Perfect For Beginners! $270 Elegoo Mars 5 Ultra Resin 3D Printer

This is going to be the perfect resin 3D printer for beginners $279.99 Elegoo Mars 5 Ultra
Thanks to Elegoo for Sponsoring today's video!
Mars 5 Ultra $269.99 - bit.ly/Mars5Ultra
Mars 5 $179.99 - bit.ly/Mars5UJ
Saturn 4 Ultra $400 - bit.ly/Saturn4...
Saturn 4 $300 - bit.ly/Saturn4UJ
Mars 4 Ultra $309 ➜ bit.ly/Mars4Ultra
amzn.to/44TKn1r - Amazon
Mars 4 $259 ➜ bit.ly/ElegooM...
Neptune 4 Plus - bit.ly/Neptune...
Neptune 4 Max - bit.ly/Neptune...
New PLA Colors - amzn.to/3tKK24A
Neptune 4 Pro $299 ➜ bit.ly/Neptune...
Neptune 4 $259 ➜ bit.ly/Neptune4
NOW ON AMAZON ➜ amzn.to/44kLsiJ
Siraya Tech Fast Green Resin ➜ amzn.to/3XF8FMK
Files from todays video
Miniatures by Loot Studios
lootstudios.com
Leonardo Teenage Mutant Ninja Turtle by Printed Obsession
than.gs/m/1077124
Knight of Action by Witchsong Miniatures
www.myminifact...
Kaiju by Forits Mint
thangs.com/des...
Checkout MY PATREON / My 3D Printer Settings ➜ / unclejessy
Make your own Resin 3D Printing Timelapses with Resinlapse ➜
linktr.ee/resi...
Some links on this page are affiliate links that help out the channel.
________________________________________________
My PATREON ➜ / unclejessy
Buy Me a Coffee ➜ www.buymeacoff...
_______________________________________________
Gear I'm Using ➜ www.amazon.com...
________________________________________________
Twitter ➜ / unclejessy4real
Instagram ➜ / unclejessy4real
Facebook ➜ / unclejessy4real
KZbin ➜ / unclejessy
________________________________________________
Thanks for watching!
#3DPrinting #resin #tmnt

[@UncleJessy]

Checkout the brand new Mars 5 Ultra & Mars 5 279.99 Mars 5 Ultra - bit.ly/Mars5Ultra 179.99 Mars 5 - bit.ly/Mars5UJ - affiliate links

[@photoshopguy44]

How did you do the resin calibration? I did it with their test file but can't find the how to in the manual.

[@UncleJessy]

@@photoshopguy44 you have to set it up in the slicer with any file you want to use. Create 4, 6, or 8 copies, export that file. Upload to the printer under the exposure settings area. Then set your times

[@photoshopguy44]

@@UncleJessy ok thank you. And just to clarify- I am doing this with the USB it came with and not remote printing to the device - correct?

[@JustGee3D]

I'm just going to think of printers like PCs because a new one comes out every year and I'm always outdated 😫😫

[@portcityengineering]

It’s a good thing though, as they all compete to make the best machine and tech gets better and better we the consumers reap most of the benefit with new and better tech FAST! Just like computers since the 90’s-00’s

[@7kortos7]

and just like a PC i'm going to over buy so i can get 5 years out of them. I got two Saturn 4 Ultra coming my way after owning my Ender 3 V2 for a few years.

[@AndreiPek]

I'm rocking saturn 2 and it's still perfect.

[@jije69]

I got artillery sidewinder x4 coming on my way​@@AndreiPek

[@ImSandwich]

The price stays great too

[@jasoncombs3232]

The tilting vat makes it worth every penny! My S4 Ultra has been running non stop since i got it. 😊

[@Mrpancake72]

Mine hasn't been running... half the build plate. Garbage

[@bigboi71]

Same here

[@petercallison5765]

@@Mrpancake72 That is concerning and I bet they don't have enough spares in stock.

[@kipicbloud]

I've been wishing I got a second one of these instead of my GK Two.

[@luisnegrao4948]

Wow, the baby dino that I modeled for Loot Studios got featured on Uncle Jessy, I'm so happy!!!

[@UncleJessy]

Oh did you design that? I thought it was way too cool! I want to print it a lot bigger

[@luisnegrao4948]

​@@UncleJessy I actually made the 3D model based on the illustration by my friend Kevin Franciosi (which actually works at Loot Studios as well). It is so nice to know that you enjoyed the model. Thank you so much!!!

