One of The Biggest Mistakes That Harley Owners Make...

..Overlooking the Little Things that Can Make a Significant Improvement in Performance. A Tank Lift & Cooling Deflector Wings Can Cool Temps by Up to 25 F, And, Reduce Buffeting.
⬇️⬇️⬇️⬇️⬇️ Click Show More Below ⬇️⬇️⬇️⬇️⬇️
💥 LINK to Tank Lift Kits- www.dkcustomproducts.com/gas-t...
💥 LINK to Cooling Deflector Wings- www.dkcustomproducts.com/cooli...
➡️ VIDEO LINK on Improving Air Flow for Better Performance - • How To Get MORE AIR FL...
➡️ VIDEO SERIES on Why & How to Cool Down Your TC or M8 Engine - • Multi-Part Series on W...
💥 LINK to Written Report on Why & How to Cool Down Your Twin Cam and M8 Engine- www.dkcustomproducts.com/why-h...
🏍️ Thank you for tuning in! Be sure to Like / Comment / Subscribe
✅ Get Your DK Custom Products Here
www.dkcustomproducts.com/
🛒 Our Gear & Amazon
Check out our new Amazon page for the gear we use!
www.amazon.com/shop/dkcustomp...
➡️ SOCIAL MEDIA - CONNECT WITH US
/ dkcustomproducts
/ dkcustom1
/ dkcustom
/ dkcustom
📸 Our Camera Gear: www.amazon.com/shop/dkcustomp...
EMAIL: [e-mail]
The DK Team

[@briananabali9506]

Kevin more light is needed on cooling deflector wings installation, black on black made it difficult to see what was going on. Otherwise love your videos/products!

[@DKCustomProducts]

Sorry about the light issue! Glad you like the videos! Thanks for commenting. MB

[@benhelbing4184]

I really appreciate how much information and knowledge you put out in all the videos and products.

[@DKCustomProducts]

Glad that you are happy with the quality of the videos and our products! Thank you for your business and for commenting! MB

[@KVMerry]

“When in doubt go higher up” I have mid frame heat deflector wings, just for looks i think. Riding in mountains in Colorado, out of heat wave California, helped a little, but i sure miss the cool ocean. a hot 110b wherever i go

[@DKCustomProducts]

Remove the left side thigh protector. This will help the air flow very fast past the rear cylinder and out the left side...this is good for the engine, and will reduce the amount of felt hot air on the right side. Here is a two part written report on Why and How to cool down your Twin Cam and/or M8 that you may find useful - www.dkcustomproducts.com/why-how-to-cool-down-the-twin-cam-engine-part-i-dk-cl-tc-dn-1.htm Part II www.dkcustomproducts.com/why-how-to-cool-down-your-twin-cam-engine-part-ii-dk-cl-tc-dn-2.htm Here is a full play list on Why and How to cool down your Twin Cam and/or M8 that you may find useful/interesting - kzbin.info/aero/PLb3bvZgbH92_3s-2vv63QggFJ3nteFd_C Thank you for commenting! MB

[@Ridingon3TN]

I will say got the deluxe lift kit for my 19 triglide and not sure exactly what the oil temps were running prior but I do know my oil sits at around 190-224 degrees in the southern heat. I highly recommend the lift for anyone that has a trike hands down. I don't run the wings all I have on my trike is the tank lift and so far haven't seen excessive oil temps so far. not to mention the tank lift gives the bike a lot better look as well.

[@DKCustomProducts]

I am glad you like the look of the Tank Lift and are enjoying the benefits of having it installed, but I do believe that the lower temps you are getting are lowered engine temps. If your oil is running 190-224 that is great oil temps!!! Most trikes require an oil cooler to come close to those oil temps! Thank you for commenting! MB

[@jaykanngiesser3454]

Just ordered. Already have a filter relocation which mounted perfectly.

[@DKCustomProducts]

Glad you are well pleased with the parts you have ordered. Thank you for your business and for commenting! 👍 MB

[@craigkemmerzell5741]

HI 👋 Some of the guys I ride with take there lowers off in the summer for cooling They also noticed some of that buffering went away Good show 👍 😀

[@DKCustomProducts]

Yeah, and that is a really nice option on the bike prior to 2014. Since 2014 the bikes with lowers are twin cooled, with radiators in them, so they are not removeable anymore (without a whole lot of work and modifications). KP

[@johnsteen8892]

When I bought my 2015 FLRT a few years back it was un-ridable due to the heat on the right side. First thing I did was replace the god awful stock exhaust with a V&H system and a 1 1/2 inch deluxe tank lift. Made al the difference in the world. Tried the deflector wings and found them to be useless on a Free Wheeler. I also installed a Mustang seat (the stock seats are a terrible design, the seat pan sits directly on the frame with no cushion) and have not problem with fitting to the tank lift.

