Nyrius Aries Pro Wireless HDMI Review + DIY Director Monitor Rig!

[@TheGroovyGuitarDude]

Got a G7 a few days ago in large part due to your recommendation and I am in love with it! Thanks Caleb!

[@dslrvideoshooter]

Nice man! Glad you dig it! Just bought one again myself. Probably the best budget camera right now.

[@mmc5261]

DSLR Video Shooter so wait no one is gonna talk about the fact that the company says it’s 0 latency and this guy is saying there is

[@Armoton69]

Nice to see other rig solutions for this product! We have also been using the nyrious for wireless directors monitor setups. Looking at the design It seems ours is an older model than yours, maybe ours isn't the pro. In the beginning we had some problems powering it, only certain cables would work and not all 5v outputs were able to keep it powered. We found that the USB on SmallHD monitors, with the right cable (we soldered our own), worked perfectly to power the receiver but onboard the camera we had to use a clunkier solution with the transmitter. A NPF battery plate with a 5v USB slot. Also we could not transmit the image from the Odyssey 7Q+s hdmi out for some reason, instead we used the FS700 own hdmi outport, which meant we couldnt transmit the 7Q+ playback wirelessly. This has also worked nicely for focus pulling, since the delay is so small.

[@HarryInEdi]

You channel is on the verge of an INSANE boom! (it was 100k only a few weeks ago I swear!)

[@dslrvideoshooter]

Thanks Harry! You guys have been very good to me!

[@BaylorCaughornBTC]

When I saw the thumbnail I immediately thought about the applications available for gimbal users. Awesome video as always

[@dslrvideoshooter]

Thanks Baylor!

[@natemclean5152]

I purchased this Nyrius Aries Pro and made sure to get the 100ft range one, but I couldn't go 20 ft without losing signal. I did multiple device tests and they all were terrible. I really wish this thing worked, I'm stunned how you got all the way upstairs.

[@Sronpop]

Absolutely love this. I've looked at teradeks and paralinks and even their cheap models are way out of my price range. Think something like this can have a lot of benefit for 2nd AC'S. one of the bigger jobs I was on, the feed to video village was running out of the focus pullers monitor, being able to ditch that, or any other bnc would be a huge bonus. 100% keeping this setup in mind for the future

[@digitalcyclopsvideoproduct867]

I'm still rocking the Nyrius. For the amount we use it, it is sufficient. I know there are quite a few other options out there, but they start north of $1500.

[@davidp158]

Thanks for the review. Your tip about using the remote monitor for reviewing lights when adjusting them. Smart!

[@seanconley]

You answered every single question I had regarding this system. Thank you!

[@eleonora.]

Great, man. The best diy director monitor rig in the world, Thanks

[@IntegraDIY]

This has to be the most complicated rig setup so far, looks badass

[@dslrvideoshooter]

Haha! Thanks Integra!

[@lncstyle]

Hello Caleb. Do you still use this Wireless Director's Monitor setup today? What would you do differently, if you had to build a wireless setup, almost 4 years later? And lastly, would you consider doing a dual wireless Director's Video Village for a 2 camera production? Cheers!

[@SullyCortez]

ha! I just made this exact rig basically about a month or two ago. I love it. One problem i'm finding though, the pro 'receiver box' is really finicky with which hdmi cable you use. thanks for the video caleb!

[@dslrvideoshooter]

Nice! Hmm. I must have gotten lucky with my HDMI cable.

[@SullyCortez]

Yea maybe it's because I have the actual 'pro' version. This particular version according to Nyrius is their new 'pro version' but its' for in home pro use. There is a more expensive longer range supposedly better transmitting unit (NPZ550 I believe) that is made for outdoor use. When I asked Nyrius was there a huge difference in specs between the two models they said not really other than distance slightly and the shape of the units themselves.

[@SullyCortez]

the 'pro' version has 0 latency.... i mean like none. you can pull focus off it.... this new 'pro home' edition appears to have significantly longer latency than the 'pro' version the $500 version.

[@kenrhem]

When i go to their website, it mentions the "prime" (NPCS549) which they advertise as having shorter range (makes sense) and zero latency. Is that the one you're talking about?

[@playprostudios712]

Good stuff always happens on this channel... wow! I wonder how this would fare though to output from an atomos ninja 2-to-HDMI LED TV?Great work Caleb!

[@raulalaris]

Just made my rig! Works so well! Thank you thank you already had a lot of the parts lying around.

