Quick & Easy Cheap S15 Build - EP3

[@Metalution]

Greddy..”this is a bolt on solution”….yeah, ok. Just cut here 👈here👉here👆and here👇.

[@9373innes]

Defo not just a bolt on. 😄

[@theo9436]

Wanted to say that Greddy has a very different definition of "drop in" than I do !

[@tofubadguy]

It weeds out those not capable. 😅

[@VideoShowMeHow]

Love it 👌

[@doug774]

Either cut or remove the reo bar, this is normal for s15

[@shiftdowntv4511]

All that Greddy stuff in there looks so vintage 90s JDM. I love it.

[@hectorn.6137]

fr. it's '97 in that bay.

[@jrbuch]

The S15/R34 GTR really were peak Nissan. This is soothing to watch. P.S those Greddy LS intercoolers are a good bit of kit. Mine's supporting 550whp behind my 1JZ and has been for a few years, no problems touch wood.

[@lancefitzhenry5410]

TIP: If you're removing or installing the radiator, you don't have to pull the fan at all. Just unclip the lower section of the shroud, remove the shroud and radiator as one. The lower removable piece on the shroud is made for this. No need to deal with the awkwardness of unbolting and bolting the fan with the shroud in place.

[@speedacademy]

Heck yeah, I saw that and thought, hmm I bet this piece comes out AFTER removing it all.

[@PaterBoy17]

Legit the best car enthusiast channel on KZbin right now. Keep up the great work guys! I’m home on paternity leave and your channel is what’s getting me through the sleepless nights!

[@bakamotorworks505]

I do appreciate that Speed Academy appreciates synth wave 😎

[@all-flat-engines]

9:13 This right here is why I’m importing a JDM 06 STI. Canadian cars are a 200k+ & a rusty pile vs. JDM car are 100k & a joy to work on

[@JwblackRS]

Me: Pete seems to always go overkill on the PPE Also me: gets rust lodged in my eye while wire wheeling with safety glasses

[@kd4000]

Good explanation with the blue tape, I was thinking why not just leave it on.

[@aroundomaha]

This car is a looker that will also run like a champ. Yet another awesome build. The exhaust bolt loosening was freaking hilarious.

[@christophercasale7961]

I've lived in Florida and NC away from the beach most of my life and those bolts were easier than anything I've touched with over 80k miles. Incredible.

[@casefc3s]

I wish I could install that many parts on my car in 30 minutes and with so few curse words, rust, and replacement of parts that broke along the way! xD Really looking forward to the driving vid to see how it's transformed!

[@Sebbe40]

I love your philosophy modding cars. 10/10

[@johnkonzik6693]

Would so love to own this car. I like what you guys are doing but also like the idea of LS swaps on this platform. Good job guys. Thumbs up from NJ.

[@Warongold]

You guys are partnered with throttle? Wow. I unscribed from then because their content turned into watching a 90s infomercial. Keep up what you guys are doing your the best car show on YT

[@speedacademy]

We arent really partnered with them, just guiding our audience to their site to buy stuff so its an easy one stop shop for people.

[@Warongold]

@@speedacademy gotcha. Well not that it's a big deal but you guys are better content I'm my opinion

[@thestigsgermancousin4479]

When unhooking the steering shaft, remove the rack side bolt because there is an alignment-pin. Makes it easier to put it back together and have a straight steering wheel.

[@stevetrepanier4351]

I lovethe beauty shots of the legit HKS / greedy / Tomei stuff. So nice. Gives me a warm and fuzzy feeling. Don't stop doing that.

[@michaelporturas1821]

So amazing to see an SR in its original factory form!

[@ahwee77329]

a rubber care spray on the rubber hose before installation and during removable hoses and stuff helps alot.we use them alot at bmw dealer.

[@14KShadow]

I just love the music you guys pick

[@pFbSpecV]

Bolt on kit with all that cutting hahaha kinda funny but freaking awesome! I’m a fan of this build!

[@josecalderon3265]

I like how you guys always use the right proper protection 😅

[@hengv.9843]

DP laughing in the background during PT's frustrations. 😂

[@zc6aozora]

This style of intro is best! Another excellent video fellas!

[@Busydadgarage717]

So close. That thing cleans up nice.

[@SuperCrex]

I Love the music. One of my favorite videos.....such a cool car.

[@garagecreww]

It’s cool seeing the oem stuff come out of the car

[@Dirtyz1234]

Turbos bolt on... And I'd say a slightly up sized turbo is safer than maxing out the stock unit

[@rm6330]

No harm in running the factory turbo to it's limits of flow before upgrading unless specifically chasing more than 200 rear wheel kilowatts.

