NewBeeDrone CinemAh - Trying a Ductless Cinewhoop

NewBeeDrone reached out to find out if we would be interested in taking a look at their "CinemAh" frame. Normally, I'm not that interested in looking at cinewhoop frames, because I love my Shendrones Squirt V2 so much, but I've had a couple situations recently where I needed to be able to do a dive and high rate of decent maneuvers that the squirt doesn't like to do, so I said yes, hoping that it would help solve those particular problems. Come along with us and find out!
If you decide to purchase, please consider using the affiliate links here below to support the channel!
NewbeeDrone
Frame -- CinemAh -- bit.ly/3l1Pada
Stack -- Infinity200 -- bit.ly/3l2vg1x
Motors -- FLOW 1408 2350 -- bit.ly/3COeDgj
FPV Air Unit -- Caddx Vista with DJI Camera -- bit.ly/3xru1Oz
Receiver and Antenna -- TBS Crossfire Micro -- bit.ly/3HQQo4Q
Battery -- Tattu 1050 6s - bit.ly/3nP9MHo
PyroDrone
Frame -- CinemAh -- bit.ly/3l1Pada
Stack -- Infinity200 -- bit.ly/3nLx5Sw
Motors -- T Motor 1408 x 2800 -- bit.ly/30UhFCy
FPV Air Unit -- Caddx Vista with DJI Camera -- bit.ly/3p0qmDp
Receiver and Antenna -- TBS Crossfire Micro -- bit.ly/3xiXyKn
Battery -- Tattu 1050 6s - bit.ly/3cKLMih
GETFPV
Frame -- CinemAh -- bit.ly/3l1Pada
Stack -- iFlight Succex F7 -- bit.ly/30Z4FeA
Motors -- T Motor 1408 x 2800 -- bit.ly/3HTbJdO
FPV Air Unit -- Caddx Vista with DJI Camera -- bit.ly/3CR4z62
Receiver and Antenna -- TBS Crossfire Micro -- bit.ly/3ki2OYd
Battery -- Tattu 1050 6s - bit.ly/3FNwpC2
Be sure to get your pre-order in for the Stay Flying Merch!
Stay Flying Hoodie: store.nurk.tv/products/cinewh...
Stay Flying T Shirt: store.nurk.tv/products/cinewh...
Mesh Back Hat aka the most comfortable hat in the world: bit.ly/352gy2a
Embroidered Hat: bit.ly/3w7dygY
All products: bit.ly/nurkstore
Consider following me through memberships: bit.ly/nurkmembership
or on Patreon: bit.ly/nurkpatreon
My Racing Drone:
Motors: Hobbywing 1750 // bit.ly/2QlgSnc
Flight Controller: Hobbywing G2 // bit.ly/2QfH9Dr (for sale!)
ESC: Hobbywing 40A 4-1 // bit.ly/2opqsWx
VTX : TBS Unify // bit.ly/2NyM0eb
Receiver: TBS Crossfire Micro // bit.ly/2LGgNUL
RX Antenna: TBS Immortal T // bit.ly/2MGS1ZR
VTX Antenna: TBS Triumph // bit.ly/2N3gDeU
Frame: HyphyMultirotors Wobbegong: bit.ly/2Arkr0W
Camera: Runcam Racer // bit.ly/2SeAG96
Lipo: CNHL Ministar 6s // bit.ly/2LH920S
Prop: Azurepower 5150 // bit.ly/2LG70Oc
Other Peripherals:
Goggles: Fatshark HDO - bit.ly/2rrEb3J
Get Started with DJI: - bit.ly/3crk3l1
DJI but I want my own radio: -bit.ly/3crk3l1
DJI Receiver Directional Antennas: TrueRC Patch for DJI - bit.ly/3cs3xBi (requires 2, not necessary, but amazing)
DJI Receiver Omni Antennas: TrueRC Stubby Singularity - bit.ly/3cqC2rD (purchase 1, comes with 4)
Goggle Receiver Module: IMRC Rapidfire -bit.ly/2IHtDq7
Goggle DVR Accessory: IMRC Powerplay - bit.ly/3cfr3kG
Goggle Battery Replacement: 18500 Batteries - bit.ly/2UyU9Vg (go in powerplay)
Radio: Taranis 9XD - bit.ly/35kYMsb
TBS Crossfire : TBS Crossfire - bit.ly/2BVwMgX
Solder: - bit.ly/nurksolder
Soldering Iron: TS100 - bit.ly/2KeBY5e
Lipo Charger: HOTA 15A - bit.ly/3piuH4e
Drone Camera: GoPro Hero Session 5 // amzn.to/2DgXb5I
Drone Camera: GoPro Hero 9 // amzn.to/32S7NHA
Big Main Vlogging Camera: Sony A7III // amzn.to/2N3ogSh
Big Main Vlogging Camera Wide Lens: Sony 10-18 // amzn.to/2PNI5ff
Big Main Vlogging Camera Long Lens: Sony 85 1.8 // amzn.to/2MCxiq0
Mic for Vlogging Camera: Rhode Video Mic Go // amzn.to/2l1lcqz
Tripod in the Sky: DJI Mavic // amzn.to/36GEDvZ
My awesome Pants: amzn.to/2kZ3ZOQ
Ultimate FPV Harddrive:
Western Digital My Wireless Passport Pro
4TB: amzn.to/2t8dilZ
3TB: amzn.to/2HXH2p5
2TB: amzn.to/2F5J708
Thanks to each of my sponsors:
Hobbywing
RunCam: www.runcam.com/
FPV-Direct: www.fpv-direct.com/
Futaba: www.futabarc.com/
China Hobby Line: chinahobbyline.com/
AirVuz: www.airvuz.com/
Check out my other videos! / nurkfpv
Follow me on Instagram: / nurkfpv
Tweet at me on Twitter: / nurkfpv

