Pullup Bar in Only 5 Minutes - Easiest In Home Hack

[@ricardo.pedraza]

Will 5-minute pull-up bar last longer than 5 minutes?

[@____-gy5mq]

It can, but you gotta focus.

[@mikisafe2905]

hahahahahaah good one the first hole is horrible

[@LOVEJOTYT]

May be!

[@justspray8265]

@@LOVEJOTYT bro what😂

[@Music-gw4qf]

Bro, I cannot even last 5 minutes.

[@juruna00]

"wife comes in" what's going on, what's happening!!! lucas: "nothing baby don't come down" lol

[@bluejayjitsu4429]

I'm glad I'm not the only one who rushes into stuff like this. Results vary.

[@louisrousselle5681]

*currently destroying the ceiling* Don't worry it's not part of the house babe 😂

[@matthewharrisparker]

Was thinking about you today when I had a moment where “YA GOTTA FOCUS” and then looked up how to make a pull-up bar and found this. Love it. Never stop saying the gotta focus catch phrase it’s the best

[@JIREN972]

Actually this is the real 5-minutes craft

[@RyGuyy11]

Instructions weren't clear, my house collapsed.

[@yonisilverstone6605]

@lord raghuvansi he's joking, my guy

[@fenrirwolf456]

My wife left..

[@hasanabbadi3252]

@@fenrirwolf456 cool

[@vaishnavborade6684]

@@yonisilverstone6605 He is also joking...

[@yonisilverstone6605]

@@vaishnavborade6684 oh fine my bad

[@anthonyanderson7315]

I mean I like it but you shouldn't have vertical stress that close to the end grain.

[@KevinGonzalez-en8fd]

Stop worrying about the dudes wood and start worrying about getting some bitches

[@CazzEdits]

@@KevinGonzalez-en8fd this is amazing

[@greenlog7023]

Couple hundred pounds every now and then won’t do anything it’s not consistent enough

[@ab-bc2gr]

@@CazzEdits no its not

[@homelessrobot]

I have a 7.5-8ft ceiling in my room and there is one of those little attic access hatches. No ladder, just a square of drywall and trim around it to keep it from falling down. If I push the hatch up i have direct access to the cross members that support the ceiling and holding the walls together. The cross members are at the perfect height for a pullup. Most people probably have one in their closet or bathroom or something.

[@juruna00]

i don't think it can handle more then 90kg, is also good to keep your weight in check lol

[@victorstrokov8181]

4 2×4 blocks instead of 2 2×4s could support double the weight

[@reuniteireland]

@@victorstrokov8181 yes and drilling the hole further up. Putting it like 3/4 of a inch from the bottom it is likely to break through if you stress it. That's okay though he just made it quickly with what is on hand.

[@fastwalker128]

Use two bicycle hooks and screw them into the bottom of the joists. Hang the rod on the hooks. Even faster and less work.

[@davidpierce9949]

Great idea!

[@TaylorYarick]

Not as strong

[@tgbluesky]

Using that method for years. Except the bar rotates. 😎

[@MarcusD4444]

Cool video. Keep the "home workout builds" coming. Also, the ones where you try different fast food. Always enjoyable

[@simon.scurtu]

lol i like the change from a Parkour/Flips/health channel into a DIY channel 😂😂

[@AmgK.]

Hahahaha I agree .... But the humour is still alive though😝🤟🏼

[@caefunk]

Pigmie: "When you can't get something to work, you just gotta get it to work" Me: My God! Why didn't I think of that!?

[@phernmok364]

Just buy a house if you're homeless :)

[@jonnyb2532]

Great attitude! The hole may be a tad too close to the end of the 2 by 4, lol!

[@integralsun]

I like this because no pipe flange is needed. And a tight, snug hole is best for your pipe.

[@Chollanger148-pv8jp]

Hey man the hole is a bit close to the end of the wood. Might be worth putting a little metal strap round the bottom of those uprights so that the end grain doesn't break out.

[@michopoulosal]

Thanks mate!! I was looking for many months how to fix, and you gave me the solution!

[@MrBeats-c4n]

How was it holding up?

[@funwithcalisthenics]

That’s great. When can you come over and install mine?

[@supitsaaron1]

I needed this 2 days ago 😂

[@gwengwen4535]

Perfect. Just sent this to my husband🙌🏼

[@akashbinning6194]

He focused away everything that blocked him from his goal 💥

[@Man1anlol]

Make sure to level it horizontally to avoid ruining your back.

[@muhammadirtiqa6309]

Wholesome

[@kevinpeat3721]

Quality craftsmanship there.

[@mrbodo8233]

BUT YOU GOTTA FOCUS!

[@gdonson4440]

You could have been president 2.11m subs with vids like this, a great snake oils salesman

[@cwguy8960]

Dude - that's a real hack job. Still - love it! Time for pullups!!

[@sshapiro5843]

Nice., simple and cheap.. I will just add a 2x4x6" additional wood blocks to where the bar goes through.

[@jennengmoua9267]

Great video, but I got one problem I found a bar and some wood and have the tools, but where do I get a house?

[@KenGullette]

This was a very cool video. You are great on-camera. Funny and informative!! Good job.

[@abdulcader888]

Nice job. You could have put the hole a bit higher by an inch to ensure safety...

[@thebicycleman8062]

was lookin for somebody to say this!

[@zandtheboys5160]

Lucas officially lost it. Lol love you brotha. Stay safe and sane

[@reverse8840]

"The Johnny B technic"😂😂😂

[@kiyoponnn]

*technique for god's sake learn how to spell

[@nunpuiachawngthu6421]

Very impressive but can you play Wonderwall?