[@EricLefebvrePhotography]

Love your videos. It's nice that you found a different video making niche compared to the other channels I follow. 4:40 *Bag o' zip ties* Bag of zip ties, bag of random size rubber bands, bag of Velcro wire tie wraps, box of various sized 1/4 / 20 bolts and nuts, bag of double sided sticky tape, box of various A clamps ... :) 7:44 CUTE BABY!!!! 10:14 *WHY?* How useful would this be if you connected it to a capture system to get backup footage? So you are recording to your cameras internal memory (CFCard, SD Card, CFast ... whatever) and you have this thing connected to a PC capture card or a dedicated HDMI recorder (cheap gaming one or a Atomos Ninja or something)? I know you have all the interface overlay showing up but on canon (at least) using magic lantern you can disable all that if you really needed to. I'm not sure if this would be useful or even practical, just kind of bouncing ideas off the wall. I'm sure the transmitter does some crappy encoding and compression to get good data transfer speeds so not sure the end footage would be very useful. Thoughts?

[@dslrvideoshooter]

Thanks Eric! Honestly, using this unit for capture might just work. It has a small latency (a few milliseconds) but it never lags further and stays consistent... Audio also is linked perfectly with video so it would probably work! I have no idea how grade-able the footage would be or how much they compress the stream. But for gamers, it would probably be totally fine.

[@robertruffo2134]

The lag is from your Camera's HDMI output and your monitor. Nyrius Pro itself has no perceptible lag.

[@mmc5261]

Thx finally someone addressed the latency problem thx all these other comments are so stupid

[@PavelRadu]

great tutorial as always Caleb!

[@dslrvideoshooter]

Thanks Pavel!

[@Skace99]

Love it ! I was already considering buy this things, but now, I'm sure this would be the next things on my list :)

[@ChristianRobinson]

love your videos. many of the parts are discontinued so I will have to come up with a newer parts list but he concepts are the same. Thanks.

[@mattewsdinelson]

REALLY REALLY AWESOME MAN! Thank you. Helped me a lot, definitely a lot. How about a video introducing a great audio wireless receivers???

[@dslrvideoshooter]

Thanks Matthews! I have plans for budget wireless audio gear videos!

[@CreepyCoolPictures]

This is rad. I wonder if there's a way to tap that signal into an iPad. Great post!

[@dslrvideoshooter]

Would be awesome!

[@Ry311GP]

you have a nice house. glad you got your kid in the scene. thanks for another great review.

[@dslrvideoshooter]

Thank you Ry!

[@aHighway2Hell]

thanks for the house tour!

[@rgsauve]

Great job with the channel! Love your stuff man.

[@ClarkdeBear]

Well done, Caleb. Another brilliant review and fantastic DIY! Are the Anker batteries best bought via Amazon or directly from Anker?

[@dslrvideoshooter]

They have a huge presence on Amazon. Thats where I've bought all mine.

[@ClarkdeBear]

Thanks, Caleb. Merry Christmas to you and your family!

[@dslrvideoshooter]

And to you as well!

[@madshauerslev]

got this exact kit. Aries Pro, full hd monitor, Anker powerbanks. But transmission isn't very good. Transmitter and receiver can be couple feet apart, and if person with receiver turns back against transmitter, signal dies. Distance can go to about 25feet if transmitter and receiver is pointed at each other but not even that long if its just used in a room with chairs and stuff blocking monitor

[@carlosbradley2451]

I mimicked this setup but I upgraded the antenna on the Nyrius. Really quick simple and easy and it intensified my signal... I can go through walls (if of course it doesn't have concrete)...I really recommend upgrading the antenna on the Nyrius for further distance. Remember you have to also manage the signals around you. A lot of things use the 2.4 GHz so if you can limit some devices in your home it will help too.

[@TylerVincent]

Really exciting stuff! Been waiting for a cheaper option. How did all the rigging come up to be that much? The parts you posted were barely over $100. Thanks man!

[@dslrvideoshooter]

Good save! I think I was working on two videos and mixed up my spreadsheets. I've updated the description.

[@jbproductions6676]

What was the official delay time from the camera? Looking at using this for Multicam situation.

