RadioMaster TX16S Multi Protocol RC Transmitter

  Рет қаралды 28,391

Andrew Newton

Andrew Newton

Күн бұрын

Пікірлер: 183
@GroundControlRC
@GroundControlRC 4 жыл бұрын
I love these Multi-Protocol Transmitters that are available now. One TX to Rule them All ;-) Nice demo of the TX, thanks! See you in the Air!
@adlapl
@adlapl 2 жыл бұрын
Thank you - the best practice-focused review video on RadioMaster TX16S.
@AndrewNewton
@AndrewNewton 2 жыл бұрын
Thanks Adam, I do like to demo gear in the field if possible.
@deancooper5513
@deancooper5513 4 жыл бұрын
Happy with my TX16S.....as for the knobs, switches and sliders they feel fine and are very good quality. I think its quite a personal 'feel' thing as even comparing the TX16S back to radios I've still got from the 1990s the switch gear and pots feel well rounded and then compared to my FlySky I6 the TX16S is streets ahead on feel, detents, centering and reach for switches and so on.
@johanbergkvist8834
@johanbergkvist8834 4 жыл бұрын
DX9 Black: 830g. Didn't think I'd be putting my TX on the scales when I woke up this morning. I now have multi-protocol envy. Thanks for the review, Andrew!
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Haha, gave you something to do. I dont actually need multi protocol or a big colour screen but cant slow progress.
@peterlehmannl5972
@peterlehmannl5972 4 жыл бұрын
I’ve been using a Jumper T16pro since January with no worries. The first thing I did was to make a battery pack and throw away the spring battery holder,to many memories of bashing torches to clean the contacts and get them to work.
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Good tip thanks Peter
@davdaya
@davdaya 4 жыл бұрын
Nice touch Andrew.. showing us the stick cam.. feel like we are flying your planes.. 😎👍
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Thanks, I have had requests for more stick cam.
@SBWings
@SBWings 4 жыл бұрын
The Hall gimbal and the TBS versions come with a touch screen installed. You can test your touch screen using your Open TX software. Long press the System button (the left silver button). Page over to Hardware. Scroll down to Debug and select Analogs. When you touch the screen, you'll see an X-shaped cursor where you touch. Also, the X-Y coordinates will appear in the lower left beside the words "Touch panel:".
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Yes thanks, I did discover that after the review.
@greyraven2636
@greyraven2636 4 жыл бұрын
Andrew, thanks for your review. I am giving serious contemplation to purchase this radio. I feel it could very well be a successful replacement for my Taranis.
@AndrewNewton
@AndrewNewton 4 жыл бұрын
I think the buttons and switches may be better but not the pots and sliders.
@EnglishTurbines
@EnglishTurbines 4 жыл бұрын
It's a nice looking TX...My carbon case X9D with M9 Hall Stick units still works flawlessly though..The X9D is wildly overpriced now and has been so for a while...FrSky need to think about what direction they are going as they have alienated their customer base TBH...My EZUHF Module might send it berserk though like it does the Jumper T16..(no RF shielding)...???..Needs testing.
@coolcat7682
@coolcat7682 4 жыл бұрын
Looks really nice. Was waiting for a bit of review of this radio. THX.
@AndrewNewton
@AndrewNewton 4 жыл бұрын
No problem 👍
@Joyplanes
@Joyplanes 4 жыл бұрын
Lovely radio.
@marhar2
@marhar2 4 жыл бұрын
Multimodule is great for flying the Horizon Hobby UMX series which have built-in DSMX.
@danishyousuf7665
@danishyousuf7665 4 жыл бұрын
one of the best review about this radio over youtube.....Thank you Andrew
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Many thanks, I have to agree of course
@2old4fpv-k8y
@2old4fpv-k8y 4 жыл бұрын
Just an FYI for your audience Andrew, I just received the Hall version and the back is now connected to the front via speaker cables (that can be unplugged), as they have put in a larger speaker to combat the complaints of it being quiet.... not any more :)
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Aha, thanks for the update.