[@christopherjohnson5961]

"wut? a magick saw?" haha

[@MinhAnh-yt7cg]

You are really funny , in a minded way , not just like others funny KZbinrs but in a bullshit way . You deserve a better viewer numbers :))))

[@waronamogobye436]

Just finished🔥 please upload a vid on how to make a chin up bar in 5mins

[@smrtzttspanishenglishtutor67]

This guy is really funny!

[@swordacademyUK]

Keep putting out the vids, they are great! Inspires me to to try and do the same for our sword fighting academy! Thanks again

[@niepuchale5556]

I'm gonna make this.

[@satyanandjha6092]

Easy way to make pull up bar...nice video

[@hlegler]

Impressive "Gunsmoke" reference.

[@Damascus5350]

Next video? How to fix broken knee caps!

[@hopetonbell3623]

Awesome!!! I am looking for a chin up bar and I might just try your style. 👍🏽

[@gratefulpianist8640]

How to make a pull up bar in 5 min? back flip in5 min, back handspring, flare... Me: nop

[@americanman6347]

Dude I'm glad I just found your channel you're funny af

[@aniketkalane1628]

Which pipe should be used ?& Measurements ?

[@rohitsanjay5787]

Cool.

[@priscilamiranda3]

fANTASTIC!! I will try to do it hahhaha

[@TinyPendle]

Should use timber locks bud. Drywalls don’t have much tensile strength

[@Doobency]

Thanks man... From a scrawny high schooler

[@eruston]

McGeyvor would be proud: step one: HAVE A HOUSE WITH EXPOSED JOISTS IN THE CEILING

[@hasan13032]

No excuses to workout!

[@bednar1991]

"in a very feminine way-how do we fix that MR Lucas?" LoL, made may day

[@romanschroder7836]

Only 4 screws are carrying his entire weight?! Did I get it right?

[@jhomrich89]

Would definitely change that curtain rod to a steel pipe that's stronger, and would also have put the holes a little higher that looks like over time it will fail

[@wildabeatz5308]

lmao why is this guy so funny when he dont even try to be

[@chaosknight2914]

Facts

[@evil069]

Now make the dip station

[@nubbsgalore9016]

i took two ladders and taped a rake and a broom together for the bar.

[@adam28283]

L love your vids Pigmie bro you made me learn all of my flip thanks so much

[@dirtbikerestoration9191]

"When you cant get something to work, just get it to work" -Pigmie

[@andrewr8800]

Thank you for this..... I love you

[@franciscochavez5332]

Hack build dip bars

[@CMHDtheHD]

Yes...please hack more builds

[@Borschtt]

Jesus Christ Loves You All So So Much!

[@t.g7945]

I love his carchter

[@jacquelinenshimirmana7274]

You should do more of the keven

[@mightymonke2527]

More house hacks Lucas!

[@slimchancejw]

What man doesn’t own atleast one power saw? Atleast he has a power screwer 😂

[@maddiesartbin9372]

He looks like a combination of Zac Efron and Liam Hemsworth...😍

[@akashsaini0806]

Incredible man 💪

[@A1Aquatics204]

Smart

[@urjnlegend]

Don't drill your holes as low as he did, drill them about an inch or two higher, so it doesn't break too fast

[@urjnlegend]

Also use two stacked, so it's super strong

[@electricprince9829]

But does it still work?

[@ngtutorials2780]

Insane vid bro keep it up

[@danielhowe1886]

Ah mate ur doin all the right videos right now :)

[@ivanluca734]

Holy shit hahahaha it actually worked 🤣🤣 dude, u're amazing 🤣

[@JoeyBolducMovement]

This is a great idea for a video. I’m always trying to figure out ways to get my clients to hang, do you mind if I spread the love?

[@maigematthews5620]

Hey Lucas, I have brain teaser for you.... How do you perform t bar pull-ups with an at home pull-up bar? With and without the actual t bar. I want to isolate those wing-lats by locking up my arms in a 90 degree angle for the entire pull-up rotation.

[@antman2826]

I think the word "hack" is most appropriate here.

[@carlito3094]

Dude that’s awesome lol

[@trev8578]

Who else Is here because they half nothing better to do during quarantine

[@tootory9506]

Gawd Howm HAaaaKK - Da Bearrss

[@ashley32111]

this guy looks so familiar omg

[@badmanno.1650]

That's a dangerous pull up bar...

[@cooperevans8033]

home dip bars please!

[@michaelwright2964]

he’s got nearly 2 million subscribers but only has like 18,000 views ???

[@sixwax6961]

Now my dads wondering where the shovel went help

[@burrmanchu687]

dude you're fucking hilarious lmao

[@georgeparzival3817]

Awesome,,,I wanna make it too 😁

[@chaosknight2914]

Love ur vids

[@reverse8840]

does he heart comments?

[@riddlescom]

I have a pullup bar . I just cant pull myself up .

[@charlescarabott7692]

Yes pullups aren't easy.

[@julian6490]

bet you saw that wood in 10mins. HAHAHA

[@video-kp8ym]

Wow

[@jason3114]

Me as a kid making stuff in a nutshell

[@dailykaizen8313]

i don't have exposed beams in my garage.... any suggestions?

[@charlescarabott7692]

Im thinking building a wall bracket or fit a bar in a doorway since my ceiling is way too high

[@0zero31]

Says hes gona make a pullup bar in 5 minutes. Video is almost 6 minutes long.

[@cameraduong9886]

Dude that bar size gonna fk up your grib

[@integralsun]

Go for 1.25” diameter.