You wear mathews gear for the hoyt bows and hoyt gear for mathews bows. I see you Josh lol.
@jackbuendgen3899 ай бұрын
Our guy ain't bought!
@toddlymburner57839 ай бұрын
Yup and gave the 33 a 4/5 ranking for speed and it was 15 fps slow
@toddlymburner57839 ай бұрын
@@jackbuendgen389he sure is! Funny how he gave Mathews a 4/5 on speed that shoot 15 FPS slow lol. Then “took into consideration they have 80% mods” and then gave them credit for an additional 4-5 fps. Hoyt has 80% Letoff on their cams. He never took that into consideration. Only for Mathews
@toddlymburner57839 ай бұрын
How is a 348 FPS bow that shoots 334 only 4 feet off????????
@toddlymburner57839 ай бұрын
@@connor_bohnts it’s a speed test! You can’t give 1 company a make belief additional 4 fps for Letoff and not do it for the other company in order to make 1 company look better. I own a VTM and a RX/8 and a V3X. I know all about the difference. Going from 80-85% on a Hoyt and you will not even notice it regarding DL. Mathews always measured 1/2 long but you never see him factor that in. The Mathews was very far off it’s IBO and should not get a 4/5. Not saying it’s a bad bow but he should be honest.
@user-ms2cz1pn4bАй бұрын
Mfjj I think alot of people agree. I really like how you rate bows and don't cater major bow companies you show and tell exactly how the bows no sugar coating going on. The bow is what is lol
@BY-dq3mt6 ай бұрын
Another great review, thank you. I went back and watched your Phase 4 29 review. Phase 4 was 330 fps. Lift 29.5 is 333 fps. Not enough to move the needle for me, especially if the draw cycle is any stiffer than Phase 4. For me the upgrade decision will be about the weight savings versus my Phase 4. The lighter weight is very impressive.
@robertsophiea053 ай бұрын
Picked mine up today I got it at 80lbs because at 80 it’s no exaggeration easier feeling than my Bowtech SR6 at 70. (Especially the let down) My tech asked me if I had watched the MFJJ review as if it was a prerequisite.
@chrisbush89816 ай бұрын
You can't mark down for ATA and brace height if you didn't make sure the strings were to factory spec. Twist the String, Cables and yokes to stated factory spec, then check ATA and Brace height.
@spodyr69 ай бұрын
Just the fact that you are wearing a Hoyt shirt while reviewing the Mathews speaks volumes. Always like watching your product reviews and especially like the metrics used to evaluate each bow on a level playing field. Great work !
@douglasgraham1009 ай бұрын
Understand how much effort and work you put into these reviews. Nice job and thanks
@waynehumphrey89109 ай бұрын
Interesting all his other reviews he used a whisker biscuit not a QAD
@mountaineermaniac70059 ай бұрын
Josh, I believe your testing the speed with ATA specs. The IBO guideline is 80lbs 400 grain and maximum draw length.
@tristenfields33289 ай бұрын
Agreed. His is ATA and the advertised is IBO.
@setharter9 ай бұрын
Everyone advertises IBO. Mathews just doesn't come close to it.
@mountaineermaniac70059 ай бұрын
@@setharter None of them will if you test for an IBO speed with ATA guidelines. These are 2 different things.
@setharter9 ай бұрын
@mountaineermaniac7005 Why is PSE close? They specifically list IBO on there bows? It's 5 grains per pound of draw weight UP TO 80#. Why do bows that are unavailable in 80# still show IBO speeds? Why does he crucify Prime for not coming close to their listed IBO speed? Why are they not gifted the same leeway as Mathews? ATA guidelines fall within IBO guidelines as well.
@mountaineermaniac70059 ай бұрын
@@setharter IBO guidelines allow a maximum of 80lbs, so if other platforms don’t offer an 80lb option then they can’t test/publish those results at their maximum. You can still call it IBO, but your just not getting the most from what is allowed. Why they don’t publish their results as ATA instead? Probably because IBO is what everyone recognizes.
@richardfehr79319 ай бұрын
Thanks for doing these reviews. It would be super helpful if you had a list of all of your bow ratings on your website so everyone could go to one place to see all the bow ratings.
