Not Every Machine Restoration Has A Happy Ending

I enjoy restoring old woodworking/workshop machines but there is a degree of risk involved. Unless you have X-ray eyes it's impossible to know the condition of the internals. Sometimes you spend time and money just to find out a machine is not worth restoring.
Check out my other restorations:
Wadkin Bursgreen AGS10
• Table Saw Restoration ...
Delta Jointer
• Good As New! - Vintage...
Fobco Star Drill
• Better Than New! 60 Ye...
To support my channel visit one of our merch stores:
USA - teespring.com/stores/woodshop...
EU - teespring.com/stores/woodshop...
Or follow my projects on social media:
Facebook: / woodworkjunkiesite
Instagram: / woodworkjunkie
Check Out My Gear (Affiliate):
USA - www.amazon.com/shop/woodshopj...
UK - www.amazon.co.uk/shop/woodsho...
Some product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support.
Disclaimer.
All of the videos on this channel are intended for entertainment purposes only.
Should you choose to make or do anything as depicted on this channel you would do so at your own risk.
Woodworking and the use of power tools can be extremely dangerous.
The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct.
Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer.
Always use protective gear where applicable and never attempt something you are not comfortable doing.
Your shop safety is YOUR responsibility, so, therefore, I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do.
Please, stay safe and work smart.

[@frednoble3547]

Brai for sure! Also, thats the least expensive part of a compressor - get a new tank and the motor and pump might still be worth restoring!

[@nastyevilbunny]

I'm glad you still posted this video. Some youtubers don't post their mistakes, but i think mistakes and failures are an important step in he process, because everyone experiences set backs and how to deal with them is a vital skill that everyone needs.

[@sheltonsmith9270]

cut it in half and make a charcoal grill

[@Hark3n]

Word of advice, don't mess around with pressure vessels. The explosive power of compressed gas is scary. If you do find a receiver that might work have it checked out by an approved AIA. You're in Cape Town, so contact Executive Safety Services and have them check out the vessel before using it.

[@hyundaiverna]

For the damaged one: BBQ grill. Regarding the compressor, maybe you can source a big propane tank (make sure to fill it up with water to the absolute top then rinse etc to force any gas to escape before making anything else to prevent explosions) or some other used compressor tank (hopefully a big one) then adapt the compressor to it and you will have a huge improvement for stored air volume

[@SteveMonk1956]

That's a real shame, but at least you found out before you pressurised it up to 8 bar.

[@billforrest4205]

A 47Kg propane cylinder/tank is a viable alternative if you have a good motor and pump and still want to build a working compressor. It will also increase the volume of stored air available. The propane cylinders are also rated for much higher pressure and as they aren't subjected to moisture it's very unusual to find one that has suffered internal corrosion. That said you would still need to modify/weld it to accommodate the inlets and drain plug. I have never replaced a compressor tank with a propane cylinder, however I have mounted one on wheels and adapted it as a secondary air reservoir (They hold 92 Litres approx) to supplement my 150 Litre compressor. At this point it has held 150 PSI happily for 10 years and counting! I added a drain plug, Inlet and twin regulator/pressure gauge outlets, so pretty much the same job minus the actual pump and motor. 😉

[@MCsCreations]

Well, you did what you could, Jean. But since the motor and pump seems to be good, who knows? Perhaps you find a better tank later on. 😊 Or use the motor to build something, like a disc sander. It could work very well! Stay safe there with your family! 🖖😊

[@carlbillingham2670]

What a shame but still enjoy watching your restoration videos even when they don’t quite workout. Keep up the good work! 🇦🇺

[@DK-jg5vk]

The Achilles heel on any older compressor is the tank. The electric motor or the air compressor motor can be revived if parts are available, but an aged weakened tank has a lifespan that if exceeded can become a bomb waiting to explode knocking a wall of your shop off it's foundation. Be cautious with older compressor tanks and always pressure test them with water before proceeding with a restoration.

[@diogoshimizu]

My suggestions: - Rocket stove - BBQ - Toolbox (like those made of steel drum barrels) Design inspirations: - Space Age aesthetic - Airstream travel trailers

[@heterogeneityrocks1]

Thanks for sharing, bud. Cheers see ya on next one

[@ifiwooddesigns]

Thanks for confirming that not all rebuilds are successful. As for uses, I’m sure most will say to convert to a grill. I’d rather see something unique like a fire proof trash to place rags and other flammable material. But what I’d really like is either a smoker for meats, a wood stove for pizza, or maybe a fire can to burn scraps and other material. Something different than a grill. Keep up the great work!

[@c.a.g.1977]

Make a small wood stove out of the tank! Shame your track record isn't a 100% score anymore, Jean!

[@torsi10]

restore motor, new tank? Thanks for showing unsuccessful things as well, great character!

[@davidtrump7598]

Good thing you checked... I have a lot of old compressors and should check them as well. Thanks for the video.

[@michaelwhitehurst]

I say fire pit or a planter. I imagine the upper half of the tank is in better shape than the lower half.

[@markallinson4935]

definitely find another tank that you can use to take your pump/motor. As to the old one... if it is that rusted through, then only the top half really stands any chance of being useful, so fire box or planter!! ;-)

[@EvanDunville]

You can get a new tank to go with the pump and motor. Definitely better to find out when cleaning that to use it and have the tank pop

[@joneym4103]

I would use the tank stand up to make a bbq smoker out of it, Weber Smokey mountain style. Or perhaps a rocket stove thingy. If not, then on its side and make it a grill with a lid. The motor and pump can be reused as well for a disc and or belt sander, drill, lathe or as a compressor with a new tank. With your present experience I would be careful with getting a second hand tank 😂. Keep on your good work, man!!

[@patchesofgreen3832]

I'm in agreement for the barbeque or some other type of stove or oven.