[@launchfpv7144]

Wow absolutely epic video, AMAZING presentation and really good filming. This is one of my favourite videos you have made! Love it and keep up the EPIC work 🤙!

[@mihirjani811]

Time for me to finally start building my own whoop! Thanks Nurk! You're always an inspiration

[@lostartefpv]

Sick B-roll, sicker flying

[@kantony6694]

Thanks once again guys, smashing it as always!!!

[@dougcooper4917]

Great Video, Great Build, and Great Flying! Thank You!

[@SpiralEyesFPV]

that opening montage was badass!

[@NURKFPV]

thank you so much!

[@baggszilla]

Thanks Nurk I'm in the process now of purchasing a Cinewhoop and this helped alot! Happy Thanksgiving and Happy Holidays buddy. Cheers!

[@NURKFPV]

Please consider using affiliate links!

[@mikexfpv753]

Very nice video man,keep it up🤘👊 Greetings from Greece!!

[@3DIYOriginal]

Dude, your KZbin Channel, IS AWESOME. Love how you fly this incredible FPV Drone!!! 👏🏻👏🏻👏🏻😎 Subscribed 👍🏻👍🏻👍🏻

[@NURKFPV]

If you decide to purchase, please consider using the affiliate links here below to support the channel! Click HERE! NewbeeDrone Frame -- CinemAh -- bit.ly/3l1Pada Stack -- Infinity200 -- bit.ly/3l2vg1x Motors -- FLOW 1408 2350 -- bit.ly/3COeDgj FPV Air Unit -- Caddx Vista with DJI Camera -- bit.ly/3xru1Oz Receiver and Antenna -- TBS Crossfire Micro -- bit.ly/3HQQo4Q Battery -- Tattu 1050 6s - bit.ly/3nP9MHo PyroDrone Frame -- CinemAh -- bit.ly/3l1Pada Stack -- Infinity200 -- bit.ly/3nLx5Sw Motors -- T Motor 1408 x 2800 -- bit.ly/30UhFCy FPV Air Unit -- Caddx Vista with DJI Camera -- bit.ly/3p0qmDp Receiver and Antenna -- TBS Crossfire Micro -- bit.ly/3xiXyKn Battery -- Tattu 1050 6s - bit.ly/3cKLMih GETFPV Frame -- CinemAh -- bit.ly/3l1Pada Stack -- iFlight Succex F7 -- bit.ly/30Z4FeA Motors -- T Motor 1408 x 2800 -- bit.ly/3HTbJdO FPV Air Unit -- Caddx Vista with DJI Camera -- bit.ly/3CR4z62 Receiver and Antenna -- TBS Crossfire Micro -- bit.ly/3ki2OYd Battery -- Tattu 1050 6s - bit.ly/3FNwpC2

[@v1b3dev]

First flight, new kind of construction and this level of control…impressive skills.