[@TobiasBx]

Cool Video Nur i think an normal Monitor with Kabel is esyer to Handel

[@EricLefebvrePhotography]

But if your camera is doing a lot of movement like a foot chase scene you can't show the director a live feed wired. Let's say your short film has a foot chase scene. your director needs to be able to see what the camera is capturing. That's when a wireless system like this comes in handy. Before this, a wireless monitor system was ridiculously expensive (thousands). So if you have a camera doing a lot of movement a wireless monitor for your DP and focus puller is a must. If you are shooting some talking head interviews then a wireless system isn;t that important. :)

[@TobiasBx]

Eric Lefebvre ok Thats Right And thanks for the fast answer

[@RobertoLicardie]

Hi Mate! Love this setup. Think you can help me out?! I run a church video team, We're not huge like all the big churches so we need to cut corners when it comes to our budget. We already own a Nyrius Ares Pro transmitter. We use it like this: Camcorder is inside the church, we then transmit about 70ft to the receiver. The receiver outputs HDMI, right? So we convert it to SDI and run it about 200 feet to the video room. Now, Here's were i need your help. Im thinking about getting a G7, GH2, or GH3 to do the following: Run it in 1080i @ 29.97 fps, and send that clean image to the receiver, then convert it to SDI and then run it to our video room. The video room has an ATEM Swithcer (1080i) which we mix with, and send a final output to the streaming computer with Wirecast. We want to do something more cinematic and of higher quality. Do you think it's possible to do this? We need the camera to be on, and sending a clean HDMI signal, for about an hour. I know M43 cameras can run for a while without overheating. So there lies my dilemma. Which Camera do you recommend?

[@bendadams]

thanks for the practical review.

[@reddanselmo8781]

I have this setup also. If you were contacted by Nyrius themselves, can you suggest them to have a dedicated product for us filmmakers? I mean an internal battery for the transmitter would help reduce cable clutter. Plus a mounting option. 😁 I wish DJI would come up with a similar product too.

[@dslrvideoshooter]

I hear ya! Nyrius actually markets this unit as a filmmaker solution: www.nyrius.com/wireless-hdmi/aries-pro-wireless-hdmi-transmitter-receiver (bottom of page). My guess is they want to keep costs down and offer a single product for several situations. Adding a battery would bring R+D costs up a lot I'm sure. That said, would probably be affordable for them to develop a thin battery that snaps/locks onto the transmitter and receiver.

[@teckno_senpai]

this review is godsend.... thank you always caleb!!!! damn.

[@FalcoII]

I'm surprised that you didn't go for the ribbon HDMI on the transmitter. Also very nice righ, but fails when I want to go 4k :( as with the monitors, 4k rigs get expensive (at least the VL35 is there to save the day for monitor options).

[@dslrvideoshooter]

Here is a great budget 4K compatible monitor: amzn.to/2inkscn

[@FalcoII]

Great thanks, you're like PI for budget eqipment! :)

[@NomadFilmmaker305]

Thank you! You are the best!

[@TONYCOOLSFISHING4X4TOURING]

Thanks Mate great info cheers

[@thechichoandgamers]

You are a genius man, thax for you Work!!!

[@provisionprism]

This is great, Caleb! Quick question - is it possible for this unit to send a signal to 2 receivers, or is that not possible? Say I buy 2 of these units. Would one transmitter technically transmit the same signal to two receivers, so we have 2 field monitors? The idea is to mount the TX to a camera on a gimbal, then send 1 signal to the operator rig, and the other to a director's field monitor. Is this a stretch in your opinion?

[@KenTanis]

In the name of science, I'm curious about this system vs monitoring via the wifi app on your GH4 - which will have more range? Which will have less lag? To make things crazier yet, the product description says the HDMI is "uncompressed". Would it play nice with a 10-bit signal and an external recorder? Plugging the receiver into an HDMI capture card and from there running some software like OBS to record or stream opens up some really wild possibilities. Cool build! EDIT: I see you've already discussed this with some other commenters.

[@dslrvideoshooter]

It would be very interesting to see how this would perform with capture devices... Maybe I'll try that sometime!

[@tonehaus]

The BABY!

[@spudulike118]

This is so good man. I’m thinking of building this out with my SmallHD 702 and pairing it with FoolControl for the red raven for a wireless monitoring/control/follow focus rig. Questions though, before I go ahead and buy anything, have you found any newer bits and pieces to upgrade the rig? Is there a larger battery out there that would power the 702 longer since it draws a lot of power? Thanks man!

[@meredithwilliams2254]

Thanks for this presentation. Had an issue recently with my set-up: camera , Sony FDR-AX700, monitor, FEELWORLD F5PRO; and this transmitter, powered by an Anker 10000.mAh. Receiver was approx 75ft away elevated with good line of sight in an open sanctuary. Transmitter would not "send" signal when connected to output of the monitor and had to be connected directly to the camera. Then it struggled to stay connected to the receiver. Your thoughts on the possible cause of my issue?