[@olu]

I know you guys love the "all-arounder" builds and I enjoy watching all of it, but it'd love to see you guys do a big power (4 figure hp) build!

[@speedacademy]

Theres a ton of channels doing that already so not really something we have interest in.

[@kevinlau1904]

the innuendos in this eps are thru the roof !

[@Subydude-rp9yv]

Just noticed so it might not be new for you. But congrats on 600k

[@dakotarodgers9988]

Loving the new music.

[@HRDNTS]

Those front bumper supports are like gold un-cut lol. I had my similar kit Trust intercooler installed and it asks you to do the same thing. Then ages later I thought I'd be responsible and get all my mods certified in NZ (basically a way overpriced check to make sure everythings safe and they log it all and take pics etc) and yeah, cant have a cut bumper support apparently! Was a mission finding a replacement. Got the last one in NZ at the time.

[@_Suzuka_Joe]

im upset you had no issues removing those bolts. I went to put an exhaust on my 17k mile 981 GT4 and promptly snapped a stud on the exhaust lol, also I’m in okc so we don’t even have rust here. My 180k mile RSX is spotless underneath

[@dancarlos1216]

S chassis looks so damn good when they aren’t drift boi spec!

[@tremainessj]

love s15s im hype for this to get running!

[@dwxplays7987]

Black couplers all around would have been awesome

[@CraaaigV302]

Love the greedy bolt on front mount kit but man the blue couplers are HIDEOUS I personally would swap out the blue ones for some black vibrant couplers with some Constant tension clamps and it would be dialed 👌🏼

[@aconfusedazn]

It’s almost a historical color.

[@nikothecrazygreek]

Literally building my dream s15. Love this series one of the best ones

[@kevinbowman3592]

Love the sr20det build, they don’t get enough love. Such an underrated platform. What ever happened to the evo?

[@mattxr4]

This is exactly the way I would mod an s15. Basic bolt ons make them such a fun street car. Only thing I would have different would be the wheels. Some 17" buddy club p1s are what I would have. Such a shame that the average s15 in Australia is going for high 30s to mid 40s.

[@SilviaSean]

Pro tip. Spray a little hair styling spray on the couplers and never have to worry about boost leaks

[@benmason7620]

Don’t forget to replace the coolant lines under the inlet manifold. Better now than later!

[@tkflex2332]

Love the Gready blue couplers 😬

[@jhref]

Love them!

[@ScottMerrihew]

*Connie stares menacingly*

[@christophermccullagh8997]

Love the build. Just wondering why use didn't pull the engine and paint the bay when use got a high end paint job?

[@cameron6554]

Makes me want to work on my s15.

[@juanc5149]

Really wish you would of done a baseline dyno and track time.

[@RyanBradfieldRacing]

Not sure if it’s been mentioned yet, but I think the soft material in the airbox is carbon impregnated and used to absorb fuel vapors.

[@y.b.-]

Man, either this car was always maintained at a very good shop/ Nissan dealer or had absolutelly no mainteneance at all, otherwise I dont see how everything was easy to loosen/unbolt. I can confidently say that it is the first S-chassis project that I see in such remarkable conditions

[@MarianVC57]

wow, nice distinctive daily!

[@Driftit]

It's just like 20 years ago in NZ. But with fancy camera's.

[@corygrimsrud1474]

Great build, it would have been fun to see the before/after dyno sessions.

[@M-F-CORGI]

Im all for og parts, but watching you drill into the bat tray for some cooler piping hurt.

[@turbo_brian]

Ngl this whole build kinda hurts. Such an original car and you're drilling into it. Like I get it back in the day we did this all the time but now this things a classic in stock form.

[@speedacademy]

Its a car with 200k+. Hardly collectible, its the perfect car to do this to

[@TheMerwais]

I can't believe how smoll the intercooler and rad was. No wonder they were overheating

[@solanod12]

"it's a finger day!" 😂😂😂😂

[@jykrew3978]

great video! i miss the glory days of Nissan by the way, as someone from montreal trying to get their first car in this current used market, what would you recommend?

[@amoni1959]

That extendable socket wrench looks pretty good. Where u guy get it form?

[@raines48]

You guys need to get turn14 to stock hardrace! Please make it happen.

[@Dibbs10101]

This is looking to be a fun everyday car. Not going so wild as to being something that gets parked at the threat of rain.

[@FiftyFiftyAmoney]

Awesome as always!

