Oscars Mustang Gets Lowered And Custom Wide Fender Flares!

In today's episode were lowering Oscar's Mustang down on new springs and struts, and then building custom widebody fender flares and installing the 2016 side skirt.
Thanks to maximummotorsports.com for the awesome struts, springs and camber plates.
Thanks www.nittotire.com/ for always supporting our builds with the best tires.
And thanks to gomobiletires.com/ for getting our tires on our wheels!
❱ Shop - bisforbuild.com/
❱ Patreon - www.patreon.com/user?u=3364742
❱ Facebook - / bisforbuild
❱ Instagram - / bisforbuild
❱ Twitch - / bisforbuild
Music:
Fareoh - Cloud Ten

[@HazaVSGames]

does anyone else think that these fender flares look terrible

[@therestorationshop]

Gonna wait and see where this goes but yeah, looks pretty bad. I was hoping they'd make a nice car not a hack.

[@toolzshed]

They are going to add a wide body kit

[@notologo]

Yes i do

[@davelangford2439]

@@toolzshed No their not, the flares are instead of a wide body kit.

[@davelangford2439]

@@therestorationshop It's their cars and are doing what they want to do, the whole point of this is to do something different and fun.

[@ruessrolloff2114]

I love the apocalypse car concept, but this just doesn't seem like the build for it. This car could be really nice and Oscar deserves a nice 'stang for all of the work you guys are putting into it.

[@ironmonkey1512]

yeah it does seem too nice, but it could look good with a patina finish

[@poeticlydead]

Chris can't seem to stick with a theme here.

[@unknowngringo]

Preach... Oscar deserves better

[@daniesalex7073]

I suggest they build an apocalypse car for now and then make it a real nice body swapped stang

[@andyhipe]

Hes just lowkey jealous that his mustang was taken away so hes ruining oscars car xd

[@matthewmachin5614]

Sorry just lost me with those arches😩

[@supernovaf1]

The front ones aren't as bad as the rear but both are no bueno.

[@AJKlos]

Really hope he sees that and changes it. You’re right the back is a lot worse than the front

[@pilsonandrew]

Agreed 🤢🤮

[@Not-Great-at-Gaming]

IMO, the example didn't look good either. Was hoping it would look better on this car, but not so much.

[@numberyellow]

Yeah, i was liking this until the wheels and arches.. the vintage wheels look better, and there are better-looking ways to do the arches... also, that side skirt....what the actual fuck? Also, there's like no room for the suspension to travel, so every time he hits a bump, his tires are going to be rubbing.. It WAS looking awesome, now i think it's just gonna look kinda nasty at the end. That all said, at the end of the day, It's Oscar's car...he's the only one who has to be happy with how it looks.

[@jonathanwells5119]

I have never seen anything more hack job than cutting down the hub spigot 😂

[@thirty3dev]

You don't live down Alabama boy, this is actually consider professional.

[@luckycordel]

@@thirty3dev Not in my shop! lol and yes I'm in Alabama!

[@drewmiller3462]

That grease cap is there for a reason..

[@thirty3dev]

@@luckycordel lol

[@jakob.k_design]

Even before he said how he would solve the wheel spacer issue, I thought it is gonna be the jankiest way possible.

[@TheMrbear186]

This was going in a half-decent direction until this episode, now it's hurting. Cutting those hubs was really stupid, dangerous and unnecessary. Come on man

[@jasong712]

It’s even worse now that they are running the stock wheels. There’s nothing to center the wheel anymore at least with the space there was

[@TheMrbear186]

I really love this channel but sometimes it's like.... Man what the actual fuck

[@firesculpturevideo]

he cut them down not off.

[@firesculpturevideo]

some of the people who watch this channel have zero knowledge of how to build a car.

[@TheMrbear186]

@@firesculpturevideo he literally said "cut these off" in the video and when they put the rotor back on you can plainly see there's none of it sticking through.

[@derrillbalshaw1199]

You've got to make the wide arches flow into the side skirts somehow, otherwise they just don't make sense or look right. You gotta rethink those flared arches and side skirts.