[@stnthms]

Thanks for the review. Clears up a lot of question I had about this system. I have need for two receivers system with one transmitter, One would be the director/producers the other would be for audio mixer. I guess i could hook up two transmitters with a little splitter but trying to avoid extra gear. Have you tested such. if I buy two systems. If one transmitter can work with two receiver and receive the same output. Wondering if the wireless is open or if they are locked into one transmitter and the receiver it came with.

[@alibaba1708]

Awesome man, you made my day

[@dslrvideoshooter]

Thank you for watching! Glad you enjoyed it.

[@nico_ugarte]

Hello Caleb, i was wondering, did you try this system on a 4k camera? i'd like to know if the system downsamples 4k so it can be monitored.

[@MJVPhotography]

I have been asking myself this same question! have you been able to get an answer?

[@anatoleyun1886]

Nice video. Good job! Thx for all your advice. Just a question. How this setup work ouside? In town? thx

[@digitalcyclopsvideoproduct867]

Just curious Caleb, any updates on this with newer hardware out now? Still seems like one of the more common options?

[@jackho74]

Nice vid dude!, what camera do you use to record these?

[@dslrvideoshooter]

C100 for the talking head stuff, GH4 for the table top stuff and a GoPro for the monitor connection test.

[@ActorsReal2Reel]

anybody have trouble with pushing Record and your LCD screen going black and only the wireless monitor working??? It happens as soon as you press record...I don't like using the Play Memories Wireless way because I can't use my Picture Profile Settings and theres no sound...

[@eliashnmyr7089]

Nice, I love your videos.

[@moeshickenyay]

Good looking rig, could it be used with a wireless follow focus, latency and all that.

[@THelvenstine]

moeshickenyay with latency that is more than a few frames behind, the focus puller will have already missed his mark, especially if it’s for high mobility shots, there’s no way in hell you’ll be able to nail focus.

[@omarjuarez6713]

great video! what type of cable is used to connect the battery to the monitor?

[@EposVox]

Nice review.

[@dslrvideoshooter]

Thank you sir Vox!

[@mayomode]

Look very nice, I'm looking for a live camera system to send the video signal wirelessly from the stage close-ups of the dancers to a mixer, an option would be airbeamer with an iphone but we would be delayed and not the most reliable of the world, another option would be to use a blackmagic pocket with a video transmitter Teradek connected to a video mixer and to be able to see the images in a projector, what about your system? do you think can work in the situation i'm exposing? Thanks.

[@visionsbyriley5579]

great video i have been going crazy not being able to run a client monitor and teradek well thats way out my budget. what about if you have lets say a gh5 with a small hd focus monitor for cam op but still want to have this setup for secondary monitor , i heard you say something about a dongle , but not sure whats a good one to get, or how to hook it up.

[@mizadfunkzionentertainment5801]

Thanks for the info. I purchased you g7 guide on how to set up the camera awhile ago. My question is do this set up work with the g7 in 4K mode as well as 1080p? I am about to purchase this parts. Please let me know? Thanks.

[@DatoAliffAlex]

does this work if my camera setting is 4K. but not 1080p?

[@TopshelfJunior]

Hey Caleb, since the 'SmallHD DP4" is no longer available, what would you say is a good alternative monitor ?

[@jedupree91]

Really great option, but how do I stop my a7sII giving blank screen whilst recording and outputting hdmi?

[@legendp2011]

have to change quality to 1080p and ensure your auto evf swicthing is turned off

[@FrescoFilmz]

Can you recommend one that Support 4k at 60fps with the atomos. It would be used on a Rig

[@ShotbyPicto]

Nice video, thanks. When I run my a6300 with my SmallHD 502 in 4K mode, although I can monitor both the LCD on the camera, as well as the SmallHD monitor, when I hit record, the LCD on the camera blanks out. That's fine when I have the monitor attached to the camera (or gimbal) but if I wanted to be several feet away, that would of course be a problem. How, if at all, have you got past this issue? Thanks again...

[@dalehartlieb6853]

Am I correct in assuming it also transfers audio as well?

[@dslrvideoshooter]

Yep!

[@dragonflymedia3979]

nice review

[@georgesvanev3183]

I was wondering if after a year you are still satisfied with the setup and the Nyrius?

