WOODWORKING - Building an Oak Cabinet with a Sliding Tambour Door

Want to know more about how I built this piece? Check out my Patreon Page - / pedullastudio
Follow along as I build this Black Stained Oak and Brass Record Cabinet which features a Sliding Wooden Tambour Door, Brass Grilles, and a Push to Open Sliding Bi-Fold Door, all designed to stylishly house my clients record player as well as a large collection of records. Other equipment such as the amplifier sit behind the brass grilles. (Please note the crappy record player shown is not my clients, its just the one I have in my workshop)
It’s important to understand that when building a piece as detailed and precise as this you must allow the wood to acclimate properly to your shop as well as let it adjust to its new state after the milling process.
I never show the extensive milling process I go through but each board is gradually taken down to it’s final size in a series of stages, allowing the boards to rest in between. In particular, the slats for the Tambour door, which have been milled repeatedly over a week and a half, gradually bringing them down to the finished size. This process allows as much movement as possible to escape before assembly.
The Tambour Door uses a canvas glued to the back of the wooden slats. I’ve used contact glue to do this which can have its problems if not done correctly. Please note not all contact glues are the same. I only ever use industrial grade contact glue sourced from my suppliers. I never use glue from general hardware stores, from my experience it doesn’t hold up as well. I would not use PVA as this will introduce moisture back into your wooden slats.
When I originally designed the Tambour door I hand carved a handle into one of the wooden slats (shown in parts of the video). Once everything was assembled I decided I didn’t like the style of handle and cut it off, then replaced it with a smaller handle which has been rebated into the slats.
The Push to Open Sliding Bi-Fold Door. Seems simple enough right? But there is a lot more going on here than meets the eye.
In order for a sliding bifold door to work, there needs to be a track that guides the door from its open position to its closed position.
In order for a push to open mechanism to work, the mechanism itself needs to push past the door enough to pop the door open.
Can you see the problem here?
The push to open mechanism, when open, blocks the path of the sliding door.
Now to be honest, when I designed this Record Cabinet I just assumed there was some hardware that existed that could achieve this, but to my surprise I couldn’t find anything for a small cabinet like this, so I had to come up with my own solution.
I achieved this by adding a push block on the inside of the door. The block allows the push mechanism to fully spring open without interfering with the sliding door track.
Now because the push block protrudes so far out, I’ve had to make a slight recess in the opposite door to allow the bi-fold to open further.
The black stain used is just a cheap brand here in Australia called Feast Watson. There’s nothing special about it other than the fact that it is oil based. I’ve use this stain because I like how the light oak undertones come through the black. If I was going for a deep black I would’ve picked another product.
My process for applying black stain is to finish sand everything to 120 grit by hand then apply three coats, letting the stain sit for a couple of minutes before wiping off the excess. Sanding to 120 grit allows more stain to penetrate the wood.
I used Osmo Poly X oil as a clear topcoat which isn’t usually recommended as it can remove some of the colouring from Feast Watson products, but I have allowed the stain to cure for over a week before applying the topcoat.
All my custom-made aluminium hardware has been sprayed black to suit the rest of the cabinet. All other hardware is by Blum.
The Tools & Equipment I use- kit.co/nickped...
For weekly updates- / pedullastudio
Standard Questions-
- What glue do I use? Titebond 3
- What finish do I use? Osmo Oil satin
- What stain is that? Feast Watson Prooftint- Black
100,000 Subscribers! Thats unbelievable! Thank you to everyone who watches my videos. I truly appreciate the support, and if you haven't already, please like, share and subscribe as that will really help my channel to grow.
Designed, built, filmed and edited by Nick Pedulla from Pedulla Studio
Music from www.epidemicso...
#woodworking #recordcabinet #tambourdoor
FOLLOW HERE:
Website- www.pedullastud...
Instagram- / pedullastudio
Facebook- / pedullastudio
Gear I Use- kit.co/nickped...

[@allenramirez2778]

I love that you call it a studio and not a shop cuz u are producing art, you've inspired me to change certain aspects of my approach to design

[@bustinCider74]

Yeah.. sorry man, this isn’t woodworking…this is freaking art! Unbelievable piece and attention to detail. I always look forward to your videos coming out. Keep up the great work!