[@heckin_dinosaw]

That'd what I was thinking, especially on the front, they need to flow into the bottom of the fender to look right

[@docwyte]

That was some serious hackery on the hubs, even more so given you did it all for nothing. Also not a fan of the "flares"

[@electroncommerce]

Are those fender flares intended to be a joke? Poor Oscar, what a butcher job to a potentially super cool car.

[@Andres-wy5du]

Those fender flares suck and ruin the whole build

[@farnthboy]

Looks like something Jethro Clampett would do from the Beverley Hillbillies.

[@garrettkrieger6867]

Seems like a lot of Chris's ideas for being Oscar's car😂

[@Legendary____]

I feel like Oscar is gonna let him have it afterwards. He probably feels bad that his car was taken away.

[@Bruh-rc3ys]

Probably just feels likes that because Chris is mostly the one narrating but Im pretty sure a lot of Oscar's ideas are in there too.

[@OmarRodriguez1]

i feel like it's more collaborative ideas, then it just seems like it's mainly chris cause he narrates the vid

[@AlexMorales-ck7xf]

Probably because he’s the one funding it so Oscar doesn’t mind lol

[@derrickfuson2793]

Ya nothing wrong with that it will all be awesome

[@wallyhutjr]

those fender flares are tough to look at 🙃

[@OGMikey.]

Those wheel arches remind me of the cheap garden edging people use as a "fender flare"....

[@christuem2086]

Connect the flares to the sideskirt and make something on top of the flares to integrate it into the body.... car could look nice 🤷‍♂️

[@_DlME]

Exactly

[@jordangarneau8817]

Something ! The bottom of the fender, start of the sideskirt and the rocker all ending away from eachother is making it look rough .

[@scottrogers9542]

I love this project as I did the last project. I have to say though, I’m not digging the look of these over fenders.

[@eduardogarcia3049]

I had to laugh as they hammered the body panels on top of a box that says fragile. Lol

[@super_slo]

This is what I came to comment. 🤣

[@victorgallardo6679]

Lol apocalyptic mustang because of the “EL” wheels laying around 😂👽👾

[@victorgallardo6679]

One person never built car had to patented a name and hurt true car builders

[@thefakeraymond]

Same here, wonder what is or was in it lol

[@timwegman5776]

Victor Gallardo what does this comment mean I don’t understand?

[@Kylescaife]

You have my permission to copy anything you want 😘

[@TheCreateOutdoors]

I love your mustang wagon. It's so sick.

[@jeffreypetrellii7862]

What a horrible “copy” though...

[@akeemweaverwebster2762]

It’s like seeing a Horrible cringe fake Ferrari made from a Honda Accord

[@buenomini]

You don’t want to be associated with this. Your mustang is actually nice

[@JOHNNYFUTS]

I always hated those flares with a passion!

[@floodx4947]

Not feeling the flares. :-(

[@ray24051]

I say ditch the Apocalypse theme and make it a nice daily driver.

[@daniemarais3660]

Yes please

[@iceicebuddy]

Nobody asked for an apocalypse theme. It's kinda hard to look at.

[@boosted_3478]

The piece of garbage theme

[@GlorifiedGremlin]

Same I wasn't behind the apocalypse thing from the beginning

[@Ecosse57]

i accidentally took some improperly labeled medication and the poison control center said to induce vomiting. one look at those flares did the trick.

[@willmast119]

Last time I was this early you guys were building an elan.... oh never mind

[@Rose.Of.Hizaki]

Denice Halicki was _'invited'_ over. Punch was served.

[@Jenuin]

Shots fired LoL =]

[@matthiasmartin1975]

No, the Lotus he built was an Evora, not an Elan. But I do get it. It's just that I _have_ to sperg out, especially when i am tired.

[@mrgee4691]

Sketchy as AF. Total hack job. Forget apocalypse build, that is downright dangerous chopping down the hubs.

[@harryballzack]

Has anyone heard of suspension travel? Not much room between that fender and tire.