[@arbitScaleModels]

to protect your resin tray, you really got to get a silicon scraper instead of that yellow plasic scraper

[@Brettoh]

If it’s got a clean edge, both will do/wont do the same damage. Accept the sheet is a consumable and do what works best.

[@obscenity]

I printed my own scraper

[@Bpboshoff]

They should stop including those scrapers in the box.

[@AFireGnome]

Really excited to see this one. It's more budget friendly and I might actually be able to get it to fit in the space I have available. Thanks for sharing!

[@vd853]

I would hold off on the purchase. I unboxed my brand new Mars 5 ultra, calibrated, updated firmware, and started a real print job. It stops at mid prints. Screen frozen and all. EDIT: Okay, I flipped the switch off and on and it actually resumed. No lines on the prints and it's clear resin too. Very impressed!

[@LeonardGreenpaw]

Hey uncle Jesse. If you use a program like uv tools that can modify individual layers, by making the first few layers have a high wait before print time, more of the resin can be pushed out from under the build plate and that allows you to have a much better adhesion with a much lower burn in time. I use black abs like, and the burn in time is 2.5 seconds, there is no elephant foot and things are sticking so good

[@AndrewSink]

I’m sold. This thing looks AWESOME!

[@Bob-el3iw]

Research the difference between resin & FDM printers, strengths etc.

[@PrintedObsession]

Thanks for the shoutout Uncle Jessy. glad you liked the model.

[@chrisbrezzy707]

Just ordered mines can't wait to get it in 3days!

[@_revivify_7175]

Are you getting the mars one?

[@chrisbrezzy707]

@@_revivify_7175 yes I believe that's tge one comes today finally. Which one u on u got ?

[@chrisbrezzy707]

@@_revivify_7175 yes i got it but still having trouble printing smh

[@tonydaughtry9194]

Do you have any sort of set up to deal with/vent the fumes your resin printers put out? The fumes are the main thing stopping me from making the jump from FDM to resin.

[@JoonKimDMD]

There are many people who died or hospitalized due to resin toxin fumes.

[@kamui004]

Probably they're limiting the speed of the tilting vat to accommodate all types of resin so they don't splash, like for example I imagine with faster speeds and very thin resins.

[@souledgar]

This. They don't want to be liable for any idiot user setting their thing up too fast and getting it all over themselves.

[@UncleJessy]

ohh yeah that's very true

[@quyreansoulsealer4002]

Easy way to clean build plate and tools - put them in the ipa bucket when or after you clean your models

[@beauryan101]

Was thinking of getting the Saturn 4, now thinking of getting Mars 5 instead

[@antoniomromo]

Love the video as usual good sir. Only gripe is the use of "auto leveling" when it should be "autozeroing". Chinese companies often have issues with the translation and marketing of technical details like this. So it's up to us native English folk to correct the information.

[@N0a5301]

The only things is elegoo don't sell the PFA film for this printer but the FEP film like the mars 4

[@UncleJessy]

Yeah, hoping they offer that soon along with extra Drip Trays

[@zachl4904]

@Uncle Jessy, Record your background audio for 1 hour and use that audio as a reference to remove the background noise.

[@hoshi314]

you said fast and slow setting, is there a medium speed setting too?

[@msamyweber]

Jessy, the only issue I personally have with your content is, you are all about pushing speed, speed, speed. Bigger nozzles, larger layers. That might be good and fine for I dont know how many. For me, I stay with 0.03 layers and .04 nozzles. I got into 3D printing for the details and quality. Not just pumping out items. For you, ok, I can understand it is about getting content and videos made. But to forcefeed it speed, speed, speed and bigger nozzles onto everyone... I just dont agree. Again, personal opinion. I do find quality information about machines in your videos, but you lose me when you get kicking about speed and faster everything.

[@andresortiz3510]

i mean, i can believe all the tech this printer has, what i can not believe is the price they ask for it O.o

[@marchingknight11]

When you say there's no way to unlock faster speeds, do you actually mean it's just simply impossible to configure faster feedrates by manually creating a profile in the slicer? Are feedrates hard coded into the printer somehow?

[@kamui004]

For the S4U and M5U, there's no lift/retract speed/height configurations in the slicer like old printers, that config space in the slicers is completely absent for these printers. The peeling is done by the tilting vat and its speed is hardcoded in the firmware with a "Slow" and a "Fast" speed, while the z-axis just barely moves up whatever layer height it is. In the other printers most print time was taken by the 5-10mm up-down movement of z-axis, while these ones is taken by the vat tilting down and up, but the tilt speed is hardcoded. I imagine they could be changed if Elegoo gave away the gcode files for people to alter, like it used to for people to mod the z-axis motor speed limits on older printers for the so called 'vroom settings". But I think Elegoo already tested and limited the speed of the vat tilt to accommodate all kinds of resin without any of them splashing due to too much speed.

