Polish/Wax Your Car with these SPTA Polishing Pads

We are putting SPTA foam polishing pads to the test! Is it worth it? Watch our video and decide for yourself. HINT: These definitely pass our test! Order here www.amazon.com...
Here is the link to the polishing compound we used during the video as well. www.amazon.com...

[@mrjermainereid8059]

speed 6 your mad people think by going at speed setting 6 you get more done no no no low speed = better finish plus the paint gets too hot on speed 6

[@g..3095]

did you even wash the car first? lmao

[@kandiecandelaria3134]

Can this be used to polish epoxy? And which would you use? Blue? Mine came with green, red, orange, blue, yellow

[@jrnyman78]

Imagine how well the pads wouldve eotked if you knew what the hell you were doing. No method to your passed, just wildly moving the polisher around Starting out on speed 6 instesd of spreading the product out evenly then incrrasing the speed. You never polish on speed 6 especially whrn you dont know the capability of the pad/polish combination . Thanks for the vidro. I actually got something out of it evrn though you fidnt do anything correctly.

[@henryflores7492]

I bought a set and it came in this order. Yellow, White, Black, Blue and Orange. Am I supposed to use them in that order?

[@jasonclemente4392]

No you should start with the softest first. You want to remove the least ammount of clear coat. Polishing is liquid sanding Use polishing first to see if you really need to cut .

[@jambojambo313]

Used them as per instructions with an orbital sander (low speed) & buffed to finish - worked perfectly. 👍

[@EazyELowzCompton]

You gotta tape the rubbers and plastics to avoid damaging them.

[@as680783]

Cheers for this. I use a lot of SPTA gear. I've go the rotary polisher, 5-inch 15mm throw polisher, and numerous pads and backing plates. The pads aren't as substantial as Lake Country and Rupes etc., but they're great value and can be washed and reused numerous times. I'm on my eighth time using the orange and burgundy pads and they're holding up fine - yes, even the velcro.

[@Dariopresidente82]

Non si lucida mai l'auto al sole, la carrozzeria deve essere fredda non calda per di più auto nera al sole... la pasta asciuga troppo in fretta e non fa il suo lavoro al 100%

[@iyona14granturismogt6gtspo7]

$12 bucks each for chemical guys pads...those kids out for money

[@emjilarson7372]

Bro i cringe watching your video. Detailing is step by step but you skipped some and the way you put compound is way too much. Have you even researched before doing this paint correction 😂??

[@patrickroos739]

Im sure your a pro...and not only that, you were probably never a beginner, just started out like a pro from day one. Am afraid I just cringe reading your helpful comment.

[@tegteg798]

What's a good budget pad you would recommend from a business prospective

[@as680783]

I use these for my valeting business, but I do have an arsenal of Lake Country pads HCC (about 30) which I've purchased over the last year but not needed to bust out.

[@willevans985]

Just bought and used these then found this video😂. I wanted an all in one pack to use every now and then. As per video , I can second they seem great value and surprised at their performance.

[@fs.audi.8p]

Is that a rotary polisher Great video

[@henryflores7492]

Hello

[@emjilarson7372]

Your passes is also out of order and looks very random.

[@spta2091]

👍

[@camilomino6614]

What RPM we need to use for a better cut ?

[@m-gear2260]

3800 to 4800