@dakotadickens89028 ай бұрын
Now rates do nothing because most people that buy one is gonna leave a 5 star. If they don’t then they won’t review. Then additionally everyone is different in what feels good. Some people say the lift isn’t smooths I think it’s draw is smoother yet has a bit heavier feel than all others. To the point I ordered 80# mods because 70# mods was like butter coming back. I personally have never been a big fan everyone calling people fanboys though. Most people have never talked to people that’s a part of the company’s. Mathews is the only manufacturer that will make you feel like family while they brake it off inside you attempting to get you to buy a bow. Hoyt bowtech they don’t even use ky before they rape your wallet.
@lycheeznuts9 ай бұрын
Yes would much rather have an aluminum Mathews made in the USA instead of a Chinese carbon Hoyt where the riser is made in a sweatshop
@anthonylubic9 ай бұрын
Great review but the speed should be a 3 🧐
@douglasrobertson49749 ай бұрын
Agreed and the price score of 5 is ridiculous.
@user-ec4lv6or8s4 ай бұрын
Very fair review. He is just as hard on Matthew’s equipment as he is on any other brand, even budget products. He gave it a 3 for tunability because that’s a fair number. Anyone claiming he’s excessively pro Matthew’s has to deal with that fact. Decided to hold off on Bear Alaskan XT and saving another 6 months for the lift. I want to try it after watching this. Great vid
@michaelficarro25919 ай бұрын
IBO is 80lbs, 400 grain arrow and no draw length restriction.....thats where they're getting their numbers.....
@calebwolff59839 ай бұрын
I thought IBO was always 70#, 30" draw, 350 grain arrow.
@michaelficarro25919 ай бұрын
@@calebwolff5983 that’s ATA
@JamesBond-oc4gm9 ай бұрын
The only difference is the draw length.
@michaelficarro25919 ай бұрын
@@JamesBond-oc4gm and the draw weight, and the arrow weight
@JamesBond-oc4gm9 ай бұрын
@@michaelficarro2591 no, 80# and 400 will shoot the same as 70# and 350, or 60# and 300. The only difference is the draw length
@randyringler68479 ай бұрын
Appreciate your reviews on bows and archery gear. About as non biased as you can get. My go to resource for archery info. Keep up the the good work.
@theincredible91689 ай бұрын
MFJJ for the best bow reviews and lusk archery for broadheads. What a time to be alive.
@291031269 ай бұрын
Damn, 16 feet slow. Ok 12 feet slow but still if another company did this it would be a 2 not a 4. Haha😂
@toddlymburner57838 ай бұрын
100% he tested another bow that same week and it was 15 fps slow and gave it a 1/5 yet Mathews was 16fps and got a 4/5 lol
@CarlosRamirez-vq5cr9 ай бұрын
Great reviews I’m a Mathew’s guy but your reviews r spot on and accurate thanks for taking the time and getting the information out
@juanrodriguez-mu7koАй бұрын
Who cares what people think they’re hater’s. You’re the best . There’s no one even close to what you do for us so you keep up the great work you do FOR US!!!
@royhoglund13229 ай бұрын
Mathews is advertizing IBO speed. It might be interesting to measure the speed with both IBO and ATA parameters. I can't wait to shoot this bow!
@tfrost33elkhunter9 ай бұрын
I’ve always been a Mathews guy. I have been considering changing. Now after this review it appears I ain’t going nowhere. Seems like an impressive bow
@TheJoeml859 ай бұрын
Same my buddy switched from the phase4 to the prime revex for this season was thinking about switching to but not now!
@alansousa24889 ай бұрын
@@TheJoeml85did you prefere the prime revex? I love the finish of them
@brettb44529 ай бұрын
What mathews are you currently shooting? Just curious
@TheJoeml859 ай бұрын
@@alansousa2488 i like the lift better
@TheJoeml859 ай бұрын
@@brettb4452 halon 32 5 inch brace height
@zachs139 ай бұрын
I think you really wanted to give this bow all the points you could. True average of those 3 shots was closer to 332, not 333. Even if you give it an imaginary 4fps, thats still well below your own benchmark of no less than 10fps slow. Have you ever given a bow extra speed in a review based on a hypothetical? Id be curious to see what it actually does at 80% letoff. Regardless, nice review and looks like a solid option!
@zachs139 ай бұрын
Update: just watched Dan Statons video on his Lift. He changed between 80% and 85% letoff mods and got identical speed.
