Over many years I have done a lot of decorating and I'm not to proud to say that having watched this I could have done it better if I had watched this sooner, great tips and well presented.
@ianmarywilliams3 жыл бұрын
Can't beat watching a Craftsman at work
@PaintingandDecorating3 жыл бұрын
Cheers mate
@alejandrohualdez55503 жыл бұрын
4.20 am and I'm literally watching paint dry.... And enjoying it!!! Strange times.
@PaintingandDecorating3 жыл бұрын
Sometimes the most simple things in life are the most satisfying.
@neiltownsend76314 жыл бұрын
Always enjoy watching, 38 years decorating and i am not too old to learn new tricks, expanding foam for one. I always use ready mixed paste for lining now, never a problem. It used to be solvite, then solvite with PVA, now tub paste. Keep up the good work.
@colliedogjoy4 жыл бұрын
Beautiful mate. I miss working! Love how you use a specialist glue for a loose bit, then just some paint later on - it's all about the crafty details. I learnt to cut out any bits of grit under the paper - had a terrible drop once that I had peeled off the wall and re-stuck - loads of grit. What a mess. Will try your hard stop mix. I always use the lightweight acrylic filler for almost everything these days - but it will flash on lining paper. I always do picture rails first because I struggle to cut that lowest edge of them cleanly otherwise! Wonder if anyone ever told you there's an ASMR quality to your vids.. very calming.
@PaintingandDecorating4 жыл бұрын
Thank you, glad you enjoyed it and people have mentioned the ASMR before.
@KENNY41067 ай бұрын
Very nice job mate, love the filling paint mix too nice one
@keithroberts42782 жыл бұрын
We have used the tips you mention in the video to correct some problems, great that the hints and tips work very well and helped us to sort out some very bad problems leaving a very good finished refurb. Many thanks for sharing.
@PaintingandDecorating2 жыл бұрын
Thank you glad we can help.
@mjolo3 жыл бұрын
Very useful video. I had a crap painter do my livingroom walls. Basically he didn't fill the gaps before doing a final coat. How many coats can the lining paper take, is there a limit? Thanks for your help
@nickevans70494 жыл бұрын
hi there another great vid... my lining paper already as filler between the joints but not a good job :( can i part the joints as you did and scrap out the old filler. then do as you did with hard stop ? thanks
@jordancarrasco33222 жыл бұрын
Great video guide and tips. Hope to be able to follow it through on my own project .
@PaintingandDecorating2 жыл бұрын
Thank you..
@jenblob10656 ай бұрын
Grt vid but does it make a difference about vertical or hoizontal hanging of lining paper if only painting it pls?
@richardpearson42484 жыл бұрын
Great video fantastic job stay safe 🇬🇧👍🏻
@PaintingandDecorating4 жыл бұрын
Thanks and you.
@HuwSarah2 жыл бұрын
Brilliant again - I'm going to tackle my first attempt at lining paper on my walls - Can you recommend quality scissors for me? Thanks again.
@PaintingandDecorating2 жыл бұрын
Thanks.. Dulux or Crown or your local decorating center... They will have some good scissors..
@tonybrown42982 жыл бұрын
Will the lining paper bubble after painting.
@shanekneeshaw34834 жыл бұрын
Used loads of you little tips to do my living room today ive really improved
@PaintingandDecorating4 жыл бұрын
Great stuff glad we have helped you.
@thedeewolf3 жыл бұрын
@@PaintingandDecorating At 38 I decided to change career paths and I'm now just finishing up my second yr 6707 diploma and your vids have been a great help...thx mate!!
@PaintingandDecorating3 жыл бұрын
@@thedeewolf thank you glad we could help.. plenty more videos to come..
@justme8649Ай бұрын
How about doing the colored filler first, do your cut in, and then paint the wall.
@davelowe19774 жыл бұрын
Wallpaper paste back in the 1980s wasn't that bad. I never used to have edges lift. For lining paper which is never likely to want removing if you do it properly, I add 10% PVA. I have far fewer problems with that mix.
