RadioMaster TX16s: First Look and Key Features Overview

[@chrisstolle5664]

Glad your now in front of the camera instead of behind. Takes away the mystery. Been watching your channel for years.

[@Painless360]

Thanks. I've been regularly appearing on camera since 6th August 2018... happy flying!

[@OverdriveTech]

Pre-ordered mine and it should arrive by the end of the month.

[@bensonfilmworks7595]

Lucky you. Where do you live? I'm in U.S.

[@Ferorga]

Just preordered mine in Banggood! Cannot wait to receive it and retire my old Turinigy 9XR :)

[@Director-M]

Hope you received it already! You really got your money's worth with the 9XR, great beginner radio and this TX16S is the perfect upgrade.

[@Ferorga]

@@Director-M I cancelled the order and purchased it on aliexpress. Just received a few days ago and so far so good

[@explosivefruits]

Loved the video, very excited for Aussie vendors to get these in stock!

[@ashb1433]

www.phaserfpv.com.au

[@andreaspap]

Your video made me choose the best radio i could by as a beginner in the FPV hobby thanks so much

[@HomeDronen]

I've been debating on getting this radio for so long, but someone suggested that I get the Jumper T16. I should've given Radiomasters T16 a try...it looks promising! I did purchase the Radiomaster TX, which is on the way in the mail. I'm pretty happy with my Carbon Jumper T16 v2..I hope both Radiomasters products are as good as the Jumper brand....thanks for sharing!

[@sasdthoh]

Thank you for your outstanding analysis of all RC products. I wrote to you previously about the reasons for choosing a QX7 / S or Jumper products because for years, thanks to your fine instruction videos, the X9D Plus has been respectively a flawless radio ( within human standards ) but the deal breaker for NOT purchasing the other radios is I can't use Companion. You caused me to become addicted to Companion. I can't live without it. Now, if this radio will be able to run companion, then I will purchase one and have both platforms. I have decided to skip the Jumper T16 / Pro all together. Once again, thank you for all your hard work and dedication. Paul ( sasdthoh )

[@Painless360]

I'll cover that with copying models and updating firmware in a video. As this is a cousin of two radios already supported by OpenTX the barriers to support have been a lot lower from what I can see...

[@ChrisBalmforth]

I've just checked and you can certainly use v2.3.7 Companion with both the QX7/S and the Jumper T16 variants. Not sure about this TX16s though.

[@leeturberfield598]

The 900mhz signal quality, thanks great vids

[@graywoulf]

Thank you for at great review of the basic features of this radio! 👍😊

[@adibbins]

Currently some very nice pricing on Banggood, thx for the links Lee!

[@jcfpv3454]

Hey well I finally got it connected I had to go back to the Lil bus then roll it back from there and my radio Master connected perfectly thank you so much decided to go through all your videos to see what I was doing wrong definitely a user error

[@IceCreams62]

Nice. Please when possible compare it with the Jumper T18 with JP5in1 module

[@aztecamaize]

I’m sold. Bye bye to my taranis! Frsky, you’re that much closer to the bottom now. How’s the view of you competitors rear end? Thank you Jumper & Radiomaster for your INNOVATION!! You’ve set the bar.

[@GBoniFPV]

I don't know bro. People have issues with their jumper. It been out for less than a year. We need to see how good the T16s going to be in the long run. I have a 3 year old qx7, and it still working fine.

[@jameslawrence8050]

It seems to be a nice radio. Thank you for the review.👍 I hope the marketed version will be as good.

[@MrApache64AH]

Hi, nice video, how are the corner trims feeling? as on my T16 they are not very notchy, so i don't know when they are centered, is it the same on the TX16S ??

[@flytelaw1]

Thanks, Lee! Looks like a great product....got a question...are we going to see you do a comparison of T16S versus Jumper T18 anytime soon? Cheers:-)

[@Painless360]

Maybe ;)

[@christopherstarzyk9209]

Does a 433mhz module cause interference with the radio like it does with the Jumper T16?

[@HermanKruisman]

They claim it has a better audio circuit, so i would expect much less, if any, RF noise. Would be nice to be in a review.

[@doberbert]

+1 had the same question

[@DavePinnock]

+2 for this. Only reason I havent bought a Jumper so far

[@evFPV]

Is it a coincidence that this lasts EXACTLY 16 minutes??? 🤣🤣🤣

[@bensonfilmworks7595]

I am preorder number 26 from Banggood, ordered March 25, 2020. Won't arrive in U.S. until about the first of July. Sure hope it's worth the wait!