@elijahr6261
@elijahr6261 4 жыл бұрын
I just ordered mine! Waiting for it to come back in stock / release (can’t work out which one lol)! In regard to the grid, I believe that it was people not removing the factory protective film.
@AndrewNewton
@AndrewNewton 4 жыл бұрын
That's right
@DavidReynolds-kr6yh
@DavidReynolds-kr6yh 4 жыл бұрын
Great radio, I already have the jumper t16, but I’m thinking of buying it for those extra features.
@amanwithnoname3774
@amanwithnoname3774 4 жыл бұрын
Thanks Andrew Great video. I live on the other side of the "Big Ball" in Toronto Canada. Just waiting to get my hands on one ... No stock here yet. All the best Don.
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Hi Don, thanks
@EleanorPeterson
@EleanorPeterson 4 жыл бұрын
Interesting point about the throttle-stick ratchet, Andrew. Yes, some of us still like a positionable throttle that's not just a smooth friction band. Personally, I love ratchets. Oh, feel free to mock me, peeps - I know what I like, and I don't care! Although I can fly Mode 2, I much prefer Mode 1 [engine and ailerons on the right-hand stick; elevator + rudder on the left]. When I was running 4-stroke glow engines I always liked light springs on both Tx gimbals and a fine ratchet on the throttle so that every touch on the ailerons didn't rev the engine up or down like an overexcited adolescent with his first motorbike. I could also set the throttle precisely when I couldn't hear the engine. A perfectly smooth, ratchet-free, friction-only throttle doesn't give any positional feedback if you're flying a long way away and can't hear what the motor's doing. Being able to give exactly 2, 3, or 4 clicks on the throttle was very handy when setting things like flaps or elevator trims when the plane was a long way off. Nowadays computer radios do everything for you mixing-wise, and you can see the actual stick positions on a pretty LCD screen, but I like to keep my eyes on the model and feel what's happening. Looking at a screen is a great way to lose a plane. People flying electric-powered models - and especially quad-copters - are probably just more used to fiddling constantly with their motor speed settings; I can appreciate why they'd prefer a 'loose' throttle. Maybe they like to sound busy. Yes, I know that hovering a quad accurately might demand a mid-notch ratchet position... But maybe they just need finer ratchets. I made my own. Whenever I flew big (4 metre+) thermal-soaring gliders I used to have the variable wing camber on the throttle stick. I found it extremely useful to have a ratchet on it. With a simple analogue radio, when the plane was just a speck in the sky it was great to know exactly where the wing camber was set. Without some kind of notched reference it would have been too easy to change the camber when turning. Anyway, that's why I like a ratchet on my throttle stick: you can set an exact variable by touch alone without taking your eyes off the plane. Carry on, chaps.
@AndrewNewton
@AndrewNewton 4 жыл бұрын
And now I know why the ratchet effect is built in. Thanks Elli
@mauricioalves8860
@mauricioalves8860 4 жыл бұрын
Nice review, and thank you very much for that. But, as far as I have been looking for, I have not seen any review with the Radiomaster (or even Jumper T16 ) with 50cc or bigger size gassers airplanes. And that is a real shame, because both companies are missing a huge amount of money. Radiomaster and Jumper should also aim, face up and shake strongly the big and more stabilshed radio companies in that niche, in my humble opinion... starting with sponsoring the best airplane gassers pilots. Greetings from south of Brazil.
@bozosni
@bozosni 4 жыл бұрын
Nice video , can't wait for mine to arrive!
@richardpowellTV
@richardpowellTV 4 жыл бұрын
Hi Andrew, I'm not a lover of battery boxes and I have no idea why something as important as an R/C transmitter would supply one unless it was a cheap toy so I'm going to make up a couple of my own 18650 packs. Just to say I've been an avid follower of your channel since watching your reviews of the 2400mm Volantex and the 2000mm V2 and bought them both! Keep up the good work!!
