PHOTO SUBLIMATION ON COTTON WITH DTF POWDER

[@CraftingwithDelonda]

Sublimation/DTF Hack: kzbin.info/www/bejne/e6GyZqWkbshro8U

[@pamelawilliams4535]

hi can you inbox me the steps for this process thanks

[@BlueBoxGirl1837]

How can you not love her!!!! Personality always on 💯

[@CraftingwithDelonda]

Thank you so much 😊

[@lindabradford9591]

So very true. I love watching her videos

[@CraftingwithDelonda]

Thank you

[@rebekahjohnson5248]

I 1000% agree! Her positivity and energy is so contagious!

[@kofaminc]

Totally agree

[@janet5666]

HI, Ms. Delonda I know this video is old but I had to comment, LOL. You had the right pic for this video, the one with the hammer. I just went through this crazyness. Let me tell you I finally had to slow down, I reflected on everything and at the same time I viewed some videos. Lord and behold I was able to do a few actions and it finally Worked. I have to say I didn't want to waste my clear DTF sheets so what I did , I cleaned it with paper towel and reused it until I can see Victory! because I was Oh, No it's not wasting my sheets. Anyhow it works and I saved my other sheets. Hopefully this works for others, also this usually happens when the internet goes down that's what I noticed so internet might need to be recollaborated or reset. TL Blessings In Jesus Name.

[@CraftingwithDelonda]

Thank you so much!

[@JustPassingBy_Yolo]

You're the type of person that U want as my teacher in school. Love the humor and personality. The whole vibe is great! Ty for sharing your information! ❤

[@janet5666]

Hi, Ms. Delonda Girl, I know this video is older but like I said I'm still trying to view many of your videos but they are all helpful in many ways. When I seen this one video, You sure hit it on the nail, it can become fustrating and believe me, I have gone down that same path as well. Always cutting off, lol and cricut sizes are not even close to the sizes we need but we try to make it work one way or another. You Get Us! Lol that's what is so wonderful about you. Thank You.

[@franceslove5461]

Delonda you are so thorough with your instructions. I'm totally lost when you go into design space and different folders and such. It has nothing to do with you, it's all me and my computer illiteracy. Thanks so much for sharing. 🥰

[@CraftingwithDelonda]

Hi there, check out this video on how to slow the video down. HELP!!! THE VIDEO IS GOING TOO FAST! kzbin.info/www/bejne/jZm3d5-MpdqHiK8

[@Catgirlforver6068]

Same

[@cynthiaandrews7353]

Me too 😊

[@henrietada]

What a Beautiful Family ❤

[@CraftingwithDelonda]

Thank you so much!

[@sharijohnson1873]

I love it! I absolutely love Myles’ smile! This picture is my favorite because everyone is smiling. Great job. ❤❤❤❤

[@CraftingwithDelonda]

Thank you ❤

[@XxLeo05xX]

I am a fan. Just converted my ET 8550. Your channel inspires me and my brand. Your knowledge and delivery is great. Lucky number 7.

[@CraftingwithDelonda]

Awesome! Thank you!

[@heidileibowitz718]

Thank you so much for showing that even experienced crafters like you don't have things come out perfect right away. I love your positive outlook and the encouragement you give.

[@CraftingwithDelonda]

Thank you ❤️

[@prosperity3845]

Thank you!! I really wanted to do DTF, but wasn't sure about using actual photos.

[@CraftingwithDelonda]

You're welcome

[@judywells4297]

I received a Epson Eco Tank Printer for Christmas and needed lots of help. After watching a few videos yours came up! Wow! I really enjoy your videos. Each one is so helpful and easy to understand. Thank you for all the work you put into your videos. You now have a faithful follower!! May God bless you.

[@CraftingwithDelonda]

Now you just blessed me! I really do appreciate that. Thank you very much and welcome aboard.

[@johnnyfudpucker6187]

I have a cheap epson 2720 and I have had absolutely 0 problems printing on film except a pizza roller mark every now and then. I love watching you do stuff, you seem so happy to be here .

[@CraftingwithDelonda]

Thank you ❤️

[@MrRenoman2011]

Another awesome video. You have a beautiful family. Thanks Much

[@kelliestevens1031]

I am so amazed that you can do this on cotton. Looks great

[@CraftingwithDelonda]

Thank you!