[@jwc4520]

Bigger and better toys, ok. I look forward to learning g more, so get to work. Take care in these troubling times.

[@Lost_van_lost]

Nice Video it will be great to have more videos about this from you

[@bombetdavid]

Hmmm... will also wait for that Jumper T18. 🤓

[@gerdanc]

Do you know the charging specs for the internal charging module? They have warned against 3.6v nominal Li-Ion even though many are 4.2v rated. I would also love to see UART mods in the future.

[@rockyjohnIII]

My main concern is the range of internal Module as I fly fixed wing aircraft mainly gliders. The two systems I use are TGY-i10 and Q X7 both of which have receivers with 2.5 km range and the TX16 would be replacing, is it Comparable ?

[@peterzingler6221]

It has even more range thanks to 150mw. 3km on Xm plus no problem

[@scottyd035ntknow]

I fly fixed wing too and I have the Jumper T16. 0 issues at all and I get pretty far out.

[@samavella8831]

Thanks for the great video. As a suggestion, would love to see a video on the different uses of the two UART ports, including flashing firmware to external devices such as the FrSky R-XSR.

[@umeshjadhav3326]

I was waiting for this review, thank you very much, I really appreciate. Compare with jumper T16 pro Hall V2.

[@Painless360]

Sadly I don't have that radio, the big differences are that also has the internal multi-protocol module and hall effect gimbals but not the other things on this radio..

[@scottyd035ntknow]

The V2 is the same as the V1 Jumper T16 except USB charging (that is faulty) and the folding handle. Have had 0 issues with my Jumper T16 Pro Hall V1, have an external charging mod done to it and added the folding handle.

[@rccosplay3249]

Looks like my Futaba T16SZH. I can add crossfire as well☝ what receiver comes with it? Can one get ALL 16 channels? Can it put out Sbus? If so does one need special servos? Can one use Sbus in pwm out? Telemetry? Just curious as I might recommend it to others as I can't see any reason to get it over the Futaba T16SZH.

[@expertreview2912]

Can you please check out the sliders. They said they are an improved version of the ones ones on the Jumper.

[@waldemarkraus2855]

Is it using the same loose sliders like the T16, they are basically useless in this condition. Is it really an IPS screen?

[@Billbobaker]

When they are in stock.. I may order one.. I don't like the ribbon cables in my Jumper t16 however they have replaced the faulty ones.. and other than that it is a great radio... but what if they fail while flying.. And I think I like the button layout better plus external charging port, metal scroll wheel. Good solid review.. thank you.

[@RobertAlexanderRM]

Very nice video. One question: my TX16s does not "chirp" anymore while binding a new receiver. Ideas as to what setting/cause it might be? Thanks a lot

[@gearhound8601]

Two questions, one does the antenna unscrew like the jumper? And two does the crossfire mod powered up cause interference in the speaker like on a Taranis qx7? Thanks for the review, I’ve been very excited about this radio since first hearing about it.

[@kevbarry6457]

Help, I'm going down a rabbit hole looking for an explanation of the charging light on the TX16S. I have the gold bling version with the leather comfort holds on the sides. I was expecting red for charging and green for go. Is this correct? It doesn't seem so. Cheers.

[@Painless360]

LED shows charging status, but is also controlled by EdgeTX when in use. EdgeTX changes the colours in 2.10 so there isn't a set colour use... Happy flying

[@lloydpedvis238]

In the next video, would it be possible to take a look and review the usb charging system, and test the side levers L1 and L2. Thank you.

[@Painless360]

I'll add it to the list.. :D

[@lloydpedvis238]

@@Painless360 Thank you

[@calibermix8159]

USB charging is ok and levers are better than Jumper but not perfect

[@NATGEOANDSTUFFPaulbrannan]

looks great lee.keep up the good work my friend stay safe

[@Painless360]

You too buddy..

[@nikleiser5888]

Will it work with the Accst 2.1 protocol? Can you read the screen in direct sunlight?

[@Painless360]

Yes and Yes.

[@jocelyncloutier]

Nice early review! From what I remember, the jumper t16 has min of 7V which is weird since LiIon battery can run easily down to 6V. Does Tx16S also has spec that says 7v? Can you try to run it at lower voltage? I find it annoying to need recharge of battery when they are 50% full.

