How to install a tire onto a rim ( without a tire machine)

[@phillipgrandison2384]

2 things . 1 buy and use tires spoons ($20 - $25).for set of 2 ea. And 2 cut open a couple used oil containers, milk gugs, or other type of plastic container. Use those cut plastic sheets to wedge between your spoon/rim while you work the tire onto rim. Doing this will protect the rim edge from being scratched while mounting the tire. Reposition the plastic sheets and spoons as need until the tires is completely on rim. This is how the mototcycle racers do it when at the race track, takes 5 min. Dont forget the balancing of them once done... cheers.

[@SpankTheGods]

Nice Rim job bro!

[@ProblemSolverGarage]

Lol thx

[@KlayThompsonFitnessOfficial]

Pause

[@KlayThompsonFitnessOfficial]

Pause

[@jimiandersonblackknight7554]

If you have a hard time getting the bead to set, take a ratchet strap around the tread of the tire, not across the rim, literally only on the tread all the way around and tighten it up until the sidewalks blow out then add air

[@michaell1112]

Can we get a close up of the lip so we can see how much damage was done during this process?

[@ypark6421]

wow, I have never thought that it's possible without machine. Amazing!

[@MACrosby]

Thanks for the video, this is going to save me a ton of money!

[@unityforall-md4fl]

Thanks for showing the part where to place the tire in position to the rim to be able mount the tire

[@js-wq6zy]

Tires are way too narrow for the rim

[@Omgkhii]

Thats the style brother. Stretched on skinnies is the only way

[@RAKDEMON]

​@@Omgkhiiman that scared me not gonna lie I just put a tire on my crown Vic rim and noticed how it was looking like the tire wasn't on right but ig im doing it right imma go air it up and test it I'll be back with a update 😂

[@kylewick2818]

All standard tire psi is between 30-35 psi you can drive on 40 but anything more than 35 WILL wear out the center of the tire faster and you'll have an uneven wear around 35psi your tires will wear evenly unless you drive a small car then 30 psi will be perfect! Do not ride on 45 psi with a small car otherwise you'll have a rough ride and pre mature worn tires but do what you want it's your own tires wearing lol just standard practice automotive certified info is all 🤷‍♂️😎🤙💯🔥

[@flybye]

Width of tire too small for rim looks,silly

[@401Impala]

On todays episode of how to f**k up the lip of your wheel!

[@wanalifyusof]

how so ?

[@noseboop4354]

​@@wanalifyusofBy using those screwdrivers without applying the electrical tape at first. Stabbing a pointy metal tool against metal is a surefire way to gouge it, and long term damage it enough to create an unstable ride.

[@mrbard1]

@@noseboop4354 if you watched the whole vid, you would see he has put tape on the screw drivers in the last steps where the force of rim and tires are teh most high.

[@jonnsmith556]

​@@mrbard1I think that's what he was implying that he only did it at the end instead of starting with them taped

[@thomasv2207]

I'm surprised you ignored the red marking on tire.

[@mikimiki195]

Most shops do the same

[@GarrettMetzskate]

I drive a lifted 4x4 diesel and I have never been able to get away with not balancing my tires. But on that note, good job though always nice to save a few dollars when you can.

[@hendryLW]

Don't you need to balance the tires?

[@javee-th5no]

Great VIDEO MY GEE, NICE AND SIMPLE! WHEN I DO MINES IM GONA DUCT TAPE THE SCREW DRIVERS AS TO NOT DAMAGE RIM..

[@jaytravel-12]

what about balance and rotation.

[@LadyVSC13]

This is what i was thinking but i wonder if it would be cheaper to get that done vs the cost of having a shop put new tires on all 4 rims

[@Mitalayeka]

Thanks for sharing the knowledge.

[@ProblemSolverGarage]

You bet!

[@billsomerset238]

Your taking a big chance on damaging that rim.

[@rockfordhx2768]

His rim his cares not for your input

[@billsomerset238]

@@rockfordhx2768 thanks for your uneducated commet.

[@braydenwebb4307]

How? Cause rubber damages rims😂😂

[@billsomerset238]

I dont know why I'm answering this, but spend 65 years in the automotive repair business then you'll see how.

[@karldanger44199]

​@@billsomerset238 how does a tire machine put any less leverage on the rim?

[@DougBe38]

What about 30 and 35 series?

[@davidparker3346]

You are soaping the wrong side of the tire bead when installing the front of the tire on the front of the wheel. Put the soapy water on the under side of the bead that's where its contacting the rim and it will slip on much easier.

[@chhansen9813]

Its so easy to destroy the bead on the tire that way! I have done a ton of tires like this, but with tire irons that come with cars in the trunk with the spare tire. I have ruined a few good tires too!

[@panman1224]

FANTASTIC! Great video. Thank you

[@wisesa09]

You don't want to place any lubricant on the side of the tire where the wheel is facing. You need that dry seal.

[@TNGG_Lucky]

I'm just going to pay the $25 per rim 😂😂😂😂

[@lanestevens2755]

It must be nice to be a rich white republican Trump supporter to be able to afford that luxury. You people don’t even pay your fair share

[@robertsanchez5652]

Was gonna say the exact same thing gang

[@bigcdadon30]

By me it's 20$ a rim and 60$ a tire I'll save myself the trouble 😂😂

[@evilphantom457]

Harbor freight sells a tire balancer for $100. It actually works

[@cknick]

You should do it with the wheel face down. That way you only risk scratching the back of it!..