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Thanks Rick. I actually have a 2S pack now, need more
@Billbobaker
@Billbobaker 4 жыл бұрын
Great review.. I ordered on because I'm sorta not trusting the ribbon cables on my Jumper T16.. I had one that didn't work when I bought it but they sent me an new one and all is well.. however I would hate to see my drone disarm while flying over a lake.
@thecraftking113
@thecraftking113 4 жыл бұрын
Really like the looks of that radio I do like that its easier to find trim vs qx7 which i use too. I noticed with a lanyard on you can't see muchnof yhe screen. Mabye a side mounted strap would be beneficial in order to see it easier👍👍
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Need a lanyard with thinner lines maybe
@mrfourtysevenman
@mrfourtysevenman 4 жыл бұрын
Wow a video of this used on planes and not exclusively drones? Shocker.
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Wasted on drones
@NeverenCH
@NeverenCH 4 жыл бұрын
I would love the TX16S with Crossfire but im not sure if i can even fit it in my Torvol Pitstop Backpack, it seems like such a tight fit.
@DavieRooker
@DavieRooker 4 жыл бұрын
Hi Andrew, it does look like a good radio. I still love my Taranis, but i would be tempted if they upgraded the pots etc. as you said.
@AndrewNewton
@AndrewNewton 4 жыл бұрын
I'd be totally happy with any of the three really. The big colour screen and multi protocol are just extras
@jimmytheriot8978
@jimmytheriot8978 4 жыл бұрын
I switched from R9m to crossfire micro , i had to many problems with the R9m , crossfire is awesome , been out 5miles with 99% signal had to turn aroud because of battery , lol
@prudensky
@prudensky 4 жыл бұрын
R9m like good power....
@jimmytheriot8978
@jimmytheriot8978 4 жыл бұрын
@@prudensky i had it on the highest setting , updated firmware, still problem, I love that the crossfire receiver can be updated wirelessly
@Dominik-pv4dl
@Dominik-pv4dl 4 жыл бұрын
Hi Andrew 🤗, another great review video from you - keep it up! I have been a big fan of your KZbin channel for many years. I am currently preparing myself for my return to model flying and I am currently very unsure which transmitter I should buy best. In the past, like you, I had the QX7 with OpenTX and was always very satisfied. Unfortunately, I decided at the time to sell these, as well as all of my other equipment 🙈. So I have to buy now everything again 😅. This mistake will not happen to me a second time 😉! However, a lot is currently happening on the transmitter market. Both the Jumper T16 and the Radiomaster TX16S have become real bestsellers due to their price-performance ratio (multi-module, color display, etc.). The Jumper T18 will soon be launched in several versions, which will no longer have the "shortcomings" that the Jumper T16 and the Radiomaster TX16S currently have. In other words, it has better switches, has a 5 instead of "only" a 4-in-1 module etc. However, and that is the issue that is currently causing me a headache when I make my purchase decision, what about future security? FrSky relies on their new ACCESS with their transmitters and future receivers and no longer on ACCST. In comparison to ACCST, ACCESS offers some new and interesting or innovative features (24 channels, etc.). But this is exactly where the big “problem” lies, because neither Jumpers nor radiomasters support ACCESS. That would mean that you can still use the current / "old" ACCST-receivers from FrSky, but not all future ACCESS-receivers !? In other words, if you choose a Jumper T16, Jumper T18 or a Radiomaster TX16S transmitter, you have a very good transmitter, but you also decide for a future without FrSky! I would be very interested in your opinion! Which transmitter would you advise under these aspects and why? Thank you very much for your feedback! All the best to you and your family and stay healthy! Ps: And of course many many wonderful flight hours & KZbin videos!