[@Chilla2006]

10:38 you can go down to 6.6v

[@kingblade6563]

Hi Love the channel very informative. Looking at getting into the hobby so have built a cessna 162 (980 wing) and ordered a RM TX16S Max. Can I use the Spektrum AR637T 6 channel receiver in the tx16s? will it support the SAFE functionality?

[@OneTwo-wt8qv]

WOW under 200 USD ... JR module ... touch screen ...really like the screen size and image quality ... If I didnt have such a nice Taranis ALREADY .......CHEERS !! .... ; )

[@ChristKrew-Rev1.8]

Question... the boy and I have x9d+ and now the tx16s's. We use our x9's with tbs but seriously considering expressLrs. Which radio should we use with tbs and which should we use for expresslrs? We mostly fly micro's as we really do not have a place to fly our 5 inch racers and will mostly focus on yard racing and park racing micro's with friends... What are you thoughts? Thank you again for all you do for this sport/hobby!

[@Painless360]

Both use CRSF so both will work great. I have used both with both with no problems.

[@smp1990]

awesome vid, still waiting on mine to ship. who else checked their phone @14:55 ?

[@WrongWayFPV]

Same here lol... I check to see if it shipped every day 😂

[@gerdanc]

Is the space between the top switches larger? I know pinchers complained about that and some even removed the front two.

[@NATGEOANDSTUFFPaulbrannan]

would defo love it but i love our qx7 when its fixed lol.this though realy does look intresting .

[@avman180]

Looking forward to seeing more on this so thank you as always for the informative videos. When I held a Jumper T16 Pro one of the things I didn't like was that the left and right sliders didn't have a very pronounced indent at the mid point. Is that any better on this radio?

[@wtfmimshag]

Great video. Would it be viable to essentially replicate the Jumper T16 models onto this and be able to swap between them? Im thinking it would be nice to have a fully configured backup radio that you could switch between at a moment's notice.

[@awuma]

Can this radio simultaneously connect with the Tx/Rx and put out the USB gameport or trainer student cord signals? I need to be able to switch between the FC using the radio signals and use MAVlink upload via G4/LTE (UAVcast on the RPi companion computer). Currently I am using an old Hitec Eclipse 7 with 2.4 module, and the GS connected via the trainer port (PPM output) with a PPM to USB dongle, with both signals working simultaneusly. This works in my living room, but obviously a more modern setup is preferable, including better Tx -Rx than 2.4 and providing direct radio telemetry in addition to the LTE/MAVlink. My nicer (but still old) Aurora 9 does not allow simultaneous module and trainer port use. I could steal the PPM output to the module, but is the PPM signal sufficiently buffered to drive both the PPM to USB dongle and the Tx module? I wonder whether OpenTX (and the GS software) could be configured to switch between GS/MAVlink "Joystick" control or Rx control (SBUS /PPM) ? This would make everything controllable from the handset without using the mouse and GS computer screen to switch between "Joystick" and "radio" using QGC or MP (developing with both). My intention is to have the radio and GS computer with screen on the same neck strap supported tray.

[@twinturbostang]

Wonder if the change in wiring will make it less susceptible to external "noise". The Jumper T16 has big problems when trying to run it with Dragonlink 433MHz.

[@nightflyer9127]

Lee great video. Any idea if it will buddy box with a Jumper T 16 running open TX?

[@crackup007]

Hello, very good review! I would like to know if the radio has ready mixes for use in airplanes, as a mix for Coupling and other common ones in radios such as futaba?

[@pksteffen]

Great first look at a radio many of us having been waiting a while for ... my question is about touch screen. Some say they typically have less contrast. But that looked good. How would you compare to Jumper T16?

[@kaijupower]

Thanks for the feature video! What size are the gimbals? If these are the same size as the QX7, I'm definitely buying this!

[@pav2k]

Are the gimbals bigger on radiomaster? Or is just seems like that? Thanks!

[@alasdair4161]

It looks like a great Frsky replacement/upgrade. Just one thing, does it support LR12 mode for the L9R receiver? I have too many of them to sacrifice for changing to a new radio type. Cheers, and thanks for another great review.

[@Painless360]

Yep.

[@xray_slight]

Is the radiomaster balanced well? (i mean holding a level during hanging on the neck strap?)