[@ProblemSolverGarage]

Unfortunately tires can only be mounted from the front.

[@benm4903]

Try doing tht with a 18" and up u want be able to do it

[@StayingBack71]

What are you talking about I mount 22 and 24 inch semi tires all the time with 2 bars. Take me 2 seconds

[@bulldogstrut1]

Just like changing a bicycle tire when I was a kid.

[@kenzie_drifts]

Does the flat heads not scratch the rim tho?

[@markrainford1219]

They did.

[@ajjohnson5447]

When i seen the car he was workin on? I instantly got a headache. Now im gonna be up all night. SOAB

[@lllWOLFYlllCBR]

Will those fit a 6x4.5 lug pattern?

[@ProblemSolverGarage]

No

[@fabianpachoek7731]

Where is wheel balance

[@34979Charlie]

He reckons it´s over rated.. 😆

[@fabianpachoek7731]

All right

[@Juice83]

$5-10/ wheel at any auto shop or get balancing beads you put inside of the tire... Not entirely sure how they work, but apparently they work really well if the correct amount is added. They're like little BB's you put inside of the tire when mounting.

[@LadyVSC13]

​@34979Charlie at about 8:20 he says balancing is "in his opinion a bit over rated" lol

[@dealzz4366]

“Doing this in real time!” Proceeds to speed up and make cuts in the video

[@ProblemSolverGarage]

It was pretty much real time, just didn't wanna make the video extremely boring .

[@MILLIONDOLLAPD]

What about yhe valve stem tho

[@ProblemSolverGarage]

I have a separate valve stem video

[@antonnovak533]

Da bi vsaj vzel kakšen širok material naprimer montirač in ne izvijač.Tako je prevelika sia na površino in se platišče poškoduje.Amatersko delo.

[@kevinnielson3090]

So if I do these one at a time same tire same side do I want to balance them

[@imranhashmi9259]

I’m watching this because the tire shop said they don’t have a big enough machine but I remember watching people install them manually when I was a kid Poor rim tho

[@noseboop4354]

Put the electrical tape on the screwdrivers before you start to save your rim.

[@pstreetgarage7304]

Nice job !

[@ProblemSolverGarage]

Thx

[@kalleklp7291]

What a rim job.

[@JackBlack-ii1ip]

Washing up soap in a spray bottle would be a plus. I use tallow but you have to pay a bit more.

[@Franklin-w3c]

it's easier to start with the inside because the rim is more rounded...

[@smartauto1166]

The tire shops just do the same thing they put raw iron bar on the lip just like this so just do it yourself

[@edouardtouchette388]

Awesome! Now show me how to remove it 😂

[@ProblemSolverGarage]

I guess I will eventually

[@Oneklickmedia]

Tie down strap and 3ton Jack. Just watch the video

[@Johnlatine]

Really should us a tire bar.. this sucks no matter how you do it without a machine

[@GoBart454]

A cheap set of 16 inch tire irons would work way better than screw drivers

[@LadyVSC13]

I can only find 24inch is that ok?

[@GoBart454]

@@LadyVSC13 thats even better. More leverage 👍

[@LadyVSC13]

@@GoBart454 sweet ty soooooo much for the info!!!

[@johnhipp8267]

Now try it on a real tire instead of that O-ring you call a tire.

[@CalebsCars]

Easier with bigger sidewall actually

[@Codi666]

Bravo

[@diemman70]

Why am I wincing? You’re not doing my motorcycle wheels without protecting the rim.

[@devineleven514]

Two long ass pry bars would work better if you don't give a shit. Just start at one point and work it around on the last step and walk em

[@devineleven514]

it HAD to be a VW guy fucking christ makes sense lmfao

[@PRpowerBOV414]

Thanks KZbin

[@bimatube1274]

Not every tire will work this way.

[@MOHCTEP_KILL]

Лучше я отдам 10$ за шиномонтаж чем накоцаю диск. Так за эти 10$ еще и отбалансируют колеса.

[@vladimirdyuzhev]

Это у вас там 10 баксов. 😢 А тут 25 за колесо без балансировки. 150 и выше за 4 со всеми работами.

[@vladimirdyuzhev]

А, еще и записываться надо, и ждать два-три часа вместо получаса, потому что сезон, очереди, и только первого клиента начинают делать вовремя.

[@shenolhassan3284]

Damage done

[@شيشانيى]

Bye bye rim

[@davidfarmer5565]

Imagine a thin wall tire

[@Fichtenelch85]

This is ridiculous.

[@ProblemSolverGarage]

Only one percent of people in the world make over $30,000 a year, that's why this video is doing so good, it's for the 99% of us broke people. Thanks for watching and thanks for the feedback ;)

[@louf8335]

U can't balance the tire. Lol

[@jessicawinslet684]

This guy remind me ray from riding in cars with boys lol 😆 😂

[@O4L.]

I’ll just paid that money and take it to the shop and have professionals do it

[@ProblemSolverGarage]

Only 1% of people in the world have money, that's why the videos doing so good. Obviously if you can afford it and take it to the shop

[@Odessa45]

lol no

[@kentsang6330]

For sure he damage the edges with the screw driver 😅he took the chance to do this video , didn’t know it would be this hard 😂. Dent with regrets , should of bring it to the auto mechanics😂

[@samfreelance1422]

What about balancing it😂