@2010gtoner4 жыл бұрын
bingo. nobody ever mentions PVA when linning. great comment.
@alexthomson7465 Жыл бұрын
Do you add the Pva in to the paste when you are mixing it?
@WILLIAMHoLam3 жыл бұрын
Thank you, this is very useful! Quick question, I am moving to a flat which has painted lining paper and I am planning to repaint it with a different colour, is this video still applicable? Any preps I should do before hand? Thanks!
@PaintingandDecorating3 жыл бұрын
Wipe with damp cloth maybe a light sand .. and should be fine.. thanks
@WILLIAMHoLam3 жыл бұрын
@@PaintingandDecorating thank you ;)
@alexthomson74653 жыл бұрын
Love that filler mixed with paint tip!!
@PaintingandDecorating3 жыл бұрын
Thank you.
@stpainting54824 жыл бұрын
Hi mate, great video. I noticed you re use your scuttles and I’m wondering how you manage to get away with re using for each job without cleaning? Any tips here would be appreciated as I currently use liners but have tried to re use scuttles in the past and then after a few rooms the scuttles ends up peeling on me.
@LEK-we2hh3 жыл бұрын
How do you estimate job like that? Did you make / lose money?) Time and material ? 🤔
@franklyons34872 жыл бұрын
I always have half a dozen in the van. Wipe one out, allow to dry and use another that's dry. They fit one inside another so need only the shelf/floor space of one.
@MOPARdave9994 жыл бұрын
Help me out gents..... ASMR??? Top tips as usual. Haven't gotten around to the hard stop yet. Why do you not use a flat roller tray? First rate bruv. Best Dave
@PaintingandDecorating4 жыл бұрын
ASMR a feeling of well-being combined with a tingling sensation in the scalp and down the back of the neck, as experienced by some people in response to a specific gentle stimulus, often a particular sound. You can stand on a flat roller try and tip it up. Thanks.
@philhaynes29634 жыл бұрын
Scuttles are far better. Less chance of an accident and holds a lot more paint which avoids constantly topping up a paint tray.
@ascno19703 жыл бұрын
perfection as usual from you 👌👏👏
@PaintingandDecorating3 жыл бұрын
Thank you
@paulb83402 жыл бұрын
I had trouble sleeping ...real bad insomnia ..then i listened to this guy ....zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz!! boom
@spinx12004 жыл бұрын
Simplistic wee job carried out to perfection as always. great video mate. 👍🏻👍🏻 keep well. 👍🏻
@PaintingandDecorating4 жыл бұрын
Thanks.
@Hew.Jarsol7 ай бұрын
Hi. Wondering if/does the wall sweat behind this lining paper stuff as no airflow? Thanks.
@thehangingparsiple56924 ай бұрын
I know this is four years old now, but thank you. Great video. Painting my lining papered walls tomorrow with a lot more confidence now. ❤
@PaintingandDecorating4 ай бұрын
You're welcome 😁 thanks 👍
@marcusdurkie86964 жыл бұрын
Great vid again. Tried this technique for hiding joint lines. I can still see them prior to applying second coat of paint, is this normal? Or Will the next two coats of paint hide them?
@PaintingandDecorating4 жыл бұрын
Thanks. and no that is not normal hope you sort it.
@marcusdurkie86964 жыл бұрын
Not enough filler or too thin?
@PaintingandDecorating4 жыл бұрын
@@marcusdurkie8696 too thin maybe try giving them another fill. Thanks
@terrywalsh83553 жыл бұрын
I’ve made the mistake of hanging the paper horizontal then filling. It cracks when the room heats up. If you hang it vertically the joints butt up better. Cross lining for painting is really hanging the paper horizontal then hanging another layer of paper vertically.
@marcusdurkie86963 жыл бұрын
@@terrywalsh8355 But don’t you then have more paper joins that way?. If I hang horizontally only one join to deal with. If I was to hang vertically would have multiple joins?
