Omega 9k, 45k, or 300 on a Binary 300 Blackout… Overbore for multiple Calibers?

The decision is yours if you want shorter, lighter, less back pressure or quieter. and if you want a suppressor that will cover bigger calibers as well. Weights, measurements and hopefully the sound translates to you here on this video.
​⁠‪@williamboggs1682‬ requested this video and is a solid subscriber. Let me know what kind of video you want to see and I might be able to make one for you as well.
PWS MK109 MOD2-M upper has a three position adjustable gas block. Setting 1 for the most gas and unsuppressed. Setting 2 for a little less gas running lower back pressure suppressors or if running setting 3 suppressed and gun becomes sluggish. Setting 3 for general suppressor use.
SilencerCo SBR Lower receiver
Frankly Armory AR-C1 binary trigger
Expo Arms H3 buffer
Holosun 510C Elite green dot sight
Hogue Overmold stock
Magpul K2+ grip and Pro back up sights
Lancer smoke 300 blackout magazine
SilencerCo Omega 9K rated down to 8” barrel with supersonic 300 blackout 
SilencerCo Omega 45K rated down to 8” barrel with supersonic 300 blackout
SilencerCo Omega 300 rated down to 7” barrel with supersonic 300 blackout

[@jristight]

Thank you for creating the exact video I've been looking for and nobody else made. 👍

[@Richgunworks]

Really appreciate the in-depth videos, this helped a bunch in deciding what my first can was going to be. Keep on keepin on 🤟🏼

[@RangeToyz]

Thanks for watching and your good words 👊 I’ll try to keep these extended videos going if I can. Just got a DJI Osmo Pocket 3 and I’m recording in 4k and a DJI Mic 2 transmitter for better picture and sound than my IPhone SE. I’m investing into my channel more to help everyone out :)

[@RangeToyz]

Now is the perfect time to buy a can with the fast turnarounds. I’m excited to hear (no pun intended lol) which one you’re getting and for which host(s).

[@Richgunworks]

@@RangeToyz I went with the omega 9k for my mp5k build. Also plan to see how it works with my 300aac build but mainly it will live on my mp5k can’t wait for it to get out of nfa jail.

[@CarlosDangerTheThird]

Same here! I bought a Nomad 30 for my rattler due to our man here. Hours of research, reading and watch videos were all a giant waste. I just needed his, probably 5 minute, comparison

[@CarlosDangerTheThird]

@@RangeToyzyou are the man! Thanks for doing all you do

[@chasealthen4468]

Great video! thanks!!

[@RangeToyz]

Thanks, and thanks again for your comment and watching it!

[@frope01]

Right now I use a Hybrid 46M in short version on my 10.5 inch 300 Blackout with very good results. It inspired me to get the Lahar 30k. I'm presently waiting for the ATF to give the thumbs up.

[@RangeToyz]

Right on! You’ve got a thumbs up from me already. Good length on your Hybrid 46M to keep it shorter, lighter and still quiet. Low back pressure with the bore size or 30 caliber endcap to make it quieter. Hope you get the Lahar 30k soon. That tighter bore should make good decibel reduction for it’s length compared to the 46M in short configuration. One of my friends got the Lahar 30 and he’s stoked on it! I’ve got two Rugged Micro 30s. They have three baffles in full configuration, two in short configuration. I hope to get a video out soon of one and my new host. I’m not sure which length I’m sticking with yet, so that’ll help me decide. Looks like Aero packed three baffles into the 30k and it still has a decent blast chamber.

[@justintodd3305]

I have 2 lahar 30s and good god they do amazing . I have the L and the K . The L makes 300 blk super scary. Seriously I love their cans

[@DLXSKIFFMITCHELL]

Enjoyed the video and great info. Just got my omega 300 the other day now I’m going to order a psa jakl 8.5in barrel in 300 blackout.

[@RangeToyz]

Thanks! Congrats on getting yours! It’s fantastic for any 30 caliber with its length, weight and sound reduction. Nice price on the direct thread mount option now too. Did you get the complete kit with ASR mount like I did years ago? I’m currently waiting for my BOGO DTM. I have to share this one with my Ruger American Ranch 7.62x39 until then.

[@DLXSKIFFMITCHELL]

Yes I got the full kit as well. Just shot it on my AR 223 and it does bring the sound down quite a bit. I would imagine changing the end cap down to the 223 size would help even further.