[@alfatasteless]

Glad I'm not the only one that noticed that

[@mrbgpati]

If you're new to the channel... they're putting a wide body kit on it, so the oem fenders will be cut

[@rendaddy_]

suspension travel is underrated, I don't know why so many prefer slamming over handling

[@sebastianeiselt37]

@@mrbgpati Well, well... If you mount the Flares in the Wheelarch, it doesnt really help... these are inpractical and looks terrible in my opinion :(

[@MWood95]

@@mrbgpati They cut the OEM fenders in this video and it still looks way too low to function.

[@93Proka]

The central hole is quite important because together with the screws it carries the weight of the car, and you cut off...

[@esercitatolorenzo]

the weight is carried by the camping force on the hub face. The centering collar does not carry the weight of the vehicle nor do the lug nuts/studs. Still pretty dumb to cut off the collars as they make sure the wheel is centered so you don't get any vibrations while driving

[@Pineapplxpress0]

Definitely a good choice going with the 2016 wheels instead of the lowriders lol.

[@raresvtsign4122]

All of that weight is now on the studs, I see a wheel flying off in your future

[@cortniesmith3138]

😆 “or cut this off” wait what? Why not have someone just turn them on a lathe to fit 🤷‍♂️ can’t tell me you guys don’t know someone who could do that

[@luckycordel]

I have to agree! Wheel studs are not meant to hold the weight of a car only to hold the wheel to the hub. The hub is what holds the weight!

[@bearnecessitits]

Literally the dumbest fucking thing I've seen this guy do. And I've seen him make a transmission case for a 200+ mph car active structure in a vehicle.

[@DoughboyPathyUSA]

Right? Or just buy some fucking hubcentric spacers. Literally $85 for their specific application from a number of sources, with a single google search

[@richardpugh3434]

Those fender thingies.....🙈 come on guys......

[@silviodante9975]

Lol at using a "little" spacer. Also, why are you lowering an apocalypse vehicle? If anything you'd want it lifted for more versatility.

[@TheCreateOutdoors]

Chris mentioned this in another video. He said apocalypse doesn't always mean "Mad Max", they were going for more cyberpunk-dystopian inspiration.

[@silviodante9975]

@@TheCreateOutdoors Thats not an apocalypse then. The literal definition of an apocalypse is an event involving destruction or damage on an awesome or catastrophic scale. Again, not something you'd wanting to be driving around your slammed, cobbled together mess of a car with wheels that are going to sheer off because you cut the hub rings off.

[@TheCreateOutdoors]

@@silviodante9975 okay, maybe that was a stretch then. Not all apocalypses are set in a run down desert. Maybe there are still roads and highways in this version. I get it's not conventional sure, but it's not impossible.

[@Nick17354]

@@TheCreateOutdoors Yeah, but then, those roads or highways would no longer be maintained. I think it was a good height for the theme before the springs. Lowered it doesn't make sense as a post apocalyptic build.

[@silviodante9975]

@@Nick17354 Exactly. Our roads are shit now when they're maintained, 2-3 years of no maintenance it would be destroyed

[@94sicivic46]

Love all the other builds except for these so far. They’re way off of the theme and seem like big hack jobs. Once the suspension travels those “fender flares” are toast. Cutting the hub is going to add to many loose lug nuts and ultimately a very unsafe car to drive. Their build and ideas but I’ve definitely expected more common sense from them 🤷🏼‍♂️.

[@mrwhite7222]

Not really since the adapters he bolted the existing hub has a hub as well. I agree that was so hack but It won’t be an issue

[@HarryCrackz]

Apocalypse builds are always underwhelming imo. The finished products look rushed and unfinished (by design), but you are left with a car you can't even drive on the road or enjoy.

[@me3333]

@@mrwhite7222 Since the original hubs were hub centric the spacers have no hub to index to and the lugs holding the spacers on can work loose and add to that the spacers extending the weight bearing point out causes more leverage on the hub itself calling for even more need for the hub center. Back in the 90's when everybody was putting wire wheels that stuck way out on their cars, some people I know had some real problems keeping the lugs tight so I bet it would be similar to that.