[@NURKFPV]

Thanks man appreciate it!

[@PropDusting]

Please make a build and tune video! This quad is intriguing! I love the power to weight ratio of it!

[@rotorbob]

Love the review! Thanks Nurk!

[@NURKFPV]

My pleasure!

[@YellowRoseDrones]

Beautiful house, BTW. Nice flying. I had to take a seat to prevent getting dizzy!

[@mikespeedyfpv321]

Sick quad great video

[@JasonSuterOssum]

Nice review and sweet drone, but you had me at the Hollywood-grade opening montage 😁

[@JohnRiggers]

I built mine hoping I would never have to repair it. Lol. That frame is something to put together!

[@whoopsquad]

I’m psyched!!!

[@NURKFPV]

Same!

[@155spy]

Awesome Flying Nurk 👌🏻 I often give my dogs a workout aswell 😂😂

[@isaacmitchell7780]

Really nice look at an interesting cinewhoop

[@NURKFPV]

It really is!

[@msd835]

Great exercise for the dog! treat them generously!

[@NURKFPV]

They are treated very well. ;-)

[@PMcDFPV]

Would love to see ya tune it :) Great video

[@NURKFPV]

i'll get after it!

[@embededfabrication4482]

you can adjust the throttle sensitivity in hover of ANY quad in betaflight by just changing the throttle curves BTW.

[@aphinion]

Dude, what an amazing building vid! And finally cinewhoop that's all carbon and lightweight! Amazing review, too. I just can't stop thinking it appears really fragile with that thin carbon that seems to flex quite a lot...

[@gus8378]

Would love to see a 5" version of this. I've been looking for frames with prop guards that are lightweight. Not to carry action cameras, but just to fly for fun and have a little bit more peace of mind while flying proximity.

[@divingfalconfpv4602]

There a 5" whoop. But it's expensive. Drone Co shotcaller. But really u can get any 5.5" 6" drone frame and put stanfpv ducts on it and make it 5" cinewhoop

[@natetwedten1724]

@@divingfalconfpv4602 that shotcaller looks really nice. I would like to see some reviews on it. He has an adjustable camera angle setup with a servo. Not sure if that is a big deal, but looks really neat.

[@divingfalconfpv4602]

@@natetwedten1724 think nurk did a review

[@zidviziouz]

Here for the doggies.

[@NURKFPV]

They're the bestest.

[@ceazy1861]

that thing moves

[@Antsmith21]

Thank you for the interesting video! I really love the squirt and the slammed squirt but I would be really interested to build call the weather and TPU ducts don’t mix well.

[@NURKFPV]

Thanks for checking it out!

[@sakfpv8444]

I took my diatone taycan 4s, with the 1606 3750kv motors and put it on a similarly weighted frame, the geprc cinerun, and my god...I love it now. I wish I saw this frame before I got the geprc frame, but it's OK. It Flys so damn good with betaflight 4.3, 48khz rpm filtering. I use a 800mw speedybee VTX and a runcam Phoenix JB edition, and I fly it more than my toothpicks, and more than my 5" quads. It has more "fun" factor. I have a couple SD cards with footage I'm going to finally put together and put on youtube...one of these days. But when my geprc frame breaks, I'm definitely getting this frame to replace it.

[@flowstate_link]

🤩 wow

[@ericlajoie8028]

My favorite part of your videos has to be your dog's chasing the drones lmao

[@LeviathanFPV]

I'm sure it's in the comments, but they offer tpu ducts and a tpu battery strap for it to use when needed. On set, it's almost a requirement for more prop protection. The TPU battery strap else pulled it in the back as a really cool idea.

[@NURKFPV]

They sent it to me since I finished filming the video

[@kenstone5479]

Looks like a great whoop but I wonder how well those frame screws around the motors would hold in a crash. Great video, Thanks!

[@NURKFPV]

I genuinely think that it will be alright for the majority of crashes, but I haven't had any bad ones to test it out yet :-(

[@embededfabrication4482]

put a camera on the back of a quad and get some vid of your dogs chasing it around, they love it.

