(QUALITY) How to avoid BUBBLES without a pressure pot. | DIY Resin Casting

I share almost every trick I know for eliminating bubbles in resin casts.
I make videos every week, thanks to direct support. If you would like to help Steady Craftin keep on going (and receive some extras too), please consider supporting:
TIP JAR
paypal.me/steadycraftin
PATREON
/ steadycraftin
MERCH (Stickers and more!)
shop.crafnation.com/
0:00 Beautiful day introduction
2:16 JOOG your molds, tilt + tap
4:52 Mold VIBRATION
5:22 POWDER your molds
6:35 Resin PRE-SHAKE
7:16 Resin HIGH-POUR
7:55 SCREEN trick
8:37 FINGERTIP (and toothpic) technique
9:29 SHOP LOG (Stickers, Music, and Video Quality)
11:22 INJECT resin
12:00 "What's the best most durable resin I can use?"
12:36 Mold VENTS (Brass tube trick)
14:27 Quick bonus CUP MOLD TRICK
14:41 Closing words at night
15:11 End Credits + Blooper
FACEBOOK
/ thecrafsman
INSTAGRAM
@steadycraftin
GEAR I USE:
CAMERAS:
amzn.to/2YbUz5v
MICROPHONE:
www.adorama.com/RDVIDMICPP.html
LIGHTS:
amzn.to/2MnPMew
TRIPODS:
amzn.to/3iFlro7
AFFILIATE LINK NOTICE
“As an Amazon Associate I earn from qualifying purchases.”

[@TheCrafsMan]

Just about every time I make a video, I think "Mannn, I SHOULD have mentioned this also." One of those things is: OF COURSE you can use something like a massager or sander with sandpaper removed to vibrate bubbles out of the mold. When making the Free-Range Chicken, we used a dual-head back massager and it worked very well. It may be ideal to fill the mold PARTIALLY, hit it with the vibration while you tilt it at different angles to allow any trapped bubbles to escape, then fill it the rest of the way and hit it with vibration some more. Happy casting to you! Steady Craftin videos are made with the help of DIRECT SUPPORT: www.patreon.com/steadycraftin (You'll also get access to the printable 3D scans of my original sculpted figures, MP3s, exclusive behind-the-scenes videos, shop discounts, and more.) My family and I are so grateful that I get to do this.

[@flapjack6495]

do you think if i set the mold on a washing machine that would help?

[@TheCrafsMan]

@@flapjack6495 I imagine it would, in some way. But might not be the most efficient. Also remember you can rotate the mold mold around and tap-tap-tap the bottom and sides with your hand.

[@flapjack6495]

@@TheCrafsMan yeah true, I love the videos by the way super helpful and informative!

[@robt.v.8688]

CrafsMan, if you had your own Saturday morning cartoon what would it be like?

[@k.crobbins7603]

People talk about your crafs and your relaxation but your comedic timing is amazing too

[@morningvideo]

And hes so handsome.

[@davidz2016]

Bob Ross of crafts. Lol little letters here and a few bubbles lol .

[@wimwiddershins]

The CrafsMan is a multi-talented CrafsMan.

[@chriswillis4153]

Couldn’t agree more!

[@karinag9398]

Absolutely. Man of many talents, the CrafsMan

[@2degucitas]

I'm a simple old woman. I see Crafsman notification, I click, like , subscribe.

[@wombleofwimbledon5442]

He is one of KZbin's gifts :)

[@wombleofwimbledon5442]

Clickspring any?

[@robinbunn]

I was just thinking, "I wonder why I haven't seen any crafsman video on my feed lately, am I subscribed?" and I was subscribed, they just never appeared. So this makes me think it has something to do with the youtube algorythm. The quality of your videos is outstanding, and I say this with love. I have heard of youtubers changing their thumbnail design to appeal to the algorythm. I hope this helps Crafsman, we want to see you thrive!!

[@LG-vd8se]

I was one of those folks who emailed you regarding bubbles and you very kindly replied with a detailed and thoughtful email with tons of ideas. THANK YOU CRAFSMAN... you da best!

[@TheCrafsMan]

Glad to help, my friend! Thank you for taking time to encourage today!

