Honda CR-V LED Interior - How To Install 4th & 5th Gen | 2012 - Present

[@ncooty]

@1:16: Thanks. Very useful. Really like when you guys show these side-by-side comparisons and compare things like lumens, color temperature, and amp draw (wattage).

[@PrecisionLED]

Thanks for watching and for the helpful feedback! We will definitely try to do more of that in our future videos as well.

[@SarbjeetSabi]

works for 2017 also if anyone wondering! took about 5 minutes if u have a thin sharp tool

[@josephsaeteurn9158]

are you sure? the 2017 license plate bulb does not look like this video. can you post a video??

[@PrecisionLED]

Thanks for watching!

[@andresmith585]

Just picked up a '12 CRV EX-L and interior and exterior lighting will be the first mods that will take place. Did this on my other vehicles and it does make a big difference.

[@PrecisionLED]

We definitely agree!

[@jasonbabila6006]

It’s 2023 and I ordered the premium kit, I’m getting ready to replace the incandescent bulbs with the LED bulbs.

[@francistorr53]

This is how you make a video... well done.

[@PrecisionLED]

Thank you so much for the kind words!

[@КаренАрутюнян-ы8е]

Большое вам спасибо за чёткое и профессиональную съёмку. Языком не владею ,но прекрасно вас понял на видео. Жму руку..надеюсь дружественную)

[@MiguelAlvarez-dh7kf]

Awesome video. Thanks for the info

[@ncooty]

Thanks. Would've been nice to see old and new illuminated side-by-side for comparison.

[@PrecisionLED]

Noted! Our newer videos have comparison shots at the beginning and end of the videos!

[@jesussolis6356]

Awesome man, you made the whole process easy. I will give a shot, Thanks

[@PrecisionLED]

Thanks for watching, we hope it goes smoothly!

[@patricknuguid8633]

Very useful video. Thank you!!

[@anthonypovio5504]

Do you have instructions on changing the fog lamps on a 2017 CR-V?

[@victorocon9187]

Really good job

[@rags5162]

Nice video by covering all. Thanks

[@ElJefe7771]

Great video, very clear and detailed, just a quick question. Why did you use a canbus T10 for the licence plate?

[@PrecisionLED]

Thank you for the feedback. This is because in many cases, the Premium 5730 T10 LEDs are slightly too long for the license plate housings. The T10 Canbus LEDs are just the right fitment.

[@upondivineguidanceorder2548]

@@PrecisionLED i was wondering if you may have an idea Unfortunately my interior lights don't work meaning map lights and front left and right light I changed the Fuse and Bulb And still No success Do you have a clear what could be the possible issue...?

[@thegeorget1]

How long do They normally last ???? Thanks I enjoyed see the video, I have a 2016 crv and looking to up grade soon

[@PrecisionLED]

The lifespan of the bulbs can vary depending on things that are out of our control (i.e. battery efficiency). However, I would expect LEDs to last 2-4 years. We do back all of our products with a 1 year warranty.

[@MikeMorgan]

My 2016 EX-L arrives in less than two weeks, and I found this video randomly...very nice! I'm quite impressed with how easy the installation looks, and the end result is stunning. How much longer to these LED's last as opposed to the stock halogen bulbs?

[@PrecisionLED]

Thank you for your interest. LEDs are rated to last anywhere from 3-5 years, depending on use. We do indeed back our products with a 1 year warranty.

[@MikeMorgan]

Thanks, just bought a kit from you guys...can't wait to get it installed :)

[@PrecisionLED]

Thank you for purchasing with PrecisionLED. If you have any questions or concerns with your installation, please do not hesitate to contact us directly at [e-mail]. Enjoy the LEDs!

[@GalacticGuru42]

Great video. Do you also have sequential-turn / -indicator LED strips to upgrade the stock fixed lights in 4th gen CR-V?

[@PrecisionLED]

Hi, unfortunately at this time we do not advertise the turn signal upgrade to LED because it may hyperflash when ignited. We are working on a solution for this, so stay tuned!

[@GalacticGuru42]

@@PrecisionLED okay thanks, I'm very interested in the sequential LED lights, that are becoming common on newer vehicles

[@ceez1]

That covers only one side. What about the other bulb?