[@DKCustomProducts]

I am sorry that you seen no perceptible difference with the CDW's. They definitely do make a difference in cooling and buffeting if properly installed. If you were not seeing a difference in either they may have needed to be positioned differently. If ever you need help or feel that a product isn't working properly please feel free to contact us; [e-mail] 662-252-8828 Thank you for your business and for commenting! MB

[@ericroadking7564]

Good job guys!!

[@DKCustomProducts]

Thank you! Glad you like the video! MB

[@stewartsmall5695]

Could you guys do an oil cooler install with the relocation filter to the rear of a Tri Glide with over heating issues or a guide how to do it. I was thinking about buying a kit from y’all but I might need a little help.

[@DKCustomProducts]

Here is a video of an installation on a 2009 Triglide that you may find useful - kzbin.info/www/bejne/fZq8m56mj8aBj8k You can see the combo package at this link and you can look at the instructions if you scroll past the pictures and click on the instruction tabs - www.dkcustomproducts.com/oil-filter-relocation-oil-cooler-combo-pkg-for-harleytrikes-dk-ofr-dcoc-tri.htm If you need any help installing our customer service will gladly help you with any questions you might have. Feel free to contact us; [e-mail] 662-252-8828 Thanks for commenting! MB

[@rogergleidt1567]

I've got the 1.5" deluxe lift with CDW on my 23 Triglide. Works good. Very little buffeting. Is there a secret to getting that top nut on the tank? It was the most difficult task to the install.

[@DKCustomProducts]

Thank you for your business, it is appreciated. 👍 Glad you are enjoying the benefits of the Tank Lift and CDW. Easy way- With the tank lifted up off the back-bone, mount each bracket to tank ears with the threaded end of the bracket facing the backbone. Install 1 washer between tank ear and nut loosely on each side. That way, the hardest part is done without it being in such a cramped area. KP

[@wallywire]

Really like the tank lift. I see the dog bone spacers for front bolts. I didn’t see what you used to raise the back of the tank on the deluxe option for the rear of tank lift. Is 1/2” inch max lift for rear?

[@DKCustomProducts]

Yes, 1/2 inch is all we offer for the rear of the tank! You can see the Tank Lift at this link - www.dkcustomproducts.com/gas-tank-lift-kits-c4.htm You can see the rear Deluxe Option at this link - www.dkcustomproducts.com/deluxe-tank-lift-kit-option-c32.htm Please feel free to contact us with any questions; [e-mail] 662-252-8828 Thank you for commenting! MB

[@ut1004bp]

You guys eventally covered it, but it would be better to point out at the beginning to "verify you will have the approprate amount of clearance in the front before you select and order the lift size for your bike

[@DKCustomProducts]

We do specify that if asked and clearly with instructions on how to check for clearance, and in the description on the product page. Thanks for commenting! MB

[@Jim_Berry]

What is your opinion of the mid-frame heat deflectors Harley mounts to the frame above the rear cylinder? Do they only aid in felt heat or do they also aid to cool the rear cylinder?

[@DKCustomProducts]

This is a quote from a written report we've done on why and how to cool down your TC and M8; Remove the left side thigh protector. This will help the air flow very fast past the rear cylinder and out the left side...this is good for the engine, and will reduce the amount of felt hot air on the right side. With the right side shield still in place, it acts like an air scoop pulling air into the space behind the cylinder...but with the left side removed, that air can now exit easily. With both installed, they are essentially two scoops that push air from both sides to collide and swirl, with no real good place for the air to exit. It is not symmetrical looking, BUT, you can only see one side at a time, so it is unlikely most will notice you have a thigh protector on one side and not the other. Doing this will cool the engine overall, so while riding & when coming to a stop you have a cooler engine than you would otherwise. However, if you are at a stop long, or in continuous stop & go, you will feel more heat on the left than the right. You can see the full written report at this link - www.dkcustomproducts.com/why-how-to-cool-down-your-twin-cam-engine-part-ii-dk-cl-tc-dn-2.htm Also here is a video on 10 low to no cost ways to cool down your ride that you may find useful/interesting - kzbin.info/www/bejne/pWS3ZKx3bqd-rac Thank you for commenting! MB

[@TheRiverYeti]

Do the deflectors make much of a difference if you have a bike w/o a fairing (like a Softail Standard)?

