Omega 300 suppressor

[@racer14glr91]

I've had mine almost 1yr. Very happy with it. I've put five muzzle devices on different rifles. .223x2,300bo,.308,and 6.5cm

[@johnsimonelli9988]

Nice, I have almost two thousand rounds through mine and the only thing that I have done so far is chip away the carbon on the muzzle break. GOOD LUCK with yours!

[@breckfreeride]

Are the 556 and 308 muzzle devices different OD sizes? Does that also require a different size asr? Nevermind... Seems as long as you have the correct threat pitch for your barrel, they all fit the asr

[@racer14glr91]

@@breckfreeride the thread pitch of their barrels are different. So you need to get the right one for the barrel. The ASR mount is the same between all calibers.

[@johnsimonelli9988]

@@breckfreeride That is correct.

[@thomasrohloff3418]

I order one about a month ago can't wait wish I would of got the 36 so I could run it on my 325wsm

[@johnsimonelli9988]

Good luck with it. I have over 3000 rounds with mine and it performs flawlessly!!

[@BYGRACE80]

I have one and enjoy it a lot!

[@johnsimonelli9988]

Thanks for watching!

[@joejeans7913]

why do they not recommend .22LR? does it reduce recoil and flash too, such as muzzle brakes do?

[@johnsimonelli9988]

They say the lead builds up in the suppressor and creates a dangerous situation . They do have suppressors that are designed for .22 rimfire.

[@joejeans7913]

​@@johnsimonelli9988 This video really inspired me to get one, i have decided to get the omerga 36M and get the octane 45 for free special they have gong on. how do you clean it if its sealed and cannot take it apart? eventually would think need to clean it. right?

[@johnsimonelli9988]

@@joejeans7913 I have over 2500 rounds through mine and it is performing perfectly. I have been told the rifle rounds basically clean themselves every time you shoot.

[@seasawwoodworking]

How long is the can without the muzzle brake in the end?

[@johnsimonelli9988]

6 inches

[@joeg5414]

@@johnsimonelli9988 thank you. I saw the answer in a video I saw yesterday and have been searching for it again with no success. glad I read the comments

[@chazt4863]

I've read a lot of good reviews on the Omega 300! What kind of accuracy and groups are you getting at long range shooting? Thanks

[@johnsimonelli9988]

My experience has been excellent. I just shot a 3 inch group at 700 yards with my 6mm creed. My 7mm mag hunting rifle just shot a 1.35 inch group with Nosler Partition 175gr at 300 yards. My son who has very little shooting experience consistently hits 12 inch steel plate out at 500 yards and it really take the recoil out of the rifle.

[@chazt4863]

@@johnsimonelli9988 Thanks John, that may just be my next precision rifle can for a 6.5 PRC! I've been talking to Silencer Shop about the Omega 300 and the Dead Air, Nomad TI...still doing research and appreciate your valued experience. You've got a tack driver in that 6mm Creedmore - great shooting.

[@johnsimonelli9988]

@@chazt4863 Those are all good cans your looking at, my only regret is that I waited as long as I did. It took me seven months to finally get mine!

[@Capttainn]

Nice vid! One question I have is why did you choose the Omega 300 over the 36m? The guys at the shop were pushing me go with 36m but it seems like from the stats that the omega is quieter. I'm wondering why you chose this one? Thanks!

[@johnsimonelli9988]

When I purchased mine in 2017 I had it in mind to use it for hunting and long range bolt action rifles. I liked the fact that you can run the anchor brake or not. Also I can run the 30 cal flat end cap or the .223 end cap or anchor brake. As far as suppression goes I find atmospheric conditions, barrel length and caliber play a big roll in sound suppression. I hope that helps.

[@williesanford8394]

What is the rear mounting thread on the can?

[@johnsimonelli9988]

It can be whatever you want it to be, I have 1/2 x 28 and 5/8 x 24.

[@williesanford8394]

What is the tread on the baffle housing? Not the thread mounts that screw on to the gun.

[@johnsimonelli9988]

@@williesanford8394 No idea. I just leave it on because it reduces the recoil.

[@longshot5738]

How much do they run John?

[@johnsimonelli9988]

I purchased mine 3 years ago and I paid $879 and they sent me a free flash suppressor and a hat. The federal Stamp cost me $200

[@roncoleman4161]

How often do you clean it?

[@johnsimonelli9988]

Never, I have friends that have over 5000 rounds shot and they have yet to clean it. For me it would take years to get to 5000 rounds.

[@brysonw1815]

You don’t ever have to clean rifle cans

[@freddyflipped]

Dude!! Don't move.. their is a deer in your backyard!!

[@johnsimonelli9988]

LMFAO🤣