[@proactivefiresafety954]

You guys need to do another car giveaway contest 😁🤞🏽

[@nugienazrilchannel]

Work smart and savety ..nice

[@lipvandip6480]

The fact you've kept the viscous fan (which almost everybody deletes) will massively help your cooling too

[@rt4wd_wolff]

If it requires cutting its not "bolt on", but yes it is a pretty straightforward install 🤙

[@holdenrt01]

Where did you guys get the sick beats from?

[@blue04mx53]

Is it easier to undo those wiring clips and connectors when the car and ambient temperature is warmer? Everytime I work on my car I either break a clip or a connector. Many of them just won't freaking budge. Should I do something radical like spray them with WD-40 or silcone? Help help !!

[@ChopstikCharlie]

kinda hoping they might offer this one up for sale one day soon... 👀

[@kylemack8864]

For like 40k-50k usd

[@chazparker2488]

I want that SWEATER!!!!

[@geoffspencer2002]

Shouldv done a turbo upgrade, like a hks Bolton or somthing and e85

[@pj9375]

The apexi air filter for the SR is waut better looking than that weird yellow one. Is that greddy?!

[@_Machine631_]

9:27 sounded like he said "Gotta get the ball buster out." when they do that a bunch of wives come out nagging them. *that tool is an engine strut stabilizer/Support

[@hayleywhitmore3084]

“It’s a bolt in solution which I do like” …Proceeds to cut holes and brackets all over the front end

[@gen3v8]

Good viewing

[@mapwheel00]

The SR20 is PT's mortal enemy. It's only a matter of time before that bad chicken coop mojo finds you and the other shoe drops! I'm not used to seeing him work on an SR20 with so little swearing.

[@MichaelCoolGuy86]

Why not diff mounts/bushings?

[@speedacademy]

Too much NVH

[@birdman0607]

What body shop do you guys use?

[@dbeckMSP]

Why does this have 2 fans? Looks like one electric, one fluid clutch?

[@speedacademy]

One is for AC

[@dbeckMSP]

@@speedacademy ah thank you!

[@while-loop]

What exhaust is that?

[@equinoxgts]

Which rep bumper is that? jsai?

[@kylemack8864]

They got it from Japan. Check the original videos for this car

[@joshb3623]

Don’t ya just love when the bolt just loosens and doesn’t fuck up the day🤣 sheesh I hate rust y just y does it exist 🤦‍♂️

[@ldadol]

Link to the blue film crash-tape stuff?

[@speedacademy]

Sorry there now. Its industrial.sherwin-williams.com/na/ca/en/automotive/catalog/product/products-by-industry.11543383/fastline-weather-barrier-film.10684075.html

[@wartbiter]

Those yellow mushroom air filter things let through a tonne of dirt. They no good.

[@maynoz377]

Is this one S15 for sale?

[@speedacademy]

About to be. Shoot us an email at [e-mail] if you’re interested.

[@maxboost259]

Why didn't you dyno it first? The people love before and after numbers

[@tahahaider5836]

8:09, 😏😂😂😂

[@taco....]

Every day is finger day

[@sodtoast]

Throtl nooooooo. I ordered rear shocks for my truck from them. Originally eta was 3 months out. They changed my shipping date 3 times and they charge you 5% to cancel your order. That doesn't sound like a lot but on stuff $1000+ it adds up. After waiting 10 months they changed my shipping date to another 5 months out. I finally had to go with store credit. I used PayPal and they couldn't refund my money after 180 days from purchase.Luckily had a car that needed a set of wheels. Very frustrating and stressful experience

[@mrphiscal]

First comment( support the fight against the algorithm)😂

[@Sick_Boy.]

“Crack these nuts” HA!

[@kenshinhimura9387]

Should have gone vg30dett instead.

[@markmartin7384]

Kinda weird that it has a belt driven fan and an electric fan??

[@garnetheron4885]

Don’t throw away that stock, muffler and catalytic converter. Also do not sell it. Keep it with the car for future use just in case.

[@speedacademy]

Yes thats always the case with our builds.

[@sapperROSS]

Why greedy? It was cool in the 90s but there's better cleaner options.

[@evoemperor3776]

Hate those air filters they look like desktop fans.

[@JustAnotherHouseCat]

The megan racing hardened rubber mounts are way too stiff, the nismo are much better.

[@RollingRoadEFI]

Catalaydic converter lol

[@rickycortez6733]

Bro watching you cut the hose with the blade made me cringe. I just did that yesterday and the blade slipped and right through my finger. So….a few choice words and 4 stitches 🧵 later.

[@sesparza5020]

Cheap S15 Expensive build*