PRINCE Automatic Lighter Restoration Asian Buddha 1950s

This was a fun video to make. I’m still learning and welcome positive, honest feedback. This lighter is from the 1950’s and has a great wrap of some interesting Asian Gods and Buddha.
Please Like and Subscribe. Help me get to 500 subscribers.
To also help support the channel I do accept donations through Cash App: $JesseeBeelements
Please follow and Support my Patreon page as well you could win a restored Lighter.
/ herrtweekcat
Thank you everyone for all the Likes, Shares, Comments, and Views. Your support means everything, thanks a million.

[@T_B]

New subscriber here. Why? Because of the stupid Dad joke and ACTUALLY taking the time during editing to block-out the drilling process!! 🤣 (The restoration was on point, too). Keep the funny attitude man! We are all looking to watch fun content like this. 👊

[@HerrTweekCat]

Thank you so much for the follow and kind words. I’m working on another video just like this one as we speak. Stay tuned 😃

[@UltraMagaFan]

Even though I’m not a Buddhist, I still think these lighters are pretty neat. I saw one online for $10 a few weeks ago. I regret not buying it.

[@HerrTweekCat]

It was one of my favorites in my collection. Keep a search open on eBay and you might find it again. I’ve see it a few times, even mixed in with a LOT sale of lighters. Best of luck!

[@Domarikat]

i just inherited one of these from my great uncle. not the same company but same system. it belonged to his father originally (my great grandfather) and i actually much prefer it over the zippo i have been using for a few years now.

[@alinawendt1914]

As good as new! My favorite parts are always the surprise cameos. SuperCat mug ⭐️

[@annafields6584]

Thanks so much for the video. I was able to fix my vintage Star-Lite lighter by following along. Didn’t know if I’d ever be able to get it back together, but I finally did, and it works!

[@HerrTweekCat]

That’s fantastic! I’m so happy you got your lighter operational again. Take great care of it and thank you for the nice comment.

[@supergalaxycrazykillerpsyc3079]

Hehe love these lighter restorations

[@HerrTweekCat]

Thank you, I will have two shorts this week and a big restoration in a couple weeks. Stay tuned for more videos.

[@HerrTweekCat]

I absolutely loved making this video and I will continue to answer any questions about lighter restorations. Some of my current videos are about Investing (personally and financially) and I would love it if everyone could participate in a series I call “Investing Your Lunch”. Thank you for all your support.

[@RESTORATIONOFSCRAPMETAL]

Cool project and Great job👍

[@HerrTweekCat]

Thank you very much. I have another video like this one posting in about a week.

[@brianrobinson75]

Hey man thanks for showing me this I just bought a lighter and I am terrible with fixing things but this seems doable and you've inspired me to try

[@HerrTweekCat]

Thanks for the comment, definitely give it your best. If you have any questions don’t hesitate to ask. Best of luck and I hope you subscribed, I plan on making another lighter restoration video this month. I also have a restoration playlist of other lighters that might help you plan your restoration.

[@richardschneider4775]

zer gooooooooooot herr Tsweek cat

[@dinaakter6782]

Very nice

[@HerrTweekCat]

Thank you very much, new video coming out this week.

[@bendocherty4]

Hey I was following this video and just dropped and lost the spring that sits under the action button.... do you have any idea how/where to get a replacement part for this?

[@HerrTweekCat]

I’ll check this afternoon to see if I have an extra.

[@HerrTweekCat]

@bendocherty4 I did not have a spring for this specific lighter, what I’ve done in the past is look on eBay and try to find one for parts. Best of luck with your restoration.

[@quattuorphotography8107]

Thank you! I'll do this to my lighter. So you use WD 40 at the beginning for 24 hours? Where did you get the new wick?

[@HerrTweekCat]

Yes, WD40, but I’ve gained a lot of experience since this video. If your lighter is in similar condition as this one, you can soak for a lot less time. Start with 30 minutes and see how it’s progressing. Also only on all metal parts. I also use a dish soap to clean the oil and non precious metal jewelry cleaner with a soft toothbrush. I have a ton of junk lighters so I might pull a wick off one if it has a similar gauge. So many lighters will fit the common zippos replacement wicks.

[@k0fadanks848]

Hello! I have a very similar lighter with the same geared flint wheel as yours. My only problem is that it won’t spark! The wheel won’t spin when the button is pressed due to the steel pushing against it. When the steel isn’t in, it rotates just fine. Any possible tips?

[@HerrTweekCat]

If it’s a brand new flint, it might just need to be struck a few times so the sharp edge is worn off. Maybe try taking out the flint. Then slowly turning the flint wheel. As it rotates, use a small pick to clean the flint wheel. See the video I did for the USMC Evans Lighter. If this doesn’t help let me know and I’ll make some more suggestions.

[@k0fadanks848]

@@HerrTweekCat looks like that didn’t work :( I was wondering however, what are the teeth on the wheel used for, if there’s nothing moving them?

[@HerrTweekCat]

I sold this lighter about a year ago so I can’t look at it, but if memory serves there was a small insert that almost looked like a hand pointing it’s pointer finger out. That pin on the hand would rotate down when you press the action. That “finger” like pin would push the gear over. It’s located under the cap. Take the lid off and see if it’s still inside. If it’s worn down that might be the culprit.

[@k0fadanks848]

@@HerrTweekCat alrighty. Well I already disassembled and try to do a few repairs already, however there was no piece like that. I bought it broken from an antique mall.

[@HerrTweekCat]

@@k0fadanks848 keep your eyes pealed on eBay, I’ve seen this lighter pop up a few times over the last few years. If I see it, I’ll give you a heads up.

