Pelican Bass Raider 10E Bass Boat

Tricking Out The Pelican Bass Raider 10E Bass Boat.

[@aravilla5733]

I miss you baby...i won't be tired watching and listening to you...hearing your voice gives me comfort and all memories we had will never forgotten..i love you and i will always will

[@rubenhernandez2250]

Love how clean this boat is and organized a must when fishing!

[@stevenvalenti3722]

Wow! I have to say I've looked at alot of videos on KZbin with this boat. All because I'm thinking about getting one also. And your setup is definitely one of the best setups I've seen. Great job sir.🙂🎣

[@mikec9684]

USMC motivate me! Meaning someone do something great today, get me pumped. You sir have motivated me. Ive recently purchased the sun dolphin but have started my conversion to bass modificatiins based on and around your design, i just love it that much. Everything in its place is the only way ( the right way)... for some of us. Great winter garage project. Semper fi.

[@randylane8035]

Very nice. How did you create the front tray for the rods with the half moon pieces of PVC, and did you Velcro all the PVC pieces down, or did you have to use screws any place. I'm just leary of how well screws will hold after some use. Thanks

[@kajuandillard7702]

This is the best set up on this boat that i have seen so fare...great boat

[@billybryson2009]

This is a seriously impressive little fishing machine!

[@kerrywages9631]

Nice Mods...Did you use well nuts for the cleats you installed or do you think screws w/ adhesive are adequate?

[@terrywilsonjr7870]

This is a nice set-up I have the same identical boat. Please share with us how you have your Trolling Motor mounted and secured to the boat

[@B.A.Bassangler]

Working on my new Raider 10e. I also like a stowed trolling motor that doesn't take up any deck space. Did you just shim up the area under the frontmost part of the mounting plate. Hard to zoom in, looks like something in the divot above the handle. What connectors to mount the plate? In hindsight would you do anything different? Thanks for any help you have to offer.

[@6878jeff]

How fast would you say that 6hp pushes it? I have the exact boat and motor but it seems to have a ton of drag but I think your shim tricj might work

[@jimbennett6908]

Thank you so much for the info. I checked with Smith trailers and I would have to put every but and bolt of theirs together. Again, nice boat and thanks for getting back with me.

[@jeffcollins1172]

How well does it operate in windy conditions, say 10-15 mph. I have a kayak that gives me fits in slight wind. How did you like the 8 footer?

[@oldArmyVet]

Awesome job on the boat!! Working on my boat right now. Thanks for the great ideas

[@JAMESSMITH-fn8kx]

I like his idea about a fishing pole holder the best. That is good information about the boat trailer.

[@mr.tooproc1880]

Awesome Job on this boat. I am thinking of getting one. I love all the things that you have done to yours. Thanks

[@richard3423]

Thanks, you really cant go wrong for the money and portability / maneuverability

[@richard3423]

I still have it, i bought a new weld craft 12 foot john boat and new Dohatsu 9.8 hp 4 stroke outboard 2 months ago. Believe it or not i miss using my little pelican!

[@lizatenchbrings9342]

Well done, Richard! Is the trolling motor one of those that uses I-Pilot to keep you in place or travel in a circle? If so, does it work ok with an offset mount like that? Thanks! - Liza

[@ronbennettoutdoorswildlife1514]

I see this was posted 2016. Are you still happy with boat? Thinking about getting one. Is it just as or more stable than 12' Alum Jon boat? Seats look comfortable. Where did you get them? Thanks for sharing.

[@gaboysoutdoorstv9879]

im 17 and bought one for my first boat i have been in many small boats but this boat is one of the best me and my brother both have plenty of room and it is really stable for a small boat

[@AtypicalOutdoors]

Love the boat... This is one of the best Bass Raiders I have seen.

[@rmccrna1]

So from reading your comment I assume you used wood screws for your tie down or anchor cleats? Anything else to strengthen them in case used on a rough day with an anchor?

[@richard3423]

I just used cleats with 4 small wood screws. Quite strong they have never loosened

[@bartbell5778]

How did you attach the winch hook to the front of the boat? I looks like the hook is removable so that the trolling motor could be located at the front?

[@marcgeronimo2997]

I would really like to know how he did a couple key things on this boat. one of if not the best bass raiders i have seen.