[@UncleJessy]

@@kamui004 Yeah, I believe its all "hardcoded" into the internal profiles of the printer for the Fast/Slow print speed settings

[@LS3D_Printing]

Im soooo glad i didnt get the 4. THIS looks incredible

[@leestevens3226]

What are the fume outputs like on this? I live in a flat with not much room to place something like this so I need to know what it's like to handle the fumes.

[@Old_Wizard_Minis]

quality difference between fast and slow?

[@UncleJessy]

Zero that I could tell from my test print. It might be more apparent with different resins though or more beneficial with certain resins to print slower over faster

[@nicolaibrushansen205]

What do you think of the Mars 5 vs. the Mars Ultra 5? If I want a printer for miniatures. Do you think the Mars 5 is enough. Or does the Ultra have better features that is worth paying extra for. I'm not going to print a lot. But Im willing to pay the extra if it is worth it :)

[@readymadekhane8247]

Question what's the gray resin you like using the most?

[@LukeGoodwins94]

Are the release dates different for other countries? We still can’t get the Saturn 4 ultra here in Australia….

[@trebory6]

Pro tip: Use some UV Resin to fill in the Elegoo logo.

[@tedcogley1939]

Omg I want a new saturn

[@greendoorinvestments]

I hate the flip top lid I like that this one doesn't have it I wish it was an option

[@tyronebrewer3219]

Thanks for the info the Elegoo Mars 5 Ultra printer.

[@janineharris3601]

can i have this in a small apartment. do i need to have a mask on

[@UncleJessy]

If you can use the vent port to pipe fumes out a window. I wouldn’t recommend printing in the same room you sleep in / spend the most time in

[@LordNerfherder]

The drip tray does not work, it spills straight into the printers mechanisms and you need to pull it apart to clean it from uncured resin. There should be like a rubber gasket or something there. Biggest flaw probably.

[@UncleJessy]

the drip tray covers the vat /sides & gap. Unless you manage to spill resin under the drip tray somehow. But agreed that a gasket of somekind would be a nice addition to prevent potential spillage issues

[@sespider]

I only have one printer. The Mars 2 for $200 back in 2021. This looks to be the same size as the Mars 2. Someone, please, list the advantages this printer has over the M2. Because I'm not really seeing a need for it.

[@LyGuy13]

Print speed might be the only benefit for you?

[@haukke]

I just bought the Mars 4 like 6 weeks ago. I really wish they would tell you when you buy something that a new version is coming really soon and you shouls maybe wait.

[@johnathanriley188]

Im so sad. i just bought a Mars 3. i would have just saved my money cause all of the problems i have with the mars 3 this thing fixes so depressing

[@Travis-bg1fj]

So if you're using the exhaust port you can only move the lid as far as the exhaust hose? That's absolutely ridiculous and short-sighted.

[@UncleJessy]

Thats unfortunately how all lift away acrylic hoods work on printers. Some folks have made printable magnetic hose adapters so you can just snap it on it off when needed

[@DOGbackwardz]

I wouldn't recommend a 3" smaller printer with the same functions over $120. Particularly with just a 1x6um difference in pixel size. You lose out on too much print volume.

[@wojteklabuc]

Depending on what the owner needs - I don't need bigger volume. I'm upgrading diecast car models. Mostly 1:64 and 1:43 scale. Compact printer with great quality small prints with saving hundred euro is a deal which I'm very interested. You can't measure what other people need without knowing other people "metrics" and needs.

[@DOGbackwardz]

@@wojteklabuc You say it right there, mostly. Even knowing exactly what you're printing, you don't know exactly what you will want to print. What happens when you find the model that speaks so greatly to you that you want to scale up to 1:.32 or 1:.16. What happens when you want to introduce your friends to the hobby? Do you want to run 20 prints or do you want to run 4. If you know the limitations of such a small screen you will never recommend it to someone who doesn't. You also easily make that money back over time due to wear.