[@REGULUSFILMZ]

good job

[@everrealricky5252]

THANK YOU SOOO MUCH. I WAS I NEED A WIRELESS MONITOR HOW DO I EVEN WORK IT :)

[@MJVPhotography]

Hey Caleb, Thanks for this helpful video... I know this was posted a while back but I am hoping you can answer this question for me? I use a Sony A7SII with an Atomos Ninja Flame, I am thinking of purchasing all the products that you recommend In the video, will this setup work for videos that are shot in 4K? I know the Nyrius Pro is 1080p. if my camera settings and the settings on my atomos are both in 4K 24P, will the Aries pro able to transmit the video? Thanks for your time

[@tscmediafilm8599]

How would this set up work when you want to have two monitors? One for the director and one for the camera operator?

[@legendp2011]

Have you tried the CAME-TV Cineready Wireless HD 50m version. can't find ANY reviews on it

[@joaquimbayle639]

Hey ! great video ! I was wondering would it be possible to get the same configuration but with a second monitor with a HDMI in and out (for example the ikan 4K) mounted on the camera and plug with the transmitter ? Thanks for your time !

[@rawstart2621]

As a replacement for purchasing an actual field monitor; is there a way to use my tablet as a filed monitor with my Sony a6300...or, maybe even using my smart phone?

[@dslrvideoshooter]

Yes, the sony play app would do the trick. It is pretty buggy though. Unfortunately no other tablet/phone app option.

[@nerframbo2012]

How good is this for a live stream event in a big but open room

[@richardsunga9528]

does the transmitter also transmit 4k? I have an a7sii and as I don't necessarily shoot in 4k for most of my shoots I want to know if the option for 4k wireless streaming for such a rig is possible. since I am trying to purchase a new 4k monitor due to the fact that I ran into some issue with monitoring when my rig lack the capability for 4k compatibility.

[@liferesurrected3682]

Caleb in videos like this you do voice over, what does this like rode pro into zoom? Is that the best way if I have nothing or something like yeti snowball?

[@dslrvideoshooter]

Yes, I used my Rode VMP going into my computer via the blackjack interface: amzn.to/2hrf6w3

[@billlima3103]

I have 2 questions about this: 1) Can I use a HDMI 2 port splitter cable plugged in the camera, using one port to plug a monitor for the camera itself and the other one to plug the transmitter for the director's monitor? 2) Even using 1080p monitors, can I still record in 4K? Thanks in advance!

[@keithbohler7894]

Has the Nyrius Aries held up to it's good word? I've been reading about an IOGear product similar to it that starts having issues after 15 months. Really need one of these for a pro-sumer level weekly live production. Would you recommend the Nyrius Aries or have any other recommendations for a budget-friendly wireless video unit?

[@LesTutosdUneMinute]

Cool

[@seanconley]

Just got mine in the mail today. I thought I could run HDMI into a monitor and then run the Nyrius out, to daisy chain the signal. Unfortunately I am not getting a signal. Do you know if this is possible? I don't see why it wouldn't be but I am stumped at this point.

[@joaquimbayle639]

Hey ! I was wondering this too ! did you get an answer on this ?

[@seanconley]

Joaquim Bayle Yep I got working.

[@StickerDigital]

sean conley how did you get it to work? I'm trying to go from my camera (1dx mark II) to a atomos ninja flame and and plugging the nyrius to it and I can't get it to go

[@mychalmitchell323]

I have the most unique question to you Caleb or anyone who can answer. I want an external monitor attached to my camera because my a7sii's monitor is too small to really see. Plus I want to use MY wireless system with my steadicam/gimbal, which means the camera is not right in my face therefore I need an external 7 inch monitor. So does anyone know of a micro cable to hdmi splitter option where the splitter is SELF POWERED?

[@enocmendez4433]

So this setup would only work with a single use monitor? I use a a7iii cam and I'd like to use this for a directors camera but I would also like to have my own monitor on camera.

[@eddieduque9371]

So I don't need most of the stuff if I want to connect the transmitter to the camera and the receiver to my video switcher?

[@gstrange42]

I Just finished an tested my own Wireless Directors Monitor, The whole thing including monitor and all accessories cost me just over £300 and that including 4x NP-RF500s. If you don't mind a little bit of time gathering kit, construction and soldering you can build one cheaply. I used the PureLink CSW100 system as the core as it is capable of 1080p 60fps, and with the Neewer NW-760 it works well with about the same amount of lag. ecksmark.com/diy-wireless-directors-monitor/

[@MJVPhotography]

awesome thanks for posting this!

