Yamaha R6 Engine Rebuild Part 1: Bottom End to Piston Install | Partzilla.com

[@REPSOLHONDARR]

this guy is my hero where can i get his signature from

[@sandyroadking]

Damm Man.. The level of expertise you have... OMG level. You seem to know every little detail of the little details. And the tools used are perfect.

[@PartzillaParts]

With age comes experience. Thanks for watching!

[@sandyroadking]

Partzilla . Thanks to you for making these awesome videos. 😀👌👍

[@mareksumguy1887]

Yeah... real "expert". I like the way you used so much engine oil on the head stud threads... so that it leaked into the coolant cavity!. So now you have oil in the cooling system. Very unprofessional. Also... you didn't even show the viewers how to properly install a bearing so as to not damage it.

[@Eglehalo4]

@@mareksumguy1887 that’s what the manual calls for go bitch at Yamaha

[@mareksumguy1887]

@@Eglehalo4 no it doesn’t!

[@BradleyHughes-u9w]

I’m debating buying the motor from an 07 r6 for $350 but from what he said it needs a full rebuild and didn’t say why but in the last video you pretty much named all the things to look for and I found it very helpful. I rebuild a few sbf motors but from what I’ve seen these are just as easy to work on.

[@succafool9]

I don't even own one of these and I'm mesmerized. Very cool tutorial

[@xXCigarXx]

Your first video I watched about this earned you a subscription from me. Pretty awesome information here for people.

[@riv1950]

Very interesting video, great camera too.Thank you.

[@MegaJesus114]

This is very useful! Will you be making an update video on the engine running?

[@kaja9917]

Hammering bearings, make sure you hit the frame, not the middle. Just for info

[@sharkbaitsurfer]

Exceptionally well done

[@celine3530]

Hopefully you can rebuild a complete engine such in electrical(starting system, charging system, cooling system) for honda cbr400rr nc23 or nc29 as for your next job, thank you so much in advance

[@marcosepe9956]

Factory Manual will guide you through the process as well some experience.. Love the 400rr's

[@celine3530]

@@marcosepe9956 I DONT HAVE IT

[@ChrisIrving-f7k]

Straight nice work. Very hard to find a good shop these days🎁⚓️💕💕💕

[@ridersouhailmoroccan9381]

hi I am new here this is beautiful work thank you so much good luck 🙏👍✌🌷

[@hellraiser2310]

Awesome John, thank you brother

[@guzforce]

You just got a new Subscribed and fan! Great tech, clean and organized video! Awesome! Thank you!

[@kyleburkett5864]

Definitely think it would be cool to see even a few minutes of the engine running and talking through first time start up, break in, first oil change, etc

[@jeovanijackson]

Cool video. Do one for a GSX-R 😎

[@bugaboo55411]

Are you guys ever going to do a rebuild on a crossplane Yamaha R1 09-14 ? Nobody has made a detailed video like you guys did with the R6 which is super cool.

[@kennethjanczak4900]

great video, good explanation....thanks for upload and sharring

[@don1765]

Thank you sir for those amazon videos!

[@marcosepe9956]

The O-rings you're placing on the Nozzles "5EB-15155-00-00" are they OEM and are the OEM material Fluorocarbon (Viton)? If someone does not have access to OEM Viton O-rings would be best for that application in my opinion, what are your thoughts? Excellent tutelage on an complex engine rebuild you've demystified many topics in this video. Thank you.

[@PartzillaParts]

Glad we could help. We put a lot of time into our engine build series.

[@emilioplays1852]

Y’all need way more subscribers john! Awesome work. I have the engine pulled from my 07 r6 and would love to have it rebuilt like the. Where is partzilla located ??

[@PartzillaParts]

We have distribution centers in GA and NV. Thanks for watching!

[@Kyre5049]

This is amazing. Have a question what is the process of the pulse ignition generator cover is stuck on a 1998 and has never been replaced or removed? Three clutch cover bolts were over tightened previous owner and put holes in the crankcase. What would you recommend for this? JB weld?

