30+ Easy Truck Upgrades | Ford F150

[@fernee909]

Great video bro !!! You have some ideas for my truck 👍🏼

[@MagargeeFilms]

Awesome! Glad I could help! I’d love to see what you do to yours!!

[@MagargeeFilms]

Please subscribe! would love the support!! :)

[@karateflix]

Can’t remember the last time I watched an entire 23 minute video. I watched from start to finish. Good video. Gave me the antenna idea. Literally ordering right now as I watch from Amazon. lol.

[@MagargeeFilms]

Im glad you enjoyed the video! Check out my other videos for more F150 Content!

[@GloriousLuke]

just turned 17 bought my dads 2018 F-150 XLT off of him thanks for the ideas!

[@MagargeeFilms]

You’re welcome! Glad you enjoyed the video!!

[@Rooster1020]

I just bought my first truck, a 2017 ford f 150 xl, this video helped allot with some ideas. For me so fat I've put in led interior lights, then a gas cap sticker, and a talgaite sticker. Thanks for the awesome ideas! hopefully my truck will look as nice as this one someday!!! Thanks!!!!

[@MagargeeFilms]

Congrats on the new truck! Glad this video gave you some ideas! Please subscribe! I’d love your support! 🙌🏽

[@elijahclark6093]

The lights under the hood really got me. Those were an awesome idea

[@MagargeeFilms]

Thanks! They’ve come in handy a few times!!

[@MagargeeFilms]

Please subscribe! would love the support!! :)

[@johnnygarza8113]

There is a connection under the steering column that would eliminate the start/stop feature. Just unplug it.

[@petewardrope6524]

That works great until you need to tow something and spend 2 hours trouble shooting why your lights on the trailer don't work. Not that I learned this the hard way.

[@arothko8939]

I found that if I lightly hold brake when at a stop the engine does not cut off. When I push down firmly it cuts off.

[@CrunchDramaNetwork]

I have a button for that

[@billrook6165]

I installed a 4D TECH Start/Stop Eliminator on my 2020 F-150 5.0L today. Turn key to "ACC", plug the unit into the OBD-II port, start the truck, and the "A" button reads, "OFF" every time. No more engine shutdowns at stop lights. I love it!

[@babbagaboosh1]

@@billrook6165that’s awesome! has it given you a check engine light since?

[@dansievers5915]

Black and white, eah. Love the Stormtrooper look. 👍👍👍

[@MagargeeFilms]

Thanks!!! 🙌🏽

[@brianheikes1025]

I installed the SeaLight led high, low, and fogs. I also installed switchback led turn signals. They are a amber turn signal but the switch to a day time running light when the turn signal cancels. They really add to the amount of light at the front of the truck.

[@MagargeeFilms]

@@brianheikes1025 very nice!!

[@werdnaxela9553]

I have a 2015 F-150 Lariat. It’s certainly the little details that catch people’s eye. You made your truck look another trim, or 2, better.

[@MagargeeFilms]

Thank you!!! I’m super happy with the XLT trim! I just wanted to personalize it to me! 😊

[@audreyblackmon8413]

I have 2015 lariate lifted

[@Youtubeuser1aa]

What is the best looking trim

[@co5bass5]

Plasti-dip is great stuff. I did my badges and rims on my '09 and it turned out nice. Just bought a '14 FX4 5.0 that'll be getting that treatment, this week.

[@MagargeeFilms]

Yes it is! Love that stuff! 🙌🏽

[@Pope_Moose]

This really Informative, I wanted to do more to my ‘17 and I didn’t want to break the bank yet! Thank you so much!

[@MagargeeFilms]

Thanks for the love!! Yeah I think I’m total, the upgrades were close to $3,500. I didn’t do them all at once. This is over the course of a year 👍🏼 Progress, little by little.

[@MagargeeFilms]

Please subscribe! would love the support!! :)

[@MichaelMiller-j7n]

Awesome truck my guy like the upgrade since I’m 22 and buying my first Ford f150 this will really be a huge upgrade to my truck!

[@MagargeeFilms]

@@MichaelMiller-j7n Sweet man! Congrats!!!

[@imitationreality]

Catch can is a great mod but it has more to do with direct injection than the turbos. The valves get gummed up otherwise and keeping the turbos cleaner is just a bonus.