[@DKCustomProducts]

The Cooling Deflector Wings take the air that would normally come over the top of the tank and around the sides of the tank and guides it to the engine. This results in a reduction of air hitting the rider and passenger chest, which reduces buffeting/helmet & glasses bobble with or without fairings. You can see more about them at this link - www.dkcustomproducts.com/catalogsearch/result/?q=cooling+deflector+wings Please feel free to contact us with any questions; [e-mail] 662-252-8828 Thank you for commenting! MB

[@RanGer-498]

Love my tank lift 👍

[@DKCustomProducts]

Glad you are well pleased with the tank lift! Thank you for your business and for commenting! MB

[@CP-bm9vs]

Will these fit the 2024 Road Glide?

[@DKCustomProducts]

As for the Tank Lift we have not test fitted the 2024 Road Glide as of yet. From everything I can see it will work with your 2024 Road Glide, but you can check for clearance to be sure before ordering which we ask that any person do that anyway. Checking for clearance not only allows you to insure fitment, it also allows you to see which size will look best with your bike. It is easy to check for clearance: 1. With bike on kickstand, take the bolt out of the front of your tank. 2. Loosen (do not remove) the bolt(s) at the rear of your tank. 3. Turn your handlebars all the way to the left and raise the tank up your desired lift height to check for clearance issues. 4. Turn your handlebars all the way to the right and raise the tank up your desired lift height to check for clearance issues. Be careful when lifting your tank, you do not want to hit against something (forks, handlebars, trees, blinkers, etc.) when checking for clearance. If you have any sort of Media tray or anything like that you will want to make sure that lifting the tank does not interfere with that as well. As for the cooling deflector wings a customer has bought a set for their 2024 Road Glide. Once I hear back from him I will let you know about fitment. Sorry for any delay. Please feel free to contact us with any questions or concerns; [e-mail] 662-252-8828 Thank you for commenting! 😎 MB

[@zavlo72]

Will the Cooling Deflector Wings fit a 2024 Street Glide?

[@DKCustomProducts]

That is not something that we have confirmed as of today, but if you will shoot our Customer Service an email I will do some research and find out for you. [e-mail] Thanks for commenting! 😎 MB

[@zavlo72]

@@DKCustomProducts I'll email. Thanks

[@DKCustomProducts]

No problem! I will get you an answer by Monday! Thank you for inquiring!

[@zavlo72]

@@DKCustomProducts Thanks keep the videos coming

[@DKCustomProducts]

Will do thank you for watching and commenting! MB

[@MRGS48]

And how do we fix a LO RNG with fresh battery on fob and bike and a full tank of gas?? A match stick🤣🤣 Please advise cause I can’t find ANY info on the matter anywhere…😥😥 It’s on a 2020 Road King Special. Thank you in advance

[@DKCustomProducts]

Does it say low range AND is your gas gauge off? Or does it say low range, but the gas gauge is showing full when the tank is full? KP

[@MRGS48]

@@DKCustomProducts fuel gauge shows what it’s in the tank cause I checked it, if it makes any sense. I rode the bike to a gas station filled it up then stopped at a different one to make a phone call and never heard from her since. When I hit the starter she turns but doesn’t fire up… when also turn the bike in engine light flashes for a few times then goes off. Thank you once again

[@DKCustomProducts]

I did not understand from your first comment that the bike would not start. First thing to do is check the engine codes. There is a vid on checking codes here- kzbin.info/www/bejne/Z6WQpnuGhthji5o Once you know what the code is, you can start going thru a process of elimination of what is causing the problem, with the code(s) pointing you in the correct direction. Generally it is going to be either spark, fuel or something to do with the ECM or BCM. KP

[@djcdj6106]

And now with the rear of the tank lifted all that rain water will have a chance to go in the front of the seat and underneath your ECU your battery and all your goodies will call that the short circuit lifted tank

[@DKCustomProducts]

Out of the millions of miles that have been put on Harley's using our Tank Lift/Deluxe Option/Cooling Deflector Wings, we have never had anyone have a problem with more water getting under their seat that normally does in OEM condition. IF there is something under the seat to short circuit (bad wiring) it will happen even without a Tank Lift. Here is a video you may find interesting about wiring- kzbin.info/www/bejne/bavPhoKGhKl_i6M Thanks for your comment. 👍😎👍 KP