The Timber Wolf may have some major competition after today! I feel Husqvarna & Jonsered was making some pretty good 50 - 70 cc chainsaws from that time period, but it's nice to see what they can really do with a little tweaking. Good stuff! Thanks for sharing!
@terricoon9029 Жыл бұрын
Run the makita/dollar 6100 it's nice also
@driftlesshunter9200 Жыл бұрын
@@terricoon9029 Jonsered & Dolmar (first gas-powered chainsaw company) were my favorites, & sadly both brands have disappeared from today's market!
@terricoon9029 Жыл бұрын
Just got me a 6100p it's a ripper even with the factory chain nice torque not to heavy
@driftlesshunter9200 Жыл бұрын
@@terricoon9029 I really like the Dolmar chainsaws. If I needed one, I would surely consider one while they still exist. It's my understanding, Makita stopped production last year, which is sad. I have two Jonsered chainsaws (52 & 65 cc) that are18 &19 years old, & I wouldn't trade them for anything.
@terricoon9029 Жыл бұрын
@@driftlesshunter9200I didn't know they stopped making them ugh I had a need 670 run for years super nice I 5hought loaned it out and it got busted up big time I sent what was left to novice for parts can't wait to see a 670 vs 562
@SCouch-cw6je Жыл бұрын
I’ve owned and ran everything from 266-572 and everything in between. I’ve always held onto my 346,359 and 372. My 3 favorite saws I’ve ever ran. 359 really wake up with some work
@oldcodger1929 Жыл бұрын
That does it. I'm tearing into my 2159 Jred now. That's impressive. Nice job.
@jcsawshop Жыл бұрын
Matt knows his stuff for sure. I went up and picked up a cylinder he did and put it on my 2159. It's a beast. Need to advance the timing now though after watching this.
@Houseworksaws Жыл бұрын
Yes Sir you do.. Really helps em clean up
@ericnicol2616 Жыл бұрын
Very nice running saw Boedy!! Matt is an excellent saw builder and gives great advice. I’m slowly working on gathering parts for my second 359/7 build. I’m still missing an oem carburetor.
@daphlavor Жыл бұрын
Wow, Brod! Serious power and revs. My 353 needs this treatment. Especially for falling big trees.
@aaronpowell4885 Жыл бұрын
Wow, holy smokes is right! Zings right up there and has plenty of torque👍🏻 I definitely see why the interest in them now!
@eze.Morning_Wood_Farms6 ай бұрын
This whole video was a blast to watch! Love the saw.
@VintageSaws Жыл бұрын
There quick first time i ran my dads 357xp i was amazed at the power for the engine size and the rpms it hits.
@davesteier-xf5lh5 ай бұрын
There’s just something magical about a 359. They have to have a great case volume to piston and jug capacity ratio. I worked with a guy had a few Stihls and he had 1 Husky in the box. I remember him saying he didn’t like it because “it cuts too fast”. Nearly the whole time I worked with him I just picked over the Husky (it’s got a full wrap on it too damnit!!) well one day I grab “the Husky” I put that thing to the pine and it fed so fast… none of his or mine at the times Stihl.. that thing would out cut speed-wise every saw we had. It was that fast. I wish I could get it lol just an awesome saw. It just sits in his box.
@dubbssawshop Жыл бұрын
Heck yea buddy!!!! I was totally blown away at the 346xp, in my head in thinking it could possibly be one of the best chassis. 👍🏻
@Doc-Cole_Trickle-of-Chainsaws Жыл бұрын
Woody is pretty sweet👍🆙D
@IowaPerformanceSaws Жыл бұрын
I think that's the happiest I've seen you running a saw in a long time. That House character is someone I am always interested in what he's up to- great guy and very good work. That's a screamer. I have a 357 here, and a 359 cylinder... looks like I should get busy.
@Houseworksaws Жыл бұрын
Thanks bro.. You’re putting out some mighty fine work yo-self
@jwoods345 Жыл бұрын
Very nice boedy! The 52cc version 350 has a very similar designed cylinder and alot of people want the 346 instead. Not me. I've had great porting results with that 52cc 350 cylinder.
@Houseworksaws Жыл бұрын
I’ve also had excellent results porting the 45mm 350 top end. They can make excellent power
@Houseworksaws Жыл бұрын
That’s awesome man I’m stoked to hear and see it came together for you man.
@Doc-Cole_Trickle-of-Chainsaws Жыл бұрын
👍🆙MD
@IowaPerformanceSaws Жыл бұрын
House in da House!!!!!!
@Houseworksaws Жыл бұрын
@@IowaPerformanceSaws Yessa!
@Sokrates6610 ай бұрын
I have the 359G (heated grip) for 20 years pure stock, runs good and for me plenty of power.
@oakiewoodsman Жыл бұрын
You ain't kidding! Runs well!
@larrywarner93147 ай бұрын
357 , 359 , 2156 ,2159 are my go to saws I live in Pennsylvania and our trees are a mixture of hard wood and my saws eat it up 😁
@billylee2312 Жыл бұрын
Ya. You did a good job on that saw. It sounds and runs good. That’s one of those saws you never sale.