[@tigeryorkie07]

Delonda.... You rock girl! 🤘

[@CraftingwithDelonda]

Thank you ❤️

[@victoriabostick7684]

The process works well. Nice to have options. Thanks for sharing💜

[@CraftingwithDelonda]

Thanks for watching!

[@TeishaGibson-p3n]

Thank you for this video, very informative and clear! You made it possible for me to actually want to take my epson 2850 out the box tomorrow and start using it. Thank you so much for educating me on how to do this hack. You are the best

[@lepreechad6160]

I absolutely love love loveeeeeeeee your videos! So informative and you are so pleasant 💃🏽💃🏽❤️

[@CraftingwithDelonda]

Thank you so much 😊

[@judybarrett2697]

The streaks look for them before putting on your shirt. Use a tool of your choice to scratch it off the film then press. Hope this helps.

[@CraftingwithDelonda]

Thank you! I will remember that!

[@Craftybowladychannel]

I love your personality and you're so inspiring 💗

[@CraftingwithDelonda]

Thank you so much!!

[@scottyj1643]

Beautiful family. This a great idea for clothing or whatever.

[@CraftingwithDelonda]

Thank you ❤️

[@Luxinda]

Omg, yes!!! My sub printer cut off my images on the DTF film over and over. And what was even stranger was the printer sounded like it was printing the entire image! I still don’t understand what happened… 🤷‍♀️ I guess I’m relieved to know it wasn’t just me…? Love your videos!

[@CraftingwithDelonda]

Thank you so much 😊

[@josielevy4184]

I love your tutorials. The way you talk makes me forget I’m watching a video. Sometimes I’ll be nodding my head, and talking to the screen as if you could hear me 😂. Thanks for sharing your knowledge.

[@lindabradford9591]

Lol. So cute. Delonda is the most delightful person.

[@CraftingwithDelonda]

Thank you so much!

[@vedaclark8421]

So happy I found your site . Finally understanding how this works . Thanks for sharing .

[@CraftingwithDelonda]

Thanks for watching!

[@merediths9698]

Can’t wait to try this again!!! The gnomes from last time worked out really well even after multiple washes and drying

[@merediths9698]

All that work in canva has me nervous 😅

[@CraftingwithDelonda]

You can do it!

[@patriciasimon9132]

I found that taping my transfer to a piece of sublimation paper and it worked great!

[@CraftingwithDelonda]

Thanks for the tip.

[@MyNitab]

I just purchased a htvront heat press my upgrade from cricut heat press I'm looking forward to dts using ink jet printer Delonda you are very good at tutorials 😊

[@CraftingwithDelonda]

Thank you ❤️

[@marisolgonzalez5244]

I love your videos, to the point, well explained. You’re also gorgeous!!! Thank you!!

[@CraftingwithDelonda]

Awe, thank you so much 😊

[@ruthybarretta7955]

What a beautiful family

[@CraftingwithDelonda]

Thank you 😊

[@greggouveia5243]

Have had no luck 9n dark shirts. Seams to be like sublimation printing, only on light colors, and thoughts. I still use ppd dark heat transfer paper for darks.

[@CraftingwithDelonda]

I love the PPD but I also love Siser EasyColor DTV. This process is not intended for dark fabric.

[@tiffanysimmons3791]

I’m so glad I found your channel ❤you are pretty awesome!

[@CraftingwithDelonda]

Thank you 😊

[@ibafroglover]

I just love your intro thanks for sticking it out to bring us this tutorial.

[@CraftingwithDelonda]

You're very welcome ❤️

[@thomasj1454]

Thanks for your video, I look forward to trying this method sometime. May I suggest a shaker container for the powder such as one found at a pizza establishment for extra parmesan cheese or red pepper.

[@CraftingwithDelonda]

That’s a great idea!

[@lindabradford9591]

Such a beautiful print on that shirt.

[@CraftingwithDelonda]

Thank you!

[@heatherkarow8399]

I love your personality!!! You are so fun & so real!!!!

[@CraftingwithDelonda]

Thank you!