[@Nick17354]

@@mrwhite7222 Yes, but what is the adapter going to align to? It's going to vibrate like hell, not to mention safety. All of the shear force is now on the wheel studs, on a spindle that was designed to be hubcentric.

[@plus790]

Cut it off or use smaller brakes? Where was the "MAKE a wheel spacer" option???

[@super_slo]

I imagine that would have been the default if they had a lathe. But with all their friendly machine shops, it should have been dead simple... agree cutting the lip on the hub didn't seem the best option, but its done now, lol. I guess instead of spacers they can order new hubs... lol

[@BBogart1989]

Base model GT brake calipers are the same calipers Ecoboosts have anyways. So that wasnt gonna play out either way.

[@PedroM125]

Are you imagining the wheel wobble?

[@m98alissa]

@@BBogart1989 No, in 2015 the base ecoboost got smaller brakes than the base GT. The ecoboost performance package got the same brakes as the base GT while the GT performance package got brembo brakes.

@@super_slo Don't forget that they have a filming schedule. Surely if there was enough time Oscar would have used a lathe to modify the spacers. But losing a day of filming costs them a lot more than a new set of new hubs.

[@DaxxThorgard-bp6to]

I think that apocalypse cars are so underrated that seeing builds like this are so cool and inspiring to me

[@michaelcaraway2305]

After you finish making this an "apocalypse" car Oscar is going to make this a show car.

[@standardissuesteve]

"It has a really really good look..." NO IT DOESN'T!

[@justinbattson7649]

That's an opinion. You're opinion is that it looks bad but to Chris and Oscar it looks good, leave them be

[@standardissuesteve]

@@justinbattson7649 but that's the beauty of the internet, people are allowed to have opposing opinions. My opinion is that the flares are a mistake. Because the original guard is halfway across the tyre and only 1" above it, as soon as the suspension moves at all he'll destroy the guards, as there's no room for actual suspension travel.

[@JohnDoe-zr6bk]

"I don't feel bad copyin' it!" Thought he learned something about copying ....

[@johnpluskota6988]

As long as Oscar is over the moon happy with his build? That’s all that matters. I know I’m going to love the final design.

Love this Channel and enjoy all the project's, but for some reason this project hitting me hard in a bad way, know these are apocalyptic car's but dam, I would have loved to see Oscar's project the right way, this could have been amazing. Thanks for the hard work you all put in to keep us watching . From Zambia, yes in Africa.

[@MrRobschnieder]

Noooooo, use the "other" wheels from the "other" build lmao

[@blueyoshi9233]

They don’t have them, it was taken away :/

[@jamesarmstrong-jones5082]

@@blueyoshi9233 they literally had them on the car and then took them off

[@JohnMiller2]

@@jamesarmstrong-jones5082 When they took his other mustang they probably took the König wheels as well.

[@groundshakersociety6637]

Just saw an ad from omaze and they're giving away an Eleanor inspired mustang. Just putting that out there.

[@drewmiller3462]

Plus $20,000 cash. $100 gets you 1000 entries.

[@markbennett6658]

Lamster66 yes Vtuned is trolling him for sure!

[@TheMrbear186]

I saw that same ad and thought about b is for build but the ad I saw definitely said "officially licensed" conversion

[@kennetharreguin5720]

@@Lamster66 YOU SAID YOU DID SEND IT ON VTUNED COMENT SECTION 8HRS AGO!

[@djrose3]

Was so glad to get the notification for a new “B is for Build” episode! The Stang is looking good! Was unsure at the beginning, but I’m seeing where you are going! Can’t wait for more! 👍🏻👍🏻👍🏻

[@ianmurchie1567]

I like the look of this. I'm glad you decided to make it look more old school rather than new old. Your tying it all together nicely 😊🖒👊🍻

Whenever you say "Apocalypse" remember NOT to say "now". We don't want any trouble this time xD

[@danstray2527]

hahaha

[@duecedsol]

The HUB supports the wheel NOT the studs...cutting off the hub is definitely not safe fellas. Big brakes won’t mean anything when the studs shear and wheel falls off 🤦🏼‍♂️ Love the channel...figured you guys would know better!

