Quick way to disconnect fuel line connection on Toyota. No tools

Рет қаралды 51,670

Күн бұрын

Пікірлер: 47

@nsummy Жыл бұрын

great video. I bought a tool set from harbor freight to do this, but most videos demonstrating it arent very clear about what is happening (or what needs to happen to release it). Glad you could show us the inner workings.

@repoman6034 Жыл бұрын

Dude! Thank you for showing us what is possible without the special tool. I struggled with the standard Lisle plactic disconnect tools, but they are slightly too thick. I used some plastic from windshield fluid bottle to form a sleeve, then held with small hose clamp. Worked like a charm.

@tonedubb4325 Жыл бұрын

No problem. I hate buying specialized tools that I only use one in a blue moon. Like to think outside of the box and to save money as well.

@johnverg6809 2 жыл бұрын

Thank you very much for this video, I tried very hard to disconnect this connector by other means and I could not do it, but after looking at your video I got it off very quickly :)

@tonedubb4325 2 жыл бұрын

You're Welcome 😊

@ILoveChanelLynn Ай бұрын

You saved the day thank you! 🙏🙏🙏

@jimmyfavereau Жыл бұрын

a MacGyver graduate : ) thanks for the vid Tone!

@kevinoneill41 8 ай бұрын

What was wrong with Banjo or Plummer's clamps? Worked for 100 years. You just can't perfect the wheel any moor. If it isn't broke don't fix it.

@tinyjamaican 22 күн бұрын

Appreciate you for this!

@muchmuchmore Ай бұрын

Thanks for the video. Super helpful

@bouhalioussama473 2 ай бұрын

You're a life saver

@alafrosty 6 ай бұрын

Good content that would be a lot better if you had all the action in frame instead of out of frame.

@tonedubb4325 6 ай бұрын

That's why happen when you can't afford a camera person. Lol.

@shinola228 4 ай бұрын

I bought the regular tool but that extra flare on the line wouldn't allow it to work. So l made the tool from a permanent marker cap . But l like your idea about using a piece of an aluminum can . One tip for anyone struggling to get the line to separate is to push the lines towards each other while inserting the tool.

@tonedubb4325 4 ай бұрын

@shinola228 try watch this video. See if this will help. kzbin.info/www/bejne/gmOzY6eLqKZ4ndksi=1MonzpQAcVwQjix8

@wellnesspathforme6236 2 жыл бұрын

A+ for creativity on that home made tool, and then explaining it. Thx.

@G.S.B. Жыл бұрын

Helpful. Thanks for posting this.

@rogermclain1005 2 жыл бұрын

can you send me a link to that Lisle tool? Ive tried what you showed but I can't get it off I have a Corolla 2001

@tonedubb4325 2 жыл бұрын

Since the hose still attached to the car, it's actually easier to remove the connection using the drip hose. Just be a little patience. You can also cut a aluminum can and bend it into round shape to insert to release the clips. Here's the link to the part. www.ebay.com/itm/233112747147?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=3TswiUjvSCu&sssrc=2349624&ssuid=IPwfKrY2SMG&var=&widget_ver=artemis&media=COPY

@klmullins65 Жыл бұрын

I was able to rent the tool from O Reilly's...but the replacement hose is too short!

@vossenspringer 4 ай бұрын

Can someone please explain why you need to disconnect the fuel line at an earlier point instead of just pulling out an injector? Does disconnecting it there block the incoming fuel from leaking away? Or is there some kind of other benifit frim it? Or is it just for safety in case the car is still on contact or something? I didn't disconnect that and exchanged an injector, but now the car starts very late, after 2 cycles of the starter motor, and it smells of gasol8ne when I start, but it runs fine without smell. I'm confused...

@tonedubb4325 4 ай бұрын

The fuel rail and line have pressure. You don't need to disconnect the line to get to the injectors. Be mindful when you disconnect the injector. Gas will spew out. It's best to cover the rail with a big rag so the gas spatter on your face. Clean all the injectors with carb cleaners. Attach a 9v battery to the injector plug to open the injector. You should replace all the grommet gaskets on the injector. You may have an injector that's not properly seated or gasket is bad.

@vossenspringer 4 ай бұрын

@@tonedubb4325 Thanks for taking the time to reply! I just didn't understand why people would go through so much trouble to make a special tool to disconnect it at these earlier points when you can just carefully pull out the injectors using a cloth or something like you said, it's even easier to catch the spilled gasoline from there, instead of it leaking out all the way at the back there... But in case you need to take out the rail to connect it to the carb cleaner, I understand ;) I have a spare rail for that.

@robertbirdsall4571 Жыл бұрын

Thanks alot, very helpfull..much appreciated my friend

@jonasstokke84 10 ай бұрын

The safety clip on the connection there it says "NO REUSE". Any idea where one could get that part?

@tonedubb4325 10 ай бұрын

That's a lie. Is there writing in it? I never saw it. I have disconnected and reconnected many times. I used the same lines with no issues.

@soliscars857 Жыл бұрын

it work, thank you so much, it save lots of our time.

@tonedubb4325 Жыл бұрын

You're welcome!

@its_actua11y_me Жыл бұрын

Broooo Mt runx is running ❤❤❤

@DagdaMadoc Жыл бұрын

Dude, excellent video. Celica repairs, bees, tractors, farm stuff?!? I just very happily subbed to your channel.

@tonedubb4325 Жыл бұрын

Thank you.

@klmullins65 Жыл бұрын

I'm having trouble finding that particular fuel hose...I waited 3 days for the part to come, and it was too short to replace the hose that's on it. A rodent had chewed a hole in the line and gasoline was spewing everywhere.

@tonedubb4325 Жыл бұрын

Try the car junk yard where they sell old parts?

@klmullins65 Жыл бұрын

@@tonedubb4325 thanks...they have a 2003 Matrix at Pull a Part, but I was hoping to find a new hose...I guess the only other option will be to go to dealership, which will probably cost a fortune. I guess I'll try Pull a Part

@tonedubb4325 Жыл бұрын

I dont know where or even what country you're at. Use parts going be whole lot cheaper.

@YVNGSSPARK 8 ай бұрын

@@tonedubb4325 do you happen to know the name of the fuel line. Replacing a part on a 01 rav 4 but Can't figure out if it's a fuel feed line. Fuel line assembly or some other name

@tonedubb4325 8 ай бұрын

@YVNGSSPARK I didn't know there was a name for it. Why do you need to replace it? Broken? Go to the dealership and provide your car info. I don't know if you can get that from the auto parts store. You can go to the auto wrecking dismantler to get the exact fuel line.