[@dreamfootage9575]

tried using the same set up and this item failed. I will contact Aries and see what they say as I am in Toronto and they are in this area....my buddy bought another and the same problem. ITS BEEN A MONTH and fails in less than 20 feet...this is suppose to be the 100 ft line of sight unit!!! cameras....sony nx5u. canon 80D.5D mark4.

[@jeremiahjohnson_82]

Same here. In studio with the receiver plugged into AC power, and a 1080p tv, and the transmitter on camera with a usb 5v 3amp battery, I get like 20 to maybe 30 feet. When I have the receiver hooked to a lilliput 7" monitor and the reciever running on a usb 5v 3amp battery outside in the country, or in the city, I was only getting maybe 5 to 10 feet before it would cut out. All line of sight. Im not sure if its my power supply, monitors, camera settings, or the Aries.

[@brianhenderson9057]

I have a gimbal and will not be able to have that on top of my camera Is there a less cluttered way to get a wireless signal

[@bluefilmsltd]

What are your thoughts on the optical quality of the Nikon 29-70mm f2.8?

[@FadeFlixChannel]

I have a question, do you know if you can use multiple nyrius aries pro in the same room simultaneously or would the signal clash with each other? Im trying to use with my blackmagic atem and use 4 wireless cameras going into the hdmi input i think that would be great if it works.

[@cyvidal10]

what is the difference between Nyrius Aries Pro & Nyrius Aries Prime? thanks

[@TheGreatEntertainment]

Car chase sequence !

[@noeldarcyphotograpy]

Any idea of where to get this in the UK?

[@coefficientmedia]

Its a little off topic but what is that cheese plate you used on the rod mount? I am looking for something just like that to fit under my a6300 cage.

[@dslrvideoshooter]

Its from this accessory: www.bhphotovideo.com/c/product/1073735-REG/walimex_pro_20197_aptaris_universal_l_bracket.html/BI/6566/KBID/7173 Another option might be this: amzn.to/2hVccTA

[@StickerDigital]

Hello Caleb, I hope you can help me with this, I have a canon 1dx mark II and I'm using a atomos ninja flame as a recorder, I'm plugging a smallHD 501 to the receiver and Vice versa and I can't get it to work, I try it out with a play station 4 as a video source and nothing, do you know if the nyrius pro work with any of these monitors? Thanks love the video by the way!!

[@bdonne07]

Can you plug in headphones into the monitor to get a remote audio signal as well (if someone off camera in a different room wanted to hear what was going on)?

[@dslrvideoshooter]

Yep! As long as your monitor has a headphone jack.

[@dimkrs4322]

HEY man can you tell us which CAMERA BRAND do you prefer (Nikon-Canon-SONY-lumix)???? thanks!!

[@SherwynSantos]

Would you recommend a 1st AC pulling focus from this set up, or is the delay too long?

[@kendricksatterfield5724]

Caleb, do you think that the latency on the rig is low enough to pull focus off of?

[@dslrvideoshooter]

For normal shooting situations? Yeah I think so. For super fast paced pulls you might run into issues.

[@EricLefebvrePhotography]

***** they have a pro version with apparently 0 latency.

[@itrimibest]

I have a question. I am shooting a short film with the a7sii. Do you know if the camera has the ability to output through HDMI to Small HD (701 or 702, with LUTS) through to a Nyrius ARIES wireless for directors monitor? My worry is that the a7sii will be bogged down and unable to handle that much draw.

[@ankur5238]

Hey I was wondering if you could suggest a camera for me. I am looking for a camera that I can vlog with AND do videos like you do where you are indoor and the camera is set in one place. I am also a beginning videographer , so nothing to fancy. My budget is anywhere from 1000$ and bellow ( you can suggest a camera that is slightly higher than 1000$ USD). I don't need 4k either, 1080p is just fine. Thanks so much!

[@dslrvideoshooter]

I would suggest checking out the new Panasonic G85. I should have a review and guide out for it soon. Great camera! Also, you should consider shooting in 4k and downscaling... More on that in my upcoming guide as well.

[@ankur5238]

ok thanks so much

[@cheyaroslav]

Hello! Thank's for advise! I'm going to shoot a short movie in nature and need some additional information. Is this thing transmit signal if I shoot in 4k? I mean, transmitter will be pluged in operator's monitor (lilliput 4k) and receiver to director's monitor (also lilliput 4k) Sorry for poor English, i'm from Russia.

[@Mrdavis306]

Does it support 1080i ? I use black magic, it wants 1080i.