[@hello-qd8rf]

nice truck I have a 17 f160 eco i took the lic place out and put a grill becuase of airflow to the intercooler lower my temp by about 5 degree

[@exception2]

You have a 2WD truck. And you have a 4WD selector knob at 18:53 (right below left vent)? Mine is the coin tray of shame there.

[@MagargeeFilms]

@@exception2 that’s actually just a knob for the diff locker. No 4wd option on it

[@Travis456ify]

With the tail lights/blinkers, you need to splice in a resistor to the new LED lights. LED's consume a lot less power so they flicker twice as fast when you don't have a resistor wired in. I've done it several times. RIP Ken Block

[@MagargeeFilms]

You’re absolutely right! I got new taillights a while ago that came with built in resistors. Check out the video. kzbin.info/www/bejne/l3eon4iBr555gdE RIP Ken Block ❤️

[@rickeyb450]

Great looking truck, love the storm trooper look. I suggest you give Forscan a try. You could of disabled auto start/stop from the truck’s ECM. Also disable hyper flash on your tail lights and a bunch of other mods. KZbin it bru, you will love it.

[@MagargeeFilms]

Thank you!! Oh really?!?! That would be pretty cool! I’ll look into in! Thanks!

[@MagargeeFilms]

Please subscribe! would love the support!! :)

[@kinghernandez1453]

@Freund I’ve played with it and got it down to just 3chime when door open can’t seem to get it

[@dg2015]

Good video. I have been told by some mechanics that if you have 2020 or newer you don't need a catch-can because they fixed the issue. The start/stop, you just need to unplug it under the steering wheel and that will prevent the truck from auto-turning off.

[@MagargeeFilms]

Very Cool! Glad they fixed those issues!

[@davidfaumuina9866]

Actually it started with the 2018 model F-150

[@BronzeRook]

Great upgrades and they seem somewhat simple to do. I don’t have an F150 yet but already have my eye on a 2017. More videos like this one would be great.

[@MagargeeFilms]

Thanks! Yes! Super simple and affordable. Obviously you could go crazy but these are a good start. What kind of videos would you like to see?

[@BronzeRook]

@@MagargeeFilms it would be great to see top 5 things you like about your truck/ top 5 things you don’t like. Also what are the next mods you have in mind? Talk about how’s fuel consumption?

[@MagargeeFilms]

@@BronzeRook Great suggestions!!! Id love to make those videos soon!!

[@MagargeeFilms]

Please subscribe! would love the support!! :)

[@toilettkillerr5313]

I definitely agree with you about the 33s and leveling kit riding smoother. Maybe because it absorbs more of the bumps? Great Video!

[@MagargeeFilms]

I think so too!!! Glad you enjoyed it! 🙏🏽

[@Racered550]

I have a 2017 XLT FX4. It has stock 20 inch wheels on it. It is not level or lifted. Can I put 33s on it and not rub? Please advise

[@javennavarro-m7c]

@@Racered550lmk did it work I have the same truck and thought about do the same thing but didn’t know if it would rub or hit on bumbs

[@DavidJohnson0708]

Great video bro! Love seeing everything that you've done with your truck! You gave me a few ideas as well. Love the white and black. Reminds me of my old truck.

[@MagargeeFilms]

Thanks! Glad it inspired you!!

[@1AbominAble1]

Good stuff! First time I’ve seen new ideas for the 150 in a while. I may do the under hood lights

[@MagargeeFilms]

Thanks for the love! I love the under hood lights! So convenient 👌🏽

[@MagargeeFilms]

Please subscribe! would love the support!! :)

[@mlangfordoutdoor]

I like the Coast guard stripes

[@AverageJoe727]

Nice find on the retractable sunshade. That thing is awesome as well as your other mods!