[@peterdibble]

Don't let the algorithm discombogulate you, Crafsman. Your videos have quality ALL up in them. Coolnicity lookin'.

[@esalenchik]

“Crafsman, you’re so ridiculous”. - correction: Crafsman you’re perfectly ridiculous, or more correctly ridiculously perfect! Thank you for sharing your wonderful self with us.

[@likebutton963]

Get A Room

[@ZippedUpKitz]

Correction: Crafsman, you're perfectly ridiculous… ***you're*** 😊

[@jewabeus]

On the pre-shake I was expecting him to say, "shake it like a Polaroid picture." LOL

[@_TheMentor]

I'm sorry Crafsman, but your channel is the highest quality channel on KZbin. Every aspect is the perfect balance of well thought out creativity and random humor.

[@ConjuredCraft]

"Thats not really a stylistic thing" You had me fooled Crafsman 😀

[@linzertube]

CrafsMan, while you searched for cups at the end, your singing made me very happy, because I realized that YOU MUST BE HAPPY to be singing, while you fiddle around getting things done. That’s really nice.

[@spencerblack3253]

He's a musician 😲. This man must have buckets of talent in his workshop next to the resin or something

[@mf1ve]

"Crafsman, Crafsman, I get bubbles..." I giggled.

[@BobBob-qg4lo]

Hes just such a beacon of positivity, I love it so much

[@Ephunker89]

Your tone Your style Your teaching style Your musical talents Your crafts Your anecdotes Your videos on random things as well All of these are truly a blessing Crafsman. Thanks for taking the time in this short life to entertain and teach us. Can't wait for you to break a million subscribers. It's gonna happen my dude.

[@entlove1]

I don't use resin. But, I use chocolate these tips help me too using food safe things and either way I'm watching this video! 😊 Thank you! 🤗 Love your videos!!! 😎

[@igknightlord63]

Nice, you use a reuseable material so if it doesn't come out right the first time you can just melt and re-pour.

[@andy-in-indy]

Can you use powdered sugar or cocoa mix instead of baby powder? I have only done chocolates once and don't know what issues someone runs into.

[@entlove1]

@@igknightlord63 yup very true! Which on a time crunch gets annoying BUT definitely better than having to throw it out and start again. 🙌🏼

[@entlove1]

@@andy-in-indy similar to this when working with molds you get bubbles in the chocolate. The holes where bubbles were mess up the final result. Those are great ideas I do know people use powdered sugar, cocoa powder and corn starch at times.

[@igknightlord63]

@@andy-in-indy probably, just make sure what you use doesn't disolve into ot change the texture of the mold or materials

[@NewbombedTurk]

Crafsman, the quality in the video is you, and Crafsfamily. If people need music in the videos for them to be better, then they need to turn on their radio in the background.

[@seoultron4581]

Every video teaches me a shortcut to avoid errors in my craft. Thank you for these productions

[@Holktube]

Thank you for the bird sounds in the background. Its been snowy and silent where I live for about a month, and it did me well to hear.

[@annross]

You’re blowing my mind with the music! Oh yeah, got my T-shirt yesterday and I’m wearing it to do all my crafting in hopes of channeling your creativity.

[@2degucitas]

Where do I get a Crafsman t shirt?

[@esalenchik]

@@2degucitas look in the description box below the video, and you’ll find a link to Crafsman’s Etsy store.

[@likebutton963]

You Have Jungle Fever

[@user-nd9vw5gj8p]

You’re like the bob ross of this I swear haha. Your voice just keeps me calm and I enjoy the content so much!!!!

[@Brohoyoslo]

We dont mind the heater. Take care of yourself. As long as you're comfortable, we're comfortable. 😌

[@craftycrumbs8425]

Heat guns are also great too! But they tend to cure the top layer faster than the rest. So best when pouring in layers; pour, heat gun, then repeat.

[@knightterrain6936]

@craftycrumbs - I was going to mention that many terrain crafters use this heat and layer technique to remove bubbles in their, clear-resin, streams, rivers, and bodies-of-water. Great to see this comment!

[@TheCrafsMan]

Snap! Good one! I've only ever done this with clear epoxy (and it worked NICELY). Thanks for adding!

[@NumberOneDragon]

I swear some streaming service needs to pickup TheCrafsMan Show. Kudos! Always informative, funny and relaxing.