[@Motion_0112]

Does this work with the FrSky R9 module? The 2019 version with ACCESS

[@theslippieslik]

Great Video! Question: Does the JR Bay cut power when using the internal module?

[@jessestridge5708]

Is the wiring improved over the t16 pro? I'm going to have to open up the jumper again to fix a ribbon cable to a shoulder switch because it inexplicably has stopped working again!

[@jessestridge5708]

Oh wait! I just saw! Literally going to sell off my t16 now.

[@faktalist]

Do this tx can bind Frsky R9 receiver? How to power multiprotokol to connect R9 receiver?

[@lsmedalla]

Hello, i want to know if can we use the t16 with dji mini 3?

[@thebikeracer]

Will the crossfire version still work with other receivers? Is it a simple switch in setup between internal and external RX for communication?

[@GBoniFPV]

Yes, you just need to select the appropriate tx ( internal or external) based on your rx

[@MadManFPV]

Does the Radiomaster have the two open switch circuits like the Jumper had? If so, it would be easy to add two new switches to the back of the radio. Also, can you tell me what you would do with the open UARTS? Maybe, a ground station... if peep's even use those anymore! LOL

[@786free1]

Thanks for the video. What is the speaker sound like and does it have a headphone jack? So to charge it would u have to remove thw bottom rubber tab?

[@Painless360]

Speaker volume is ok but not super loud.

[@michaelroberts26]

Thanks for the early review of the TX16s, very very interesting. I've been flying RC planes for about 7 years but only consider myself to be only an intermediate RC flyer. Looking to upgrade my Spektrum DX7S transmitter with a new Spektrum iX12 touch screen but fell over when I saw the USD700 price tag! However, if you take price out of the equation (because I'll probably have this new transmitter for a few years) would you recommend the TX16S with MicroTX over the Spek iX12? What worries me is that I'm used to the Spektrum and it appears comparatively simple (although the iX12 is quite a technology upgrade) & I may find the TX16S a bit daunting with its complexity. I noticed your earlier "go to" transmitter was a Spektrum DX7 so moving from Spektrum platform from functionality, quality, and ease of use perspectives (forgetting price) which would you recommend?

[@Painless360]

The DX7 was about 6 years ago and a lot has changed then. Check out the OpenTX MiX School that starts simply for pilots coming from Spektrum (like I did)... Best of luck!

[@staviation9238]

would this be considered as a competitor or equal to the jumper t16? Or would it be a competitor to the jumper t18? I understand that this is a rather open question. But I am new to the hobby and trying to decide between a jumper t18 pro or a radiomaster tx16. Which one will be more future proof and have more capability? I would assume that both have up-gradable firmware?

[@Painless360]

See my video comparison on it. Happy flying

[@rline88]

when i change the color of the telemetry widgets the color always stays the same. is the problem known? also has a friend of mine with his tx16s and his old jumper t16

[@billneudorf91]

Hey I've got a question thanks so much for the video the question is is there anyway in the radio you can set your travel rates past 100% I'm setting up an airplane and I'm having difficulty getting sufficient physical Servo travel is there some kind of firmware update you can do to go past 100% I know my old Spektrum radio I could Crank It Up to 150 % to get more physical travel out of my servos an answer would greatly be appreciated thank you very much

[@Painless360]

Hi Bill - preview for you kzbin.info/www/bejne/d3aWdJKCiM6mpsU ;)

[@benfoust1]

what's the whole deal with the multiple FrSky protocols? Is it that this one is compatible with all the different modes including the new ACCESS protocols and such? Also, did you mean the one you have has built in crossfire or just crossfire compatibility?

[@Painless360]

Crossfire compatible - see the Crossfire series on the channel..

[@IamBrian2]

Is the antenna removable? Great introduction video BTW.

[@Painless360]

Let me check and answer it in the follow up video.. :D

[@calibermix8159]

it's removable like any other antenna but it's not detachable as the Jumper one

[@IamBrian2]

caliber, so it has an SMA or do you have to take it apart?

[@RCjunkie]

I like long sticks but can you add longer ones?

[@trevor5290]

Hi. Will this Tx work with Spektrum DSM2, DSMX, Do you need to buy a module for this purpose.