[@MagargeeFilms]

Thank you! I have the retractable sun shade in all my vehicles! Dash Designs The Shade Retractable Windshield Sunshade, 23" (SV03) www.amazon.com/dp/B01MUBQWHG/ref=cm_sw_r_cp_api_glt_fabc_CRNVMZCTBJXVDSCMA2HS

[@andrewvalenzano3257]

Can you please tell me the model number of the retractable sun shade

[@MagargeeFilms]

@@andrewvalenzano3257 I have the retractable sun shade in all my vehicles! Dash Designs The Shade Retractable Windshield Sunshade, 23" (SV03) www.amazon.com/dp/B01MUBQWHG/ref=cm_sw_r_cp_api_glt_fabc_CRNVMZCTBJXVDSCMA2HS

[@MagargeeFilms]

Please subscribe! would love the support!! :)

[@zachb86]

Thanks for the video. New subscriber. Picked up my 2023 a month ago. Installed an s&b intake, mbrp exhaust and did the cheap vta blow off mod lol. Also added illuminated door sils, interior lighting, underglow and a few others from f150 leds. I really enjoy seeing what others do for their builds. Thanks again

[@MagargeeFilms]

Sweet mods! Congrats on the new truck!! Glad you enjoyed the video!

[@davidryan45]

That connector also applies power for your trailer backup assit.

[@brianheikes1025]

Mine hyper flash inside the truck but outside the lights flash the same as stock incandescent bulb.

[@arizonacolour8793]

You should add these: - rwd rear shocks (Rancho or Eibach) - proper rwd coilover leveling kit (Eibach or Elka) - sway bar (less body roll) - upgraded brake rotors - painted brake calipers - cold air intake - exhaust - body color mirror caps - bed cover - center armrest cover - painted air vent trim and paint correction detail (remove those swirl marks, maybe add a ceramic coating too)

[@MagargeeFilms]

Love it!! Thanks for the suggestions!!

[@Racered550]

Add tow mirrors too. Took me 15 minutes to swap. Easy plug and play

[@m.quintana4498]

Nice truck. FYI all you need for the led blinker is an led flasher. You can pretty much buy them anywhere now.

[@danielrichardson4944]

Sorry, too lazy to read through the comments to see if this has already been said, but: Doesn't that LED light bar on the front bumper interfere/restrict the airflow to the intercooler? (I have an EcoBoost and was under the impression that should be an open airway for the most part)

[@MagargeeFilms]

It doesn’t not cause airflow problems. Ford sells these truck from the dealership with a license plate covering that hole anyways.

[@19baitmaster51]

Top loader safe in bottom of my console. 4 button pushes, and i'm in it. Anything of value goes in it, including any truck paper work.

[@romarro4616]

just installed a 2” leveling kit and it does ride a lot better same 33” tires

[@MagargeeFilms]

Nice man! Glad to hear it

[@domingoperezesparra2948]

Cool. I like very much your upgrades.

[@MagargeeFilms]

Thanks! Glad you enjoyed it!

[@cigfighter9]

Good video, i was expecting 4 or 5 but you kept going with many good mods!

[@MagargeeFilms]

Haha glad you enjoyed it! Please subscribe! I’d appreciate the support 🙏🏽

[@NO_vidoes]

in a few years you can take off the 3m tape on the sides and you'll have a ghosted white stripes. nice clean looking truck

[@MagargeeFilms]

Haha that would be cool!!!

[@termiteous]

Didn’t see the mud flap link. Can you provide that?

[@MagargeeFilms]

Be sure the check whether you have a trim on your fender or not Teccom Mud Flaps Splash Guards for 2015-2019 Ford F150 2015-2019 with Wheel Lip Molding Front and Rear 4psc Set ABS Molded www.amazon.com/dp/B07Z1K1RJ6/ref=cm_sw_r_cp_apip_IFHKqBlpERDUd

[@TheJohnpauljean]

Is the light bar infront of the intercooler blocking air for the turbos?

[@MagargeeFilms]

The light bar is in front of the intercooler but there’s plenty of room for air so get in still. Never had an overheating issue (knock on wood)

[@richarde735]

auto stop / start can be tweaked in forscan

[@funtimesusa6199]

I hate Ford trucks, but gotta say that you did excellent. I would own that truck. Nice job bro

[@MagargeeFilms]

Thank you! Hahaha Just out of curiosity, what do you hate about Ford? (I drove a Silverado for 8 years)

[@seabass6171]

Nice truck and great upgrades. Thanks for sharing!!

[@MagargeeFilms]

Thank you! Glad you enjoyed!