[@ACryin_Shame]

Was just chillin in bed, YTin some cement crafts, just asked for some for my Bday. Hubby was tryin to sleep. 5 seconds into finding you, i started laughin. He started laughin.... You kept us up all night! Lol YOU ARE HILARIOUS! 😂😂😂😂

[@Jagent]

It's a shame that your views aren't higher. Your channel is always quality content. Stay warm!

[@AnSkeleton723]

you’s a fountain of endless knowledge crafsman

[@__Xeese]

They always ask “How to remove the bubbles” But never “How are the bubbles”

[@fredygump5578]

My bubbles are excellent. Thanks for asking!

[@__Xeese]

@@fredygump5578 Glad to hear!

[@alexandersweetboyo4242]

I don't even work with resin but my anxiety has been really bad and his voice is so calming and his humor is amazing, this is lovely I love him

[@mike_b_us]

Once, Crafsman taught us that we need to negotiate with the bubbles. Now, he taught us seven different techniques for conducting the negotiation!

[@TheCrafsMan]

:) Thanks for hanging with me all this time, Mike!

[@soundwaveprime780]

Craftsman's voice is the definition of chill!

[@Rcking1110]

The views aren't your fault, it's our fault. We have to like and comment. Get the algorithm going

[@beckaliz]

Another great video, all those folks not watching don’t know what they’re missing

[@jbaby362]

Oh I LOVE the chapters, can pull out the technique I want to review, thank you so much Crafsman!

[@TheCrafsMan]

Glad you like that! Thank you for letting me know. :D It was something I had no idea about until a few videos back. I know how much I would enjoy that on other videos, so I like to add it to my ones. :D

[@carlycharlesworth1497]

Crafsman, I don't use resin yet but I have to tell you, I find your videos so interesting and the wonderful gentle way you speak just makes me feel relaxed and happy in your company, that I watched this video anyway. You are an interesting man with a gorgeous voice and when you say, 'come on now,' I find myself smiling happily. God bless you Crafsman. You are one of a kind!

[@TannerCh]

Every day is a great day when you're steady craftin'

[@UncleJessy]

Attempting my first molds soon! Can’t wait.

[@TheCrafsMan]

Awwww YEAH, Uncle Jessy! :D I'm excited for you, sir! Holler at me if I can be of assistance. But I don't think you'll have any problems. Mold-making ain't no hill for a stepper like Uncle Jessy! ;)

[@itsagundam79]

It's addictive!

[@kriscontinuum3267]

Me too! I'm attempting a silicone cast next weekend, so I've been cramming all CrafsMan's casting videos. I'll be using all the tricks in this video.

[@Rocknoob49]

No idea how you can ramble on about breaking the speed limit without breaking into furious giggling. Thanks for the vibes and the inspiration Crafsman

[@gunkrs]

The opening of this video was so cute and now i have KNOWLEDGE. i am forever grateful for crafsman

[@gendoikari6062]

I saw your astronaut chicken sculpt video and I felt so relaxed and inspired about my craft. Sincerely I thought that you should get an academy award for your videos, your work and your tutorials! Best wishes...

[@thekaratekid02]

The timing of this upload is crazy, I just started working with resins and have been trying to figure this out.

[@deborahdanhauer8525]

My word! He can play too! Is there anything you can't do? We love you too!😊❤

[@manolkalinov2195]

See, I didn't even pause the video, so that CrafsMan can go and warm up right quicker. That's called Respecting the Crafs...Man.

[@lissjester5890]

I only found this channel recently but it's by far my new favourite on KZbin 😌 thanks for the bubble advise craftsman! My future resin dice projects thank you 😊

[@TheCrafsMan]

Thank you so much for watching! I hope you continue to enjoy the videos, and wish you success with the dice projects! :D

[@lissjester5890]

@@TheCrafsMan thanks crafsman! :D

[@dammitspawk]

crafsman ur videos are always (QUALITY)

[@RichardM-kv4uu]

This guy is a genius, give him his own TV station!

[@GinaBeana_Tootsie]

Tv show would be great 👍🏼

[@valkasolidor6727]

I would love it if Weird Al made UHF 2 featuring CrafsMan.