[@Painless360]

Yes and yes. See my video on it.. Happy flying

[@UilKerk]

Thanks for a great first good video about this TX that I pre-ordered. It want me to have it NOW. I saw a comment about the sliders of this radio. As I am using a Taranis X9D+se I like the sliders a lot and I also have them programmed a lot on my models. So I second your closer view on these sliders in the next video please as otherwise I have to change them to Taranis ones.

[@jonaswalther9245]

Does the slider have a more marked center point? Which version of OpenTX does it come with?

[@Painless360]

Yep, with detents...

[@100SteveB]

Looks very nice. Barring any teething problems i might actually get one of these. At the moment I only have one radio - my faithful Taranis X9D Plus. I have be wanting a second radio, so one of these looks like a good idea. I would not really want the touch screen, my fingers have enough trouble with my phone screen, so touch screens for me are more of a frustration than being helpful. But i would certainly go for the hall effect gimbals. I take it that it will be compatible with the Frsky R9M protocol? That would be a must for me. Let us know how you get on with it. Thanks.

[@AlexCastignani]

hi very nice review, i'm thinking on buying a RadioMaster TX8/JumperTX T8SG, the diffrences in this 2 radio are just the chanel and the bottom uart!?! i need a good radio to update my old flysky with frsky and hall gimbal... which one do you suggest...i'm on the budget side. ciao alex!!!

[@roymoon1]

Dont short change yourself on Xmitters. I did that and regretted it. You can do so much more when you have the spare channels. I like my steerable nose wheel on a separate channel, but mixed with rudder. that way I can trim ground steering with out messing up the rudder.

[@brandonpurdy7658]

$99.00 If you need a radio I would jump on this immediately.

[@HermanKruisman]

Without the HALL gimbal and no touch, but still a good option

[@Jeffers3094]

Might be a hard question to answer but does this use the same gimbals as the X9D Plus SE (old version). That's my one issue with jumper, I hate the gimbals, prefer X9Ds hall effects so much more.

[@spodfpv5930]

Looks like an awesome radio! Has it got a SmartPort function so I can flash new firmware to my receivers? Thanks!

[@bert5376]

I really would like to get this radio, but do you know if they are coming out with a cf case edition? I will rather wait for that.

[@Painless360]

I'm not aware of anything new round the corner..

[@petermarshall2189]

Can you confirm the Multiprotocol module has the bootloader, so can be updated from OpenTX ?

[@zagifeedup7532]

Is it possible to transfer models from the T16 to this transmitter

[@geralddsouza1348]

Hi, I just saw this video review of the Radiomaster TX16S. Just want to ask you, What is the difference between the Basic version and Mid and Crossfire versions? Other than the price.

[@Painless360]

All covered in the video. It's the gimbals and Crossfire module..Happy flying

[@sushia.f.1809]

Fully supported by Open TX or a hybrid thing like the Jumper had... Also.. Full size crossfire fit and finish. Can you show that.. Balance on the strap the same?

[@sherwoodp2738]

Painless, you first touted the manic wonders of the Jumper T16 then a new and improved Jumper T16 Pro V2 came out and that became the new benchmark. Low and behold, Radiomaster T16S is released and now appears to have raised the bar even higher. Given two great new and affordable radios, do you plan on doing a comparative showdown or do you already have a preference?

[@Painless360]

There was a very good reason that I stopped videos on the T16 and all the different versions - as I cover in the video. Later versions seem to be a lot better as they got the teething troubles sorted but by then so many of the first wave of customers with the original had been left with broken, unreliable or outdated radios. Mine still has issues thanks to the ribbon cable construction (see other posts). This one looks like it fixes all of those weak-points with the exception of the stubby sliders on the shoulders... The Jumper T18 should be interesting to look at to see what was learnt from the last 18 months..

[@DingBatSplat]

I've got a T16 Pro Hall. Ditch the spring loaded battery box, its a crash(due to intermittent power supply) waiting to happen. Only use soldered battery packs. I've managed to get 21700 cells(5000mAh) in mine instead of the 18650.

[@HermanKruisman]

Battery boxes are banned at our field. They cause to much issues. Only soldered packs are allowed.

[@thegooserider7245]

I have the same pack as you. It's not run out of battery yet 😂🤣

[@jpsalis]

The battery box is a little tight, the solution is to bend out the walls of the case after heating it with a heat gun for a little bit until it is flat.