[@darleneberry4753]

I love the shirts! I would say the white cotton shirt line down the middle looks like a double center crease line. Overall, I love them!

[@CraftingwithDelonda]

Thank you!

[@sandrag7172]

Such a sweet personality! You got your self a new follower.

[@CraftingwithDelonda]

Thank you so much and welcome aboard 😊

[@tearodriguez8184]

Absolutely love your tutorials! I’m a newbie 😊

[@CraftingwithDelonda]

Thank you so much 😊

[@dellabrown8119]

I sooo love your video!!!!!!!

[@CraftingwithDelonda]

Thank you 😊

[@bevg806]

I love your tutorials and I have learned so much! Thank you!

[@CraftingwithDelonda]

Thank you so much for watching 💙

[@ruthybarretta7955]

Thank you

[@CraftingwithDelonda]

You’re very welcome

[@kathyhanusa8956]

Beautiful family ❤ Thanks for another great video.

[@CraftingwithDelonda]

Thank you very much!

[@MyNitab]

Love your personality

[@CraftingwithDelonda]

Thank you ❤️

[@Marpr33]

👍💐 Love it!,... Happy Holidays!,..

[@CraftingwithDelonda]

Thank you!

[@Peedee3030]

I love it...I love it...Happy New Year to you and your family

[@CraftingwithDelonda]

Thank you so much!

[@brendalatson9265]

This is nice!!!! I have trouble with the heating smh

[@CraftingwithDelonda]

Thanks! What are you having trouble with?

[@brendalatson9265]

@@CraftingwithDelonda with heating the powder on the paper. 😔

[@lakeishahale2075]

Yes , that was apart of my problems when I did my first one and I got that 1 done and have not done anymore yet🤣🤣🤣

[@CraftingwithDelonda]

I understand. It’s very frustrating.

[@aliciabartholomew5871]

Yes will be ready

[@CraftingwithDelonda]

Thank you ❤

[@goodvibes04281]

Love Love your tutorials! So the only way to do sublimation on a black shirt I have to use that powder?

[@CraftingwithDelonda]

You can use clear htv kzbin.info/www/bejne/oZaaY4eEeNmnedE

[@marilyntipton3153]

Came out pretty good.. considering you went through multiple sheets.. I think I need to try a different powder.. I see most getting good results with Yalmation

[@CraftingwithDelonda]

Give it a try and see if it works better.

[@maggyt5605]

It looks great. But I have a question, why don't you print when you downloaded from Canva? Why do you print from Doc ?

[@CraftingwithDelonda]

Because I don’t know how to get the sizing right. Also, you really can’t print from Canva. You have to download and print from a program.

[@alittleofeverythingsantos7608]

I love your videos. I starting todo sublimation. You’re tutorials are really good.

[@CraftingwithDelonda]

Awesome! Thank you!

[@mprez5271]

Thank you for this tutorial. I have tried sublimating on 100% cotton and had a hard time getting a good image or transfer. I still don't know what I am doing wrong. 😔

[@CraftingwithDelonda]

You're very welcome. It doesn't mean that you are doing anything wrong.

[@melydiaz9525]

Hi love your tutorials happy I found your channel. question can that be done on black cotton t shirt?

[@CraftingwithDelonda]

Thank you for joining us! Not this method, but I will post a link to a different method that will work on black cotton.

[@michellehawkins4616]

I just found you this morning and so glad I did, you are so helpful! This is the 3rd video I'm watching. Thank you, and subscribed!😊

[@CraftingwithDelonda]

Thank you very much and welcome aboard!

[@lynnebizlyne436]

Well yours turned out great! I tried it a second and 3rd time and I am not having the same success as you do. It must be the product I purchased is not as good as yours. The second attempt I could barely get the carrier sheet off the shirt which was alarming. My 3rd attempt, I used a smaller picture, the peel was still difficult but I did get it off the shirt and it looked ‘ok’ but not vibrant as the first one but at least the carrier sheet came off the shirt. Lol I saw another video tutorial and that person said his success was doing a Hot peel. I guess I will try that on the same shirt since it is now an ‘experiment’ only shirt. Lol I’ll post back and let you know how that went ❤

[@CraftingwithDelonda]

Please keep me updated. I know it can be frustrating.