[@jordan49806]

Great idea with the hood lights

[@MagargeeFilms]

Those are my fav! I actually use those lights everywhere! I just installed some as dome lights in my yxz1000r

[@ricardolafont7148]

Where did you get the blacked out F150 emblems?

[@MagargeeFilms]

Amazon!! amzn.to/3xCVriX Please subscribe! I would appreciate the support! :)

[@ceceliaanstead4942]

Wow!! Thanks for all the accessory links and tips!! Awesome!

[@MagargeeFilms]

Of course! Glad you enjoyed it! Please subscribe! I’d appreciate the support 😊

[@TS-eg8dm]

I have a 2015 F250 Lariat but dode you gave me some ideas

[@MagargeeFilms]

Awesome! Glad to help! What do you think you’re gonna do?

[@tomcam77]

Is that light bar blocking your air for the inter cooler???

[@MagargeeFilms]

Nope! No different than having the license plate there, which comes stock from the dealer

[@richardkoon5544]

What a great device. I just ordered via your link. My biggest thanks.

[@MagargeeFilms]

Awesome! Glad you found something helpful in the video! 🎉

[@juligant10]

Do you have the video of how to install the amber little lights? Thanks

[@MagargeeFilms]

I don’t yet. I basically spliced in the positive to the running lights and then grounded the negative. Secured the Amber lights to the grill with zip ties.

[@juligant10]

How you secured them? Cause I used zip ties and they get way out of place. Yours look centered

[@chrishernandez7193]

Bro. I love all your ideas!!!! I’ve been wanting to do some upgrades for awhile but just didn’t know what on my 2019. Definitely going to add some more now. 🤠🤠🤠

[@MagargeeFilms]

Awesome!!! Glad you found the video useful and found some ideas for yours!! Would love to hear what you do! Links in description if you need! Like and Subscribe! 🤙🏽

[@MagargeeFilms]

Please subscribe! would love the support!! :)

[@GainesMediaInc]

Awesome vid man! Running a Super Duty, but looks like most of the stuff will translate right over... 💯💪👌

[@MagargeeFilms]

Thank you! Nice ride! Hopefully these mods will work for you too! 🙌🏽

[@laykennungester5496]

that sunshade was the coolest part

[@MagargeeFilms]

@@laykennungester5496 I use it everyday!!

[@tommystassens1727]

the f150 ecobeast emblem link doesn't work. Any new links?

[@MagargeeFilms]

Looks like the “ecobeast” emblems are temporarily out of stock. Here is a link to black xlt badges. amzn.to/3L9UjLV

[@thomasg8628]

Did you have trouble getting the dust covers back on after installing the headlight bulbs ?

[@MagargeeFilms]

Yeah that can be a pain but I was able to get them on.

[@79random]

If you undo the clips for the inner fender and pull it back using a tie down strap, you can sit on the ground with your back against the tire and 'easily' replace the bulbs and dust covers. I found this far easier than laying on the ground and going straight up behind the bumper.

[@MagargeeFilms]

@@79random nice! That’s a good strategy!

[@MagargeeFilms]

Please subscribe! would love the support!! :)

[@petermartinez5867]

I'm sure this question was answered, but I looked at your list of items and I did not see that sunshade where is it from? Thanks

[@MagargeeFilms]

I didn't have room to fit it in the description. Heres the link! www.amazon.com/gp/product/B01MUBQWHG/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1

[@petermartinez5867]

@@MagargeeFilms Thank you.

[@MagargeeFilms]

Please subscribe! would love the support!! :)

[@greywolf2270]

Great video! Just bought my first truck/F-150 and will define be making some upgrades…

[@MagargeeFilms]

Amazing!! Congrats! All the product links are in the description. Please subscribe! I’d appreciate the support 🙏🏽

[@johnholbrook770]

Well done, I like your truck. I will use some of these on my truck.

[@MagargeeFilms]

Awesome! Thank you, glad you enjoyed the video!

