Going through my welding rig and answering some common questions.
Пікірлер: 107
@youngguns13194 ай бұрын
First thing i did when i bought my 2012 6.7 cummins was get rid of the egr and throttle valve and put a tuner on it to not throw codes has over 430k miles still running great and gets better mpg and more power when i did all that i also got a 6 spd manual trans i love my truck has never let me down or cost me money other then filters and stuff like that
@DownhillWelder3004 ай бұрын
That’s great news! I wish i could have said the same. I still like the truck just had bad luck. It will pull anything i hook it to!
@mikewilber28863 ай бұрын
@@DownhillWelder300😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
@youngguns1319Ай бұрын
@@DownhillWelder300 For sure I’m a dodge Cummins kind of guy
@lordoftheturps93374 ай бұрын
I just started my own mobile welding company need to get all the stuff I need to actually get the ball rolling makes me smile seeing a fully done up rig truck telling myself it’s gunna be me soon
@DownhillWelder3004 ай бұрын
That’s awesome! I wish you the best! Thanks for the comment!
@roadtrekralph311Ай бұрын
I daily drove a Chevy for 28 years, daily driver! The only reason I sold it was I wanted a bigger truck. After 28 years and 1.7 million miles, it still had the factory power steering fluid in it, and the factory clutch fluid, other than changing the battery and alternator a couple times, I absolutely never had any problems with it.
@D.P.MorrisConstruction3 ай бұрын
Awesome rig, everything about it ‘ looks like you run a tight ship. Watching all your videos !
@DownhillWelder3003 ай бұрын
Thanks a lot!!! I really appreciate that!
@user-tb3tm8jx7m4 ай бұрын
It’s a pretty truck, hope your luck gets better with it. My early 02 6spd has been great to me, 490k and still runs great. Have been through 4 clutches though. Maybe it’s the work I do, maybe it’s me. Sometimes we get lucky, other times, not so much. Nice truck, I wish you luck and well wishes in life and in your career.
@DownhillWelder3004 ай бұрын
Thanks a lot! I still like the truck even after all the bad luck so that means something i guess. I appreciate the kind words!
@MegaRetr4 ай бұрын
Awesome truck😊
@DownhillWelder3004 ай бұрын
Thanks a lot!
@Sdukes0013 ай бұрын
Beautiful rig I have created a fascination with welding rigs since hauling some pipeline equipment for a local job. Carli makes great suspensions CJC off-road even has custom deaver sets for the rear for the added weight in the bed at all time. The kings from a pintop would make this rig ride day and night torsion sway bar is a great addition.
@DownhillWelder3003 ай бұрын
Thanks for the comment! Kings are definitely on the list next time.
@Cuontheflipside724 ай бұрын
Welcome home brother from another Illinois boy
@DownhillWelder3004 ай бұрын
Thanks a lot! I’m appreciate that!
@Logaweed4 ай бұрын
The factory Alcoa style wheels look so good on these duallys.
@DownhillWelder3004 ай бұрын
I agree! That was one thing i made sure to get when i ordered the truck. Thanks for the comment!
@allanstephenson93364 ай бұрын
Very AWSOME ❤ !!!😊
@DownhillWelder3004 ай бұрын
Thanks a lot!!
@BruceMyersLBZ4 ай бұрын
My man!! Plain old black wal mart bath towel seat covers! Been using them for years😊
@DownhillWelder3004 ай бұрын
They work perfectly for what i need them for!