[@flanagancreations1673]

I wouldn't miss a episode

[@lawrencevaughn9149]

Honestly I prefer him on KZbin Just because he has more creative freedom and is in Dogtown by corporate mandates which I feel would just break his spirit

[@GinaBeana_Tootsie]

@@lawrencevaughn9149 that is a great reason for not going on Tv thanks your so right we don’t want to change him we just luv him for who he is ❤️

[@heatherberg7499]

Crafsman is the only person on earth who will be kind to plastic letters.

[@o0Ace]

How am I just discovering you? Your channel is absolute gold!

[@kenkrugger]

Sunday mornin Crafsman. Best thing since Saturday morning cartoons

[@discosludge]

Crafsman is consistently the best part of my Sunday.

[@primezilla37]

Can you make a video talking about the cheapest resin and silicone for molding and casting

[@JasonP6339]

This is a great idea! Like this people!! So Crafsman will see

[@TheCrafsMan]

That's a good idea, actually. I've found these particular materials to be just expensive across the board, due to the elements required to make them. I can say tin-cure silicone is generally cheaper than platinum-cure silicone, but there's a strength disadvantage, too. And that would be the deal with resin... because the cheaper stuff tends to be more brittle. So I guess we'd have to factor in what we're using them for. We could also talk about ways to get the most mileage out of your materials, like recycling silicone chunks, and using backfill materials with slush casting. I've made a note to make a video about this! Look for it to be covered sometime down the road. ;)

[@Philographicks]

Looking for your video you mentioned on different casting resins.

[@JasonP6339]

@@TheCrafsMan I think a big step in getting you even more comfortable and less stressed about the release of a weekly video is when we get you to understand that, while every single one of us absolutely love the crafts, a lot of times we are just here to hear your voice, watch you make crafs, and hear you're incredibly well timed comedic jokes... Sometimes I'm not even sure you realize just how funny some of your natural quirks are... it's one of the most endearing parts about the many endearing things about you. To most of us you are like everything all in one package. ASMR, unintentional ASMR, crafts, old stories, cool info about the process of making these types of videos and how it grows over time with your channel, collectors, makers..... I'm serious when I say that I can go on like that all day, but I'll spare you lol So anytime you feel like you're making the same video twice or anytime you feel like your videos need more, please stop and remember this -- it doesn't and they don't. Most of us are here because of you. There are tens of thousands of crafting videos on KZbin, many great channels, but they all lack one huge detail - they aren't Crafsman. Most of us wouldn't care if you simply made a video taping your weekly adventures in crafting and simply talking over it like you normally do the whole time - sometimes about the actual craft you're doing and sometimes about non-craft stuff. Quite literally put that video on every single week and your core audience would have never been happier or more pleased. So if you're ever fighting with yourself about always needing to "one-up" yourself at certain points in time..... please don't do that, because it is never ever necessary. You one-up yourself all the time just by growing and learning and letting us take a peek at your personal progress on your journey to fulfill lifelong dreams! Never ever doubt yourself or the fact that your style simply works.

[@JasonP6339]

@@Philographicks it was quite a while ago. Maybe 1 - 1.5ish years ago

[@bethaniepetitpas5699]

This is hands down the best makin stuff channel.

[@Animanimate]

This is EXACTLY the video I needed. Thank you, Crafsman!

[@Redmeadow]

CrafsMan reading minds right thur

[@Dukefazon]

10:57 - that quickly turned into Gary Numan :D

[@hilanddoug]

Shop Log segment was pretty cool with your theme song! Crafsman is a musician, too!

[@jeremygreen2883]

Crafsman, I literally watch your videos multiple times, so I am definitely doing my part to bring your view count up! Haha

[@1nonstopsherri]

Love ya CrafsMan. Ya know I watch your videos because you are a beautiful human being. Haven't done much craftin the past couple years but just enjoy your entire presentation. Keep up your excellent self!

[@Tye323]

The brass tube thru the mold is a game changer! 🙌 No more glue globs! 😎 Thank you!!

[@hullinstruments]

I was trying to get to sleep an hour ago and I always look up your videos and put it on the playlist so they automatically play through. Sometimes that’s the only thing that can get me to sleep after a really crappy day. Or crappy year. So extremely stoked to see a new video posted! I hope you’re doing well!