[@wojteklabuc]

@DOGbackwardz I don't print whole models. Only parts. And those even for large scale are small. And I don't need to "what if" because I know what I'm into. I don't buy it to impress friends or to introduce them to my hobby. I have very specific reason to buy 3d printer. And it won't change. Saving money and space is more important than potential for things I would not consider. And from real needs at large scale -details I will print rarely are still very limited in size. Biggest elements are wheels but those are small. And limited to 4-5 (if there is spare one visible). Even at 1:18 scale. And wheels are usually different for different car models. So no point in printing in larger numbers. And most important those prints will always be parts. Not a whole car. And it will never be more than 4 runs. With 1 run with different resin for tyres. Available volume won't affect neither QOL or labour/time in those rare situations when I would work on larger scale models. I'm doing my reaserch for weeks and videos like this cured me from thinking about bigger printers. Instead saved money will serve better if I spend it on small vacum former to make windscreens. My real needs > what I might or not need.

[@DOGbackwardz]

​@@wojteklabuc It's not saved money, it's delayed spending. The more runs the more ppe, the more fep usage, the more screen on time, increased labor time, and increased risk of failure.

[@wojteklabuc]

@@DOGbackwardz If you know better than me how often and what I will print...

[@peterdocter4659]

Great machines,dc on the back logical, wifi on the back logical, BUT WHY ALWAYS THE USB PORT ON THE BACK OR SIDE JUST PUT IT AT THE FRONT !!!! (Yes is know it's on the board there, but damn! how hard is it to design it to have the power switch and usb in the front!!!

[@onemansvideos2134]

vat dancer?

[@pipdesignshop]

I have an FDM printer for work and would probably use a resin printer for fun, so it’s nice to see the progress and increased ease of use. 👍

[@JellyGummy26]

Ive been wanting to get into resin printing for a couple years now but could never justify the price especially with canadian currency. But this printer is exactly what Ive been waiting for! It has all the features I want and is super affordable! I already pre-ordered it im super excited to receive it :D

[@kizen6664]

How is it???

[@dwilliams660]

I moved away from elegoo printers, I have the new Jupiter se, and had nothing but issues from day one, bought a uniformation and no issues from the start and the heated vat is a plus, maybe if they do a new Jupiter I may get that

[@ger5956]

I’m shocked you never heard about using a two step wash set up! It makes such a big difference in my experience. 😅

[@UncleJessy]

haha yeah i've definitely heard it before and used it somewhat in the past but man oh man does it work well

[@EricHernandez.]

I want see elegoo mars 5 a green

[@getbent57]

That Leonardo model turned out amazing.

[@UncleJessy]

Agreed! So happy with how it looks

[@RabbitBurrows]

Looks Turtletastic!

[@MonteMorast]

It is interesting that no one is mentioning how the titling vat is also in the Prusa resin printer. Waiting for my Saturn 4 ultra to ship to me. So excited about these printers. I might also get a Mars 5 ultra.

[@herbveitenhans3285]

I don’t have an issue with the ease of use for resin printers. My problem is disposal of the alcohol and residue from cleaning.

[@randompseudonym4519]

Use a high-quality water washable resin, like the nova3d mecha resin. It's strong and detailed enough for miniatures.

[@canalpan9]

Do you just dip it in the ipa for a second and dry it with towel ? .I would love to see how you do it. Thanks really you are great

[@PlasticGeek]

Yeah I had to break the rook on my first print to get it off, it was way too much exposure by default on those first layers

[@UncleJessy]

Yeah the “normal” exposure times are way too much for these new plates

[@RisingApe]

Great review, like the fast slow comparison, I didn’t do that in mine!

[@Vertrucio]

If you're careful, and don't want to bother with the bib, you can hold a tray between the print and base when removing stuff. I use a quarter aluminum baking sheet.

[@alexisjavier84]

All these printer for beginners videos never help actual beginners, i'm lost.

[@edwardnammur5962]

I don’t think this video tells the whole truth. I ordered one due to this video but cannot get a single print to work from this. I even had elegoo replace my system and I’m only getting soup. Might be Jesse a fraud or this printer just isn’t where it’s cracked up to be. Gonna be returning this soon and just quit on 3D printing overall. This is a horrible experience and I wasted so much time.

[@Lockhaim_]

This mug hit be a stupid question- but as someone who’s looking to buy their first 3D Printer and deciding between the Mars 5 Ultra or Saturn 4 Ultra- what happens if I have a model that’s only one file but it’s too big for my build plate? Am I able to cut up the model into separate pieces and then have my printer build like interlocking pieces into it or is that more advanced? I am wanting to get the Saturn but realistically without having ever tried 3d printing I was thinking the mars may be better especially since I’m looking for more like anime figure type models to paint- but if I wanted to do a larger model could I still do it even if it would take longer obviously by doing it in pieces?