[@RangeToyz]

@@DLXSKIFFMITCHELL nice! You’re right about the 223/5.56 endcap. I just put one on my Rugged Micro 30 in my last video and you can hear the difference. It adds some back pressure though. I’m searching for a heavier buffer for my A2 stock to help with that.

[@stinct1776]

Another great video. That's a great combo, MK109 Mod2 and Omega 300. Your suppressor looks a bit different from stock, did you change out the end cap?

[@RangeToyz]

Thanks! I bought and installed the 30 caliber Bravo Front Cap to make it shorter. I don’t really need the Bravo Anchor Brake on it for this 300 blackout medium cartridge. I think it’s quieter too having all of the gas directed forward instead of to the sides with the brake.

[@stinct1776]

@@RangeToyz looks nicer too! and no cycling issues when running subs with the MK109 and Omega 300, right?

[@RangeToyz]

@@stinct1776 thanks man! It runs fine after putting the heavier H3 buffer in it for the subsonic rounds. Are you going to get one or the combo?

[@stinct1776]

@@RangeToyz I knew the Omega 300 is rated highly for 300blk but I was concerned about the MK109 cycling issues. It looks like this combo is a win! So it sounds like H3 and carbine spring did the trick for you?

[@RangeToyz]

@@stinct1776 yes, H3 and Franklin Armory’s medium spring in here now. I think I had a carbine spring in it before I went with the binary trigger. The Omega 300 compliments it nicely with the right amount of back pressure. It’s shorter, lighter and quieter than the original discontinued SilencerCo Saker 7.62 that I had on it and my MK109 Pro as well.

[@joelsmith4690]

what spring do you have in the Buffer Tube with the H3? I have a mk109 mod1 and can't use anything past setting 1 and I use ULTRA LIGHT springCO spring in Yellow. with a H1 buffer weight. I have never been able to use my mk109 in setting 3.... I think their gas ports are not big enough in the barrel. I run it in setting 1 all the time... always suppressed. I run my mk109 with a Hydrogen S and also a Omega 36m.

[@RangeToyz]

I’m using the Franklin Armory medium spring that comes with the binary trigger. I forget how it compares to the standard spring that I built this lower with. I’ve never been able to use setting 3 on this gun on this gun for suppressor use either, same with the MK109 Pro I sold to upgrade to this.

[@joelsmith4690]

@@RangeToyz good to know. i tried a standard carbine spring in mine and it worked but not as good as the yellow springco which is lighter then a carbon spring.

[@juanthelawnmowerthief1641]

How about the Sythe on that PWS with supers and subs?

[@RangeToyz]

It should sound the same as an Omega 300. Of course the Sythe is lighter weight. I don’t think you’re supposed to get titanium above 800°, so it would be a lighter firing schedule, maybe 10 or 15 rounds a minute depending on your barrel length with supersonic ammo. I think subsonic ammo would probably be fine for a mag dump on this length barrel or longer as long as you let it cool for the next magazine.

[@williamboggs1682]

Thanks for this video

[@RangeToyz]

@@williamboggs1682 you’re most welcome! What do you think about the choices for your host(s), back pressure and sound difference?

[@williamboggs1682]

@@RangeToyzout of these personally I would go with the 45k for a setup like this I run a primal on my 300 blk with a flash hider end cap and I’m very happy with it I like the versatility of the 45 can and personally think they sound good and the fact they can run on a pistol is awesome

[@williamboggs1682]

Seems like the 45k just isn’t as popular as the 9 k and I would still pick the 45 k even if at the time of buying it didn’t have any 45s or plans to have any 45s but that’s just me

[@calebclark6739]

How’s that Pws upper run in 300 ?

[@RangeToyz]

It’s fantastic! I went with the H3 buffer because I was getting light strikes with the S&B subs.

[@calebclark6739]

@@RangeToyz I’d like to get one. The $1300 price tag has kept me from it.

[@RangeToyz]

@@calebclark6739 go to Optics Planet and use a 10% off code when they have one. That’s what I did :) I had the Pro model and sold it to help justify upgrading to this one.

[@RangeToyz]

Optics Planet has a 12% off code UPGRD right now that brings the Adams Arms P2 8” 300 blackout upper to 726. It’s a little shorter barrel and handguard, but I like short stroke pistons better.

[@calebclark6739]

@@RangeToyzThanks. Will that code work on the Pws ? Or you like the Adam’s better ?