@scottburnside7202 Жыл бұрын
Great video thanks
@PaintingandDecorating Жыл бұрын
thank you
@toria-j4 жыл бұрын
Is...is that woodchip on the wall that it's butting up against? 😯 (great job as always)
@PaintingandDecorating4 жыл бұрын
Yes, stripped one wall just for a demonstration. thanks.
@jackoconnor38122 жыл бұрын
Hi I love your videos, my dad taught me how to paint and he sadly passed away. I've taken over his company (one man band!) But the current job I am doing, the lining paper has blown and they don't have the budget to strip the paper and line it again...should I cut these bubbles out and then splay it off with filler? Thanks in advance
@jackoconnor38122 жыл бұрын
Also, would I have to seal the filler after?
@PaintingandDecorating2 жыл бұрын
@@jackoconnor3812 Thank you... Sometimes you can remove the bubble or blown area seal using B.I.N. primer then sand prime again if needed.. emulsion ... if visible use a hard stop filler (paint mixed with pollyfilla) light sand then emulsion.. thanks hope that helps
@jackoconnor38122 жыл бұрын
@@PaintingandDecorating thank you so much for the quick reply! I will let you know how I get on :)
@jackoconnor38122 жыл бұрын
Would you recommend the zinnser spray or should I get the 5 litre? I imagine you would recommend the 5 litre but I am trying to save money lol
@jackoconnor38122 жыл бұрын
Also please tell me which hard stop filler I should buy? Sorry for bombarding you with comments
@robmaule49514 жыл бұрын
Thanks for the great job. Can I ask a question? Do you let the hard stop dry + sand before the final coat or do you paint over it straight after applying?
@MIMI232 Жыл бұрын
Is it better to use lining paper or to get the wall replastered?
@fatimarizvi786 Жыл бұрын
Thanks for the detailed video! Very useful 👍🏼
@salim89833 жыл бұрын
Do you have to use thined coat on lining paper or can you just put the desired paint ?
@PaintingandDecorating3 жыл бұрын
Sometimes better to thin the first coat a little.. all depends on how thick your paint looks. thanks
@salim89833 жыл бұрын
@@PaintingandDecorating thank you, your videos has helped a lot with the tips you give. What I like most is how you explain each tip you give and why you recommend doing it, thanks again 👍
@nobbystyles48073 жыл бұрын
been asked to do a repaint on lining paper, can i get away with trade emulsion through an hvlp sprayer....? ive only put johnstones quick dry through it before which is pretty thick but i dont want to risk putting too much moisture onto the wall and having the paper bubble up.
@LiamVideos4 жыл бұрын
Great video, I just have a couple of questions. Why do you add water to the first coat and do you cut in again for the second coat of paint. Thanks.
@terrywalsh83553 жыл бұрын
You add water to the first coat because the paint soaks in to the new paper which sometimes causes an orange peel effect. Yes you cut it in on the second coat.
@LiamVideos3 жыл бұрын
@@terrywalsh8355 Thanks. 👍
@dalwindersingh23224 жыл бұрын
The filler mixed with paint tip is top!
@davidhalliwell11674 жыл бұрын
Just a quick question the paint in the filler is that to prevent flashing and does it work for soft sheen and silks aswell
@PaintingandDecorating4 жыл бұрын
Yes it works with all paints and yes helps stop flashing on the second coat. thanks
@davidhalliwell11674 жыл бұрын
Thanks for that iv been fine filling before painting so iv been putting 3 coats on walls to stop flashing great tip sir
@PaintingandDecorating4 жыл бұрын
@@davidhalliwell1167 your welcome thanks.
@Gollammeister3 жыл бұрын
Is that a mist coat your making for first coat?
@andrewmcgill1704 жыл бұрын
Hi mate dunno if this is cheeky or not but are u able to say what ballpark u priced this job in? Cheets
@colinharper37143 жыл бұрын
Some great advice thank you
@PaintingandDecorating3 жыл бұрын
Thanks.
@botany500kojak Жыл бұрын
What do you do if some of the paper overlaps? Cheers.
@denisconor6482 жыл бұрын
Great stuff.