[@Gbuck426]

Which is the most popular color, Crystal White or Cool White?

[@PrecisionLED]

The crystal white 6000K is the most popular choice as it is a pure white color with the best visibility.

[@preetboy143]

Really helpful video.. Thanks so much dear..

[@PrecisionLED]

Thank you for watching!

[@Ihaveadashcam]

Do kits come with glovebox,trunk,and armrest led bulbs.

[@PrecisionLED]

The kit would come with the trunk LED. However, we have listed the glove box and arm rest light would be stock LED, which you cannot replace as it is soldiered to a chip and board.

[@ryanstreasure1295]

2015 Honda CRV do yall make led bulbs for tail lights and turn signals? If so can you put up a direct link for a LED tail light brake bulbs and turn signals? I recently just replaced all my halogen bulbs for led bulbs on the interior and the hi beams and fog lights and lo beams what a huge difference it made very satisfied with your LED products!!! But now i need to replace my tail brake light bulbs and turn signals. Do you make bulbs for the brake lights and turn signals for a 2015 Honda CRV EX

[@PrecisionLED]

No, we do not sell LEDs for the brake lights or turn signals, as they would hyper flash when ignited.

[@SergioAlexandro]

The vanity mirror did not use 6mm,maybe it is 31 or 29 but no 6 definitily.

[@adrienettebestshipyas7191]

Omg thank you so much

[@marcellus-br3981]

Hello friend, I'm from Brazil. Congratulations on your video, I liked it very much, I found it interesting and very professional, I learned a lot with your explanations. Do you have any videos with CRV 2010? Thank you very much. hug.

[@PrecisionLED]

Thank you for your interest. Unfortunately not, however, the installation process should be very similar, if not identical to this video shown.

[@ryanstreasure1295]

2015 Honda CRV Ex what bulb would i need for the license plate lights? Thanks Ryan

[@PrecisionLED]

Thank you for your interest. We do have listed you would use the T10 5SMD LED for your license plate lights.

[@reys_live7243]

Good job

[@carlosalfaro7918]

Hello friend, I had a problem putting my LEDs, I put the two in front and everything was fine, then I tried to put the one in the middle and it took me a little to remove the focus, then I wanted to put it and put the LED did not turn on, and then I realized that I didn't turn on any of the ones I put ... What could have happened, ?? It should be mentioned that he had the car on in accessory mode.

[@PrecisionLED]

Without seeing the actual vehicle it would be hard to tell. You may have blown a fuse, in which case you could simply replace it and you would be all set to continue. Did you purchase your LEDs from us? In which case please reach out to us at [e-mail]. If not, it is important to note that you need to install high quality canbus LEDs that are compatible with your vehicle.

[@calmanstrugglez]

License plate lights are different on 2018

[@waqassaleem3708]

I wish you would do one video for. 2017 pilot touring.

[@PrecisionLED]

We will keep an eye out for a 2017 Pilot out here in Los Angeles for an updated video. However, the installation process should be very similar to the 2009-2015 Pilot installation video, which you can find here: kzbin.info/www/bejne/o3PXYqCYmJJ6p8U

[@mohammad.smustafa7517]

Hi there I have cr-v from 2015, but I don't know which one use high beam? because you show H11 LED for low beam.

[@PrecisionLED]

Thank you for your interest. Your high beam would use a 9005 bulb type, which you can find here: www.precisionled.com/premium-9005-cree-hl-gl-headlight-led.html

[@BertTirona]

Great video! Thank you Phil! Can you share the names of each LED light you used?

[@PrecisionLED]

The map would use the T10, the vanity mirror would use the 29mm, the dome would use a T10, the reverse is a 3156, and the license plate would be T10.

[@jus4getLovv]

Nicely done!

[@PrecisionLED]

Thank you!

[@rrtanhuy1471]

Hi is this the premium led lights or interior led lights kinda confuse on your site there is two option on it.and i can't find the led bulbs for my headlights and fog lights on your website-2015 CRV

[@PrecisionLED]

The Premium LEDs are installed in the video. The difference is the new Premium 5730SMD LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 5730 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 5730SMD LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. And of course, all of our interior 5730 LEDs are backed by our lifetime warranty. You can find the headlight kit here: www.precisionled.com/honda-cr-v-premium-led-headlight-package-2012-2015.html And the fog kit here: www.precisionled.com/premium-h11-cree-led-headlights.html

[@enriquereyes8363]

Are these 6k or 8k bulbs?