[@oscarbarcenas1717]

I just bought a similar lighter, but I dont know how to change de wick

[@HerrTweekCat]

Usually a Zippo brand wick will fit but if you need a thicker wick you’ll need to pull it from another lighter that’s considered junk. Pull out the cotton from the bottom, pull out the wick. Then put the new one in, pack cotton around it as you lay the wick into a S shape inside the lighter. Once the cotton in packed in, add fluid and light. I can make a video if you want, just let me know.

[@Cyberbanditmx]

How many tried you have to push to get it lit?

[@HerrTweekCat]

Just a few turns to get the grove set on the new flint.

[@Cyberbanditmx]

Thanks

[@conorgrady5706]

I love the video! Very helpful. What solution did you use to clean the metal?

[@HerrTweekCat]

My solutions vary from lighter to lighter depending on what it’s made from and its corrosion level. On this lighter, if memory serves I first used a gentle mix of dish soap, very little soap, then a small mix of jewelry cleaner but it needed to be for non precious metals. Some of the components were also soaked and cleaned with WD40. You just need to be very careful on what you put on it and how it’s applied. Sometimes what’s good for one part of the lighter will harm another. Hope that helps.

[@rafaeltorre1643]

I personally use alcohol (sanitizer) because its thick, and cleans then polish after.

[@ВиллиВильсон-й9б]

What is the yellow statue at the end of this movie ? Is it Homer Simpson ?

[@HerrTweekCat]

Yes, it’s Homer Simpson. He’s holding a pretzel and beads. Made by Kidrobot

[@crisgarcia5925]

Do you by any chance know where to find the full round gear? I bought a lighter and it’s all good to go except for it’s missing one of those

[@HerrTweekCat]

If it’s the sprockets that rotate the flint wheel, you can usually pop them out of another junk lighter of the same or similar make. Sometimes you can find a “vintage lighter lot” sale on eBay pretty cheap. That’s what I’ve had to do. Also, there have been some lighters that I couldn’t fix 100%, so I’ve saved them for spare parts for other rebuilds.

[@HerrTweekCat]

I saw this on eBay, maybe you can use it for parts. www.ebay.com/itm/Vintage-Cyma-Lighter-Asian-Theme-/132830746713?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0

[@xRainyyDayy]

So would it ruin the lighter if I use butane to fill it back up if it's a similar one to this? Or is it better to stick with ronson lighter fuel?

[@HerrTweekCat]

A lighter will only work with a lighter fuel or butane depending on the fuel storage chamber and how it’s designed. If you can open the fuel storage with a screwdriver it needs lighter fluid. It can be this brand or zippo or another similar brand. If the lighter has a special refill valve to add butane, you would need to match the right fitting to that specific valve or refill nipple. Look up the brand Blink to get an idea of what I mean, some of their cans come with several refill valves to match older lighters. Let me know if this helps or if you have any other questions. Best of luck After thought, also look up a brand called Newport Zero, theirs comes with valves to for butane.

[@xRainyyDayy]

@@HerrTweekCat Thank you thank you thank you!! My vintage pgl lighter seemed like it needed butane but after reading your comment and watching the video I realized it actually needed lighter fuel.

[@rafaeltorre1643]

@@HerrTweekCat Newport zero! Glad I saw you recommend that as it has the best quality tips that you don’t have to tear off and solves almost all problems. So people don’t get confused they are called adapters or tips. Use plastic nozzle butane canisters for better seal. I rarely hear butane spray since I’ve found what works best!

[@AI-tt7zo]

Could I pay you to restore my lighter? It’s a Prince Gardner? 🙏🏼

[@HerrTweekCat]

I’d be happy to take a look to see if I can fix it up for you. I added my website to my about page. On my website I have a contact email. Send me a few pictures of the lighter and we can move forward from there.

[@ethanlyon2]

👋 hi

[@bobblossom2713]

In English, it is spelled cotton

[@HerrTweekCat]

I can’t believe I misspelled “cotton” at 6:28. I’ll see if there is a way to correct it now that the video is already posted. Thank you for catching that. I need to have you proof my future videos lol haha

[@НиколайКупец-ы1ж]

Greetings from Ukraine! Where can you buy such a lighter? Link please?

[@HerrTweekCat]

The lighter is from the 1950’s you would need to see if you can find it online or perhaps an estate type sale. I have seen it before on eBay. If I see it again I will send you a link. Thank you for the comment from Ukraine. Dyakuyu

[@HerrTweekCat]

Found one on eBay, it looks like it needs repairs but I remembered you asked me to look for you. www.ebay.com/itm/Vintage-Cyma-Lighter-Asian-Theme-/132830746713?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0

[@raihanfarrelofficial]

2:09 Censored

[@grahamparr3933]

Is subscribe a German word?

[@HerrTweekCat]

No, ‘abonnieren’ would probably be the best word in this situation.

[@sudeendrareddy6385]

Bro where can I get it

[@HerrTweekCat]

Found it on eBay and sold it last year. I usually keep all of the lighters but sometimes sell them on eBay or even my personal website www.Beelements.net. I have been so covered up lately and have plans for two more videos. Please follow and I might do a giveaway on the next video if I can get 50+ likes on it.

[@sudeendrareddy6385]

Tq bro. hope I'll going to be win that

[@sudeendrareddy6385]

Bro heart pls..

[@sudeendrareddy6385]

Bro, what I want to search for exact lighter that u have restored..

[@HerrTweekCat]

@@sudeendrareddy6385 If I come across one or see one I’ll let you know 100%

[@jra7283]

9:17 Is it same lighter?

[@k0fadanks848]

That’s what I’m wondering

[@HerrTweekCat]

It is, I just thought it would look good being lite in the dark.

[@ChrisP.Bacon1]

Every restoration video is the same like they all copy each other