[@pkendall64]

What is the distance from the centre of the gimbal to the edge of the radio. This is an important measurement for us with smaller hands 😀

[@alumahomeinspections7009]

Hi, I am newer on these things and I made a bad or incomplete flash firmware update so, My Radiomaster has lost its original settings. Is there a way to reset it to the factory data?

[@Painless360]

Tricky if you didn't back it up first (as I show in my tutorial). Best of luck..

[@guuskoelman8254]

I am searching for a new radio because my Futaba is in its last days. For me the Open TX software is very attractive after the tight Futaba jacket. What is your opinion about the Radiomaster tx 16 s on reliability. On Banggood I see the mainboard and lots of other spareparts.

[@Painless360]

I'm guessing you are not a regular viewer. See my video on the latest colour editions of this radio from last week..

[@guuskoelman8254]

@@Painless360 Thank you very much for your quick respond. Second question if I may.Could you tell me which 8 ch receiver is the best choice for telemetry and which variometer. Apart from the TX I have to purchase new receivers and variometer. And changes in the receiver software if neccesary. Black would be OK but the bling bling version you showed is marvelous. (Not available on the Banggood website at the moment.)

[@oldbiker570]

Hi i flew rc planes from 1977 to 1990 rc radios came complete with servos battery pax for the plane and radio and charger for both. I ordered a volantex asw 28 and thinking of buying a radiomaster tx16s cheaper version. I don,,t know what i need to buy in order to fly the asw 28. The plane comes with servos. But i guess i have to buy batterys chargers recivers testers. I know its asking alot but could you help me out of steer me in the right direction. Not easy getting back this hobby. Thanks Paul

[@oldbiker570]

Thank you for your help, and kindness. Paul

[@jpsalis]

It's kinda nice that the radio doesn't have those weird gimbal adjustment screws the T16 had, it was kind of a weird feature, and it was just another failpoint. I kinda feel like I shoulda waited on my T16, but still, the same thing happened when I bought my DX6. Immediately I had regrets that I didn't get a taranis or a DX6e that had just released but honestly beating myself up over it isn't gonna do anything. I didn't know anything about the newer radios when I bought mine, and at the time it was the right decision. Still feels bad though knowing the TX16S is cheaper than the top-tier T16 I own.

[@elikjacobson7544]

Hi, great videos! 2 questions: 1. Until i`ll get my adapter, can i charge the lion pack from the USB port and plug it to the computer? 2. i have a rx8r FRSKY reciver, can you please refer me to the video that explain how to bind it ? Thank you!

[@Painless360]

You can charge the internal battery from USB. I don't have a specific video in binding.. Select Frsky as the protocol. Best of luck

[@RyanTLX]

There have been some early renderings where the logos and silver buttons below the gimbal were blacked or greyed out, which in my opinion was it look a lot nicer. I think the radio was bevelled in or something. These white and silver logos and buttons on a black background make it look cheap. Nonetheless, still think it's a great radio functionality wise.

[@MrStanni6365]

Can you see if the t16 folding handle will fit?

[@Painless360]

If I can get one - I will.. Stay tuned! :D

[@bluenightfpv2672]

What are the negative aspects of the control

[@YancySmithTurboRexPerformance]

Do I need to get the Crossfire version to be able to use my module or can I save a few bucks and get the mid price unit?

[@GBoniFPV]

You can use the module bay for whatever module you have. Any JR based module will work. No, you don't have to buy the crossfire one. Specifically if you already own one.

[@ElseysEmpireRacing]

Could you check if it has spare inputs inside to facilitate adding more switches, like the X9E radios have. Thx

[@Painless360]

Will do!

[@Billbobaker]

Can you make a screen widgets setup video.. I can't get the proper voltage to show on the battery just bars but the voltage shows 0.0. Seems there is a lot cool stuff you can do with the screen layout.

[@ab7rs]

what are the 6 buttons under the radiomaster logo for?

[@Painless360]

It's a 6 position switch

[@dodo3441]

Are the faceplates interchangeable?

[@johanhoahm]

Can you leave this radio on the direct hot sunlight for around 5 minutes? My jumper t16 is freeze/hang several times on hot daya

[@Painless360]

If I ever get a really hot day again here in the UK, I'll test it ;)

[@johanhoahm]

Thanks, now i'm back to qx7 because t16 made me lost 20cc warbird. Looking forward with this radiomaster

[@prathmeshdk]

Does radiomaster has same range as tbs crossfire micro?