[@JoaoPauloMMachado]

Uma pena não está em português a tradução 😢😢 excelente vídeo o melhor sobre a montagem do motor da r6

[@eduardopaiva7161]

very good your video if possible do more here and in Brazil

[@Muvikone]

best of the best video!

[@crazee6821]

Great video !!

[@dirkhoek3581]

Why didn’t you cool the bearings down? Or heat up the block? I’ve always learnt that you destroy the bearing by hitting them in this way.. I could be wrong, it’s not to put you down. You’re doing a amazing job😉

[@mikerieck306]

Or.....do both.....heat and cool. The actual process for setting the bearings is OK.....I have done it thousand times.. Real trick is how to remove the shift shaft needle bearings. Yamaha set them in blind holes with no way to "punch them out." I have modified 2 of these R6 cases to allow a punch in there. Yamaha manuals suck....I have an 87 FJ1200 that is a beast with just under 160 RWHP and I can tell you from experience. F'ing Yamaha.....the king of nightmares.😉😆

[@SystemAdministrator1]

Partzilla is awesome!

[@nathangresell1534]

What kind of bracket/mount did you use to mount that engine to that engine stand? I need something like that for a cbr600 engine

[@benfranklin4111]

Awesome video subscribed and belled

[@LMCtubokuChannel]

Nice.. good work 😀😀

[@fernandoaredes1854]

Excelente!

[@gregorytimmons4777]

So this engine was nicasil plated by the machine shop that bored it? I have seen a plasma metal spray buildup on a bearing fit on a shaft. I'd be very interested in watching that process.

[@888jannn]

Nice job...👏👏👏💥💥💥🚀🚀🚀

[@alejandrogrisales7151]

Ingeniero una consulta...estos motores se pueden rectificar los cilindros a diferentes medidas de acuerdo al desgaste de su vida útil?...lo que conocemos como al 25 - 50 - 75 o estos motores es remplazar el bloque de cilindros a standar como única medida? Gracias

[@waeaaghazale6813]

Thank you

[@alejandrogrisales7151]

Ingeniero una consulta este tipo de motor permite rectificar los cilindros para varias reparaciones o es de única reparación standar y se debe comprar el bloque completo de cilindros? O estos se pueden remover en prensa hidráulica? Gracias

[@jimchris2272]

Do the R1 engine rebuild please 🙏

[@Dirtyol12valve]

Almost identical to this.

[@IsraelSocial]

Thanks for the video

[@tellerx5487]

Where I can find a service manual who saw you all the specs torque?for yamaha r6 2007 I'm gonna fix my engine but I can't find a trust service manual..

[@subhashchandradey2118]

thanks sir ☺

[@samuelmotos7868]

good night i'm having trouble knowing about a 2009 r6 connecting rod mine is code 2c0 and i got a 13s know how to tell me what the difference is

[@atmatm1800]

sir make full engine video on baneli 600

[@alejandrogrisales7151]

Ingeniero saludos, por favor su ayuda con información respecto a como se reparan los cilindros he escuchado que es un proceso químico nikasil pero entonces estos no se rectifican y pues según se aprecia tampoco se emcamisa o reemplazan los cilindros? En páginas de internet donde venden los repuestos nunca se ve esta pieza para venta pero el resto si? Gracias

[@alejandrogrisales7151]

Ingeniero enséñame al respecto de la pregunta, gracias

[@lukeivanov2327]

Does this tutorial work on a GXR600?

[@2245894]

I have a 2007 yamaha fz6. I know the r6 and fz6 have the same engine so would this kit work on my fz6?

[@Theguiltysoulswillpay4889]

Hi sir I really hope I get a response...... I am in need of a gsxr 1000 engine to buy second hand or brand new but I dont know where to get one . Can you recommend me to a site or even if you might have the connection to hook me up

[@user-hu2pp9ic9t]

Awesome!!!!

[@636_speed_shop]

Where do you find that engine stand or do you have video on it??