@aaronsbarker4 ай бұрын
I really like the truck. That bed is slick looking and seems pretty functional... I have questions about the gooseball placement, but understand it with all the other gear taking priority. I did wonder what the big bolts are back there... I did hear you mention the two 2" receiver mounts for a beveler, but are those just mounting bolts where you had to chop the frame or is there something that mounts there? One thing I like about my short-wheelbase, single cab F-450/F-550 chassis cabs for the boat moving & hauling I do has been the wider front ends (with the associated turning radius) as well as the narrower rear end where the front tires track between the duals rather than with the inner. I kinda like the look of the P/U dually axles hanging out, but also appreciate the slimmer/tucked look of the CC where I'm less likely to clip objects in tight spaces. On our new 2021 F-550, we modified a CM aluminum flatbed to fit a Ramsey 20k hydraulic winch and a 30k Reese 5th. It's got a couple cargo boxes in front of the tires for tools and straps. I splurged on a Kelderman shuttle rear air suspension on the 550 because the 450 was a beast on the ol' kidneys. We haul a Brownell 10 ton highway trailer that is fully hot-dipped galvanized and scales out at 8,400 empty and the whole rig, loaded, has gone across the scales at 38k. The trailer goes down the boat ramps and submerged in Maine salt water 3-5 times a day during the spring and fall, so it's a maintenance nightmare... mostly the brakes and hub seals. I've never been a fan of the aesthetic of the Ranch Hand bumpers, but I do see their functionality. I clobbered a doe with 450 and mangled the bumper, kinda like you did, without damage to any other panels, but haven't found a decent replacement that tucks in tight but also offers a rugged 2.5" receiver so I can move my hitch up front for easier trailer moves around the yard.
@DownhillWelder3004 ай бұрын
Thanks a lot! The 4 bolts are for my 5th wheel hitch. I pull my camper with this truck. My camper has about 2,000 pounds of tongue weight. With the weight of the welding machine, leads, tools and bottles all in front of the axle, the weight balances out nicely and the camper pulls great. I’ve pulled the camper over 16 hours away from home with no issues at all.
@americathefree370827 күн бұрын
OMG! I hope you get your maney out of it! Sorry for your loss.
@peanutsmith14624 ай бұрын
I’m a die hard Chevy man but that’s a nice looking ram
@DownhillWelder3004 ай бұрын
Thanks a lot! I really appreciate it!
@jimjamess86334 ай бұрын
165k on mine. Dropped a valve, but the piston caught it! Had to replace the engine also!
@DownhillWelder3004 ай бұрын
Sorry to hear it! It’s frustrating to say the least when you hear everyone talk about how great the engine is.
@lyndonhamby74323 ай бұрын
Super nice rig 👍💪🏻🇺🇸
@DownhillWelder3003 ай бұрын
Thanks. Thank you for taking the time to comment.
@lyndonhamby74323 ай бұрын
@@DownhillWelder300 I have a 06 g56 3500 Cummins I bought new and still love it it’s a White Sport Laramie it been flawless but I love your dually as well. Stay safe my Cummins man 👍🇺🇸✌️
@DownhillWelder3003 ай бұрын
Thanks. When i ordered my truck i was on the fence with the g56. Kinda wish i went with it.
@jasonkocienski65673 ай бұрын
I really enjoy watching your videos and really love the truck and the setup that you have. I am putting a flatbed on mine soon. Do you have any info/pics of how you mounted to the bed to the truck?
@DownhillWelder3003 ай бұрын
Thanks for the support! I built mounts under the bed to mount to the factory body mount locations.
@jasonkocienski65673 ай бұрын
Awesome! When you have a free moment can you send me a pic of what the mounts you built look like on the truck? looking for an idea of a very strong mount to tow gooseneck and on the bumper pull and I just don’t want the bed to be the weak link. Or any weak links for that matter.
@DownhillWelder3003 ай бұрын
Sure thing!
@zaneleek26644 ай бұрын
Great set up. I have to ask about your JI Case eagles on your welder?
@DownhillWelder3004 ай бұрын
I’m surprised you’re the first person to ask about them. My family and my wife’s family are all JI Case fans. Between the two families, we own around 50 tractors. My wife’s family currently still farms with nothing but ji case horsepower. My mom actually worked at a case dealership when i was younger.
@joshuadonovan8333 ай бұрын
Hey, great vid but i have a question. do you have any legal issues with the window tint like with the cops?
@DownhillWelder3003 ай бұрын
Thanks! Not as of yet. I’ve been pulled over for speeding once but the officer didn’t say a word about the tint. I also don’t drive around like a 16 year old attracting a bunch of attention.
@off-roadoutlawrepairs29104 ай бұрын
That’s a wicked truck, what do you use more your iPad or your laptop?