@vincentnail2881 Жыл бұрын
Nice work Boedy. Dry oak like that is a good test for any saw. Went right thru it.
@jimholz1102 Жыл бұрын
Outstanding result! Goes on the keeper shelf.
@RMosher11 Жыл бұрын
Man after watching this I can't wait to finish my 359! What an angry little bastard that is!
@jarrodskeete52 Жыл бұрын
Impressive man! Really rips... Love that roostertail...... Moving some wood dude.....
@larrywarner93147 ай бұрын
In my opinion the 346 XP ,350 , 357 , 359 are worth there weight in gold, your newer 550 s are good saws but my 346 and 357 out work them hands down
@BryanClark-gk6ie4 ай бұрын
Year 2000 Husqvarna 55 rancher' is he a good one?
@brandonsmith3447 Жыл бұрын
That’s nuts. I’m always on the lookout for a nice saw to send to get the BPS treatment maybe that’s what I should be looking for.
@ragercrepair9301 Жыл бұрын
I think I need to find one of those! That's for sure impressive for the size of it.
@sawnut Жыл бұрын
Nice saw, I know I will never part with my ported Jonsered 2159W.
@anitahelton4698 Жыл бұрын
We have something in common I say ouch allot when I handle firewood
@sunbear1973 Жыл бұрын
Hell yeah you have ported one nice saw right there. Nice work 💪
@coreycorp7048 Жыл бұрын
I always say, its hard to beat a ported 359.
@joec9680 Жыл бұрын
That saw might not be able handle the power nitrous would make. Impressive 👍
@happy8637 Жыл бұрын
That thing is wild! Good job!
@kingsaws6 ай бұрын
Damn! What a runner
@jonbobskunkworks Жыл бұрын
Giggity giggity! Well done!
@Doc-Cole_Trickle-of-Chainsaws Жыл бұрын
Wuz🆙JB
@jonbobskunkworks Жыл бұрын
Currently trying to balance life’s curveballs!
@user-zj2oi9xw9o9 ай бұрын
please let this saw get a little more low end throttle control and let it eat some oil on the midrange. use that finger and diddle it a bit, saw sounds beautiful but you let it run away too long too free! load that gullet and keep the horse working man. i built a 359 myself for fun. it dont hum like that hahaha, put the redline amsoil to it! rootbeer scent! ahaha
@MrJeepfreak1972 Жыл бұрын
Now you are getting my attention....good job.
@shawnglacken3055 Жыл бұрын
That saw got some UMPH !😲
@Doc-Cole_Trickle-of-Chainsaws Жыл бұрын
👍🆙SG on the 525 win
@playingwivwood Жыл бұрын
That saws a lil beast
@darrenwilson7688 Жыл бұрын
Turdsaw runs great dude.
@naturundhund Жыл бұрын
Ich habe auch eine 359 er..... Greetings from Germany
@frankz1125 Жыл бұрын
Sounds great. Cheers
@rejeanparent4095 Жыл бұрын
Verry verry nice Quebec Canada
@tedneitzel Жыл бұрын
Its a beast!
@wickiuprat Жыл бұрын
I want to buy a Woodsman Wack off tee shirt! 👍🏻
@johndoe-ko8nu5 ай бұрын
i know this is 9 months but im build a 357xp bottom end and porting a 359 cylinder i am very curious what will happen with crank suffers?
@JandSChainsaw Жыл бұрын
👍👍nice job
@pavchainsaws3405 Жыл бұрын
Great saw👌
@robpeck5854 Жыл бұрын
Advance the timing on the 55 like you did that one and see if it makes a difference
@Gurris133 Жыл бұрын
good work
@OldcampRanch Жыл бұрын
What a screamer 👍🏻
@crazyfeller5704 Жыл бұрын
So just to be clear….you like this one, right?
@danagordon8871 Жыл бұрын
😂
@darrellpeak2914 Жыл бұрын
Run it against the 400c!!
@coxsaws Жыл бұрын
Yeah buddy, check out my g660 pro run with 6 degree advanced timing with PPP port polish and pipe
@darrelljohnson4658 Жыл бұрын
Funtime sawrus cutting wood 🪵
@coolestguyontheplanet723 Жыл бұрын
Do you think it's worth it to advance ign timming on older(1998) poulan 46cc muffler mod. . & how much
@Doc-Cole_Trickle-of-Chainsaws Жыл бұрын
Hey Cool guy, do you have a Peter Frampton like Poulan (2750, 2775,2900)? If so, I'm about 2 find out on the ignition advance on this series of saw.
@coolestguyontheplanet723 Жыл бұрын
2900 farmhand 46cc
@Doc-Cole_Trickle-of-Chainsaws Жыл бұрын
@@coolestguyontheplanet723 I've found 2 at the scrap yard recently. One is the PP4620 like Frampton and the other is a Poulan 2775. All the same saw but some have a bare bore and chrome piston others chrome cylinder with aluminum piston.