[@sticky_ricebowl]

stop making everything look soo goooooddd!!! my wallets dead mann!!! 😭

[@PKNEXUS]

I noticed in the description that the recommended motors are T Motor F1408 2800 kv, they are a 9m motor mount (i found out the hard way), and the frame only supports from what i can tell a 12mm motor. Am i missing something?

[@robmulally]

My Slammed squirt with 5 blade props is pretty quiet.

[@brettalexander.studio]

I'd like to see you try the cinelog 35 too and compare them.

[@NURKFPV]

We shall seeeee

[@chrisyoung8062]

Really a lot of flex in that frame. I'd like to see what the blackbox looks like? You comment about it needing more tune is probably due to frame resonance. May be hard to tune out.

[@mikehrenak1390]

Love your dogs and video air2 s army out

[@NURKFPV]

yeah buddy!

[@vtowndegekste]

I heard they also have some tpu slammed ducts for the cinemah. I have a naked Taycan so without ducts and it fly's so much better then the squirt and also is much quiet. But with the naked taycan the props are also not protected so i can only use it when i am not close to people. Nice video Paul😉

[@NURKFPV]

They do - they sent them to me after I finished filming the video. I think there will always be a need for both options ya know?

[@thelethalmoo]

wonder if you could print on some clip on mini ducts for extra woopy days

[@fatheadfpv5732]

im a noob and your flying is sorcery to me!

[@divingfalconfpv4602]

Would 1507 be too short for this? Does it have to be a 08? Just saw 20x20 m3 mounting. Not many fc and esc 20x20 are m3 screws

[@danhoene]

Would you say that the terraplane is for faster action like mountain biking or skiing versus slow and precise like for building flythoughs? Was leaning towards a terraplane, but now wondering about other small, full gopro carrying quads.

[@the_darkside_fpv]

Dude that thing is a missile. Well crap I’m bout to be broke😂😂

[@bizzfpv3984]

up tilt , fast boi

[@NURKFPV]

yeah definitely needed more

[@CyrusHostetler]

custom 3D printed TPU ducts on this would be pretty sweet.

[@r.eyvprdctn]

what do u think about the cinelog35 ? it has more protection but is as non fragil as the cinamAh plus it's much easier to build plus pusher config plus... minus no variable gopro mount minus..?

[@ClarkDroneFilms]

Similar to a qav cine 2.5" with just carbon guards (but the qav also has optional foam "ducts")

[@NURKFPV]

very similar

[@robert-gille]

Winston mentions some kind of props with his usual slammed squirt quads, what does he say?

[@meh-87]

Quad looks cool.. 24p with no ND filter looks really messed up. Wish people would use 60p if they're not going to bother with nd filters and exposure.

[@vleeg9251]

Any advice on a cinewhoop that is sub 250 incl battery without a gropro?

[@KhoPhi]

"I've not yet had a huge crash with it" Well, I was looking forward to a real crash to actually see how it fares. I've had some pretty severe crashes with my holybro and it works fine still, just replace the duct. Not sure how replacing the parts on this is gonna be.

[@andres.freelancer]

Hello my friend! please take a look at the new GEPRC Cinebot30

[@tumurzfpv6547]

Okay I really need to know, Does that antenna push in by design? That was one of the most wonderful things I have ever witnessed. It's right at 10:38

[@tumurzfpv6547]

I think I figured it out, Maybe it just has enough play with the wire it's able to go in/out? Please confirm if you can!

[@youzrnaim]

Why does the frame rate from the Hero 9 footage seem laggy? And what's that PCB on the side of your goggles?

[@Aaron-fc9tg]

want to build an analog version. can i put in an 22mm wide camera ? (runcam swift mini 2)

[@carloszamora1770]

Could i put bigger motors on my newbee drone 65

[@dronefilmsgermany]

Do they have a bnf version or I need to buy all parts and build?

[@mattraymond2935]

1407 flows what kv2350 6s?

[@marc_frank]

gotta try those props but i have to make new arms first

[@NURKFPV]

They're pretty decent. I think I like the hexa blades better, but they don't have t mount versions of them.