@DownhillWelder3004 ай бұрын
Thanks a lot! By far i use the laptop a lot more. Thanks for the question.
@tdotw774 ай бұрын
I have to say that bed with the matching bodylines is perfect. I love it when the time is taken to do the matching body line into the aftermarket bed(i just started watching this, not sure if u built or bought the bed - yet). It looks sooo much better when its smoothed out like that and not just a sharp corner starting the bed.👍🏻👌🏻🛠️🔧🔩🦺🗜️⛓️🚧⚠️
@DownhillWelder3004 ай бұрын
Thanks for the comment and the compliment! Hope you enjoy the video!
@jamescaretto35253 ай бұрын
That’s awesome cause I was just curious out here it’s mostly all three distribution high pressure and transmission you guys burning on all tdw or you guys still using mueller cause you were saying 7018 for procedure figure it was for in service pipe
@DownhillWelder3003 ай бұрын
We put both on. Mueller up to 12” then TDW on everything else.
@erck8152 ай бұрын
I also live in illinois, good looking set up. I have a question. Ive been doing metal fabrication for about 10 years, how did you start your business?
@DownhillWelder3002 ай бұрын
Thanks a lot! I don’t own a business. I work for a company and rent my rig to them.
@andrewleatherman49313 ай бұрын
Nice looking truck, however your mistake was ever-thinking Chrysler was a good company (though many large domestic companies are not that great). Cheers sir.
@DownhillWelder3003 ай бұрын
lol. Thanks for the comment.
@njonl3 ай бұрын
You have a muffler on there? Or just straight pipe? I love the sound of a straight pipe Cummins but I also don’t want to deal with a drone when pulling a trailer
@DownhillWelder3003 ай бұрын
4” straight pipe. It’s obnoxious. lol
@hellofreeman66534 ай бұрын
Surprised you don’t have weather techs! Must have
@DownhillWelder3004 ай бұрын
I had them in my last truck and wasn’t a huge fan of them. They were a little harder than i was planning on. They did exactly what they were supposed to do though, my carpet looked brand new when i sold the truck.
@JoeMarcello1234 ай бұрын
You couldn't give me a Chrysler product... hope you have better luck with it. Awesome looing truck though. How can you see at night with the tint?
@DownhillWelder3004 ай бұрын
I hope so too! Thanks for the compliment. The tint was definitely something to get used to at night. I don’t let my wife drive it in the dark. lol
@devvoid13124 ай бұрын
Let's be honest they're all junk. Ford, ram, gm, all have the same emissions problems and we're seeing trans and fuel system failures in the Ford's too 🤷♂️
@lordoftheturps93374 ай бұрын
Couldn’t help but see your power company being the same one I have you located anywhere near Knox county?!?!?
@DownhillWelder3004 ай бұрын
No, I’m down in Clinton county. I’ve done a lot of work up there though.
@davidlambert2537Ай бұрын
Had a jeep and it was a nightmare from day one...Had it for 2 years and a year of that time it was in the shop... Never again will I own a chrysler product...
@DownhillWelder300Ай бұрын
I completely understand!
@MichaelSchneiderTexas3 ай бұрын
I wish they let us use 5 percent tint in Texas its illegal on the front glass here, plus any tint on the front windshield except the eyebrow is illegal too and wont pass inspection.
@dalekinnin82803 ай бұрын
It’s pretty much illegal everywhere but we don’t care. Find a spot that won’t care about the tint I promise there’s a shop somewhere in Texas that will pass it 🤙🏽
@DownhillWelder3003 ай бұрын
It’s not legal here, but I’ve never had trouble. As long as you’re not being an idiot the cops really don’t care about window tint. It’s usually an extra ticket if they pull you over for something else. lol
@MichaelSchneiderTexas3 ай бұрын
Plus its hotter than a mofo here in summer., I am probably going to take the rear window tint off and redo it with 5 percent instead of the see thru tint on there now.
@DownhillWelder3003 ай бұрын
It makes a HUGE difference in the summer.
@user-vv4gr9br6v4 ай бұрын
You do a grid heater delete on the truck?