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Thanks Dominik. All my receivers are FrSKY ACCST. Cant beat the cost, range and telemetry. I'll use the TX16S as my daily but keep a Taranis for future ACCESS receivers if necessary.
@KenKneknaneek
@KenKneknaneek 4 жыл бұрын
Nice demo as usual, almost the same as my new jumper TX-18 s. Still need to find how to assign 2 and 3 position switches, and how to use the mix and set up 2 and 3 functions to these switches. Still trying to figure this out. The words channel, mode, receiver number, inputs and mixes get confusing. lol probably just old age. Looking forward to your video of an actual step by step assigning modes to switches, how you know what channels to use, and to see the switches actually work and how you assigned them. Happy Flying
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Painless360 shows how kzbin.info/www/bejne/p36wp5iVjNufa9k
@KenKneknaneek
@KenKneknaneek 4 жыл бұрын
@@AndrewNewton Thanks Andrew that vid was very helpful. As per your video i think i have set up my xk A800 mini glider. I set the two switches as you suggested and I see movement on them now yeah!!! I put my throttle cut on a 3 position switch and label'd it thrcut so I know where it is lol.. Man there is a lot to learn on this transmitter. Now waiting for some good weather and if it is good may even record a flight for my channel. Now where did I put all that camera stuff? lol Happy Flying
@EnglishTurbines
@EnglishTurbines 4 жыл бұрын
Hi Andrew, the L9R protocol is no longer included in recent Multiprotocol Firmware...Can you confirm this?
@AndrewNewton
@AndrewNewton 4 жыл бұрын
No 67 LR12 according to the MM project. Maybe
@EnglishTurbines
@EnglishTurbines 4 жыл бұрын
@@AndrewNewton Oh, so they've decided to hide it then..?...Thanks for the info...🤔
@MasboyRC
@MasboyRC 4 жыл бұрын
So cool !! I wish i could have this one 😊
@avsaase
@avsaase 4 жыл бұрын
What are your thoughts on this transmitter a month later? How is the range compared to the FrSky transmitters? You mentioned using the six buttons as mode switched for iNav. Have you tried that out? Would free up three switches.
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Tomorrows video will answer your questions.
@tojon
@tojon 4 жыл бұрын
Hi Andrew. Is it correct that the 18650 holder only accepts button-top, and not flat-top 18650s? Were you using flat-tops in yours? I couldn't tell for sure from the video. Thanks.
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Flat tops are fine, the holder has raised + contact pads.
@R.B_B
@R.B_B 2 жыл бұрын
Nice. What board you suing in the FPV plane you using that has Return to home?
@AndrewNewton
@AndrewNewton 2 жыл бұрын
Matek F405-Wing / INAV
@jamesceastep8874
@jamesceastep8874 4 жыл бұрын
Andrew: You clearly have mastery of this radio, and I assume have a fair amount of experience with non-hobby grade receivers on beginner planes & quads. I have just purchased the Eachine P51D Mustang, F4U Corsair, and Volantex V761-1 Firstar mini planes with three 3 modes for their 6axis gyro to help my friends get into this hobby. I would very much appreciate your advice/investigation whether the multiprotocol system on this Tx can fly each of these planes instead of the original RTF transmitters. I understand that a F22 pusher jet is also now out, and appears to be fast, but tiny. AFAIK, all of these Eachine planes are made with EPP foam and nearly indestructable. I would love to see you do your quality of review on all of them. Addendum: I recently realized you did a review of the Volantex mini Firstar several years ago! Secondly, I would love your assessment whether the larger color screen of the RadioMaster TX16S is still clear to view outside in bright sunshine compared to other model's B&W LCD screens. Keep going for the gold! Jim
@AndrewNewton
@AndrewNewton 4 жыл бұрын
I assume they are all included in the multi protocol project. I'll try some soon.