@win300mag19 ай бұрын
Has nothing to do with that. IBO speed testing is not based on the criteria he is using. IBO speed tests are done with 80 lbs draw weight, 400 grain arrow, and there is no draw length max. So in my opinion it’s a fictional number for most of us. What he is testing against is ATA speeds. Mathews doesn’t publish the ATA speeds which is something that I don’t understand because everyone assumes that they are lying, they aren’t but what they are telling us is not a realistic setup for 99% of us.
@JS-ji5bl9 ай бұрын
@@win300mag1 well said, I don't know why they test there Bows like that it's crazy when everyone else does it the other way ata test... lol
@metro96369 ай бұрын
Agreed..he's stretching this review
@l.i.archer53795 ай бұрын
My Bowtech RPM 360 is the smoothest-drawing speed bow I have ever had the pleasure of owning. At 26.5" draw length (27" measured), 64#, it shoots my 385 grain arrows at 285 FPS. The draw cycle is smooth as all get-out, and the way I have it set up at 85% let-off, I can practically hold it forever.
@grantprice68039 ай бұрын
Great review MFJJ. i only wish I didn’t buy the phase 4 now. Wife threw a hard O when I said Mathews has a better bow for me😂
@Singlebarrel23239 ай бұрын
11 fps off while giving them the free 4fps even though the parts aren’t available should have been a 3 if you ask me. But it’s not my channel. I think it’s pretty clear that’s being extra generous when on any other bow you wouldn’t have finagled yourself into justifying the misrepresentation. Even with 4fps being given for a part that’s not available it was still outside of your 10 fps range but you gave them a free excuse by saying it’s still fast for the feel 😂 either be objective or don’t come up with a scoring system. That’s why people are mad. There is clearly some sort of difference between manufacturers or you would say the same things about Mathew’s that you critique on every other manufacturer
@02LM78 ай бұрын
I’ll admit this may be the quietest bow on the market, which does make it a joy to shoot. The draw cycle is very linear, it feels like 70# all the way till it drops into the slot, whereas my pse tapers off towards the end. Not better just different. But With a 332.66 average fps I’ll keep my 4 yo evo nxt that’s rated at 329 and ACTUALLY shoots 329 at 30/70/350. At best I’d pick up 4-5 fps not worth the $1400 price tag imo.
@jamestipton97629 ай бұрын
Thank you for doing Honest reviews! This is a sweet looking rig! I have never owned a Mathews but have shot one a couple years ago and really liked it think this is the year I will make the change. I don’t know why so many people hate on Mathews haters gonna hate I guess
@cbarnes66859 ай бұрын
Love the payback troll job with the T shirts. Wore a Mathews shirt for the Hoyt release and not a Hoyt shirt for the Mathews release. This just screams MFJJ!!!!!!
@dylangriffin57786 ай бұрын
Just looked st this bow today and felt comfortable with it. Ove always owned matthews shots others, but After this review you just sold me on it!
@ericwolbert32569 ай бұрын
You seem a little biased when it comes to Mathews just a little bit
@EpiiKSiiNz9 ай бұрын
it's strange alot of other people getting much slower readings with the lift using the same thing also tested with different arrow weights.
@jcros11799 ай бұрын
Great job brother! I will agree that you do a great job on your reviews. I just got back from the shop and shot the Hoyts, Matthews, and the Bowtech. I hate to say that the Matthews felt the worse this year. Felt like they went backwards on draw cycle and vibration. Was disappointed, the other 2 were neck and neck. Looking forward to more reviews. Also thank you for being a fantastic retailer for my archery needs!
@iwilrage9 ай бұрын
Adjustability is a 2 you have to buy other things to tune that bow or to change the draw length or to change the weight. But simply buying Mods to change the weight does a lot cheaper than buying limbs
@ryanbode94679 ай бұрын
It's more adjustable than any other bow available
@seniorvendetta969 ай бұрын
@@ryanbode9467da hel, are living under the rock?
@hoffmmd9 ай бұрын
You have to take it to a shop and buy additional parts. At that point it is not more adjustable than any other bow...you might as well buy multiple different bows to get that adjustability range. Still love it and it will probably be my new purchase, but I think that needs higher consideration.
@Basshole519 ай бұрын
I enjoy how you wore your Hoyt shirt for the Matthews video and your Matthews shirt for the Hoyt video....things you learn when you watch EVERY VIDEO
@darrenlowry74779 ай бұрын
I've always found Mathews bows too top heavy with the extra machine work I'll have to try one out.
@wyatthill929 ай бұрын
Keep up the good work! I'm on deployment and downloading these videos on a port call so I can watch them even when I don't have Internet. Can't wait to see all the bows in person when I get back!