@PaintingandDecorating2 жыл бұрын
Thank you
@Wired4Sound20074 жыл бұрын
Filler mixed with paint, well I never, have also been wanting a water base gloss to try so gonna try this one
@PaintingandDecorating4 жыл бұрын
Thanks only thing with water based is its not hard wearing.
@SylwesterZientara-n1d6 ай бұрын
Great lesson learned
@charliebaker58182 жыл бұрын
can you use vinyl silk on lining paper ?
@PaintingandDecorating2 жыл бұрын
Yes no problem... thanks
@kathywhitaker114 жыл бұрын
My go to lining paper is always 1200 grade as opposed to your 1000 sir! I always line vertically when I’m painting it and I find the joints never split! Also lining vertically avoids the paint sitting on any dodgy joints and opening them up if you’ve lined horizontally.Works for me.
@PaintingandDecorating4 жыл бұрын
I change the grade depending on how smooth the wall is. I had a roll of 1000 grade so I used that. Possibly would of used 1200 on this wall if it was not lock down.
@kathywhitaker114 жыл бұрын
Absolutely my friend! Getting materials just now is a nightmare! I waited 10 days for a home delivery of 5lts of varnish!
@stephenevans18334 жыл бұрын
Absolutely . 37 years as a apprentice trained dec, and never once had to fill any joints after lining . 1200 grade is my choice too. Anything thicker starts getting like ‘cardboard ‘. Also, I find vertical hanging best, regardless of what I was taught at tech !!. Everyone has there own technique .
@abdeenmomeen60383 жыл бұрын
Good job bro
@PaintingandDecorating3 жыл бұрын
Thanks
@noseyfuker4 жыл бұрын
Perfect as normal
@darrenwilliams77413 жыл бұрын
My house is old from 1930s the plaster has lost of hairline cracks to many to rack out and fill I've had to rooms reskimed so far but it's expensive so instead of reskim would it be better and cheaper to use lining paper?.
@staffh38152 жыл бұрын
Should never skim over old plaster that is full of hairline cracks ,tap the wall with your knuckle if it sounds hollow you should knock back to bare brick and replasterboard ,at a push to save money you should try wall rock fibre liner a little more expense than lining paper but very strong but like any decorating it's only as good as your prep social and sand a couple of times first then pva
@jasoncowell10012 жыл бұрын
I’ve don a first coat and had one bit that had a slight crack in joint , did the hard stop with paint , let it dry , gave a slight rub down , then painted my second coat , but now I’ve got more joint cracks appearing, what am I doing wrong … thanks in advance
@PaintingandDecorating2 жыл бұрын
With cold walls it takes longer for things to dry... if you don't allow each step to dry fully then cracks appear. Thanks
@jasoncowell10012 жыл бұрын
@@PaintingandDecorating thanks , I had let things dry , but I still get the problem , is border adhesive stronger than wall paper adhesive.
@StephenSmith-vs8hr4 жыл бұрын
PLEASE CAN YOU TELL ME WHAT ROLLER SLEEVE YOU ARE USING THANKS 👍😁
@antoniosantos84244 жыл бұрын
I wall ask you about this issues. firso of all sorry about my English, i´m Antonio form Portugal. I have some walls (drywall) with liningpaper. I have paint the first wall and after painting appears bubbles , just after painting. Is this normal ? will disappear after drying ?.....?!?!, thanks
@NoneOfYourBusiness9613 жыл бұрын
Question..If you apply the paste to the paper. Will that cause it too expand on the wall and overlap as it weren't pasted enough in the first instance? Thanks
@PaintingandDecorating3 жыл бұрын
Sounds like you have not read your instructions.. I had taken it for granted you had allowed it to soak... that being you have used normal lining paper... some lining papers need time to soak... higher the grade longer the soak.
@NoneOfYourBusiness9613 жыл бұрын
@@PaintingandDecorating I used 1700 grade, And allowed to soak between 8 and 10 minutes. As you mentioned, I belived i had some overlapps due to the wall not being flat at as you mentioned. If i get dry areas and paste whilst on the wall, could it cause the seam to overlapp?