[@kyleboyer8542]

I’m new to trucks so sorry I’m advance lol. Just got my 2017 F-150 XLT Sport yesterday, and it’s already kitted out. But when you say 33” like I hear 33’s, 35’s, etc. what does that number actually depict? Would it be the outer diameter? Because I have toyo open country tires on mine and they have an outer diameter of 34”

[@MagargeeFilms]

Hey Kyle! Congrats on the new truck! So when you hear 33" or 33s or 35s, thats referring to the outter diameter of the tire (or how tall the tire is when standing up right). Keep in mind that number isn't exactly accurate if you were to get out a tape measurer and measure it for yourself. Hopefully this link helps explain how tires are measured www.lesschwab.com/article/tire-size-explained-reading-the-sidewall.html

[@corynorell3686]

Solid video. Exactly what I was looking for; minor upgrades to improve aesthetics and quality of life.

[@MagargeeFilms]

Awesome! I’m in the same boat brother 🤙🏽 products are in the description. Please subscribe! Would appreciate the support!

[@MattSmith-me3fn]

Do you have a link for the tail light reverse bulbs? Did you have to install resistors when you replace the original bulbs with these LEDs?

[@MagargeeFilms]

I did not install a resistor and that’s why the blinker flashed double time with the LED. So I left the turn/brake light with the stock halogen bulb and only put the LED for the reverse. If you want to use the LED bulb for brake and turn, you’d probably need the resistor Yorkim 3157 LED Light Bulbs White Super Bright, 3056 3156 3156A 3057 4057 3157 4157 T25 LED Bulbs for Brake Lights, Backup Reverse Lights， Reverse Tail Lights - Pack of 10 www.amazon.com/dp/B01A4Z3FOS/ref=cm_sw_r_cp_api_glt_fabc_T8SY6GX38TGNGX24DZRV?_encoding=UTF8&psc=1

[@MagargeeFilms]

Please subscribe! would love the support!! :)

[@roryrichter4723]

Wouldn't chrome stripper and then regular matte black pray paint work better than plasti-dip?

[@MagargeeFilms]

You totally could, however it is very difficult to remove the badges to paint, without destroying them. And you don’t want to paint the badges while they’re on the car, because you’ll risk getting paint on you car. But with plasti-dip, you can easily remove any over spray! 😊

[@bronsonfrench7945]

Great video! Do you have the link to backup and cargo light LEDs? I'm looking all around amazon, but just not sure which ones to get?

[@MagargeeFilms]

Led cargo lights amzn.to/3sKKNqb

[@MagargeeFilms]

Led reverse lights amzn.to/35Tk1nr

[@JSonJSonJSonJSonJSon]

Great job! You put in some work getting all of this information together! Thanks for the links, very helpful

[@MagargeeFilms]

Thank you! Glad you liked it! Please subscribe! I would appreciate the support 😊

[@kels0711]

truck is awesome! tell me how you dipped your ford ovals. i bought the stuff to hyperdip mine but totally dont know how to make it look like yours!

[@MagargeeFilms]

I used plasti dip. It comes in a spray can. Link should be in the video distribution

[@timothyFL]

Tinted windshield was the best thing I did to my f150 35 % looks dark outside but clear on the inside

[@MagargeeFilms]

Nice!! Shortly after this video, I tinted my front windows to match the back and I love it! 18%

[@timothyFL]

@@MagargeeFilms I got my truck no tint at all I put 10 percent all around looks great in Fl is cool with tint

[@MagargeeFilms]

@@timothyFL nice!!! Tint makes a huge difference!!!

[@JDelta777]

Thanks for the info, helpful for us trying to save $

[@MagargeeFilms]

Of course!! Glad you found it valuable!

[@MagargeeFilms]

Please subscribe! would love the support!! :)

[@lukojak8]

Should get a full race intercooler if you’re going to keep the light bar

[@Tl-sq8me]

Sweet truck man, do you know the exact tire size? and also would it fit 35s? Or 33s is the biggest you can fit with a leveling kit thanks in advance

[@MagargeeFilms]

Hey thanks!! Yeah there 33s. 285/70R17 I think if you go with 35s (305) you’ll rub and have to do some trimming.

[@MagargeeFilms]

Please subscribe! would love the support!! :)

[@g-garz8497]

Hey brother where did you get your mud flaps. I believe I have the same fenders as yours.