@skyworx524
@skyworx524 4 жыл бұрын
Great info Andrew
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Glad you enjoyed it
@glenwhatley7366
@glenwhatley7366 4 жыл бұрын
The only thing that kept me away from this radio was the screen location. Why couldn't they put it on the top like the horus 12s. You've got this awesome screen and you cant see it because your strap is in the way.
@DadsRCHangar
@DadsRCHangar 4 жыл бұрын
Nice little radio, still love my X10 👍🏻
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Yes the X10 looks to be high quality
@DadsRCHangar
@DadsRCHangar 4 жыл бұрын
Andrew Newton I use the FRsky OS as well, seems fine. 👍🏻
@isaynotusaymy.channel1289
@isaynotusaymy.channel1289 3 жыл бұрын
Hi Andrew, nice to see the video content. I have confused due on market online have to type for this model tx16s RadioMaster. 1. Cheaper but mentioned for drone 2. Normal range prices. My inquiry and need ur advice which one the correct to purchase for this transmitter as what on this video. The link on this video not really work for me to choice due have mentioned drone as well. Hope get back from you soon.
@AndrewNewton
@AndrewNewton 3 жыл бұрын
This one is perfect for planes and quads
@petercane6376
@petercane6376 3 жыл бұрын
Andrew...thank you!!! I have bought you three coffees!!! I have ordered this Tx today. Can you please explain a bit about dlg " launch mode " whilst holding down a switch with the left hand. What is the switch configured to do please?
@AndrewNewton
@AndrewNewton 3 жыл бұрын
Peter, many thanks for the coffees! Launch switch gives momentary up elevator to rotate the DLG up from a flat throw, and a tiny bit of right rudder just to counter the left yaw from the throw. You release the switch as soon as the DLG is heading skyward.
@petercane6376
@petercane6376 3 жыл бұрын
@@AndrewNewton Thanks Andrew. When my new tranny arrives ( hee hee) I will have fun learning how to mix that in. I will watch all your vids. Just finished watching your Eachine Seal fpving along the coast. Awesome!!! Cheeers
@duschiavon
@duschiavon 4 жыл бұрын
Finally!!!! A freaking review of the T16 been used on a airplane. I’m sure you are the ONLY guy doing a review using a airplane instead quads, racing quads, fpv quads, quads, quads, quads.....!!!!!¡¡¡¡ I bought one and still waiting to arrive it. Any thoughts on using this radio on giant scale aerobatic gas planes? Much appreciated
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Excellent, I think this is more of a fixed wing radio anyway
@duschiavon
@duschiavon 4 жыл бұрын
@@AndrewNewton you are the man! Can you do some more videos with planes, but at this time, binding it to Spektrum receivers? Thanks again Eduardo
@roquelopez3507
@roquelopez3507 4 жыл бұрын
Hi good morning andrew, is the X8R recceiver with the radiomaster t16s transmitter can it compete the taranis with the range
@AndrewNewton
@AndrewNewton 4 жыл бұрын
I haven't tested range but I would rather trust FrSKY for FrSKY receivers
@rccosplay3249
@rccosplay3249 4 жыл бұрын
I've been using Futaba for many years now without a glitch. I'd be interested in one of these to try it out as It's quite cheap in price compared to Futaba radios. What protocol do they use, Can it do Fasstest with telemetry? As I wouldn't trust anything else especially with my very expensive turbine jets.
@christopherstarzyk9209
@christopherstarzyk9209 4 жыл бұрын
Its multi protocol but from what I read it only works with FAST, which I think is the older Futaba protocol
@AndrewNewton
@AndrewNewton 4 жыл бұрын
I wouldn't be messing around with multi protocol modules on your jets. Stick with what works.
@5lexicon
@5lexicon 4 жыл бұрын
I would definitely stick with Futaba.
@ceziukozak
@ceziukozak 4 жыл бұрын
Jumper t16, radiomaster etc... Would i swap my qx7 with Hall gimballs and R9 module for one of those ? Nope. Screen that sucks juice, and not visible with lanyard, bigger and probably heavier too...
