Press Pull vs Extrude in Fusion 360

Mastering sketch constraints is the key to being able to design whatever you want
Get my free Sketch Constraints Cheat Sheet at: desktopmakes.ck.page/83a875e345
Quickly get up and running with Fusion 360 with my Quick Start video series at: courses.desktopmakes.com/p/qs...
Must know difference between Press Pull and Extrude in Fusion 360.
Learn what the difference is between the extrude tool and the press pull tool. In summary the extrude tool well, extrudes, while the press pull tool can extrude, fillet, and offset faces depending what you select. Watch till the end where I show some useful techniques of the offset faces feature.

[@gristc]

Great explanation. Easy to follow and no fluff. I wish I had more than 1 thumbs up to give.

[@partsdave8943]

Best explanation I’ve seen for this!

[@DesktopMakes]

Thanks Parts Dave!

[@markanderson1519]

This is the first video of yours I have watch and I am impressed. You taught be some very useful things in a brief period of time.

[@larsord9139]

Now if I can just remember this!

[@BrianFDeVore]

Excellent answer to this noob question, exactly what I was looking for!

[@river2000sg2]

Thank you very much Sir, finally I understood the difference between these 2 tools.

[@piyushpalsania7685]

Thank you Desktop Makes I understood the difference

[@DesktopMakes]

Thanks Piyush Palsania. Glad you found it helpful.

[@nesamark]

As always, excellent. concise, short and clear!

[@epnasis]

wow! thank you! you just made my day with these real-life examples! fantastic!

[@philippe5394]

As said below, excellent. concise, short and clear. It's pleasant to learn with you. Many thanks from France

[@Dorff_Meister]

Oh super helpful! I've been using Fusion 360 for over 3 years and didn't understand the nuances of Press / Pull. Thanks!

[@MateuszPolkowski]

Perfect! Thank you! Exactly what I needed. :)

[@LiveMusicOntario]

I bookmarked and saved this instruction. There is so much good stuff for a rookie like me, and I can follow it clearly because of the good timing and the commentary.

[@kwissiekwissie]

GREAT examples and CLEAR explanation. Quick end straight forward!

[@sunpeter8260]

Excellent! Thank you so much! I didn't know there are so much differences between the 2 tools before!

[@sefakavlak7533]

thx. it helped me in a crucial time.

[@jamesbarratt593]

Basically logged in my brain now that its a way to thicken curved surfaces. Thx pal

[@DesktopMakes]

You're welcome!

[@schlameel]

This is a simple and EXCELLENT demonstration and explanation. Thanks.

[@garagemonkeysan]

These short 360 videos are great. Glad you don't use hot keys. Thanks for sharing! : )

[@DesktopMakes]

Thanks garagemonkeysan. Yeah, I try to avoid using hot keys on my tutorials. I remember how frustrating it was when I was learning Fusion 360 and trying to follow tutorials that used them.

[@francispointofview7578]

I like when you teach me something that I've overlooked 1000 times. Keep up the fusion videos! Very helpful

[@DesktopMakes]

Glad to hear Francis. Thanks

[@arvinclassics]

Good, concise video. Good job, thanks!

[@DonnTarris]

That was great, saved me a lot of time!

[@Johncoffee2002]

Greay Vladimir, finally a good explanation of the differences Extrude vs Press pull! From now on I’ll use press pull much more! Thanks a lot for this quick tip!

[@DesktopMakes]

Thanks John, glad you found it helpful. More to come!

[@KHIMAIRA2110]

Very nice video, thank you.

[@eghterafi]

very well explained, learned a lot.

[@JAYTEEAU]

Thanks Vladimir, really well explained

[@DesktopMakes]

Thanks Jaytee.

[@markustube]

Another excellent, clear and concise video Vlad... thanks!

[@DesktopMakes]

Thanks markustube!

[@hoggif]

Extremely clear demonstration! Thanks a lot!

[@DesktopMakes]

Thanks!

[@roncooper6302]

I hate you! Why didn’t I experiment with that. Extremely well presented, only just discovered you and subscribed immediately. Best regards from England.

[@PhDTKM]

Thanks Vlad, probably the most useful, easily understood, and enlightening tutorial for beginners I've come across yet - Thanks! What I appreciated most was your commentary that talked through each action, using specific names of functions and parts instead of generic terms like, "this guy, over here, I'm just gunna go do this, etc. etc." which only frustrates the fire out of me when I'm listening to other tutors. I've subscribed!

[@DesktopMakes]

Thanks Dave. I really appreciate the nice comment and feedback. It's good to know that being specific with function names and parts are very helpful. I'll keep that up.

[@homelessguy6947]

Very clear and helpful

[@vladimirnikolin3160]

Very nice. Very helpful

[@thomauga]

Thanks ! Very usefull video !

[@Know-Way]

Excellent! Thanks.

[@Osgood913]

I am just learning Fusion 360, thanks for the video, it was very helpful.

[@DesktopMakes]

Glad to hear it Alexey. 👍

[@adambergendorff2702]

another great video, thank you

[@DesktopMakes]

Thanks Adam

[@Keith-lu4rh]

well done a no nonsense teacher right to the point Thanks

[@DesktopMakes]

Thanks Keith!

[@thebeastbrothers]

Thanks 🤩

[@FushigiMigi]

Thanks!

[@spikekent]

When you first read the question, my first thought was 'I think I know most of this' (but that never stops me watching). I was completely wrong. It turns out I knew very little. Yet again, you've shown me a ton more functionality. Great work Vlad and thank you.

[@JAYTEEAU]

I'm an F360 n00b so this was really helpful

[@DesktopMakes]

Thanks Spike. Glad you kept watching.

[@lantechbd]

Ooo man. Thank you!

[@fdm225]

Very nice explanation

[@DesktopMakes]

Thanks David!

[@ianmcleod8898]

how deep into fusion do you go? surface modeling, patch work space, forms?

[@KLNYC]

Im still learning as I go.

[@RonFloyd]

In Press-Pull, what is the "Automatic" option used for? Thanks for the video.

[@JAYTEEAU]

Good question Ron

[@PonteRyuurui]

subbed

[@DesktopMakes]

Glad to have you Ponte. Enjoy the channel!

[@robguyatt9602]

Cool :)

[@DesktopMakes]

Thanks Rob

[@Art_911]

One other note: Using the press/pull on a "hole/cutout" you will NOT get the option to "cut/join/..." So you just end up just moving the face. With extrude on the same face, you get the option to cut, join, etc.

[@rehab-labcmrrfkerpape8836]

Hi, I use Fusion 360! When I use the arrow to Prees/Pull, the value change with a step of 5mm. I want the value to change with a free step. How can I whange this parameter?

[@DesktopMakes]

Hi RehabLab, instead of pulling the arrow simply type in the distance you want to press/pull.

[@rehab-labcmrrfkerpape8836]

Ok, I find the solution. I had to deselect themode 'Increment Move'

[@theforgottenheroes3995]

One video on engine assembly parts.

[@kingofcastlechaos]

You started strong and once you jumped into Fusion360 all the audio became mumbling. Just an observation. Keep up the .........(trails off into mumbling) lol

[@francispointofview7578]

Maybe go over knurling?

[@monkeman2136]

burber binf but betis