[@officiallydave4290]

Do these parts work if rebuilding an 06 R6 non S

[@LinkolnLTU]

what torque needed for head studa ?

[@masonparria9422]

We rebuilt the motor but the push rods are not moving the rocker arms it is an 2005 Honda rancher

[@Gresini]

Does anyone uses ceramic bearings inside the engine? Any advantages?

[@williansraiders6682]

buen dato técnico éxitos ok . espero ser buenos amigos gracias

[@matthewpudlo5830]

When I click the link in the description for “the parts you need” it just takes me to a general parts search on the website it doesn’t have a list of the needed parts...

[@LeeePowers]

Same.

[@mohabahmed1257]

Sir can I ask from where u can get motorcycle genuine parts engine parts for old models like 1988 motorcycle?

[@PartzillaParts]

If the manufacturer still makes them, you can get them on www.partzilla.com!

[@lorenzogarcia9890]

R1 engine rebuid please

[@adriansy365]

Hi sir, i got a question about engine rebuild cause i got no idea. How do i know when i need a rebuild??? I got 2007cbr1000rr and its got 32,000km when i purchase it 😁😊

[@PartzillaParts]

Blowing smoke, loss of oil, loss of power, rattling...there are many subtle hints, but if you have a problem that requires you going into the bottom end to fix it, then it's time to rebuild.

[@adriansy365]

@@PartzillaParts thank you very much sir, now i got some idea 😁😁😁

[@amorfati4111]

Sir Hope you're doing well. Are rebuilt engines reliable ? Just bought a 600 K7, and a friend of mine who got a bit more expertise told me my bike is a lemon since the engine is rebuilt. I really like my bike but I am afraid I am going to have issues in the near future... ( Btw feel free to check my channel for a flyby) greetings from Morocco

[@assanieprojetefroidsanai]

😊😊😊😊😊

[@pleasesubscribejumperrza4615]

Please rebuild a GSXR 600 K7 engine!!!

[@PartzillaParts]

We'll add it to the list!

[@pleasesubscribejumperrza4615]

@@PartzillaParts thank you... Alot of people is looking for this, and it's nowhere to be found on KZbin

[@diegocalcagno1382]

Hola me encanta tu canal y hoy quiero pedirte ayuda desde Argentina , quiero hacer un escape a medida de mi r6 y necesito datos que no encuentro y tal ves me puedas ayudarme, AAA avance apertura admisión , AAE, RCA, RCE, También necesito el ancho de válvulas de escape y el largo del recorrido de escape desde la valvula asta la salida de la culata también el ancho del conducto de escape , desde ya muchas gracias Saludos

[@rubberbandfreak]

whats the music in the end called?

[@danielhunsche2010]

those t30 bolts are never coming off again haha omg

[@theloco2061]

gracia por el video por que pocos hacen esto

[@Vizr]

Do the 2006 and 2008 motors differ from each other?

[@PartzillaParts]

They updated a lot on the 2008

[@themuffinman8871]

where did u buy that fly wheel puller? (brand?) . thanks

[@PartzillaParts]

You can get special tools on Partzilla.com. www.partzilla.com/product/yamaha/90890-06721-00 www.partzilla.com/product/yamaha/90890-06723-00

[@arififtianto8465]

I can do this all day long..

[@zanehopefz6hundred761]

Hi guys. I need to rebuild My 2006 Yamaha FZ6 Engine and Transmission. Do you guys know where I can buy everything? I need and would like Aftermarket Over Size Oil Pump, Water Pump. Pistons, crank, cams, every single sensor for all pressure stuff and what not. Also, all of the gears for my gear box. And all pressure wires and sensors, and what not. So pretty much a FULLY REBUILD kit for both my Engine and Transmission. Haha..

[@PartzillaParts]

You can get all the OEM parts from Partzilla.com. Aftermarket is going to vary depending on the part. Aftermarket companies have different specialties. It will take a good amount of research. It's going to be a heck of a project!

[@georgemaxwell5807]

No torque specs?