[@jacobslough45]

question, if you put a casting deck on the front along with the trolling motor do you think that would level out the boat with one person in the back when you go with the motor going (a 6hp)

[@kerrywages9631]

Beautiful job ! I just picked up a Mercury 3.5 hp and should probably get a motor support or transom mount...It looks like the motor is fully vertical with transom mount. What brand did you go with?

[@josephhence9292]

What did you use to mount the foot control motor on the side? Did you have to shim it?

[@avan2620]

Are the trailer bunks underneath the pontoons? Or in the center in between the pontoons? I set my trailer up and am trying to figure out which way would be best

[@richard3423]

Hello, sorry im not on here much now days. I positioned the bunks on pontoons (inboard of the center ridge. Then set the side bunk / guides as close as possible and she will load good every time. Good luck and tight lines!

[@usp.4073]

Beautiful set up. I think I know what to buy for my old 6 horse Johnson. I think it may be overpowered but it’s nice to have power when you need it. Well done.

[@davidhelfrich6487]

Be sure to only put a max of 3.5hp gas motor on one of these. Why the back submerges, great setup man!

[@ontargetthomunclesam3926]

You are absolutely correct other guy and their ideas about putting 150 lbs. Of B.S on a ten foot boat wow unbelievable it's all about the KISS keep it simple stupid I can certainly appreciate what you have done as far as maintaining room remarkable job yours is one of the top videos on KZbin the only difference in mine is the rod holders are on the inside above the floor

[@chancewadefishing9963]

Wow this is awesome I got this boat not to long ago and had no idea what to put on it but now I do thanks man great video

[@keithdupriest4491]

What kind of seats are those, and where did you get them? Did you have to buy a swivel bracket separately? Excellent set up, btw...

[@chuckcrabbe3253]

Very nice. I like the PVC rod holders. Great idea

[@sapbtc05]

What did you use to mount the plastic half pvc rod tip holders? It’s a block and is it plastic or wood?

[@richard3423]

use coarse wood screws and dont drill. Firm hand pressure on screwdrive and screws will go right in. Do not over tighten scresw. wooden trim

[@magicsam84]

Nice clean setup! I love these pelican bass boats 👍

[@emperialmusicgroup]

Nice mods , very clean and organized

[@basswhisperer4803]

Amazing boat!!! Thank you for all the ideas!

[@lawrencedarby3444]

Best set up I have seen.

[@fernandomendoza6738]

I also have a pelican mine is the predator 10.3, and I love it. But i really like what you did to yours, great job👌

[@stevep7517]

Great video indeed! I am new to the fishing scene, and I enjoy bass fishing. Last season I fished from the banks. I want to get a boat for the following season, but I don't want to put a lot of money into it. Neither do I want to go cheap. After looking at the various Jon boat, etc. I've decided to go with the Pelican Bass Raider 10E. It appears that this boat will fit my needs. I like how you organized the boat. You didn't mentioned the flooring ... how you did it. Also, about how much money do you have tied up in it. Thanks for the information.

[@thomasseay1177]

I really like your setup. I just got a Bow Mount Minn Kota, and I was wondering if you might be able to share how you mounted your on the Pelican.

[@240LTS]

... Yes, and what kind of support underneath was used to keep the mounting bolts from ripping out of the plastic? .

[@BAMASTYLE]

how did you attach the pvc rod holders? looks like you drilled a hole in the top of them to screw them to the deck.

[@cgriesemer]

tim johns This is my question as well

[@zx14dudeee]

Nice boat, I somewhat envy your organization. Like your shirt says, those jeans you are wearing are definitely extra. 😉👍🏻

[@niederbomber]

What kind of carpet did you add, and did you just put it straight on without anything else underneath it?

[@richard3423]

Yes 1/2 inch plywood. Just stapled the indoor outdoor carpet to plywood. I have only two "short' screws fastening plywood to bottom to prevent warping

[@RobBastien]

Fantastic presentation of an awesome boat.

[@Thackula]

Does the trolling motor being mounted on the side affect the "steering" of the boat? I would think it would try to turn the boat when being used.

[@240LTS]

... If I may, many boats (bigger ones) have the TM off the side. No, it does not affect it to the point that it is a problem. .

[@steve1967gila]

Great video, and you little boat is very well thought out

[@thomasgarrison3949]

Great video, but the Bass Raider is rated for a outboard motor (maximum 3.5 horsepower)! I love your mods, I have one being shipped to me.