@typxxilps
@typxxilps 4 жыл бұрын
cannot agree , sold my taranis x9d and jumper t16s Pro and the radiomater feels good and safe like no ribbon cable ... It is perfectly balanced if you hook it to the lanyard No need to complain
@_ElectraAhmedShahriarSamad
@_ElectraAhmedShahriarSamad 4 жыл бұрын
Andrew why didn't you buy Jumper t16?? They are quite familiar ??
@AndrewNewton
@AndrewNewton 4 жыл бұрын
This was given to me for the review. I wasn't actually after a new radio.
@_ElectraAhmedShahriarSamad
@_ElectraAhmedShahriarSamad 4 жыл бұрын
@@AndrewNewton That's good.
4 жыл бұрын
How did you manage to get one Andrew? Was one sent for review only? I've ordered one monrth ago one from Banggood, but it stills says on Pre-Order :(
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Hobby Porter asked if I would like to review it. This is a pre release version
@victorsoepboer2618
@victorsoepboer2618 3 жыл бұрын
Hi Andrew, do you know if you can connect the radiomaster tx-16s with a turnigy tgy-i10 for trainer mode?
@AndrewNewton
@AndrewNewton 3 жыл бұрын
Dont know sorry
@shiftx1579
@shiftx1579 4 жыл бұрын
How's the radio going for you? Do you find the voice telementry is loud enough,thinking of getting one.
@AndrewNewton
@AndrewNewton 4 жыл бұрын
No problem with audio level. It's a decent radio, but I still prefer Taranis QX7
@muhammadqaisarali
@muhammadqaisarali 3 жыл бұрын
@@AndrewNewton hi Andrew, hope you will be fine. Thank you for amazing reviews.. I already had used QX7, but then sold.. no I want to buy again.. I felt my interest in Radiomaster, but don't know how it will go.. I would highly appreciate your opinion in this regard.. Best Regards
@tojon
@tojon 4 жыл бұрын
Hi Andrew, newbie question. Have you successfully connected the radio to a SIM via the supplied USB-C cable?
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Haven't tried yet. Dont have a suitable SIM at the moment
@JohnAllenTekHead
@JohnAllenTekHead 4 жыл бұрын
I’ve used the mono trainer port, no problem
@tojon
@tojon 4 жыл бұрын
@@JohnAllenTekHead awesome, thank you sirs.
@jordanfstop
@jordanfstop 4 жыл бұрын
Have you run into any problems without having an actual "bind" button? For example with enabling "SAFE"/GPS mode on some, you hold bind, press flight mode three times. I'm just wondering how this would happen in this (during the menu binding process?)
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Not yet. No problem binding FlySky receivers to th TX16S. Flysky FS-i6 radio has a bind button
@EldarKinSlayer
@EldarKinSlayer 4 жыл бұрын
I have a Jumper T18 on pre order with the Fr 9 on the internal multi module.
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Killer feature. The competition is good.
@EldarKinSlayer
@EldarKinSlayer 4 жыл бұрын
@@AndrewNewton Competition is great!
@omeresawi266
@omeresawi266 4 жыл бұрын
Good job Mr Newton your allows to given good idea thanks for that . Your from were Mr Newton .
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Hello from Australia
@dronexfun8469
@dronexfun8469 4 жыл бұрын
I had to order one as soon as I saw the relatively low price.
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Yes, great value for money
@johnsheehy6172
@johnsheehy6172 4 жыл бұрын
Can you tell me if the team black sheep micro module means all I need is a TBS receiver?
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Not an expert but I think yes that is all you would need.
@johnsheehy6172
@johnsheehy6172 4 жыл бұрын
@@AndrewNewton many thanks Andrew.
@jview70
@jview70 4 жыл бұрын
Hi andrew. Do you know if the radiomaster is compatible with the frsky grx8 in terms of telemtry. Will it beep for lift and give me altitude information?