@huntsimple95279 ай бұрын
I watched people shooting the LIFT at an archery shop. There was a guy shooting a Phase 4 near them. The Phase 4 sure sounded more quiet than the LIFT did. The LIFT they were shooting was all decked out with a stabilizer, etc. ( I think it was the factory demo setup sent to the dealer, fully equipped). The Phase 4 was equipped similar and it was easily more quiet. Also, the guy shooting the LIFT said the draw cycle was very heavy at the front end of the cycle. Very interesting! I have not shot one, just sharing what I have seen so far. My dealer said all of the LIFTs so far have come in really heavy in terms of draw weight. With a 70# mod they are drawing close to 75 lbs, etc. Another interesting point.
@justonpohl49379 ай бұрын
The lift has a IBO speed rating and not a ATA so they can use 80lb 400 grain arrow and any draw length to get there speeds.
@Niko_4109 ай бұрын
As detailed everyone is with these reviews, I’m surprised that hasn’t come up a bunch
@JamesBond-oc4gm9 ай бұрын
80# but any draw weight? Hmmm imagine that 🤦♂️🤦♂️🤦♂️
@justonpohl49379 ай бұрын
@@JamesBond-oc4gm sorry was sapose to be draw length
@Bowfishinfreak18 ай бұрын
Measuring with a home depot paint stick. Ill have to mark you down for that 3.2/5😂😂😂. Great reviews love the channel!!
@TRAT0R4 ай бұрын
Just saw your tac video didnt relise you did so much more this is awesome buddy thanks for the video. Looking at one myself right now
@tarrysteven9 ай бұрын
Good review. The Hoyt Alphamax weighed under 4 pounds.
@tonyviers-de9qi9 ай бұрын
My hoyt maxxis 31 only weighs 3.6- 3.7ish?? Very light. Its good to see mathews moving back towards this and still moving forward with speed , features, shootability. I’m going to have to shoot this bow( maybe the 33 too)
@Trihope8 ай бұрын
I would give the grip a 1 since everybody immediately changes it.
@cadelelon9 ай бұрын
Josh, thank you for everything. That is all.
@hunteralmer9 ай бұрын
😂
@papaschuette9 ай бұрын
Hey Brother. Another awesome bow review for the best bow reviewer on the internet. I've always wanted a Mathews, but I can never afford one. And I won't be getting this one anytime soon. It is a badass bow for sure. Really appreciate you doing such in depth testing and holding the companies to their word. I'll see you on the 33" video.
@liamboyle91999 ай бұрын
Better off buying good 2nd hand bows mate, new bows are nice but don't get sucked in
@papaschuette9 ай бұрын
Hello. Oh yeah. I totally agree. I'm looking at a couple of Mathews that are a couple years old. Where the person had 2 bows already, then upgraded. And are now selling their extra bow. I have 2 bows right now. A 2007 Diamond Triumph, that I bought in 2018, and I just bought a brand new 2022 Bear Legit at the beginning of this year. I'm now wishing I would have waited on the Bear purchase and saved for a better bow. It's a good bow, don't get me wrong, but it lacks alot of features that the flagship bows have. I'll get a flagship bow one day. I appreciate the advice. Thanks.
@scottfrench61289 ай бұрын
Sounds like another great bow from Mathews. Will be keeping my Phase 4. I shoot at 55 lbs nd 26 inch dl. Not going to get any significant speed increase with the Lift.
@brianloeffler22459 ай бұрын
Exactly so spend your cash at the hair and nail salon. And that's an impressive draw weight for a woman. You must work out a ton. To bad there's not much of anything you can do being born so petite about your draw length. Nice to see woman so involved in the archery game. You go get emm girl !!
@skoolynugenator18028 ай бұрын
@@brianloeffler2245is their a reason his comment offended you considering the condescending response?
@SkyHounddroneservicesАй бұрын
I like when you wear Hoyt shirts to review Mathew’s and Mathew’s to review Hoyt , savage
@02LM79 ай бұрын
Only mathews would market a bow with the catchphrase “ lighter. Faster. Quieter” it’s lighter for sure, but it’s definitely not faster or quieter.
