Pella Sliding Door Roller Replacement or Lubrication

[@DavidB.-hd3mj]

Used your video to successfully replace the rollers on my Pella sliding door. Thanks!

[@DeathScouter]

Thank you for watching and the kind words.

[@MattKlevemann]

Paul thank you very much for this video. Got my door working in 15 minutes using your video. Thanks again.

[@kevinmartin7852]

Thanks for the video! I have the same door, followed your video, and fixing these wheels was a BREEZE!!

[@dennisbond7112]

even i comprehend how to do the task without difficulty. great, easy to follow without the small talk. I read ya loud and clear. Out

[@shutupdog11]

Thanx Paul !! I looked for a while for chging out rollers on a plla door . Yous was the best . Subscribed too !! T U

[@DariushMolavi]

My identical door was given me all sorts of heartburn trying to open and shut. Seeing how to take it off the track showed a clump of dog hair blocking the way that wasn't visible otherwise. Thanks for the vid. 👍👍

[@yjb713]

Hi Paul. Just wanted to say thank you for this video. It helped me replace my rollers. My Pella door is a tiny bit different, but your instructions worked very well. Thank you!

[@davezak5870]

I've removed my door multiple times in the past to clean and lubricate the rollers and wanted to point out that on my door you can't simply lift the door and slide the bottom out. That's because you need to be able to lift the door high enough so that the rollers will clear the track that they are riding on. When my door height is adjusted up (by lowering the rollers with the adjustment screws) so that the door latch is at the proper height, there isn't enough room above the door to raise it enough to slide the bottom out. If you find yourself in the same situation, you need to insert a long screwdriver into the holes in the door and adjust the rollers up so that the rollers will clear the track when the door is lifted. You'll need to reverse this process when the door is reinstalled.

[@Rakshir46]

Thanks, been in the new house a year and learned some very useful tips to work on our two pella sliding doors.

[@DanWaugh-oc3eo]

your video was great, thank you!

[@pappy8942]

Terrific video, thanks for taking the time to put this out here.

[@janetlewis9886]

I can’t thank you enough ! I followed your instructions and it went perfect ! Dave from Milford Massachusetts

[@ericr2zz]

Thank you, Paul. I have the exact same Pella door. BTW, the doors are warrantied for 20 yrs. Pella would send you new hardware if your doors are less than 20 yrs.

[@DeathScouter]

I didn't know that. But thank you.

[@stefanielubash697]

we were told hardware was warrantied for 10 - so there was a charge for the rollers. 20 years for non laminated glass. We have the Designer Series purchased in 2006

[@alann3805]

The Pella 0C5Y00P0 rollers are still available from Pella. They come in a package of 2 rollers and are way cheaper than an internet supplier located in New Jersey.

[@michaelgalloway9085]

How do you find it on Pella. I looked and can't find where to look up by part number.

[@alann3805]

​@michaelgalloway9085 You can call the National Pella support number and give them the serial number of your sliding door. They will verify the rollers for your door and you can place an order with the representative.

[@brettgardner8575]

You're a stud, thanks

[@IrfanAKhan-ee4nr]

Thank you Paul. This is very helpful video.

[@heyangst6159]

Great video Paul

[@RightYouAreKen01]

Thanks for the video. We just bought a house with the same sliding door and I wasn't sure how to get the door out of the tracks. Your video was a huge help.

[@TSkoler]

❤❤❤❤❤ amazing video!

[@danieljohnvenne1569]

Hi Paul, Thanks for the video. You make it clear to see & understand. Our door looks almost exactly the same as your door. Do you knoiw if Pella doors would all use the samr roller as the one you suggested? Our door was installed in 1998.

[@bibirobers909]

Serious thanks. Thx for the visual.

[@photosbyhelo]

Thanks for door removal advice!

[@steveaedwards]

Thank you so much great video!!!

[@wes1424]

You do not have to take off the bumpers, simply close the door the take off the guide and lift off. I installed my new door in 2007 and just replaced rollers on 3/10/23

[@CorneiliusLibowitz]

This is true. I have the identical door and all i did was take off the guide. Then again, it might depend on the length of the door track, and/or where the installer drilled the holes for the guide.

[@firaskaileh7930]

Great video, I have same doors how do I remove the screen panel door? Thanks in advance

[@Celtic_morning]

Very informative tysvm for sharing! I am curious though... is your door inside out? Mine opens and closes from inside the house. Yours appears to open from the outside. Truly curious. Maybe it's my door that is backwards. Thanks in advance!

[@bombjay2]

My door was hell..like square rollers. This got me in. Pulled em. Now rolls like an almost new door. Could you pack em with grease?

[@IrfanAKhan-ee4nr]

Do you have a video for replacing car or pick up truck break pads?

[@toma3980]

I need to replace mine and it’s exactly like yours. Where did you order and what’s the item number?

[@susanpurcell6594]

I absolutely cannot get the old roller assembly out of the door. My door looks exactly like yours and it has phalanges. We replaced the roller assembly on the same door (downstairs) and don’t recall having any trouble removing the old roller assembly. It works like a charm. Any ideas? We tried using pliers, a small pry bar and even a hammer and it only came out about 1/4 inch. We hit it with WD40. Then we have up

[@CorneiliusLibowitz]

Mine was tight too. i started prying it up evenly with 2 screwdrivers on each side. Then used a fairly large aluminum pry bar to finish it off. I noticed the pin rusted on mine and was the likely culprit for causing the binding... If still no joy, and you haven't watched it yet, another guy posted a video on how to fabricate, and use, a hook and slide hammer to remove it. Hope this helps!!

[@williamreadon9052]

currently on amazon too

[@allisongaudaur7713]

How old is your door? Ours is 33 years old and want to make sure that this part would be the same. Thanks.

[@robcameron5682]

I can't find roller assemblies with tabs?

[@ilchzhed]

0C5Y0000 Pella online parts only $50.00 for 2

[@vasilioskarras4412]

Found the part on Pella's website: www.pella.com/shop/parts/configure/?heading=Sliding+Door+Roller+Package&id=sliding-door-roller-package&options=Brand%3DMultiple%2CProduct%3DPatio+Doors%2CProduct+Category%3DSliding+Patio+Door%2CService+Type%3DPanel+Parts%2CHardware+Type%3DRollers%2CMaterial+Type%3DGalvanized%2CPackage+Quantity%3D2%2CDescription%3DSD%2FMS+Galvanized+Roller+Pkg+%282%29%2CPart+Number%3D0C5Y0000%2C&type=part $53.72 after tax with free shipping.

[@donl9571]

You may want to add a comment about removing old rollers that don't have the tabs on the side like yours did.