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Yes, that's what I used in this video on the Phoenix
@jview70
@jview70 4 жыл бұрын
@@AndrewNewton thank you
@jonrooster9843
@jonrooster9843 4 жыл бұрын
Is R9m menu already present inside or do we need to update certain firmware to make it available. Tq
@AndrewNewton
@AndrewNewton 4 жыл бұрын
R9 menu appears when you select it in the External Module list. No update required
@jonrooster9843
@jonrooster9843 4 жыл бұрын
@@AndrewNewton glad to hear that. Thz Sir Andrew.
@tureberrapeterson1982
@tureberrapeterson1982 3 жыл бұрын
Can we use Turnigy 9X 2.4GHz 8Ch Receiver (V2) and HobbyKing 2.4Ghz Receiver 6Ch V2 for the TX16S Hall.....?
@AndrewNewton
@AndrewNewton 3 жыл бұрын
Yes Flysky protocol
@Aeromodelismo_Facil
@Aeromodelismo_Facil 4 жыл бұрын
Andrew teacher! I'm about to buy a Radiomaster Tx-16S to replace my dear Flysky. Do I need to buy the long-range module to fly wings and airplanes? Sincerely from the Canary Islands!
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Hello to the Canaries! Only if you want to do long range, like more than 3km
@Aeromodelismo_Facil
@Aeromodelismo_Facil 4 жыл бұрын
@@AndrewNewton I have doubts when making the purchase of the station. I have seen that there are two models of radiomaster TX16S and I don't know which one to buy. Basic or hall? Which one do you recommend? Kind regards from the Canary Islands
@Aeromodelismo_Facil
@Aeromodelismo_Facil 4 жыл бұрын
@@AndrewNewton Thank you very much
@AndrewNewton
@AndrewNewton 4 жыл бұрын
They are both good. Nothing wrong with the basic
@marhar2
@marhar2 4 жыл бұрын
Nice looking! How many model slots does it have?
@AndrewNewton
@AndrewNewton 4 жыл бұрын
I'll ask Hobby Porter and report back. Not mentioned anywhere
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Unlimited models because they are saved on the SD card.
@JohnAllenTekHead
@JohnAllenTekHead 4 жыл бұрын
The effective limit is 60
@bobzittlow7134
@bobzittlow7134 4 жыл бұрын
Hope you can help me. I have jumper t16 pro v2 setup to kopilot I'm using mode 2 AETR. The motor will only start when over half way up on throttle. any suggestions? I do watch most of your videos
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Hi Bob, that's odd behaviour. Try calibrating the transmitter sticks then the ESC
@grumpyjohntxredneckrc6346
@grumpyjohntxredneckrc6346 4 жыл бұрын
Hey You Beat Bruce Simpson Out On This Review!!! LOL Thanks PS What Do You Think The Best + Cheap Telemetry RX W/Vario+ ???
@minuteman4394
@minuteman4394 4 жыл бұрын
XJet is waiting to do the Jumper 18 and this set as a comparison
@AndrewNewton
@AndrewNewton 4 жыл бұрын
G-RX8 if you shop around
@FLYWDRAGHIL
@FLYWDRAGHIL 3 жыл бұрын
Which radio is better x9d+ or t16s radiomaster??
@AndrewNewton
@AndrewNewton 3 жыл бұрын
I prefer the X9D+ but I dont need the multi protocol and big screen
@01VIPER27
@01VIPER27 4 жыл бұрын
Can I just plug in my SD card from my Taranis into this and bind to each model or do I have to re-create all models into this?
@AndrewNewton
@AndrewNewton 4 жыл бұрын
No, Taranis SD card is not recognised. You can convert models from Taranis to TX16S using Companion (when 2.3.8 is released) but switches and mixes may not be identical.
@01VIPER27
@01VIPER27 4 жыл бұрын
Andrew Newton thank you sir.
@prudensky
@prudensky 4 жыл бұрын
What the amazing fonts in OSD?