@DownhillWelder3004 ай бұрын
No, the grid heater is still in it. Egr, is gone, egr valve is gone and i installed a coolant bypass and an oil filter relocation kit.
@devvoid13124 ай бұрын
What rear wheel spacers are you running?
@DownhillWelder3004 ай бұрын
They are 2” steel spacers. I think the brand name is “stahl”. I got them from custom offsets.
@chrisgarza55662 ай бұрын
Hey bud where did you get your hose reel cover from??
@DownhillWelder3002 ай бұрын
The guy doesn’t make them anymore, but a 10-12 pipe wrap fits perfectly on the reel.
@chrisgarza55662 ай бұрын
Thanks bud, I had asked the guy but didn’t know if it was the same guy we were talking about. Stay safe out there!
@CarlosTorres-hv5ym4 ай бұрын
I wish I had a ram like this but have no reason
@DownhillWelder3004 ай бұрын
Thanks!
@rrrrr51184 ай бұрын
How did you mount that cb up there?
@DownhillWelder3004 ай бұрын
I built brackets that mount under the retainer for the sun visors. They work great and can be removed without ever knowing a radio was mounted up there.
@98_12v3 ай бұрын
I definitely saw a ski koozie! Ski is my favorite soft drink
@DownhillWelder3003 ай бұрын
Yep! Bottled less than 15 minutes from me!
@98_12v3 ай бұрын
@@DownhillWelder300 that's awesome
@mcd50824 ай бұрын
Would like to see more about where you work in the field
@DownhillWelder3004 ай бұрын
That’s definitely on my list of videos to get out. Please subscribe so you don’t miss when i post it. Thanks for the suggestion!
@rossmccune45574 ай бұрын
What size tires? That thing looks dialed!
@DownhillWelder3004 ай бұрын
Thanks a lot! 35-12.50/17 Toyo open country mt’s.
@rossmccune45574 ай бұрын
@@DownhillWelder300 I just bought a 14 3500 Laramie a month ago and I definitely wanted to go with the fat tire and dark tint! Looks sharp!
@DownhillWelder3004 ай бұрын
Tires and tint make all the difference!!
@behr19944 ай бұрын
What is the name of the lift you’re using
@DownhillWelder3004 ай бұрын
It’s a “super lift” brand 4” lift.
@georgerivera80324 ай бұрын
Cut 10 inches off the frame to get smaller but you’ve also got a huge bumper up front…. 🤔
@DownhillWelder3004 ай бұрын
lol. Trust me, I hate the bumper and wish I never needed to put it on.
@Pure_KodiakWILD_Power3 ай бұрын
That's the dinner catcher 😂 And it doesn't look terribly unbalanced.
@user-dj3yn1yj6p2 ай бұрын
Think your tints not dark enough.
@DownhillWelder300Ай бұрын
Yes. lol.
@matthewschiebout73843 ай бұрын
I'd NEVER buy a 3/4, one ton off the lot...ordering is the only way
@DownhillWelder3003 ай бұрын
I agree! When spending that kind of money, get what you want!
@michaelbefumo-qg7ji4 ай бұрын
Nice set up, to shame that has that exhaust fluid
@DownhillWelder3004 ай бұрын
Thanks a lot! It has the tank for it. lol
@hellofreeman66534 ай бұрын
I have a 2018 ram 3500 mega cab. And it’s junk. Every problem you can imagine.
@DownhillWelder3004 ай бұрын
Sorry to hear that. Sounds like we both had Friday afternoon trucks. lol
@hellofreeman66534 ай бұрын
@@DownhillWelder300 100% lol. I’ve realized If you have more than 3 problems in quick order. Unrelated. Truck is most likely a lemon. I’m so invested in mine I’m stuck with it. Maybe after I replace every part on the truck. It will run for 6 months before I have to do it again.
@texasproud33323 ай бұрын
Absolutely typical story for a dodge what a shame
@DownhillWelder3003 ай бұрын
I’ve learned my lesson. That’s for sure.
@williamcullum35223 ай бұрын
stop running over deer, Afghan Vet
@Pure_KodiakWILD_Power3 ай бұрын
Sounds like that truck has gotten him alot of free dinners.