[@lynnebizlyne436]

@@CraftingwithDelonda Hi Delonda, I tried this DTF stuff 4 more times this evening following you step by step exactly. The 2nd time I altered to cold peel which the colors were coming off and leaving a not too cool picture. 3rd time I tried a hot peel which did come off easier but the color came up the same as the warm and cold peels. Now on the 4th time I used a completely different shirt figuring MAYBE that was part of the problem. Sigh, the picture and colors looked absolutely great until the peel part. I did a hot peel, which worked best to remove carrier, but the colors still pulled up and looked like I had colored with a crayon on rough paper. I also did a second press 15 secs with parchment paper (as some people said that may help) but it didn't change anything. I am totally clueless as to why this isn't working for me. It never cures to a darker color. Using it straight from the dusting to pressing doesn't work either. I was told I didn't need to cure it but that had the same results. I can only assume it's the product. NGOODIEZ Transfer adhesive powder. If anyone reads this that uses the product please leave me a tip as to how you get it work right. I would be most grateful for the assistance. As for now I am guessing I have a bad batch. Love your tutorials Delonda. 🙂 I just joined your FB group. 🙂

[@CraftingwithDelonda]

Thank you so much ❤️ I'm not sure about that brand, hopefully someone will chime in. Are you using a sublimation printer?

[@lynnebizlyne436]

@@CraftingwithDelonda yes I have a sublimation printer. I will post in the fb group tomorrow and see if anyone else has any suggestions too. Thank you 😊

[@DawnsWorld79]

Delonda, Happy New Year have a Safe and Blessed one. I was wondering if you could do a project on decorating our CRICUTS. I love how urs is decorated and maybe in future videos would it be possible to do a video short of the upcoming project and the the supplies needed so that we can hopefully follow along when the video airs. thank you for being you. I love it.

[@CraftingwithDelonda]

That's a great idea! Here is the tutorial on how to do the stickers that I have on my Cricut Maker kzbin.info/www/bejne/jGOUqnuir9FrjdU Here is the one that I did for my EA2 kzbin.info/www/bejne/e3epkJZrpr5ogsk

[@DawnsWorld79]

@@CraftingwithDelonda omg that’s sooo awesome and thank you I’ve been watching you for awhile and love when you go live, life happens and it tickles me your channel is just so fun . I need this in my life it makes my day. Continued Blessings to you. Continue to be G R E A T.!!!

[@lasaventurasdeyerivlogs6767]

I love it how you teach us thank you so much

[@CraftingwithDelonda]

You're very welcome ❤️

[@KristenCenci]

Another great tutorial. Thanks. I still don’t understand what the density does for the color. Is using word for printing just a personal preference?

[@CraftingwithDelonda]

Thank you! Yes, using Word is a personal preference because I just know how to use it so well. I have compared prints in Word and in Inkscape and I can see that the print is definitely more vibrant in Inkscape; but I don't feel like I understand it enough.

[@rosagarza9586]

They look awesome, thanks for tutorial

[@CraftingwithDelonda]

Thank you so much!

[@mariasanchez683]

How does this hold up after washing? I'm excited to try it.

[@CraftingwithDelonda]

kzbin.info/www/bejne/j4fNg5pqqpyDZsU

[@inaedemarughu8275]

Happy holidays to you and your family! Literally just purchased an Ecotank 2803, mug press, hat press and my sublimation sheets. Been doing vinyl for a long time and wanted to expand my ability to create. Thanks for your tutorials.

[@CraftingwithDelonda]

Happy holidays and that is awesome!

[@Bere1311]

First of all love your videos very clear instructions and easy to follow! Question: Does this process only work for light color shirts? Just normal color range you would use for sublimation?

[@CraftingwithDelonda]

Thank you! I suggest only using light colored shirts. I am so sorry for just responding.

[@silinaw2211]

Hey there, I saw where you changed your printer settings in a video. I’m using at f170 would u happen to know what paper setting I should choose. There is only DS transfer rigid and Ds transfer textile…

[@MichelleRohlfing]

Great video and wonderful shirt! But how did you do white lettering when sublimation doesn't print white?