[@raymitchell9736]

Well, I'd let the guy know that you appreciate his donation... Say "TANKS A LOT" and turn it into something like a planter, fire pit, shop stool, or anything BUT a pressure tank LOL.. 🤣

[@TheLukemcdaniel]

The tank is a bust, but you could still renew the compressor, and get a fresh tank to use with it.

[@user-ko2ut5ed4d]

喜欢你的每个视频❤❤❤

[@daveedwards6567]

Make a BBQ with the old tank get hold of an old log gas bottle and drill and tap for all the compressor fittings and thanks for your video s good job

[@GIKAO77]

Charcoal grill, you can make it as a small sink for when you have to wash some utensils...

[@szaibot]

There are some tools/parts that should not be restored - and tank from compressor is one of this. U will never know what is inside and then pumping a lot of pressure inside is a bad idea. It can explode. It's not worth the risk :)

[@user-kr3ek7rx9m]

잘보고 갑니다.

[@gardenrailroadingjointhefu3379]

Yes, I love the idea of a BBQ pit. Split the cylinder in half lengthwise and hinged. It would look so cool.

[@BruceBoschek]

I was fired on the spot for welding a handle on a compressor tank. Pressure vessels will kill you. This is no joke.

[@kellcomnet]

Can't win them all but I would be curious to see the motor restoration if you decide to move forward with that part. As for what to do with the tank, I figure the tank is compromised too far to use as a fireplace or grill but who knows.

[@ianvicedomini2648]

I guess being a freebie you have to expect the consequences unfortunately but yeah repurposing it into a coal oven for the garden sounds great 👍🏽 👌

[@gene8829]

Jean, it is illegal to modify a pressure vessel because of the dangers involved. Rather use it for a braai or flower pot. We don't want you injured in the process.

[@fdort3971]

@woodshopjunkies don't consider it a fail...it's a learning process. You could get really creative and turn it into a fishtank that looks like a submarine! That would be unique, repurposing instead of landfill fodder and it would be a funny conversation starter!

[@theidlehandsworkshop3884]

Repurpose that cylinder as a forge, heater, Street Sign/Advert, lots of uses for that as long as you don't put any pressure like you said.

[@josemiguellopes]

Braai the beast!

[@yvesfortin1620]

convert it into a forge

[@ralphfell2119]

Well spotted. Just a suggestion , use a propane gas bottle as a resevoir they are easily found for not much money.

[@briannelson4122]

at least you got a motor and compressor pump out of the deal

[@chrisdupont1195]

Turn the old tank into a braai!

[@shellyjones3046]

When are you going to start on the all in one work bench?

[@dougggiereid]

I am also wondering and waiting in great anticipation. . .

[@ryanseymour3928]

Braai boet! Bou 'n braai!

[@KarelRode]

En daar dag ek jy is 'n paar dae laat met April! Swings and roundabouts ou maat.

[@diegohperez6434]

Well my friend make a stainless tank

[@henrysara7716]

If compressor engine work fine and the safety valv, buy a new/used tank.

[@kelvingstrachan]

Definitely a braai oven dingus

[@juanfranciscocuadradoferna6780]

Hola, que tal un horno de carbón ?

[@PotgieterWoodturning]

Maak n braai broer 😁

[@hillonwheels8838]

Try to find a similar size compressor with a bad pump or motor that you could use your pump and motor on. Worst case scenario you may need to drill some new mounting holes but you would then have a functioning compressor.

[@theDaftman]

roof storage their at 1:45, roof storage gone at 1:47, back at 2:04, gone again at 2:20 lol

[@mikebonom]

Cut off the brackets and weld to a new tank. Then rebuild.

[@Normal1855]

Save the other parts.

[@ezukerma]

I would make a trash can with a foot lever to open the cap...

[@glyndevonport7802]

If nothing else you have aquired a motor that can be used for another project

[@AndyCallaway]

Cut it in half and make planters.

[@JasonHampel]

Rocket Stove!

[@JJmx2vj]

Cut the end caps off and make friends with a plumber that could chuck a piece of off cut pipe of the same diameter your way

[@cfdtv1]

Lamp

[@norbertr823]

Buddy search what happens when these tanks explode - you’ll never want to restore an old compressor again. I think you dodged a bullet there ou maat !

[@TheFalconJetDriver]

A neighbor rebuilt his compressor with new rings bored the cylinder and put back together. Fired up the compressor and the tank ruptured it sounded like a cannon going off. Listen to the others a compromised pressure vessel is dangerous.🤯🛫

[@davorinrusevljan6440]

Much more interesting is what you are going to do with a pump

[@friendlygarfield]

ok brother all say turn it into a braai - guess you already have one :-) If you like ? let me know as I am in northern suburbs of Cape Town and I have a similar 50 liter compressor (that works ) for you ?

[@user-yn3hu9to1r]

Как это будет по английскому, shcaise video

[@kenkaseman8129]

Umbrella holder

[@robertlong9029]

They make a tank liner that you could put in there. You could probably even get some spray in bedliner in line the inside of the tank it would fix it.

[@johncarter9067]

Lucky before you spent any money on it

[@projectrebuild908]

Because its so rusty ii don't think it will be worth turing in to a grill. But letting it see out the rest of its days as a planter will probably be a good last life

[@jabrwok]

Maybe cut it into strips, flatten, and then make the strips into knives? The alloy might not be worth the bother though, especially given that it's prone to rust.

[@antonkriel4074]

How about a beer/drinks cooler

[@gregm312]

make it into a b-b-q

[@glennmoreland6457]

What you did there was NOT a "waste of time" There's plenty of videos out there just showing "restorations" of air compressors... Or in other words a paint job... ☹🇬🇧

[@brucemitchell5637]

Turn it into a smoker.