[@pedullastudio]

Thanks so much

[@ইউনচইউনচ-ত৫ন]

top

[@LiloUkulele]

Most will never imagine the incredible number of steps, fore thought, planning, ingenuity and patience needed to achieve your results. Especially enjoyed your custom hardware solution. Your glue up table made a light go on.

[@pedullastudio]

Thanks for noticing

[@Ivo_Serra]

One of the best woodworkers on KZbin, without a doubt. Thanks for giving us the privilege do whatch and learn from you.

[@pedullastudio]

Thanks so much! I appreciate the comment!

[@rolikasbam2569]

So true

[@mattlong6359]

Truth

[@ইউনচইউনচ-ত৫ন]

nice

[@AyoDenny]

Pedulla is in at different level…

[@KCustomCreations]

Young woodworker here. You really inspire me to be better, not only at the craft but also at video making and picture taking

[@kennethdrovdal1082]

Your projects are 'wood art'. On your stereo furniture piece, it was genius to hang those doors on aluminum track with the rollers. The canvas backed tambour rollup brought back memories. Out of oak, I built seven wall-hung cabinets with split tambour doors that rolled horizontally. The sixty-inch-wide cabinets hang over the individual birthing room beds in our local hospital and hide the oxygen and other mechanicals involved in the birthing process. After working for the hospital for twenty-one years, I've been retired for sixteen years now, and those rooms are still being used and the tambour doors are still functional. Building all the cabinets for those seven rooms is one of my most prideful projects.

[@cmckulka]

What an awesome legacy to leave. That sounds like a much more welcoming environment for a mom in labor. Thanks for sharing your story.

[@williammaxwell1919]

I think one of the most amazing things about your shop is the glue-up /clamping /in-feed frame, never seen it before, but makes so much sense

[@jean-claudeleclerc9630]

Been watching your videos for a while now and man what an inspiration you are? Not only in high end woodworking, but the way your workshop is organized tidy and clean is nothing short of an art in itself. The highest level of respect is what you deserve my friend!!!

[@ipasiczd]

I'm glad you started posted videos more frequently. Already from your first videos I was impressed by your woodworking skills and I was sure you will conquer youtube if you start posting more regulary... I think i'm not over reacting if I say that you are probably the most advanced woodworker from all we can find here on yt.

[@pedullastudio]

Thanks so much! Thats very kind of you

[@ইউনচইউনচ-ত৫ন]

ok

[@sajadulislam7619]

ok

[@Smudgie33]

Woodworking at its finest. No talking. No music (apart from the reveal). Just quality content… 5/5

[@pedullastudio]

Thank you

[@cinders302]

I like some audible content so long as it's well done and stays on point.

[@TheClBlues]

I really think that you deserve a great career in furniture woodworking. Sure, the pieces you're building are a kind of an art and should be quite expensive, but this is the price for the better to be afford ! Keep on showing us your knowledge, and stay long among the best woodcrafters we can see ! Thanks a lot for this moment of grace !🤩 Sorry if my english is not very good, I'm french…

[@Mimi-ln2ic]

It's just mesmerizing and soothing watching your videos. This is so my style and could fit easily with my other furnitures. It's borderline OCD and I love it. Thank you!

[@mattg6262]

This is just really beautiful work. Inspiring craftsmanship. I also noticed your right hand has been through a lot. You’re still swinging though, and blessing us with this content, and whoever buys your pieces-they’re blessed too. Thanks for not letting an injury stop you.

[@jackknows6509]

You are so within your work, heart, mind and soul. Truly an artist.

[@pedullastudio]

Thank you

[@PenelopeKenny-k5c]

Yet another beautiful piece. Keep them coming!

[@stefanrenser4328]

I really like how your videos are: no words, many cuts so that only the most important things are shown. Perfect!! And your work is like from another planet - Thank you for that!!

[@robthewaywardwoodworker9956]

Great piece. Love the vintage look. That tambour roll up and that black stain got me deep inside. Thank you.

[@hannahstraining7476]

The design of this cabinet really suits its purpose. It has a Mid-Century Modern feel to it while still being very modern. Perfect for a turntable and record collection. Beautifully designed, beautifully crafted.

[@jimolsen2870]

I'm not only green with envy of your shop and tools, but your skill set as well. This cabinet is a wonderful piece.

[@pedullastudio]

Thank you very much!

[@kumosworkshop]

You are definitely one of my inspirations in woodworking. You are definitely THE furniture maker to emulate for modern furniture. I'm un awe with every single project you post.