@stevenwalker90139 ай бұрын
Glad I didn’t get the phase 4 last yr. I’m getting the lift 29.5 this year
@omm77636 ай бұрын
This is a beautiful bow. Been shooting it now for three months. My only complaint is the draw cycle. And that's not very a big complaint
@juanrodriguez-mu7ko14 күн бұрын
Absolutely love it.👍🏽
@hunthealthy10189 ай бұрын
Welp, guess I'll be heading to my bow shop this weekend to give it a test run. Well done on the video as always! 🤙🤘
@dukeitsk96248 ай бұрын
Looks like PSE and Bowtech come alot closer to their speed ratings
@brendawells70254 ай бұрын
Would love to have u do a vid with the Mathews lift with 55 lb mods on it and back the limb bolts out to the the max to see what pound it will go down to for those of us that have lower poundage draw weights would be interested to know if the lift will work for us . Of course my bow shops have not got hands on 55lb mods yet
@NMBowhntr6 ай бұрын
Thanks JJ! Can’t wait for mine to come in. Great review.
@user-nx8vp5sy5d5 сағат бұрын
grip is ok, too thin for me still would give it a 4, its repeatable. the 33 balances doesn’t require any stabiliser for balance, issue when using a back bar find even with a 6inch with 1 ounce, the front 8 inch bar needs 3 ounces to balance the bow. its finky think i will drop the back bar and only frun a front. any suggestions on how to use an axcel landslyde through the bridge lock, i run out off right travel since the scope hits the travel screw. thanks
@Orr_s9 ай бұрын
This bow with tune-ability and features that Bowtech has would have been the craziest hunting bow to hit the market. The hype is cool and the lightness and speed sure but id almost sacrifice that to have the features and tune-ability to do myself without a whole press and draw board and shop. Only thing i hear is bowtechs servings and cables arent durable at all which is a little scary
@huntsimple95279 ай бұрын
The factory strings/cables on my Bowtech SS34 were garbage, the serving on the cables separated in just a few shots. I replaced them with Catfish Custom strings/cables and those have been perfect. Outside of the string/cable issue, my SS34 is easily the best bow I have shot in a very long time, and I have had all of the Hoyts, Mathews, etc. the past few years. The deadlock cam system on Bowtech is a feature that elevates Bowtech in a very big way.
@Orr_s9 ай бұрын
@@huntsimple9527 see thats so annoying to hear seeing as it has all those amazing features yet you have to change strings and cables right away and cant even get away with the factory set for half a season or more. I just went with Catfish too for my older RX-1! Havent put them on yet because i got them little later than expected when the season already started here but i went with all flo orange Vec-99 set. Great guy and customer service. Helped me on the phone. Heard great things and i was between Catfish, A3, threadz, or twisted X and chose catfish due to the bloodline material he uses and better lead times
@Orr_s9 ай бұрын
@@huntsimple9527 makes the choice for a new bow soon, little more torn now even.
@danconfer4269 ай бұрын
Hey! I’m a bow tech I talked to my Mathews rep and you can only take the limb bolt out 2 full turns compared to the usual three due to the smaller limb bolt you might have already k ew this but if not there you go
@scottfrench61289 ай бұрын
Thank you for another great review, Josh!
@l.i.archer53799 ай бұрын
The string angle on this bow looks absolutely awful at the longer drawlengths.
@iwilrage9 ай бұрын
Yup...now gotta buy a ton more mods and other accessories. Still using archaic system mixed with great tech.....nickle and dime ya...but they make a lot of money off of it.. terrible for dealers who have to buy the mods...they are not given.
@deathsucks139 ай бұрын
Any chance of a rx8 vs a lift video maybe the alpha x. I just see this as the bows that are at the top and would be great to see what you think shooting them side by side.
@petervansteyn53409 ай бұрын
I would love to see this as well. Seems like these are the two companies with most improvements/innovations this year and would love to see them head to head
@petervansteyn53409 ай бұрын
With both with 80% let off lol
@NMBowhntr6 ай бұрын
My only comment back to Mathews engineers when they say “we can build an aluminum bow better than a carbon bow” is, “Wake up. The customer is asking for a carbon bow from Mathews. Carbon bows aren’t a fad. There are a LOT of customers who would LOVE to have a choice of a Mathews carbon bow. And you are telling them to go buy a Hoyt or Bow Tech or PSE or Elite.” I’m in sales, too. And one rule of thumb I always use is to ask myself “what would my competition think of this strategy?” So I ask you, what would Hoyt and the other carbon bow manufacturers think if Mathews came out with an incredible carbon bow? Would they be all happy, or would it give them heartburn and cold sweats? Yeah, I bet the latter, too. So come on! Let’s see your best carbon bow, Mathews! Carbon is just plain cool for a lot of us, and we know you can do it. Look at those carbon guitars you make. You’re basically telling the top of the market bow buyers, who couldn’t care less about a price difference, to pound sand. How is that a good business decision? Best of luck to you. Hope you offer me a carbon bow someday.