@swampy12342 жыл бұрын
what if the underlying wallpaper has crakcs in it?
@pordie18833 жыл бұрын
Is it possible just to leave a 1-2 mil gap on purpose and fill and sand it before/during painting ?
@pumpkinhead4563 жыл бұрын
Absolutely! Common practice :)
@goonzjav2 жыл бұрын
Wouldnt a thin skim coat have been better on that wall with so many imperfections and not being flat? I suppose its what the customer wanted?
@antonygilbey80684 жыл бұрын
Noticed that you used Leyland paint is it a good paint because there are lots of mixed reviews !
@PaintingandDecorating4 жыл бұрын
It's okay for light traffic areas not a bad paint at all. Thanks
@ka52692 жыл бұрын
how much cheaper is it to reline rather reskim walls?
@PaintingandDecorating2 жыл бұрын
Not the same thing at all.. thanks
@scott35894 жыл бұрын
where abouts do you operate?
@rdprdp51803 жыл бұрын
Can pva be used as substitute for border adhesive
@PaintingandDecorating3 жыл бұрын
You can at a push.... hard to work with... better to use border adhesive. Thanks
@darrenhirst61632 жыл бұрын
Bit late to see this video, but u do it totally different to me,cross linning doesn't hide the seams,and them lifting shunt be happening,once walls are fully prepped size the walls leave to dry,drop hang the paper like normal finish paper using ready mixed glue no seam lift at all,leave 2mm gap in seams leave paper to dry,paint walls in white ,like a mist coat,fill 2mm gap in seams then sand,paint white over sandeď filler, walls done perfectly and ready for top coats in the chosen colour
@lg3494 Жыл бұрын
i've had an absolute nightmare with decorators i've ended up using your videos to try and salvage and fix their work off of your videos. I'm in liverpool if you ever fancy helping i will pay all costs to come haha.
@garvielloken3929 Жыл бұрын
😎
@davecharlesworth81764 жыл бұрын
I will use the filler tip for sure 👍
@philipelliott79664 жыл бұрын
Don’t understand why you haven’t prepared all your woodwork before anything else?
@PaintingandDecorating4 жыл бұрын
The wood work has been prepared on other videos before this.
@irkasz2 жыл бұрын
If you are based in Manchester can I hire you please
@PaintingandDecorating2 жыл бұрын
Really sorry our customer base is too large.. thanks for asking hope you find someone good.
@stephenwilliams18244 жыл бұрын
You don't have an apprentice working with you?
@bitTorrenter3 жыл бұрын
40 mins long! 😳
@robbysteele4 жыл бұрын
thanks for the filler tip.
@mdrirasedrased27082 жыл бұрын
Thanks
@acropolisnow94664 жыл бұрын
Poxy lifting edges, nothing more irritating.
@franklyons34872 жыл бұрын
I've seen many slow painters in my time but this man is the slowest. So much time spent on cutting in and so much excessive and unnecessary brushwork and roller useage. How long did that first wall take to cut in and Roll? 'd not like to pay him on T and M.
@barrysmith54663 жыл бұрын
What a bodger,obviously not enough paste on the edges of the lining paper,it would of been helpful to use a roller on the joints but then peels back an unstuck joint and then sticks it back down with emulsion paint,if this is the work of a so called time served qualified painter he needs to seek further training.
@PaintingandDecorating3 жыл бұрын
Lol. You've not done enough work with real tradesmen.
@PaintingandDecorating3 жыл бұрын
I would be surprised if you've even been to college.. your comments are getting more hilarious.
@barrysmith54663 жыл бұрын
@@PaintingandDecorating 5year apprenticeship served gaining city and guilds basic and advanced certificates,specialist finishing training including marbling and graining,I think gives me enough experience to comment on the standard of your work.
@PaintingandDecorating3 жыл бұрын
@@barrysmith5466 so you seam to be a little behind me... a lot to learn.
@PaintingandDecorating3 жыл бұрын
@@barrysmith5466 interesting to see you say 5 years... because the rest of us do 3 years... may be your not from the UK.. which explains a lot.