[@pedullastudio]

Thank you so much! Thats very kind of you

[@gavinclayton9552]

Nick… mate watching you work and create art in the form of furniture is always an absolute pleasure. But this one is next level. You make it look effortless even when we know in ourselves what you are achieving is far from it. Look forward to the next one but for now I’m going to watch this again.

[@pedullastudio]

Thank so much for the kind comment!

[@gavinclayton9552]

@@pedullastudio well deserved.

[@sajadulislam7619]

nice

[@danielberkley3771]

Always torn when watching your videos between being in awe of your incredible creation and sheer jealousy at your shop (especially that cabinet saw)

[@pedullastudio]

Thanks for watching. Ill admit, its a pretty awesome saw

[@PapaFlammy69]

You are so incredibly gifted, holy guacamole... I can just hope to reach 10% of your skill level in a few years time from now! :D Amazing project keep it up, love your designs :))

[@pedullastudio]

Thanks so much!

[@PapaFlammy69]

@@pedullastudio

[@jcheveran]

Truly impressive work…love the care taken and the intricate design elements. To be half this good one day is an aspiration! Thanks for your videos!

[@BrokenThornDesigns]

I watch how you think and work, and it makes me want to immediately drop what I'm doing and go out to the shop and create! Thanks for another inspiring video.

[@pedullastudio]

Thats awesome! Thanks for the comment

[@bristleconepinus2378]

Well Nick, at least we use the same glue! I'm working here in central California w/ B. Walnut and 1/4 sawn W. Oak, retired from a career in Architecture so I don't need to do it for money but people do find me from time to time. Your work and methods are inspirational, we do a lot of the same techniques but here you are w/ thousands of fans and I have a faithful few. Great work, great technique and great design. enjoying your process...and learning a thing or two....cheers.

[@allergictowoke]

Finally, someone really worth watching

[@pedullastudio]

Thank you

[@JohnPatersonAu]

I really like how you do the basic cabinet frame. So clean and simple. No pocket holes or anything. Hey, I went into the Goodwill store in Brookvale the other day and picked up a solid oak buffet/sideboard for $65 😁. Really good quality with dovetailed drawers etc. and good condition. Just a bit dated. Weighs a ton. No idea what the cost of all that oak would be, but it would be a LOT more than $65. Will be an awesome up-cycling project. 👍

[@Comeriokid]

Outstanding brother! Thank you for allowing us to watch this gem being created.

[@pedullastudio]

My pleasure!!

[@teddyenriquez3429]

Beautiful. And with your high quality woodworking tools and equipment plus your artistic talent, you can create more worthwhile pieces of art .

[@pedullastudio]

Thanks

[@FarzadAmiriMD]

Beautiful as usual! A whole different level of woodworking

[@pedullastudio]

Cheers

[@sajadulislam7619]

wow

[@LoisBraithwaite]

Wow!!! Even though you almost lost it, you seem to have total use of your right hand. That is wonderful.

[@christopherjones5112]

Only got about 10 mins through…have to watch the rest later. But as always, very well done sir! I think you inspire more people than you could ever imagine.

[@pedullastudio]

Thanks for starting it! Also thank you for the kind comment

[@lukecarter7906]

Bro this is poetry in motion with no words needed!! Your craftsmanship is stunning; thank you for sharing your gift

[@DerekHauser]

Your designs and execution are worthy of that amazing shop...and inspire me to step up my game!

[@pedullastudio]

Thanks. All the best

[@무공-c8t]

이것은 목공도 예술도 아님니다. 이것은 작품에 대한 사랑입니다. 궁극의 결정체입니다. 너무멋지네요

[@robjohnston8083]

Thanks for sharing Nick. You've really refined these cabinets to an awesome level, seems an excellent niche to cater to. Cheers!

[@pedullastudio]

Thanks for watching

[@thecasualengineer99]

Nick, your sliding door solution is very clever, and the brass just pops in that black finish. I am slowly learning about improving my woodworking techniques to use at home, thanks for sharing.

[@rppvt]

Nice work on the Tambours -- they always drive me nuts.

[@leatherbydragonfly]

Well done Nick. Funny you mention about your milling process. Some of my woodworking friends chuckle about how long it takes and how much time I let the wood acclimate to my shop. To each his own, it works for me. Beautiful piece. I am looking forward to the next creation.