[@needmorecoyotecontrol7518]

Where can I find the parts list for an 02 model r6?

[@PartzillaParts]

www.partzilla.com/catalog/yamaha/motorcycle/2002/yzfr6-yzfr6p

[@letsdoit6845]

how much does it cost to rebuild the engine of the 2006 Yamaha R6

[@chrisburnsed6349]

A basic rebuild to the extent done in this video and dyno tuned from our shop would be in the 3 to 4k range. Our pro stock drag bike engines start at 14k and up.

[@milez2787]

Good job id love to be that clean with it .just ruff buying tools !!!!

[@chrisstevens3801]

Ah man that parts list link is broken... anyone have one that works? And knows the cost of all the parts?

[@PartzillaParts]

Thanks for telling us, we will try to fix the link.

[@robertirom6]

is the cylinder kit new

[@PartzillaParts]

Yes, cylinders were new and upgraded size.

[@brucekirk5386]

You a mechanic and ain't gots a hammer...you ain'ts a mechanic

[@melinda7961]

I like it

[@Muhammadshahzad-jg3tr]

r6 2006 ful engine price

[@samusaran5509]

where can i get a engine stand for my 03 R6

[@PartzillaParts]

We had to fab something.

[@samusaran5509]

@@PartzillaParts ya'll in the business of selling those mounts?

[@ksmotorsports2296]

is putting the transmission together the same method/way for a 2005 Yamaha r6

[@PartzillaParts]

It will be similar, but because they are different generation motors, it will be a little different.

[@thekidd2189]

Make me wanna try a rebuild but I'm intimidated by the work

[@PartzillaParts]

Just take it one step at a time!

[@gregorytimmons4777]

However, just one mistake can spell doom. That is why i have always read a lot of articles in magazines and now watch engine building videos online. It's cool because many times you learn effective performance strategies so you learn how to "build" a hot engine and hopefully have learned assembly procedures from this and other videos and literature.

[@nnajioforemmanel6117]

hi guys i am rebuilding my cbr1000rr 2008 bottom end with a damaged connecting rod but the issue is i need to replace the connecting but there is a number written on my connecting rod B2 CAN I REPLACE WITH A2 CONNECTING ROD

[@PartzillaParts]

No, they are labeled so they match the crank. Letters are the inner diameter of the rod and numbers are the outer diameter of the crank. Then colors for the bearings. There should be a code on the outside of the crank pin showing the sequence.

[@chrisburnsed6349]

Of course this is for basic rebuilds on stock components. With our race engines where every part is lightened , matched and machined all those letters , numbers , and colors don’t mean shit. This is when you need the proper measuring tools to check clearances.

[@victorsuazo2567]

Me gustaría que fuera en español

[@crazyviews354]

Do your miles go down to zero after a rebuild ??? Or would i need a brand new engine for that 😂 probably a stupid ? But it would be amazing lol

[@PartzillaParts]

Normally, unless you get a new tach, you would note what mileage the engine was rebuilt. Then you have documentation on how many miles are on the chassis and how many miles are on the new motor.

[@jacksonmez9604]

Hello sirr i can not mail you why server not found says it. I need parts for my cbr 1000 thank you

[@PartzillaParts]

www.partzilla.com/catalog/honda/motorcycle

[@d.c7464]

The open deck design must limit the durability of the engine.

[@ZeroBoostBuick]

The 2008-2018 R6 motors are very strong and last a very long time. Looks can be deceiving. And remember you're not gonna get much more than 135 WHP out of these anyways. Out of all the bikes I crashed at the race tracks, the R6 is the toughest when it comes to limiting damage during a crash. Only the forks are the weak link and tend to bend during a serious crash.

[@mareksumguy1887]

D. C And why would you say that?? You don't think Yamaha thoroughly tested this design out before putting it into production?! Im sure Yamaha know better than you buddy.

[@atmatm1800]

and subtitle in hindi

[@Syias-o1f]

Dose all of these step also apply to a 2012 r6