Pinball Tech 101 - DOF / Pinscape software setup

[@ScottBlenkhorne]

That's fantastic. Thanks Sergio. My shaker motor just arrived so this will be really helpful in getting it hooked up! Cheers!

[@RastanPinball]

Good tutorial Sergio. Wish I had something like this back when I was building my cab. Very daunting and confusing if you don’t know what you are doing but fairly easy once you understand it.

[@2104doug]

Thanks PFG for video on DOF/Pinscape software setup and the link.

[@cleetusvandame]

Thanks for watching Doug. Hope you found it helpful.

[@2104doug]

I forgot to tell you that I had to turn up my volume all the way to hear you good.

[@cleetusvandame]

@@2104doug noted. I'll move the mic a little closer next time

[@dizzykillteam]

Thanks for your video, great guide for me

[@rodrigoayalaolivas8980]

hola una consulta ise todo lo del video pero no puedo hacer que funcionen los selenoides en conjunto a los botones

[@dougpw]

I cant get my DOF working with my pinscape. When i set my active low ports to on, my shaker stays on. so do my solenoids when i power the machine on after being off. they just fire repeatedly.

[@rein3751]

Thanks again, it was very helpful.

[@cleetusvandame]

My pleasure 🙂

[@arfadifadhilaahsan9290]

hello i am a beginner i want to make a virtual pinball if i want to buy pinscape kl25z is it already with the usb cable

[@rein3751]

Hi Sergio, it has been a while, sinds i said im going to try to connect the solenoids with the kl-shield. i did it then, but i just couldn't find out witch port from pinscape is the port on my kl-shield. So i feld myself stupid, and didnt want to go further anymore. Sinds a week ago, i looked at the Arnoz older shields, and then i saw it. On the older shields, the ports are written PTE1, like you find it in the pinscape program. But on the kl-shield V5.1 you only see E1, so you have to put PT in your mind for every port on the kl-shield. And then you will know witch ports you need to connect with the pinscape. Hopefuly i helped someone else with this problem. :)

[@garrettspencer3887]

Good vid just supported you

[@cleetusvandame]

Thank you Garrett. Appreciate the support and you watching it. Glad you found it helpful 🙂