Glob3Tech]

Thanks for the comment and glad to hear! 👍

[@AshenTechDotCom]

@@Glob3Tech honestly, i would like to see somebody do some testing to show the delta between a couple PPC fans vs stock on AIO's, i got a feeling Noctua could brand their own AIO, even offering dif fan options, a thicc 280mm with a couple PPC on it, would be quite attractive to alot of us, even with a markup for the better fans..since..we swap the stock ones anyway.

[@Glob3Tech]

I know what you mean, hence why Asus uses these fans for their AIOs. I suspect if Noctua starts to do AiOs they will be so expensive given their native quality and expectations. But who knows.

[@brunomalezan9946]

Does the NF-A14 3000 PWM have Static Pressure: 10.52 mm?

[@Glob3Tech]

Yes it does. 3000 rpm for 140mm. Insane 😁

[@riffe5366]

I hope you can make video about GPU test

[@Glob3Tech]

The newer ones, me too.

[@Serandi1987]

Are they better for static pressure or to cool directly components??

[@Glob3Tech]

At these power levels, I would say both. The specs are insane for both static and airflow numbers. But it depends on what noise levels you set them.

[@Serandi1987]

@@Glob3Tech OK!! 😍 Thank you so much! 💯

[@Glob3Tech]

My pleasure 🤗