[@MagargeeFilms]

Hey! Here’s the link! Thanks for watching! Teccom Mud Flaps Splash Guards... www.amazon.com/dp/B07Z1K1RJ6?ref=ppx_pop_mob_ap_share

[@MagargeeFilms]

Please subscribe! would love the support!! :)

[@williemitchell9943]

where did you get the 3m vinyl wrap it is not listed

[@MagargeeFilms]

amzn.to/41eBnmm

[@85anees85]

I noticed your upper arm after installing level kit is leveled (straight), how, because I installed level kit on my 2017 lariat but still the upper arm facing downward. I appreciate if you share what you did.

[@MagargeeFilms]

Hey Anees, I actually had a shop install the level kit so unfortunately I cannot give you specifics. My basic understanding is you disconnect the shock, bolt the spacer to the shock, and the install it back in the shock tower. And then you’ll need to get the wheels re-aligned. Hope that helps!!

[@85anees85]

@@MagargeeFilms same here shocks were disconnected and fixed the levelling kit, then did the wheel alignment but still the upper arm facing downward and due to offloading the upper arm hitting the coilover.😥. Anyway thank you for response. 👍🏻

[@MagargeeFilms]

@@85anees85 that sounds right!! Not sure why your upper arm is not level. I’m sorry I don’t have any more advice other than reach out to a tire shop and ask them

[@85anees85]

@@MagargeeFilms Thank you

[@MagargeeFilms]

@@85anees85 you’re welcome!

[@ylastchance]

You can cancel the start and stop with forscan.

[@MagargeeFilms]

True, but it’s several hundred dollars and can be tricky

[@BourneIdentity88]

great video. really learned a lot. cant wait to upgrade my new 2012! (My first truck)

[@MagargeeFilms]

Glad you enjoyed it and hopefully got some great ideas! Can’t wait to see what you do! Please subscribe! I would appreciate the support! Product links in bio 🤙🏽

[@BourneIdentity88]

@@MagargeeFilms awesome absolutely👍🏻 you’ve got my sub

[@xJustinxP]

Lots of cool stuff!

[@MagargeeFilms]

Glad you enjoyed it! Please subscribe! I’d appreciate the support

[@LibertyFirst1789]

I don't always add obnoxious light bars, but when I do I block my intercooler's air flow with them.

[@MagargeeFilms]

How is that different than when the license plate is there? 😉

[@LibertyFirst1789]

@@MagargeeFilms The license plate isn't an obnoxious "pay attention to me" light. Where did you front license plate go? Thats where that light should go.

[@MagargeeFilms]

@@LibertyFirst1789 it’s for off-roading bro. And you don’t need a front license plate.

[@bryanhayes9728]

We live in elk country, so the light bar is a safety feature, especially on forest roads. I talked to the service manager at the local dealership, and he has a light bar there on his truck, so good enough for me.

[@LibertyFirst1789]

@@bryanhayes9728 I'm sure that all adds up in your head. However you justify your attention seeking modifications is fine by me.

[@earl3496]

Oriellys is loving you.

[@MagargeeFilms]

Haha oh yeah

[@parkerbraswell5004]

What brand is the auto stop start remover?

[@MagargeeFilms]

Make sure to check which style switch you have www.autostopeliminator.com/

[@g-garz8497]

You’ve got a nice looking truck. It seems like you spent a lot of time on it. Do you have a video on how you plastidipped your emblems. I’ve attempted it before but did not come out as clean as yours.

[@MagargeeFilms]

Thanks for the love! No I have not made a video yet but would like to make one soon! The key is apply the next layer before the previous one has completely dried. That way they bond together. And when you peel it off, make sure the plasti dip is 100% dry and tear away from the emblem (down, up, or to the side). If you pull straight towards you, you’re more likely to pull the PD off the emblem

[@MagargeeFilms]

Please subscribe! would love the support!! :)

[@dutchynehtam]

Hey not sure if you will see this comment bud. I really like those Ecobeast badges. I can’t find them on the link. Any info on what’s up with that? Appreciate it 🤟

[@MagargeeFilms]

Hey man! Unfortunately the black ecobeast Badges aren’t on Amazon anymore. Here is a link to black lariat badges. Idk what trim level you have. Hope this helps! amzn.to/3viHZDB

[@dutchynehtam]

@@MagargeeFilms thanks for the quick response man! Sadly I own an XLT sport not a Lariat. I’m trying to find a cheaper one. The best one I found that’s legit is around $120 for the three pieces. Not sure what happened with your link. I was digging the ones you got.

