ProArt Cooler with a ProArt Price? But is it pro at Cooling? The ProArt LC420 AiO Ultimate Review

Рет қаралды 13,955

Күн бұрын

Пікірлер: 38

@arthurbaldry8443 9 ай бұрын

Considering the new Arctic freezer 3 is a third the price and can also be had with the stealthy look… yeah idk. Especially with its mediocre performance.

@jasonhenninger8220 9 ай бұрын

Amazon has the LFIII for just $90 for the 360 or $99 for the 420. Not even a consideration.

@lilunchengsmiles 9 ай бұрын

@@jasonhenninger8220but who cares those extra 1 degree cooler? Cooler Reliability for enterprise, since modern cpu is designed to handle throttle (check video interview with chief system architect from Puget System). and looks and build quality for gamers are more important for me. The new Arctic 3 looks nice by itself, but when it is inside the case, it just seems not fitting nicely from look perspective. Just my personal opinion.

@ovadyahbenyisrael2589 5 ай бұрын

Help! I just bought a ProArt PA602 case, a ProArt LC 420 AIO, and a ProArt Z790 motherboard, with an Intel 14900KF processor, and tried to put them together. Assembly went normally until I tried to install the waterblock/pump head onto the CPU. I used the hex-styled standoffs labeled for an LG1700, as per the instructions, and just lightly seated them onto the motherboard, not over-tightening. The standoff screws seem not long enough with the included Intel-style backing plate to give any thread to install the thumbscrew caps which fasten down the waterblock/pumphead. When settling the waterblock onto the CPU, the tip of each standoff screw just barely comes flush with the outside of the waterblock mounting bracket, leaving no thread to fasten them on at all. I've redone this from scratch twice now, rechecking everything I did, and cannot figure out what the problem is. What am I doing wrong?

@hrc3576 5 ай бұрын

Hey! Managed to buy almost identical setup as your, may I ask what are the thermal results you getting with this?

@johnplanzski9215 4 ай бұрын

I have a proart b760-creator motherboard proart pa602 case I was thinking of getting the cooler did you fix your problem also intel 14900k 😅

@johnplanzski9215 4 ай бұрын

@@hrc3576what is your set up ?

@hrc3576 4 ай бұрын

@@johnplanzski9215 Mine is z790+14900kf.

@ovadyahbenyisrael2589 4 ай бұрын

@@johnplanzski9215 Yep. Get some precision #6 screws and shorten them flush with the back of the CPU backing plate to clear the cooler backing plate.

@ObamaBenAladdin 9 ай бұрын

WHEN ARE THESE RELEASING IN THE US??

@outlet6989 9 ай бұрын

I like that temperature gauge. But it should have Green, Yellow, and flashing Red LCD lighting. It might have them when ASUS releases their ProArt Cooler II model. Too expensive? One needs to remember it's made by ASUS.

@rupturedduck1678 Ай бұрын

buy something else if you want rgb half the reason people like proart is bc it doesn’t have rgb

@maverikshooter 9 ай бұрын

Arctic Liquid Freezer III 420 vs ASUS ProArt LC420

@smileybax 7 ай бұрын

2nd this

@FormalPluto 9 ай бұрын

Xeon is pronounced 'ZEE-on', not 'ZEE-NEE-On'. Not that hard, Xeons have only been around for 26 years...

@JonnyBravo0311 9 ай бұрын

The comparison was done against 360mm coolers? And still the ProArt 420 scored that poorly? Combine that mediocre-at-best performance with the highest price out there... and this is a solid nope.

@AlfredStoppels 7 ай бұрын

Nice review but... i believe your Worth-formula is 'wrong', you look at price and cooling where this is build to do it all very quiet. You pay for being quiet. So in the formula you need to take in the loudness I think because that will give a different outcome and ... that is what this AIO is build for. .. well, thats what I think ;-)

@RobeytechLive 7 ай бұрын

The only issue with noise is that it is entirely dependent on all the other components in your build. It’s not an end all be all for formula but it does simplify the base of here is what it costs to do its primary job.

@marcusgoodlooking2482 7 ай бұрын

What is an alternative with this cooler for the Asus 602pe case .I mean which will be fitting without any revamp? It can be 360 AIO`s also

@Gumpa2 7 ай бұрын

How loud is it in comparison?

@labamba3011 8 ай бұрын

It's this sort of product that loses faith in the ProArt moniker. I start to then rethink there other components, like the Z790 creator... it reveals that ProArt doesn't give that much performance after all....

@BigChiefActual1 9 ай бұрын

Dracula's castle was allegedly cooled with water pipes. Technically that's aio right?

@napoficial7123 6 ай бұрын

It's like Pro Art line up needs to be redesign. It s not calling attention.

@LEK 3 ай бұрын

Its perfect lmao

@notlNSIGHT Ай бұрын

No. It's supposed to be low key.

@Yukeena 9 ай бұрын

This cooler is a huge letdown. For the price, I expected better idle and load temps.

@vicious12394 8 ай бұрын

I wanted to get this and the case for the aesthetic as i already have a pro art motherboard. But £300 for an aio is absolutely insane.

@MrPyroblastic 9 ай бұрын

My humble point … those Noctua fans rise the retail price high and they’re not as performative as other similar fans on the market. Not to mention they’re not quiet at all. Their design is at least 10 years old.