[@marc_frank]

@@NURKFPV oh yeah, that's a problem i just want to try something high blade count on my 4"

[@bullifpv1630]

Hi Nurk, is this frame currently only available in the states? Do you have any information as to whether there is an EU shop that has the frame in its range or will take it up? Shipping costs from the USA is just too heavy 😉 greeting bulli_fpv from Hanover in good old Germany

[@keithdrones1743]

Hi from RI

[@NURKFPV]

Hello there!

[@JeromeDemers]

Interesting that people on set told you the squirt is loud. Which is true.

[@NURKFPV]

Yeah a couple times they've raised concern about how loud it would be just in terms of being able to communicate over top of it etc.

[@ClarkDroneFilms]

Hey Nurk you got any plans for a video on tuning cinewhoops? Most videos online are for 5"

[@NURKFPV]

Not currently planned for, but if enough people ask I'd be interested.

[@Xplicit_fpv]

@@NURKFPV u gotta bro!! It would help alot of people

[@fpv_wolle_der_dolle6236]

@@NURKFPV Would love to see one too!

[@jacobdimick7070]

Can this work with an analog setup? (for those of us who haven't swapped to dji)

[@NURKFPV]

definitely

[@mfrfpv9079]

any frame in goggle view?

[@marcinsamotyja]

Is 130C battery nessesery? or 95C should be enaugh?

[@NURKFPV]

95 should be fine

[@gus8378]

10:38 what the heck is that retracting antenna

[@Xplicit_fpv]

I have a lot of cinewhoops and love different looking ones. I was super interested in this one but. I dont think it will hold up to chrashes...

[@NURKFPV]

I hear you and I share the concern but I think it will surprise us with how strong it is.

[@Xplicit_fpv]

@@NURKFPV appreciate the reply!!

[@maddmavic]

Hey I'm new to the fpv scene. I'm having issues with a forward to side ways transition while keeping the moving subject in view in a decent manner. For example when chasing a subject or vehicle. Any chance u got any stick tutorials on this. I'm sure it's simple to do but my brain can't figure it out yet with out fearing I'm going to crash. . so it won't pick up the correct movements at all.

[@ficere5192]

If you don’t have a simulator like DRL or Velocidrone yet I would highly reccomend practicing moves like that in the simulator first to sort of get a feel for them

[@maddmavic]

@@ficere5192 it's all good I figured it out. I'm a fast learner.

[@WrongWayFPV]

Here's your comment buddy ☺️

[@NURKFPV]

Legend!

[@chonk1221]

What are your thoughts on the cinesplore

[@NURKFPV]

Not sure what that is

[@benovidla9600]

What's the carbon thickness?

[@importon]

I would also like to know this. They want $90 for this and they don't have any detailed specs

[@user-lg9gg2uf5v]

1:50 music name, pleeeease! sounds epic AF

[@NURKFPV]

artlist.io/song/3919/chimera-soldiers

[@Sir_Hubris]

I ♥ your different socks hahaha ¶ ;-)

[@NURKFPV]

Life's too short for matching socks.

[@xymaryai8283]

cinewhoops kinda need ducts to be what they are... i prefer "cineboop" to classify this quad

[@SeeSharp10]

Nice video! Very interesting build! Typo in description, in section Other Peripherals! Same link for: Get Started with DJI and DJI but I want my own radio

[@natetwedten1724]

Do most cinewhoop pilots fly on Rate Mode?

[@NURKFPV]

Yes

[@natetwedten1724]

@@NURKFPV Indoors too? Do you have recommendations on what to practice and what settings to use in Velocidrone?

[@PkwyDrive13]

Don't your pups get tired of chasing Drones they can't catch? 😂

[@extremeboatdockingmedia]

Kind of sounds avata-ish

[@LehtusBphree2flyFPV]

HOW MANY DRONES HAVE YOUR DOGS EATEN. HAVE YOU TRAINED THEM TO FETCH YOUR CRASHED DRONE WITHOUT EATING IT?

[@NURKFPV]

NONE AND NO THEY JUST WANT TO TEAR IT APART!

[@DavidTavares1110]

Cinewhoop without ducts is not a cinewhoop

[@NURKFPV]

As one of the two people that coined the term, I disagree.