@coolestguyontheplanet723 Жыл бұрын
Not sure how I missed this
@Doc-Cole_Trickle-of-Chainsaws Жыл бұрын
YT not send you notification 4 video?
@coolestguyontheplanet723 Жыл бұрын
Don't know
@Doc-Cole_Trickle-of-Chainsaws Жыл бұрын
@@coolestguyontheplanet723 happens a lot 2 me, not getting notification 4 new videos
@AndyH-13 Жыл бұрын
Runs like a scolded cat. All your hard work is paying dividends.
@anthonyoverbee2049 Жыл бұрын
That thing screams!!
@cajun3197 Жыл бұрын
💪🏽💪🏽💪🏽
@Tantrum791 Жыл бұрын
Anyone ever figure out how to stop the oil from leaking when not running?
@justincredible7168 Жыл бұрын
Next GiveAway Saw LOL !!!
@user-ih6ss5qt2m Жыл бұрын
Sweet! Get some!
@jamiewykes8585 Жыл бұрын
Holy mackerel!!!
@Doc-Cole_Trickle-of-Chainsaws Жыл бұрын
👍🆙BigGuy
@Doc-Cole_Trickle-of-Chainsaws Жыл бұрын
Maybe your go 2 saw for now? Looks great from here!
@Doc-Cole_Trickle-of-Chainsaws Жыл бұрын
With results like this, with the short blow down. I would like 2 see someone from the other side of the blow down controversy, produce results like this or better, if possible. You even went a little further than Matt suggested (by accident) and still turned out awesome! Do you think you affected anything with the 2 extra degrees of blow down, maybe lost a little torque? I would like 2 see someone challenge this and tell us why short blow down doesn't work or at least can't be used in a work environment👍🆙BigGuy
@aaronpowell4885 Жыл бұрын
@@Doc-Cole_Trickle-of-Chainsaws turned out awesome! I still don't see why some believe short blow down just doesn't work in a work environment.👍🏻
@mil-specmotorworks7805 Жыл бұрын
Just picked up a Husqvarna 357xp for $50 because of your video I decided to keep it, but I have a bunch of 40cc class Husqvarna has that I want to thin the herd and keep the best one I just don't know which the best one is I have a 141 142 a regular old school 40 and a 340 which ones would you keep? Thanks for any input
@fearghalmorrissey2601 Жыл бұрын
Id vote for 340
@mil-specmotorworks7805 Жыл бұрын
@@fearghalmorrissey2601 I got the 340 for free but it's in pieces cuz it blew up , I was impressed with the side cover being metal , is the 340 commercial grade like the 357xp?
@charlespeacock8360 Жыл бұрын
@@mil-specmotorworks7805 My 142 does great and I turned a 340 into a 350; same case. Maybe keep both.
@fearghalmorrissey2601 Жыл бұрын
@@mil-specmotorworks7805 not commercial grade but a good light saw that can be upgraded with bigger piston and cylinder...plenty of parts available too
@Doc-Cole_Trickle-of-Chainsaws Жыл бұрын
I would get a 346xp cylinder and piston for the 340. Go watch Dubb, Cajun and Lynch's videos on this chassis builds. Then decide how radical you want 2 go with the build.
@alexstromberg7696 Жыл бұрын
now get the stuffers from a 357
@lumbearjack1439 Жыл бұрын
Next on the list of saws to get...359
@shawncaudill424 Жыл бұрын
Wow I want 1
@NothingButChainsaws Жыл бұрын
Heck yeh!
@chainsawcanuck Жыл бұрын
Wow 👍👍
@lindachaffins4504 Жыл бұрын
I want it 😁
@ravenshield7823 Жыл бұрын
Holy shit!
@jjm3254 Жыл бұрын
👍
@lassila3 Жыл бұрын
I have 20.000 VOLTS IN MY BODY RIGHT NOW
@kenturner3268 Жыл бұрын
How would I reach Matt for port work on a 359.
@novicelumberjack Жыл бұрын
youtube.com/@Houseworksaws Or he is on Facebook
@kenturner3268 Жыл бұрын
@@novicelumberjack He didn't respond. Do you know of anyone near me that ports and is capable of this kind of result. I have a low hour 359 with a fresh OEM top end I would like done. I live in the Atlanta area(Gwinnett county).
@novicelumberjack Жыл бұрын
@@kenturner3268 You do know that I ported this 359, right? Matt just gave me some pointers on what to do. So, I could port it. Get ahold of me. Boedychainsaws@gmail.com
@kenturner3268 Жыл бұрын
@@novicelumberjack I emailed you. Did you not get it.
@BryanClark-gk6ie Жыл бұрын
One of my favorite saws I just got mine back from iron horse ' mines holding right at 13k in the cut with a 24' bar.
@anitahelton4698 Жыл бұрын
Looks like a sawdust shower
@harmontrucking4926 Жыл бұрын
Got a 24 inch Husqvarna light bar large mount for sale 50 dollars 2 weeks old
@lassila3 Жыл бұрын
It’s a bit hard to concentrate, I got 20.000 VOLTS in my body from a Partner 5000 saw