[@pedullastudio]

Its gotta be done

[@adilaliasghar3974]

Oh man this cabinet's finish took my breath away.

[@FixitFingers]

Another beautiful piece Nick, plus it is the first I've noticed you cruise passed 100K, congrats on both fronts.

[@pedullastudio]

Thanks so much

[@ΓΙΑΝΝΗΣΔΗΜΑΣ-δ4ψ]

Miles Davis said that notes should be rounded.Greetings from Greece.Excellent🌹

[@joshn1678]

We are mere mortals, you are the god of wood working, it's truly remarkable to watch you work. I'd die to go to your shop, it's the most beautiful thing I've ever seen, well maybe your woodwork is more beautiful heh. Thanks for another amazing video!

[@guillaumecuenot6296]

Another crazy project. Magnificent achievement. Well seen the Jimi and the Fleetwood 😉

[@pedullastudio]

Thank you. And thanks for noticing 👌🏽

[@rameshshankar1010]

With these precision instruments you can do wonderful creations in the art of carpentry.

[@CraigLafferty]

This video exemplifies artistry and craftsmanship.

[@pedullastudio]

Thanks so much!

[@johnbown3119]

Beautiful work. I appreciate your write up as well, makes it a bit easier to understand some of the process.

[@pedullastudio]

Thanks for taking the time to read it. Cheers

[@robertthomson333]

You produce without a doubt, some of the highest tier woodworking content I have seen on KZbin, the quality, efficiency and consistency in your work is inspiring and motivation for me to better my own skills. 🤙keep grinding my dude, awesome work.

[@BC-ni3sk]

Oh to have such a great collection of tools, metal and wood working. Terrific outcome.

[@Bigrigjeff]

Simply amazing beautiful craftsmanship keep the videos coming!

[@pedullastudio]

Thanks, will do!

[@nicksmith3037]

A true craftsman! Love your videos, can't wait for the next. I always save up your videos to watch on a Saturday morning with a coffee, perfect way to start the day ✅️✅️✅️

[@shinigamilee5915]

It's like 60's furniture but made at the highest level of quality and in styles that never die.

[@rustico5809]

Il tuo ordine in falegnameria mi fa invidia! E il tuo modo di lavorare è veramente rilassante e di insegnamento.mi hai dato in ispirazione nel mobile che ho da fare,grazie e continua così!!

[@pedullastudio]

Thanks so much! All the best

[@crm.carpentry]

I love it! Such a beautiful piece! So much inspiration for me! Love the brass! All of it really! Stunning

[@pedullastudio]

Thanks so much

[@divinenonbinary]

OMG the most beautiful handmade piece ive ever seen

[@pashkenty]

I don't like big words, but you are a really great talent. You 're doing great ! I quite rarely watch all the movies on KZbin from beginning to end , but yours are always completely . Thank you very much and I am waiting for the next creation.

[@mathiashosang571]

Es ist immer eine echte Freude dir bei deiner Arbeit zuzusehen! ✌

[@pedullastudio]

Thank you for watching

[@javierricardo500]

Regards from Argentina !! Nik you are the Lionel Messi of woodworking!!!

[@vicramos9212]

The bench you made museum piece this Quality Quality Quality furniture bring your A game gentlemen there's a new teacher in town 😎

[@foolsail]

Your craftsmanship is a thing of Beauty. Love the videos.

[@pedullastudio]

Thank you very much!

[@عليقاسم-ه6ع4ظ]

Thank you for your masterful and elegant work

[@wojciechromanski6014]

what a job !. beautifully, with attention to detail, perfect workmanship. it was worth watching. I greet and wish you much success, peace and health

[@stanwiggins3423]

Beautiful table work. Thanks for showing us the details.

[@pedullastudio]

My pleasure!

[@bennischwarzfisch1828]

Ein wirklich schönes Möbel. Die Türen mit dem Geflecht aus Metall lockern die Frontfläche schön auf. Ich liebe die Idee mit den Rollläden für den Plattenspieler. Da ist keine störende Tür im Weg. Ich habe bei meinem Schallplattenregal aller 20 Platten einen Teiler gesetzt. Schallplatten sind schwer und biegen ihre Nachbarn.