[@MagargeeFilms]

@@dutchynehtam yeah I know! I got my badges like a year ago. Hopefully they’re just temporarily out of stock. I’ll search the internet and see what I can find. I’ll let you know if I find anything 🤙🏽

[@MagargeeFilms]

eBay. Black xlt. www.ebay.com/itm/224657240559?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1vbl2pyzcRsWHi1JMxhMYBQ30&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=224657240559&targetid=1599090335177&device=m&mktype=&googleloc=9031526&poi=&campaignid=15275224983&mkgroupid=131097072938&rlsatarget=pla-1599090335177&abcId=9300697&merchantid=459453796&gclid=EAIaIQobChMI65vZjuaO9gIVqgytBh1eMwOSEAQYASABEgItx_D_BwE

[@MagargeeFilms]

shop.vipautoaccessories.com/products/f150-xlt-blackout-fender-emblems-and-tailgate-badge

[@johnmarklopez5194]

Thanks Jay Cutler

[@wrealestate8778]

Fantastic truck congratulations

[@MagargeeFilms]

Thank you! Please subscribe

[@matrafa]

Great video! Great ideas! I’ve got some work to do.

[@MagargeeFilms]

Awesome!! Glad you enjoyed it!!

[@alanbagen5019]

Put an led light bulb in the gear selector as well

[@MagargeeFilms]

Oh that’s dope! Do you have a product link?

[@hkofler07]

Awesome video man! I'm just starting to do some upgrades on my F150! Thanks for all the tips!

[@MagargeeFilms]

You’re welcome! Glad you liked it!

[@Dispair06]

One of the first mods I do to any new or old vehicle is the headlights Finally! BLACK FRIDAY is HERE to SAVE the Day! Headlight Revolution has got a killer Black Friday sale for everything in the store! You can snag deals on items for up to 25% OFF! Don't miss out this next week on these great deals while you can! You don't want to wait to upgrade the lighting on your vehicle! Check it out Starting Monday the 22nd!

[@moefuggerr2970]

So you found a JC Whitney catalog.

[@jebsdaddy141]

Amazon is the new JC Whitney

[@DerekandCourtney]

Did you paint the grill and bumper black?

[@MagargeeFilms]

I did paint the grill black but the bumper is a vinyl wrap! I chose to wrap the bumper so I could go back to white if I ever wanted to.

[@DerekandCourtney]

@@MagargeeFilms What kind of paint Did you use

[@MagargeeFilms]

@@DerekandCourtney It was a Flat Oil Based paint that I used with a spray gun. But honestly, spray paint would work just fine. Just sand and prime first

[@DerekandCourtney]

@@MagargeeFilms OK because my bumper is chrome which I don’t like so I’m going to try to sand it and then prime and paint. But I really love your truck 💙

[@MagargeeFilms]

@@DerekandCourtney awesome! Let me know how it turns out!! Thanks for the love! 🙏🏽

[@rob_225]

Where is the sunshade from

[@MagargeeFilms]

Amazon!! Dash Designs The Shade Retractable Windshield Sunshade, 23" (SV03) www.amazon.com/dp/B01MUBQWHG/ref=cm_sw_r_cp_api_glt_fabc_PAY17PSKHDSFM3EPFY6Z?_encoding=UTF8&psc=1

[@MagargeeFilms]

Link in bio too 👍🏼

[@dannyrodriguez645]

You going to black out the head lights ?

[@MagargeeFilms]

Maybe!! I just love the bright lights and dont want them to look dim when im driving at night

[@321southtube]

Very GQ truck and at the same time seemingly soft and feminine. Nicely done.

[@BryanHeine]

When installing a level kit does it change the steering in anyway? I've been told this but not sure if it is true.

[@MagargeeFilms]

I did not notice any steering differences or issues. You do however need to get an alignment after installing the level kit.