[@Mickelous]

The quality of this is outstanding. Your evolution is impressive.

[@karenmorris5847]

We can always count on you Craftsman to tell it to us straight up, thank you from Helena Montana ♥️

[@dansanchez9838]

Someone give this man his own show between Bob Ross and Mr. Rogers

[@theothertonydutch]

He has his own show and you just watched it.

[@dansanchez9838]

@@theothertonydutch on TV, sir. That was implied with Bob Ross and Rogers.

[@theothertonydutch]

@@dansanchez9838 Do you really want TV executives to get their hands on this?

[@dansanchez9838]

@@theothertonydutch these shows usually run on public access channels and non profit funded by people like you

[@theothertonydutch]

@@dansanchez9838 Lol.

[@gemzki002]

thanks crafsman, I learn a lot today, you are one of my inspiration, thanks why I'm making toys

[@TheCrafsMan]

Gemar, this does my heart so much good. Thank you, for real. Wishing you the best with toy-making!

[@Chill1332]

Super useful!!! That's ALWAYS my problem. I have such a small craft area a pressure pot would take up half of it.......and I'm kind of scared of them. LOL. But I keep getting bubbles in my molds and it drives me batty. This was such a great video with so many different solutions!

[@vampireteddygram720]

Thanks for this Crafsman!

[@deepjoes1072]

Crafsman! Another great tool to prevent any kind of bubbles in your casts is a silicon brush you normaly use for cooking and baking. veery cheap and even if there is still some resin on the brush you can easily remove it since it is silicon :D Try it :)

[@eeleroet434]

with the amount of interaction your channel gets it's gonna be growing even faster in no time.

[@BlackPantherChristie]

We love you too Craffsman!

[@one_b]

Crafsman you've gotta remind people to like, sub, and SHARE your brilliant content. Also, most of the other channels I follow from retro computing, pixel art, electronics, to that awful four letter word... NEWS have paid promotions. I see nothing wrong with enhancing the income stream promoting products you actually use and value.

[@ucitymetalhead]

Yeah no it's really nice to have at least a few youtubers that don't do commercials.

[@infctdppt]

I don't think he's gotta do anything honestly...

[@jackpijjin4088]

If youtube would just run pre-roll ads or stick them at the end, it would be fine. They're too aggressive with their ads though and just stick them wherever, usually loudly at that. It would drive the people who find Crafsman relaxing away and people who try to learn will be frustrated by the interruptions- especially those who appreciate Crafsman's slower delivery due to learning disorders or various kinds. Not trying to rant, though. I hope I didn't come across that way; I'm just joining the discussion.

[@one_b]

@@jackpijjin4088 I block all ads and not ashamed to say it and instead try to support content creators directly by buying their stuff or donating. KZbin's ads that get inserted are too aggressive - I 100% agree. I am talking about giving sponsored shout-outs that are part of the video and can't be edited out by the likes of "people like me" that block ads. To the other comments: Would Crafsman saying in a Crafsman sort of way that a video was sponsored by a specific product vendor once in a video really stop you from watching? It certainly doesn't stop me on a dozen other channels that update regularly and produce worthwhile content.

[@jackpijjin4088]

@@one_b yeah same, when not on mobile. (Because I'm not about to give Googtube a single red cent to solve a 'problem' they created.) Your option for Crafsman is exactly what I would say to do, but hopefully he would get contacted by/ sponsored by someone who deals in creative things like tools or things that he shows in the actual videos he makes. (Like the resin! That would be great.) He's not desperate enough for Raid or... eugh, Manscaped...

[@JEM3]

We Love Crafsman ❤️

[@susanwinter2896]

Crafsman, you have a steady day now. I love you.

[@colefamilywho]

Any day is made more beautiful by a Crafsman video.

[@andy_warb]

Ordered my stickers! Thanks Crafsman!

[@TheCrafsMan]

Thank you for your support, so much!

[@HollywoodColt]

Crafsman all your videos are (QUALITY)!!!!!!

[@morpheox]

The breaking the speed limit bit had me chuckling :D

[@Rodimus13ShelfSpace]

My wife just got started with resin casting and has been having a little bit of trouble with bubbles. I'm gonna make sure to pass this on to her.