[@bananacrash5841]

I love woodworking.I love pretty furniture.I love watching your work.And i must say....you have lovely workshop

[@NacuK85]

Greetings from Turkey, I enjoy watching you and your videos every single time. your designs are exactly to my own liking and everything looks fantastic in terms of craftsmanship. I just wanted to tell you that. Great craftsman and artist.

[@kenlumhemang7654]

Your woodworking is so refined please keep providing more videos

[@_Rikk_]

stunning

[@pedullastudio]

Cheers

[@murohabana9899]

Felicidades amigo! Gran trabajo.

[@dhirajshetty6385]

Absolutely stunning and a marvellous work of art 😍❤, Thanks for sharing !!

[@pauld9530]

Very nice, i how the grain shows through the black stain. The mechanisims you made work fantastic

[@McDreamyn_mdphd]

Wow----your work is so incredible. I am in awe, and jealous too! I would never be able to work at that level, not in a million years.

[@lucky9er567]

Absolutely gorgeous. I hate all the wonderful tools you get to have but still, absolutely gorgeous😶

[@pedullastudio]

lol, Cheers

[@capitalmedic]

Thanks for this video. I am in the middle of making a record console from walnut. Got a couple ideas for mine from this. Thanks!

[@donaldmatthies6026]

Another cool project. Thank you for taking time to film, edit and post this video.

[@uponly4489]

This is one hell of a cabinet I've seen

[@mariadelpilarjaramillo7334]

watching you to work..... I found it relaxing man ;)

[@alimirazimzadeh544]

this is absolutely a masterpiece

[@sterlinghein]

Beautiful work, love the bifold hardware and all of the detail. Also loved that intro music!

[@pedullastudio]

Thank you

[@MCsCreations]

Amazing work, dude! Really beautiful piece! 😃 Nicely done!!! Stay safe there with your family! 🖖😊

[@pedullastudio]

Thank you

[@ДенисГлебов-ж3ь]

very clean work. hello from Russia.

[@pedullastudio]

thank you

[@devinlabdevinlab1221]

amazing work

[@adamakaru2683]

Amazing! you are very knowledgeable and practical and with the Sgt pepper Lonely Heart Club Band Beatles album you don't have to say a lot thank you.

[@troystaten5633]

Nicely done, thanks for showing us.

[@pedullastudio]

Thanks for watching

[@marcelotanaka5911]

Fantastic ! Amazing ! Congrat !!!

[@BluesmaNeedham]

Love what you did with that custom hardware! super smart!

[@RenegadeADV]

man that thing is a work of art.

[@daviddowning9706]

Wow! Always impressed. Thank you for sharing.

[@pedullastudio]

Thanks for watching!

[@reyjo1976]

Tremendo trabajo, es hermoso ver el avance de cada obra de arte que haces, ojala algún día llegar al nivel de talento que tienes, te admiro mucho, felicitaciones esta demasiado hermoso. Saludos desde Chile.

[@ovi_ovi78]

stunning like always

[@pedullastudio]

Cheers

[@SusanFerguson-ij3se]

Your woodwork is outstanding.

[@mattelias721]

Beautiful cabinet. Like others below, I appreciate your methodical process. I also have to admit that your panel gluing system is awesome. I like the stain and how the oak shows through. Have you ever tried using iron acetate?

[@brayanchonay2512]

Beautiful work😍❤. You are the best!!!🔥🔥

[@pedullastudio]

Thanks

[@MaudeneFelty-Gunderson-wm6zf]

I agree with you this guy is an awesome wood worker I really enjoy watching him he is one of the best

[@josegustavo285]

EL MEJOR MOMENTO DEL DÍA, CAFÉ & PEDULLA STUDIO ☕

[@mndlessdrwer]

White oak is one of my favorites for dark finishes as well as washes and bleaching. The grain is just so distinctive. It also has the benefit of being quite strong and durable, so you know anything you make will last generations. The only real downside to white and red oak is that they're quite a nuisance to route and any of your hand tools need to be quite sharp to be able to cut cleanly into the wood.

[@cafeypentagrama7790]

Master...!!!! Chapeau

[@normanzurich2781]

Congratulations from Paris France 🇫🇷🟦⬜️🟥

[@estebanarayamartinez893]

I thought you were a god, but I saw your scars on your hands and you are one of us. Amazing work. Thanks for sharing.

[@pedullastudio]

Unfortunately it can happen to the best of us. Thanks for watching