[@lonniehall9006]

What did you use to attach the rod holders, and or any other attachments to the plastic??

[@minatrii858]

Great job, love the video. My husband and I plan on getting one soon.

[@boomn216]

This is exactly what I need for our lake near me. I like this.

[@FishingWithJBT]

Thinking about getting this boat soon,thanks for the vid and it looks great,tight lines brother! 👍

[@RkRk-xy9fx]

Wow! Love the organization/engineering! Love the rod storage/staggering and keeping one side open. Smart. How do you like the trolling motor mounting system? Hope you do more videos! Thanks.

[@bradleywall9089]

id love to see more detail on how you mounted the trolling motor!

[@panhandlepilot9363]

Can I ask how the seats dont blow out on the road? Very nicely done

[@Bendecido504]

Richard, that is a Really nice boat! Good job.

[@fishingismydrug1]

Very nice sir! How did you mount the trolling motor? Toggles? Rivnuts?

[@jacobslough45]

love this boat really looking at getting one! I was just wondering if you could do a video of you on the water with the motor running? thanks!

[@richard3423]

Many thanks, think i have video on water (short) . Will try to upload it. Im not using it now, had to get bigger boat to take along my wife n daughter fishing...sure miss the little Pelican though.

[@jacobslough45]

thanks!

[@MrCountrycuz]

Fishing is a solitary thing for a man to do alone. Hemingway did not call his book”The old man and his ball and chain and rugrat.”

[@MrCountrycuz]

The twin troller is the ultimate 10 foot boat with superior handling.

[@martinmullins280]

What type of seats?? I really like the set up love the rod holders very nice great job 👏

[@donwilliams8502]

Nice setup. I'm looking to retire soon. This should do great for my needs. Thanks for the post. Please post any new mods you come up with in the future.....

[@renn9069]

Nicely set up. Imagine what Richard would accomplish with a larger tin boat.

[@368engbn]

Very Very nice.Thanks for putting this up.

[@Rlee410]

to move from front to back, how about a hinge system on the left or right side of the front chair rail so you can flip the seat from the other side without the hinge upwards so you can move to the front or back freely and the seat will be out of the way? just a thought

[@richard3423]

Hello, hinge is not a good idea. If you look how the seat frame sits in boat...when the boat is in the water the seat bases give support to the sides. When lifted the sides will pull together slightly and seat rail difficult to re engage.

[@Camz316]

Richard I have been looking and looking for the perfect setup for me. Well I found it in your design! Great build. I absolutely love it. I will be building mine very similar to yours and probably asking lots of questions along the way. You wouldn’t happen to be anywhere near raliegh or Richmond would you as I would love to see this thing in person. I live between raliegh and richmond.

[@jamesbeal8934]

THIS video is over 5 yrs old but i noticed that boat is only rated at 3.5 hp. wonder if he ever had problems with transom vibration..others have stated there is transom flexing on this boat..

[@kendarnell]

What do you need to register this boat in Indiana? I have been looking on Craigslist but it seems none of the people selling have titles. Thanks

[@richard3423]

bought mine new and it did not havre a title...BMV gave me registration. There is a serial # plate on stern, you will need this # and bill of sale.

[@ArkansasVapergmailcom]

I love how you mounted the tm I wish you would have shown more of that because I have a raider myself and I just bought a minn kids 55 lb thrust transom mount because I couldn't figure out just how to mount the one like you have but great video bud I received a few ideas for my boat. Btw have you ever thought of installing a phone charger???? If you do please show how you run the wires through your boat. 😜

[@MrDboss70]

Really nice job with the boat. I've been torn between this boat or a fishing kayak.

[@randywilson6869]

That is one nice little set up. And yes I did get some ideas. I think I'm going to go ahead and get me a twin troller x10 and tha will free up the space of your trolling motor but I like how your seat is

[@richard3423]

Yes thoe are interesting, but substantially more money

[@montycraig5659]

Hi Richard, another Indiana boy here, and I am just now starting to look at fishing boats. I am not too far off from retirement, and would like to do something like this in order to be able to fish without breaking the bank. I found a Pelican 10e on Craigslist for $600. I don't want to seem rude, but how much more could I expect to put into this boat to get it up to par?

[@montycraig5659]

I might follow this post up by saying, I don't know anything about boats beyond what I am now learning online... Green as grass.