[@PrecisionLED]

Thank you for your interest. The 6000K LEDs are used in this video.

[@edgardoamado7008]

Would the back up LED bulb fit a 2010 crv ??

[@PrecisionLED]

Yes, the reverse LED for the model shown in the video is a T20, which is exactly what the 2010 CR-V uses as well.

[@J_T_B_]

Tkanks man...Brazil

[@PrecisionLED]

Thank you for watching!

[@Ihaveadashcam]

Do you know where i can get 2007 accord headlight bulbs

[@PrecisionLED]

Thank you for your interest. You can find the 2007 Accord Headlight kit here: www.precisionled.com/premium-9006-cree-hl-gl-headlight-led.html

[@Ihaveadashcam]

Where can i get the headlight and fog light bulbs for 2012 crv

[@PrecisionLED]

Thank you for your interest. You can find the kit for your high/low beams here: www.precisionled.com/premium-h4-cree-hl-gl-headlight-led.html And your fog lights here: www.precisionled.com/premium-h11-cree-hl-gl-headlight-led.html

[@waleedamir9583]

Alan Shcherb دعےخ7ئیهعرتئججگسهج

[@waleedamir9583]

Alan Shcherb فرعگجخخففففتچطهترفخخهففگتےییئیییئ

[@waleedamir9583]

Alan Shcherb فگتی گ تئجگهئ

[@waleedamir9583]

PrecisionLED ع ت یکیگددففگخ ہل ی32ےئہکخخهگفوووجککہ12356ئ8ہہپپپ098876554421

[@waynevaughan5815]

hi my name is Wayne. i like it

[@PrecisionLED]

Thanks for watching, glad you enjoyed it!

[@leonblack751]

Awesome

[@PrecisionLED]

Thanks for watching! 👍

[@faithfulgiant_8468]

Hello, I just purchased the 2017 CR-V, do you have any videos on how to change interior on this vehicle???

[@PrecisionLED]

Thank you for your interest. The installation on the 2017 should be virtually identical to as shown in this video. All of the LEDs are typically very easy to access with our trim tool kit.

[@jus4getLovv]

Can you buy those LED lights as set to replaced all those existing halogen lights? And how much will it cost to all those kits?

[@PrecisionLED]

Thank you for your interest. Yes, there is a direct product link in the description of the video. If you are looking to swap all of your halogen bulbs to match the LEDs installed in the video, you would be sure to add all of the additional options via the dropdown menus.

[@Ihaveadashcam]

Whats the difference between regular and premium bulbs.

[@PrecisionLED]

The new Premium 5730SMD LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 5730 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 5730SMD LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. And of course, all of our interior 5730 LEDs are backed by our 1 year warranty.

[@Ihaveadashcam]

The beams don't need to be adjusted right.

[@PrecisionLED]

Thank you for your interest. No, it is not typically necessary to adjust the beams after installation.

[@samuelkwon5824]

Is this illegal in California?

[@PrecisionLED]

The legality varies vastly from locale to locale and you will need to check with your local laws and regulations. What we commonly dissuade customers from, and what is illegal, are any colors above 6000K, as they are prohibited by the Department Of Transportation. Any color hues in your lights are very distracting to other drivers which is why we only carry the 6000K headlight color temperature for the headlamps, as they project the purest white.

[@Ihaveadashcam]

Do you need can bus bulbs

[@PrecisionLED]

It is always best to install Canbus LEDs to ensure you do not experience any dash errors, flickering, or other issues with your lights. We only carry high quality Canbus LEDs.

[@hazemothman6699]

How much it please?

[@PrecisionLED]

Please check the description box for links to the products. Thanks!

[@joseantoniotapiamoreno9578]

subtitulos en spanish plese todo el video

[@PrecisionLED]

We will try to work on getting subtitles in the future!

[@jsflenindvd]

Is the reverse LED 6k or 8k?

[@PrecisionLED]

The reverse LED on the installation video is 6000K Crystal White.