[@ericberg922]

the sound of the train is so calming

[@cherrygoblin6697]

I was literally thinking last night "How can I avoid bubbles when I cast my miniatures?" and I was thinking about different ways but pow, you put out this video today!

[@Redmeadow]

Great video CrafsMan, you always lift me up brother.

[@TheRagingRodentGaming]

i just wanna say i used to only do pen and paper sort of arts, and a bit of sculpting and minis, but after the wonderful experience this channel (and others that came into my recommended after :) ) has brought me, i've started to study making all sorts of knick knacks and pattywacks, so thank you, crafsman.

[@ulaB]

When using the syringe, you can create a vacuum by blocking the nozzle and pulling the plunger. This will force bubbles out of the silicone too.

[@no-reply287]

The editing is ridiculously good, wow

[@machineman6498]

Craftsman genuinely sounds cold. Wishing you the best right now with the weather.

[@WallHaxxx]

All of your videos are quality, Crafsman. I watch every single one.

[@debhalld9794]

Amen to that!!!

[@rustytherobotbear]

Brilliant, as usual - and anything that involves robots gets an automatic thumbs up from me! :) Here's another tip for reducing boobles - and helping your casting material flow into tiny nooks and crevices: heat your mold first! Use a hairdryer or hot air gun (set on low, or held a long way back!) or, even better, leave your mold to soak in hot water for ten minutes. Let it dry off (and it'll dry quite quickly cos it's already warm) and then pour your goo into it: the heat will reduce the viscosity of the goo and make it easier for the boobles to rise to the surface. It works particularly well if you're casting in a material that hardens when it cools - like chocolate or sugary candy stuff. The warm mold keeps it warm for longer and lets it flow into every little detail.

[@figrollin]

In Scotland, what you call "jooging" we call "shoogling". Try adding that L in there - it feels right.

[@gregjackson6529]

Bingo! Your videos are what I've been looking for - several ways to do molding with inexpensive products & a variety of projects - and with a casual easygoing host.

[@b1nary_f1nary]

Hey Crafsman. That distant train sound in the background at around 2:46 is lovely

[@IQzminus2]

This channel is just filled with so much love, nice feels and curiosity to find new knowledge to share

[@JacksonCarson]

The qualité you are injecting is coming through loud and clear. 🙌

[@chuppoacobra]

The knowledge and information that you bring forth is amazing.....truly! But you lighting, your lighting skills......I am a believer in the moods that you create. So, so good. Warmth. We have seen vids where you have discussed the lights and filters that you use that help in creating the atmosphere that you wish to share, but still.....beyond comparison! From the smallest, general thing, right down to a focused topic/feature, it's the attention to every detail.

[@fallentreewoodcrafts]

First time watching one of your videos. I have to say that you are kind of a "Fred Rogers" of crafting. Very Cool!

[@ray24051]

A lot of people spray mold release thinking that that will help make the bubbles Escape but it doesn't talcum powder or baby powder helps release bubbles trapped in tight areas or crevices. The only downfall about using the baby powder your molds will dry out quicker from the baby powder. So after so many pulls of a particular mold I will spray them down with mold release so that way the mold can get lubricated and I could get more extended life out of the mold. I notice you use Specialty Resin resins I have been using them for years that's what I cast my models with.

[@teshakkaldro7301]

Crafsman you are always a treasure~ i just wanted to make sure you knew

[@TheCrafsMan]

So very kind of you! Thank you!

[@honkhonk165]

This is such a quality channel, my goodness.

[@toridomiart7092]

I've been a fan for years now and I'm still so filled with joy getting to listen and watch every new video. Funny, sweet, so informative, knowledgeable and motivating!!! I grew up watching Bob Ross (like many of your viewers judging by your comments 🤣) and I loved him, and your videos manage to make me feel just as good if not better. You make the world feel so big and full. Keep on crafting 🥰🥰🥰🥰!!

[@otheblade]

I love how informative it is.

[@joedehler7029]

It’s great to hear the theme song coming along again, I like it!

[@SweBerra]

Your clips always make me happy when i feel down. Keep up the awesome work u do CrafsMan!

[@bartonstano9327]

Hope you an yours are ok. It has been cold here in the south.