@IIDASHII9 ай бұрын
Well nuts. I wish theyd done this earlier. I'm locked in on my VXR for the forseable future.
@user-eo9uj7hd9v9 ай бұрын
Speed didn't average 333. But what's 1 or 2 fps when it's 11 fps slow. 😮
@MrCaseywk9 ай бұрын
I was reading that their published speeds were ibo speeds.
@harrisonharding9 ай бұрын
Could you do a video explaining why you chose these particular measurements to judge a bow by? I'm still trying to learn and get lost some when you're spitting out these numbers. Thanks!
@JamesBond-oc4gm9 ай бұрын
My God the amount of people saying "test it correctly at 80# 400 grain arrow" 🤦♂️🤦♂️. It's the same as 70# and 350 ffs. (Not including the draw length some mentioned)
@ericgrant87839 ай бұрын
I’ve got one ordered, looking forward to it. Mine will be in 80% let off.
@hotshotelkslayer45479 ай бұрын
Ugggggg I like this guy and watch him all the time. I wish he would understand how mathews speed tests their bows!! They test IBO!!! Podium archer guy tests the bows at ACA specs!!!! Disagree with the tests mathews does but don’t call them liars and mark them down for not being close to your tests which are different than the way they tested…. I would think he would know!!!
@jakeg21949 ай бұрын
Confused a little by the bow’s performance. I chrono’d mine at 29 inch draw length, 70# cams, 440 grain arrow, shot 299 fps
@Sertao20137 ай бұрын
It’s fast but vibrants and jurks as the cam turns while the arrow is still on the string . Not smooth at all . This makes it hard to get a good grouping at .50 yards .
@perryknetter85778 ай бұрын
Thank you for sharing this great information
@adamredden20078 ай бұрын
I finally got to shoot one. The 33. The "the draw cycle is trash" crowd have to be biased. I mean, it's smooth from start to finish and I'm coming from a solocam dxt point of view.
@brendawells70259 ай бұрын
Mfjj if you were picking a bow to shoot out of the new bows which would you choose and why or maybe that’s a future vid? Love your input
@16912outdoors2 ай бұрын
What test do you honestly recommend for this or the 33? I’m leaning towards the hamskea epsilon but I’m not sure if I want the extra cord running all the way down to the limb. Also would be epsilon work with the Mathews low pro quiver?
@robturner27099 ай бұрын
You have a 4 out of 5 on speed because they advertised it faster and maybe I didn’t hear it but was that advertised speed with 80lb mods? So maybe they weren’t lying since you’re using 70lb mods?
@garyhall43269 ай бұрын
Great Review! Very Honest and non bias.
@neilbolan87689 ай бұрын
Great review. Keep em coming!
@DJ-xo9fc9 ай бұрын
Since Mathew’s uses IBO standards for speed test instead of ATA standards will you be doing a speed testing using the IBO standards?
@seantimmerman23609 ай бұрын
So freaking awesome! I can’t wait try one out!
@derekpatterson74169 ай бұрын
Interested that mathews isn't leading in the vibration with all they do to prevent it exspecially compared to other bows
@ryanoneil67479 ай бұрын
On the phase 4 video last year went from 85% to 80% and it only changed 1 fps
@michaelcolthart40069 ай бұрын
You should check draw length before you turn out the limb bolts.
@thepracticalrifleman9 ай бұрын
For a tree stand bow, which length riser would you go with? Seems this shorter version is smooth and stable.
@JH-hx2cl9 ай бұрын
They both work fine in the stand. If youre saddle hunting id probably want 29.5
@MJswam4AU9 ай бұрын
See I want the 33, but the shop owner told me to go 29.5 and that even he will be taking it out west and his 33 will be for 3D. But then one of his employees was pushing the 33 because ultimately is 3.5in or 1.75 top and bottom really going to get in the way when in the tree and wouldn’t you rather have a more accurate and forgiving setup. I’m torn, may just save the money from going 29.5 and applying it towards the new QAD
@o.n.e.wayhunting9 ай бұрын
@@MJswam4AU for the record, the 29.5 measured I believe at 29.75" for the riser length. My Mach 34 measures 29.5" for a riser length, and it's a 34" ATA bow, which holds and aims exceptionally well on target.