[@jamesnicholls5760]

I think this should be a awesome build for oscar hes done so much on this channel. Deserves a NICE mustang

[@philtucker1224]

Now that you’ve decided to go back to the bigger wheels, please reorder some new hub centres to replace the ones that you sliced back. We love Oscar and we want him to live long and prosper (thank you).

[@antonczerwinske5910]

I think it is funny how much faster they build this second 60s mustang body swap

[@trapjohnson]

Well, they did all the learning the first time around. So, sorting out "Well, that was nice, but what if we just dropped the whole thing this time" can be quite the savings.

[@notonugroho504]

Me : apocalypse car Must be high ground clearance for off road conditions.. B is for built : lowering kit...

[@mohamedeid729]

This build is awesome cant wait to see it finished!!!!

[@MisfitMuttsGarage]

this is looking killer! can't wait to see the how this comes out.

[@stlfly1]

So you're really just going to leave the fenders as those strips? 🥺

[@youngtipz868]

Sorry chris I'm going with everyone else those flares look terrible it ruined the car for me

[@Braingear59]

Never saw this kind of build before. Great fun! Use to big production shows like Overhaulin and Search and Restore.

[@RobertBrownbrowncone]

Can't wait to see you guys having some fun with this righteous ride!

[@josecastro5503]

Dope man. Can’t wait to see it done

[@mikeoz6643]

I agree with the decision to rock the stock wheels, but those fender flares gotta go.

[@MrCrazedTV]

I love this build. Not sure why everyone is complaining. I love how you guys are doing thi nwith crap laying around in a driveway and having fun with it. Not every build needs to be a show piece. Some can be for fun. And honestly this looks dope anyway.

[@Notfast86]

With every progress video you guys at B is For build do I get the urge to start a project car, Thankyou guys 👍🏼

[@givemebackmyactionhorrormo6524]

Everyone: A-P-O-C-A-L-Y-P-S-E Car Chris: New Mustang build Oscar: I'ma get a car either way

[@JuanValentine]

In Mustang Kyles build those flares looked good because his wheels were super wide. You have stock wheels so those flares look fxckin terrible.

[@benjaminkamben4908]

Loving it! Keep going and I can't wait to see the final product.

[@theunpretentiousvegan8593]

B is for Build is pretty punk rock about everything. Not sure if that's a good thing, but it's worked so far.

[@gtd6288]

Shouldn't an Apocalypse Mustang be lifted, not lowered? I imagine the roads aren't so good in apocalypse land. I just don't get the theme here. Looks less "Mad Max" and more "Maxamillion goes to Vegas". Looks cool though. Also for wheels, some steel Cragar soft 8's would look sick on there.

[@weedydgaf7546]

Sorry bout this in advance, but that is not widebody.. i dont like it at all :/ every other choice is great, im berry happy with exept those widebody fenders, i mean widebody mud flaps

[@slavic982]

The fender flares look good as long as they are intergrated with the front valance and side skirts. I think it would look better painted. Looks like the build is coming along nicely.

[@craigcaggiano431]

Really cool how you and Oscar are blending 2016 with 1967 mustangs

[@brentspang9092]

You're going to have vibration issues now that the wheels are no longer hubcentric.

[@theroburrito]

Wouldn't it make more sense to cut the spacer and not the hub?

[@arevo8702]

Bro spacers suck

[@daszieher]

@@arevo8702 cutting the hub sucks more.

[@robgregorski2182]

I liked the way they where going untill the "wide body kit" but all of it can be undone to make it a clean cruiser, but dam that side skirt and flares...... not what I was expecting

[@JNerv]

yess I've been waiting for the next episode ✊🏼

[@racerx94]

Cutting the hub off..?