[@RAM7RO_BU1LD3]

great review and overlook of your boat, I'm looking to buy this boat. thanks

[@anthonydelrio1767]

Boat is setup beautifully.

[@michaelpierce1553]

Wow! Best video I have ever seen. You did yourself proud! I have watched again and again. Hope to get one myself real soon. Again, great job my friend, Great Job! Think I'll watch it again. Ha Ha

[@catherinefraser8403]

really good setup i run the same motor on mines and i love it next is a trailer

[@floydaltonmiller]

You did a great job on the boat.

[@jeffjackson5331]

nice looking boat. i was looking at these at Dunhams an loved it. what do you use for navigation lights?

[@richard3423]

I neve use it at night but walmart carries nice navigation lights which would be easy

[@jeffjackson5331]

+Richard Dearing oh ok and i saw those lights at my Walfart. I was just curious. Boat looks good by the way.

[@ridinggravity703]

wow man! u really opened my eyes to the possibilities i have with my boat! i think i am am going to go for a front mounted foot controlled trolling motor. does it weigh down the front much when you are alone?

[@jimbennett6908]

Very nice set up Richard! I just sold my big bass boat last summer and thinking of down sizing to a Pelican 10 E. Did you buy the trailer assembled and, if I may ask, about what would the trailer cost? Thanks my fellow Hoosier. I love in Connersville.

[@richard3423]

Hi Jim. Yes i biught the 12ft trailer fully assembled at outdoor word in Washington, In. cost $900.00. Good luck!

[@richard3423]

Mid America trailers, purchased at outdoor world Washington, In.

[@jarheadfishing9181]

If you dont mind me asking how much was that trailer?

[@davidsexton8506]

What size trailer are you using, been trying find one for mine

[@burtgordon4796]

Are you still fishing this boat? I love what you did with boat. What part of Indiana are you in.? I'm near Lawenceburg/Cincy. Great video!

[@matthewrodriguez6447]

Love the boat . I want to buy one and I am thinking of getting one very soon.

[@ilovehonda20]

Does the carpet and plywood help? With stability while standing up?

[@richard3423]

Hello. yes the carpet and plywood made a big difference. Yes it is rated for 3.5 hp but i think they are being overly cautious. My evinrude weighs less that a new 3.5

[@benhoxsie7027]

Great video!

[@davidcopple8071]

You could add head and deck lights for night fishing

[@lonniehall9006]

How did you attach the trolling motor??

[@williamwhite3503]

Have you had and problem with the trolling motor mount screws coming loose

[@riverfishing2051]

Richard, great review. I'm glad I stumbled across this. I'm looking at the Pelican and the Uncle Buck's Pond Prowler Boat - 10'. Did you consider the pond prowler? They seem similar. Thanks Mike

[@richard3423]

Im sure the pond prowler is ok too, i just like the pelican design better, and i had an 8 ft before so i stayed with it

[@stevesuhay356]

Wow ! Really nice what you did to that boat . What type trailer is that ?

[@john_193]

Great Video. I have this boat. Looking for the best rear mounted motor for it. Any suggestions?

[@randywilson6869]

And I love the rod holders for sure. I might borrow that one

[@kd4ysi]

Great looking rig how fast does the boat go with the outboard motor

[@dakotalights8978]

Will you show how you got the trolling motor mounted please

[@sporkcrx]

Dakota Lights agreed!

[@Lowdowndirtybassin1978]

Yes please make a video of you mounting trolling motor

[@BillyBob-jb3yy]

Yes great idea 💡

[@jarheadfishing9181]

Awesome video! I love the mods you made on this. Update on the boat? Fishing video from the boat?

[@rods2232]

Just got mine..Can't wait to put it in the waterDo you have a fish finder on it?

[@billyhurley6866]

I like your rod holder 😉

[@marcelodelatorre195]

Wow that's one tricked out bass Raider

[@paulperry3305]

awesome video thanks for sharing for your next video could you make one you trolling the boat while fishing?

[@CAMEO1955]

hey nice job on your 10 e . can you tell me where you got them seats ?

[@michaelgalvez8300]

With 78k views you need to make some more videos

[@dirtydawg7260]

Awesome set up!!

[@VernonPerdue]

Nice Job. I,m sure you are aware that you have over powered the boat with the 6 hp motor. They are only rated for no more than a 3.5 hp motor. I would check your local laws on HP ratings so you don't get into trouble.