[@CraftingwithDelonda]

It's really just showing the color of the background. One of my daughters is wearing white shoes but they didn't show up.

[@janet5666]

Hi Mrs. Delonda Pray your having a marvelous day, I was viewing some of your videos with the powder and DTF and for some reason I can't come across Siser DTF that you used on one of the videos that I can see. Also the reason I ask is because I am really interested in the powder and DTF film. I seen some on Amazon but does it matter what powder is used with the DTF sheets? I guess what I am trying to ask is do we have to use the same DTF company with the same DTF company or can it be mixed? hope I didn't confuse you. Also any DTF preferences? Hope I didn't ask too much lol. Your the Best , Thank you. Hope your mothers day was blessed.

[@CraftingwithDelonda]

Thanks! In my opinion, it is better to order DTF transfers instead of trying to figure out this process for yourself. Check out Atlanta Vinyl, they have a ton of high quality DTF prints.

[@janet5666]

I Love that shirt with Libra on it, Lol I'm a Libra as well. 👍

[@trinityinnovations]

Thank you as always sis, I Love it!

[@CraftingwithDelonda]

You are so welcome

[@julieburch2536]

wow this is great, thank you for the video. Will you be doing a wash test on these ones too?

[@CraftingwithDelonda]

Thank you! Yes, I definitely will.

[@makingnewdreamscometrue]

Recently subscribed but didn't have notification on. Fixed that. Great tutorial.

[@CraftingwithDelonda]

Awesome, thank you!

[@sweete64133]

Hi I love your videos. I have a question.. I have an Epson wf7720 I printed an image a few days ago and it came out perfect.. today all of my images have either a black streak straight down the middle or several.. they don’t look like roller marks .. but streaks. Like too much ink. I’ve reduced the saturation and same result. Do you know anything that can help?

[@CraftingwithDelonda]

Try reducing the density to -10 the way that I demonstrated.

[@kreatedbylola]

Thank you for the tutorial! Very well explained. Especially since I don't have a heat press only an easy press. Now i know I can try it😅😅 My bank account is not going to be very happy 🤣🤣🤣 I want to try it all! Thank you again!

[@CraftingwithDelonda]

You are so welcome!

[@thecraftedmind1735]

Love the family photo!

[@CraftingwithDelonda]

Thank you ❤

[@vivianbridges1309]

I love this! However, it won’t work of large size shirts, because the DTF only comes in 8 1/2 x 11, right?

[@CraftingwithDelonda]

I think other companies sell larger film. I haven’t tried it.

[@ingridwilkins3886]

I love it too, but I am new to sublimation so can you enlighten me on the hack what is it is in the powder if you did not use the powder than what?

[@CraftingwithDelonda]

Thank you! Are you asking if it is possible to sub on cotton with a different process?

[@ingridwilkins3886]

@@CraftingwithDelonda i do not know what I am asking by me being new I have not learned how to formulate questions yet so is it because you were using cotton the reason you used the powder

[@CraftingwithDelonda]

I totally understand what you’re saying. I remember asking questions and not really knowing how to explain what I was asking. So, sublimation is really intended to be used on polyester. The purpose of this hack is to use sublimation ink on cotton. Have you joined my Facebook group? It was created for Cricut Beginners.

[@morgandyson9700]

I’m sorry if I missed it in the video but why couldn’t you print directly from Canva instead of going to Microsoft Word?

[@CraftingwithDelonda]

It's a matter of personal preference.

[@cynthiaandrews7353]

I just love you and your videos 😍

[@CraftingwithDelonda]

Thank you very much ❤

[@patholloway2305]

Hi Delonda, thank you once again for sharing these videos with us. I would really love to try the dtf hack. But no matter what i do my printer will not print. I have tried so many different films and i am ready to throw my printer out the window...lol I have the same printer you have and for the life of me I don't understand how you can print and I can't. I have the Epson ET 2760, which i have converted into a sublimation printer. If you or anyone else have any suggestions I am all ears...Help!!!

[@CraftingwithDelonda]

Hi Pat, have tried stacking the paper behind it?

[@secondchancechurchofdelive7695]

Delonda, I like this! in what store did you find the baseball shirts?