[@jorgetoro5707]

So it really depends on how much height your putting on your truck. And if your doing a suspension or a body lift. Both change the Center of Gravity which is why ppl say it affects the steering but the suspension has a bigger effect than just a regular body lift cuz you normally just do about a 2" lift. Thats why suspension lift is more expensive cuz more modifications have to be done to multiple parts over the basic body/ lvl lift kits

[@MagargeeFilms]

Please subscribe! would love the support!! :)

[@cesargarcia386]

Where you got ur vinyl wrap

[@MagargeeFilms]

amzn.to/4awyClq

[@D3lgadillo88]

Nice truck man, can you provide a link for the eco beast badges?

[@MagargeeFilms]

Yes! please subscribe! amzn.to/3AqNm30

[@joebonilla5997]

how long did the sea light leads last you?

[@MagargeeFilms]

I got them in 2017 and still run them 👍🏼 no issues.

[@CollegeKiddKelvin]

Do you have the link for the windshield shade?

[@MagargeeFilms]

Yes sir!! Dash Designs The Shade Retractable Windshield Sunshade, 23" (SV03) www.amazon.com/dp/B01MUBQWHG/ref=cm_sw_r_cp_api_glt_fabc_144S7C3STJCF4ZMCECYE?_encoding=UTF8&psc=1

[@CollegeKiddKelvin]

@@MagargeeFilms thanks

[@tommy_317]

Great video! I like the lights under the hood. I would use a pin switch to operate the lights instead of the rocker so I wouldn’t forget to turn them off.

[@MagargeeFilms]

Nice!! That’s a smart idea!! I had a hard time finding a pin switch online. Maybe if I find one, I’ll swap it out with the rocker!!

[@MagargeeFilms]

Please subscribe! would love the support!! :)

[@mrlickie]

Nice ride man. If my f150 (23) was 2 wheel drive. I would have lowered it. Lifting is going to reduce gas mileage and handling at higher speed. You’ll get pushed around by wind gusts. I have a 23 f150 with the 5.0 coyote 4x4. I think I’m going to just level it and upgrade wheels and tires. Be careful about how much strain you put on your engine. I don’t hear about many ecoboost engines going past 100k miles without mechanical failure. Watch some Scotty Kilmer videos here on KZbin. He is a good mechanic and explains things well.

[@MagargeeFilms]

Thanks for your comments. Sounds like you have a great ride too. The ecoboost is a solid engine if you check out the forums and groups of actual owners. I go off-road Occassionally so a little lift was a good option for me. I prefer that look better anyways. Enjoy your truck! 🙌🏽

[@mrlickie]

@@MagargeeFilms word. Be sure to adjust your headlights to account for the change in ride height if not already done.

[@trancelove21]

Cool truck ! Where did you get that license plate frame ? Can you provide a link ? Thanks !

[@MagargeeFilms]

Thanks for the love!! Yeah heres a link www.amazon.com/Cruiser-Accessories-58150-Matte-License/dp/B073SQ9B2T/ref=sr_1_6?dchild=1&keywords=black+license+plate+frames+industrial&qid=1615331926&sr=8-6

[@MagargeeFilms]

Please subscribe! would love the support!! :)

[@scribecypress]

Clean lookin truck!!

[@MagargeeFilms]

Thanks!! i appreciate that!!

[@MagargeeFilms]

Please subscribe! would love the support!! :)

[@scribecypress]

@@MagargeeFilms done! And I gotta catch up videos!

[@donaldnewland4066]

Did you film this at Kaiser.

[@MagargeeFilms]

No lol

[@grayson8566]

All that and stock headlights?

[@MagargeeFilms]

One thing at a time. Aftermarket headlights are hundred of dollars. The LED bulbs are great for now :)

[@Cormac2023]

The antenna size and shape is closer to a 30.06. A 50 BMG is much larger than that.

[@MagargeeFilms]

@@Cormac2023 good call! I’m not a bullet expert

[@Cormac2023]

@@MagargeeFilms, I was raised by a WWII Veteran, Marksman and Gunner. But, I didn't actually get into the details until 2010. I'm 62, btw, so there was a long span in my life that were filled with church, family and work. But now, it's all about those F150's. I'm soaking up as much intel on them as I can. I was comparing numbers on the manufacturers and the numbers kept bringing back to F150's.