[@BigBrownie96]

Oscar is so talented, AMAZING

[@reubenbunter143]

I cannot express how much I love these videos

[@mwill76]

You made a good choice on the tires they are awesome. Also the build is looking good.

[@bernm5874]

When I saw the notification I clicked so fast!

[@thomasmaagaard]

Putting 2016 "wide body" on 60's body on 2016 chassis😂😂😂👌👌

[@mactipiak]

Mustangception

[@MrWigV25]

Ones again it’s a good vlog Congts Mr. Wig. Is here to.

[@jwiggs82]

Damn Maximum Mototrsports reached out to you guys? That’s impressive, they are THE premier Mustang modding company.

[@Saurion1]

Modern wheels are definitely a better fit. While I really like MustangKyle's widebody, I think you guys should rethink how you approach this. It's not looking anywhere near as good as Kyle's. Also the wheel wells are not big enough, that thing will rub like crazy.

[@xnadave]

"We kept the good brakes!" World: APPLAUSE!!

[@TimothyMoore]

I love that they are building this thing in the dirt. Don't know why but love it! 👍🏾

[@twinturbov8]

This looks great! I’ve got a base model 1967 Ford Mustang coupe as a project for me and my dad. It’s got a 170 horsepower inline-6 with a 3-speed automatic.

[@_DlME]

imo those wheels are hideous 🤢🤢 edit: just got to the part where they switched back. Thank god

[@Jenuin]

12:28 LoL so we cut the body panels off the new mustang to then cut the body off the old mustang to put over the chassis of the new mustang to then reinstall the new mustang panels creating one god awful mustang sandwich 🥪 mmmm 😋 LoL ( just making a joke ) Edit: Those gender flairs are yuck. But it is an apocalypse car soooo ? I would had old school Flared it but cut stretching and adding metal for a stock moulded look.

[@tayzer22]

One of the most awesome builds I've seen.

[@Not-Great-at-Gaming]

These apocalypse builds are MADness taken to the MAXimum.

[@daver.9971]

I must be pissy tonight, cause I'm on an unsubscribe to crappy KZbin content, look like a 10 year old built it

[@nathanjones5653]

Those over fenders are ugly, an melt down those “period correct” wheels. Whoever made those created a sin. 😂😂😂😂

[@JuPac420]

Those coil overs are beautiful 😍 great sponsor for providing those!

[@LoudGuitar14]

Big fan of the Koni Orange STR.T strut/shocks. I have those on my daily

[@mrray55]

Oscar is a savage fabricator. Great job so far.

[@mickffc3280]

Been waiting on this come out since last episode! Keep the videos coming!🙌

[@danstray2527]

I wish u guys spend a big episode and remake the "fender flares". I think its the most important job on this built, and i want to learn it=) (maybe slicing small pieces of sheetmetal and join them on the car to make the ark) I still love the build !

[@akeemweaverwebster2762]

The crazy part of this video is that Cris shows a wide body over fender that’s vastly superior than the crap that they put out. I believe in B is for Build and the guys that’s why I’m so heard on the channels I love. This is a suggestion on how you should go about your build on the mustang get much bigger wheels and much wider fenders go crazy with it

[@diavolo-o]

wow guys) its amazing) the best look i saw last time)

[@papel_pe]

What makes me really excited is the fact that he's cleaning his inventory of scrap parts... like he's making space for something bigger! I wanna see what he has in mind

[@scorpius31]

Great job guys!!!!

[@gtuttle4]

The old school wheels looks so much better! I sure hope you make it a fastback!

[@jimhartland1939]

Needs a set of mk 2 escort forest arches. They would flow with the skirts and are periodish with the style albeit a touch of euro styling that you boys appreciate

[@LunarOutlawsGarage]

Always look forward to your video updates man

[@mattr2773]

Looks great!

[@JNerv]

I'm so glad you guys are doing this again. I was SO upset to see the Eleanor go.

[@traxxasslash95]

Shhh we don't use that name around here

[@JNerv]

@@traxxasslash95 my apologies 😶😶😶