[@CraftingwithDelonda]

I actually purchased them from Hobby Lobby. I didn’t find any similar ones on Amazon.

[@secondchancechurchofdelive7695]

@@CraftingwithDelonda Thank you!

[@MyNitab]

I have cricut joy and scan n cut cutter which I love Any scan n cut users out there holla

[@CraftingwithDelonda]

❤

[@GodsAngel0519]

Can this be done on a black shirt?

[@irisrussell6180]

I have the Espon Eco Tank 4760 will this printer work also. I have converted it over to sublimation.

[@CraftingwithDelonda]

Yes! It should work

[@shawnbrunson1871]

Dope🔥. . . Does dis hold up after washing?

[@CraftingwithDelonda]

Thank you! I haven't washed this one; but here is the update on another one I did. kzbin.info/www/bejne/j4fNg5pqqpyDZsU

[@sugafoot138]

Ok I’m ready

[@CraftingwithDelonda]

Thank you ❤

[@joyscranfield5527]

Fantastic job!

[@CraftingwithDelonda]

Thank you ❤

[@laverngordon]

You are truly patient cuz I'd blow a fuse n break sumn

[@CraftingwithDelonda]

Oh trust me, it turns into hammer time sometimes!

[@lindabradford9591]

No breaking allowed

[@CraftingwithDelonda]

I have to remind myself

[@jacquelinewhite2918]

You are awesome ❤

[@CraftingwithDelonda]

Thank you

[@denisemcgunia3696]

Love her she is wonderful

[@CraftingwithDelonda]

Thank you so much ❤

[@wandamayes3240]

Loved the video, very helpful

[@CraftingwithDelonda]

Thank you 😊

[@blingbombvault]

i love your videos and you thank you so much

[@CraftingwithDelonda]

Thank you!

[@jeffreyr538]

Hi I have a question. How did you get the white ink to print being sublimation. Sublimation printers dont print white ink.

[@CraftingwithDelonda]

This image doesn't have any white ink. In the original photo, my daughter is wearing white shoes but in this photo it looks like her feet aren't in the picture.

[@dorietyson9038]

Ok so, I’m having the issues you had on the white shirt. It seems to come out spotty. Is that do to not having enough pressure?

[@CraftingwithDelonda]

Oh no, I'm not sure. What heat press do you have?

[@audra7]

Hello Delonda, how do you get the white when on this DTF method using regular 4 color sublimation printer? I have a Sawgrass.

[@CraftingwithDelonda]

There isn’t any white in my image. One of my daughters is wearing white shoes in the original image but they don’t show up here.

[@starnyalamarr208]

Is DTF better than clear htv vinyl for photos?

[@CraftingwithDelonda]

That's actually a great question! I haven't tried using clear HTV with a photo.

[@Angel-TCCrafts2]

I love it. Like always it turned out perfect❤

[@CraftingwithDelonda]

Thank you 😊

[@Angel-TCCrafts2]

@@CraftingwithDelonda your welcome beautiful lady ☺️

[@jessiegibson9023]

Good video thanks looks good ❤

[@CraftingwithDelonda]

Thank you too

[@keesha8469]

So do you suggest a poly blend vs a 100% cotton?

[@CraftingwithDelonda]

That's personal preference.

[@sheridawilliams2591]

I have Epson 7720 printer that I converted to sublimation. Will the powder work for it?

[@CraftingwithDelonda]

Yes!

[@cutflower36]

How do they hold up after washing?

[@CraftingwithDelonda]

Very well. There should be a wash update pinned to the top.

[@bobslfcu773]

Nice video. Haven't had that problem with printing but get roller marks with the black ink quite often. Do you have any suggestions on how to fix that? Thanx for the info.

[@CraftingwithDelonda]

Have you tried decreasing the density in the extended settings?

[@bobslfcu773]

@@CraftingwithDelonda It seems to have helped to reduce the density but I now think that a lot of the problem is the printer. It doesn't;t feed from the back, just the front cassette. so, plan B I guess. Thanx for all the suggestions and other videos.

[@bobslfcu773]

"I QUIT"

[@CraftingwithDelonda]

Noooooooo