@nateb45439 ай бұрын
Pretty wild to charge $1330 for an aluminum bow. Its cool though, they're stabilizers are $250 and so is the quiver. The differences year to year better start gerring bogger to justify those costs
@kastboarder9 ай бұрын
awesome review! Even better that you're wearing a Hoyt shirt while reviewing a Mathews bow hahahaha
@imru35339 ай бұрын
Great job Josh! ~Dieter
@JH-hx2cl9 ай бұрын
the 348 fps was an IBO rating not ATA.
@joshstevens95289 ай бұрын
The bow's max DL is 30" though, so they are losing ~15fps going from 80# to 70#?
@JH-hx2cl9 ай бұрын
@@joshstevens9528 idk until someone tests it. Either way, people really dont take IBO seriously. ATA has a tighter standard.
@DavidBowCrazyBabyak869 ай бұрын
Just listened to you talking about getting out all the bow reviews out before everybody else in the podcast yesterday. I thought it was kind of funny that bow huntordied Had their review up early this morning
@nicolasmora53959 ай бұрын
I really can’t decide if I like that riser. Part of me is saying it looks awesome. The other half of me can’t decide. For the first time in my life, I’m bi-curious. 😕
@justinwallace90459 ай бұрын
The reason people hate on Mathews isn't because they're bad bows, they're excellent. It's the "fandom ruins everything" mentality. Same reason a lot of people hate Glocks and Milwaukee tools. I like Mathews bows. I've shot a couple older models and liked them but I have two friends that have them and it doesn't matter what you shoot, if it's not a Mathews it's a POS and belongs in the trash. They've done enough innovation with this one to make me consider one for the first time, although the cost of the accessories still may have me leaning towards the Hoyt.
@JH-hx2cl9 ай бұрын
Dude i hear that. But you get what you want dont worry about the internet tribalism, that stuffs gay anyways. The accessory price really isnt that difference except the bridgelock stabilizer. Its about 100 bucks more, after you buy that youre done. I was going to buy an Alpha X but this Lift bow is ridiculous.
@timgratton28699 ай бұрын
I have Mathews vertix love that bow
@brianrobinson79729 ай бұрын
I love your reviews !! But where are you going with it are you going to do a leader board ? Best hunting most forgiving ? Just asking nothing but respect
@TheIVSaken5 ай бұрын
I think I may be the only person who did not like the lift. Although the price to own one may have soured me before I shot it. But to pay that much for a bow, then to get charged more on accessories to get the special "Mathews" brackets to be integrated.. Or now you need these bridge lock stabilizers instead that cost 3 times as much... its too much
@dakotadickens89029 ай бұрын
Few things 30” draw and 70 pounds is not ibo. Put in 80% left off and 80lb mods at max draw. There is your ibo setup. 30”-70# is ata speed test. It’s a mistaken assumption that thes bows ibo on 30-70 because that used to be the common top end. It’s no longer the truth. Ibo means max everywhere. I’ve personally had talks to companies directly about it. Aside from that it’s plenty fast. Grip gripe is from those that just simply can’t and I mean can’t shoot a rounded grip due to their own issue. It’s a easy and cheap fix all the way down to free. Just pull it off honestly or shoot side plates that mathews makes. I do not count points off for options available or if something is for sure offered through the manufacturer of a product. To each their own. I shot 3 bow techs today. 4 hoyts and the 29.5 mathews. I still know which on I bought and the bottomlands camo and granite limbs will be here in Marchish. But to end it ibo isn’t regulated, ata is so either everyone needs to advertise ata or everyone needs to learn that ibo is max effort from the bow. I’ll put money that at 80 lb and 80% max draw the bow hits 348 to 350
@tingtu68789 ай бұрын
You are quite pro Mathews this year:)
@noaht2159 ай бұрын
💡🤔Make a ‘Podium’ Grip for Mathews bows!!
@noiwcm9 ай бұрын
A genuine question, is the IBO speed really off? IBO is 80 lbs 400 gr arrow and max draw so them saying up to the speed probably isn't wrong.
@DavidRod.9 ай бұрын
Is there a rolling spreadsheet or something that can be seen with all the bow reviews and where they fall for each category?