[@gamer23xd91]

Totaly off topic but does anyone know if elegoo i working on a jupiter se2? I'm thinking about getting a Jupiter SE but would really hate to see an anouncement like a week later

[@UncleJessy]

I havent heard of a new version and the latest Jupiter I have on hand is the SE

[@OsoDeAnteojos]

Wow, you make resin 3D printing look so effortless! I haven’t checked if you have any videos with tips for easier printing, but my last attempt ended in a bit of a mess, and now my 3D printer is collecting dust on a shelf. Any advice would be greatly appreciated!

[@davidguzman9479]

I'm about to begin in the 3d printing area, I want to print dungeons and dragons minis, and Warhammer miniatures too, but I was wondering, is this printer any good for that? Also, I want to use some tough resin, I want it to be flexible so it can be resistant. Please help me :(

[@joerie.houthuijsen]

Hi Jessy, from who is that little baby Dino 🦖?😍

[@krugrodrigo]

Hi @UncleJessy, great video! I work for Loot Studios, right in front of the artist Luis Negão, who designed the little dinosaur his work is AMAZING. My favorite one so far! This is amazing!

[@luisnegrao4948]

Thank you so much my friend! It means a lot coming from you!!

[@dungeonsYdragons]

lol im still rocking my og mars pro thingiverse version i got for the same price years ago

[@UncleJessy]

Heck yeah! nothing wrong with that at all! Built like a tank

[@DevilsBrushGaming]

My ultra 4 broke on print 1 not only did the fep sheet get a hole in it but the plate got a crack in it. So upset email elegoo hopefully gets sorted soon. Shame as think all this new tech from elegoo looks amazing. Back to my saturn 2

[@Mrpancake72]

Mine won't print on the back half of thy plate so you are not alone

[@DevilsBrushGaming]

@@Mrpancake72 such a Shane hope elegoo gets it all fixed for you

[@anthonylong5870]

Im getting really worried if i am going to ever be able to print. I have the Mars 5 Ultra and only 1 time did it print right and that was the initial print of the rook. After that nothing prints, not even the rook again and i have changed nothing...not 1 setting. everything is failing and i only get a first layer of whatever model and its stuck to the fep. Thats its nothing else 9 attempts now. thinking maybe im not supposed to do resin printing

[@ANDELE3025]

>mars 4 regular 18 μm >mars 5 regular 35 μm M5 being 18e cheaper really doesnt make up for that gap, doing the same Nvidia marketing pull by making the Ultra the default.

[@OliPotts-q9g]

random question for anyone with a fdm printer I've had a lot of problems now it breaks when trying to start a print would love any advice

[@UncleJessy]

It could be that the filament is been sitting out in the air for too long, is it brittle before you load it into the printer?

[@photoshopguy44]

So been printing since I've gotten it- been hit or miss with prints and its not printing as it should out of the box. I'm seeing my prints sticking to the FEP film vat constantly. Any suggestions? Can you provide your print settings for this video?

[@areez110]

I want to get into resin printing do you know what I have to buy excluding the printer itself to get started?

[@DeadgstPersonal]

yo 3rd comment on video lets goo

[@greenbean_gb_]

Why does it say pre-order?

[@sharky2675]

jesus christ, stop with the uptalk, its so annoying

[@arduinotec9415]

Uncle, i live in Brazil. Can they sending these printers here???😢

[@sinakuma]

With the Saturn 4 Ultra, did you use fast speed or slow with your resin settings ?

[@UncleJessy]

Fast speed with the Saturn 4 Ultra

[@williammcpherron8111]

You can only run a max of eight of the same objects at once ?

[@andrewjeremy615]

damn ill trade my Saturn 4 for one if anyone has this one haha

[@jessemarshall7176]

I’m waiting for my Saturn 4 ultra to ship. It’s replacing my original mars pro printer

[@UncleJessy]

You're going to love it

[@jessemarshall7176]

@@UncleJessy I looks to be a great printer. Anything is better than my relic lol

[@jessemarshall7176]

@@UncleJessy I got the air filter with it too. Have you used it? My wife complains about the smell from my old one so it only gets used occasionally

[@theromeog]

Awwww. It’s a Mini bib. 😂😂😂

[@xile6]

here little bro you can copy my homework. lol...... But this is still cool That the Mars line got some love. One day i will get a Saturn Ultra. I do have a OG Mars and Saturn S. So far it all works for me. But some speed would be nice.

[@SuksesSmart]

I been wanting to buy one but I’m scared of the fumes, I don’t see a window on your video, how do you deal with all those fumes?

[@JoonKimDMD]

That is why so many people died or hospitalized.

[@IndianaDiy]

Awesome Printer! However the slicer beta crashes a lot and I wish the program ran smoother.

[@VGModelling]

My concern is if those new build plates will fit the Mercury washing machines?

[@fukyu2123]

Nice showcase of the features. What would you reccomend? Buying this Mars-5 Ultra or the slightly older and bigger Saturn-3 Ultra? Granted both cost the same

[@UncleJessy]

@@fukyu2123 mars 5 ultra. It’s so stupidly easy to print with. A really big improvement from other resin printers. If you need big, then the Saturn 3 ultra is still a great machine. But id pick the mars 5 ultra

[@Lychee3d]

Great review, like always 👌

[@benjamin93436]

Uncle Jessy. I currently have a Elegoo Saturn S, and looking at ordering the Elegoo Saturn 4. Would it be wise to wait and buy this one instead? My goal is to utilize a machine for miniatures and hopefully speed. I wanted to see what your suggestion would be for me.

[@janineharris3601]

do you have to wear a mask using this one

[@curlymustache9667]

Yes. Along with latex/nitrile gloves. The uncured, liquid resin is toxic and like other epoxy materials, you can develop an allergic reaction to the resin over time so it is best to avoid contact with it at all. You can get it on your skin and you won’t have any issues as long as you get it off, but over time you will develop a reaction until even the fumes will give you nasty rashes. So best to wear a mask and gloves to avoid getting to that point

[@KingUsyk]

what makes this beginners? i dont get it

[@orange3203]

Price and it just works

[@3DJapan]

I like that touch screen.

[@TsuyoShirts]

As someone searching for a beginner 3D Printer, I'm happy to see you were able to make larger figures using the Mars 5 Ultra. I want to make figures akin to Nendoroids which measure 4 inches tall.

[@PerryWheeler-x7i]

My S4 Ultra went back after a day. Error message after error message. Automatic bed leveling failed, then a message saying 'No resin detected' even though the vat was full of resin. I then Googled my issues and couldnt believe the amount of people experiencing the same errors. Just ordered another Saturn 3 Ultra, now that is a good machine!

[@luckimv]

As always, nice informative overview of this new printer. I went ahead, ordered one and it arrived yesterday. Can anyone comment on the temp sensor and where it is measuring? The output for mine is showing upwards of 43C during printing. I didn't think that could be correct but then I felt the sides of the printer and they are warmer than I expected. I'm coming from a Saturn, so I don't know if this is normal given the smaller footprint.

[@rickybell1101]

I'm in two minds, I am looking at the Saturn 4 and the mars 5 ultra. Need a bigger built plate. Not sure which one. I'm new to resin but do 3d print with my ender 3 neo. Please help I'm looking to do handhelds consoles. Unsure what to get. Thanks

[@Tryant69]

It's not really auto bed leveling though.. It uses springs under the build plate to basically always make it level when compressed but this does fuck up prints directly printed on the build surface because of too much pressure!

[@TanksWorkshopMinis]

I'm not worried about spills as much as moving parts. As in mechanical failure and/or maintenance.

[@LordOfJazz]

My Mars 3 Pro is still printing models like champ so I'll be skipping this one too. Though I do really love the new features.

[@pingbot261]

This would work great for me. I already ordered my S4u and its on its way haha. But the S4u is a dang bang for a buck. So is the M5U.

[@happy14945]

Did they get their quality control right this time? I love the mars 3 but it died on me. just as 3 cure and wash stations. i was always sent a new one... This is looking incredibly interesting to me..

[@peterdocter4659]

Driptray?! Just use aluminum foil! (get the sturdy type for better results!) Just a tip for all those thinking they might "need" one for their printer!

[@sirkingjamz101]

I was wondering what that sound was in the BG of the video, at first i thought it was a song... which it is! the Makers song, The bed slinger printing sound :)

[@scottlivingstone7670]

I am trying to track down how large the extraction port on the lid for this is. looking to get an extractor fan and tube/ if you have any recommendations I would appreciate it!

[@forrestegan]

There’s nothing on the Mars 5 Ultra that would get me to upgrade from my Mars 4 Ultra…I’m good, carry on. YMMV