@AndrewNewton
@AndrewNewton 4 жыл бұрын
I think it's Impact
@prudensky
@prudensky 4 жыл бұрын
@@AndrewNewton Thank you, Andrew!
@spitfeueranna
@spitfeueranna 4 жыл бұрын
Can't get mine to bind to any of my toys.
@seancollins5769
@seancollins5769 4 жыл бұрын
How are they making money on this transmitter?! It seems so nice! Time to ditch my spektrum DX7s
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Temporary price war maybe?
@robertlow9287
@robertlow9287 Жыл бұрын
Touchscreen, EdgeTX
@peterp.3530
@peterp.3530 3 жыл бұрын
Hi. I need telemetry, does it have it ?
@AndrewNewton
@AndrewNewton 3 жыл бұрын
Yes
@peterp.3530
@peterp.3530 3 жыл бұрын
@@AndrewNewton Thank you Andrew Best regards
@nostrfodamus
@nostrfodamus 4 жыл бұрын
Hi andrew, i hope you’re doing great. I have two questions. Can anyone tell me why, i’m getting rf signal critical warnings after only 30 meters in the air with my radiomaster t16s? I am using dsmx protocol. Also, anyone can tell me how to setup, using flaps as ailerons in sync with the ailerons. Thanks
@AndrewNewton
@AndrewNewton 4 жыл бұрын
I am doing well thanks. Might be broken receiver or radio antenna. Should be getting way more that that. Search for my Full House setup video
@EnglishTurbines
@EnglishTurbines 4 жыл бұрын
Turn off telemetry, that Spectrum RX has none?
@nostrfodamus
@nostrfodamus 3 жыл бұрын
@@AndrewNewton dear andrew thank you for your amazing videos. I figured it out , you need just to disable telemetry warnings with dms receivers. Do you have a website where i can correspond with you directly?
@muttbone01
@muttbone01 4 жыл бұрын
Rebranded Jumper T16?
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Parallel design, they started together then Jumper and RadioMaster split to follow different development directions
@TakeItToTheGround
@TakeItToTheGround 4 жыл бұрын
All these radios are great for future reference but my QX7 just keeps working & working & working.
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Yep, great simple radio.
@samavella8831
@samavella8831 4 жыл бұрын
Hi, Great video and review. I purchased myself a TX16S with the crossfire module and should be shipping in a few days. I’m very interested in the custom sliders. I don’t have a 3D printer and was wondering if I pay you for them, would you be willing to print me s pair and mail them to me? Thanks.
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Sorry Sam but I'm avoiding the Post Office for a while. Thingiverse has a Print this option or you can find a local print service.
@samavella8831
@samavella8831 4 жыл бұрын
Andrew Newton Understood and thanks anyways!
@samavella8831
@samavella8831 4 жыл бұрын
Andrew Newton Hi Andrew, I don’t see the “Print this” option on the Thingiverse link that you provided for the Slider mods!
@stevefox3763
@stevefox3763 4 жыл бұрын
Your R9M antenna is mounted wrong, it should be vertical and not horizontal.
@waldemarkraus2855
@waldemarkraus2855 4 жыл бұрын
It depends on the position of the antenna on your aircraft. If it's vertically on the aircraft, it should also be vertically on the radio. There's no "right or wrong" position
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Vertical and horizontal on the plane, but yes vertical on the radio would be more appropriate for long range.
@stevefox3763
@stevefox3763 4 жыл бұрын
@@AndrewNewton vertical and horizontal on the plane is the right way but on the Tx it should be vertical, horizontal focuses a significant portion of the radiation towards the ground. Having it horizontal is essentially the same as putting the 2.4ghz dipole on the tx horizontal, something nobody would ever do but most don't realise the polarisation of the super 8 antenna on the R9M.
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Thanks Steve
@heggy_fpv
@heggy_fpv 4 жыл бұрын
how is it for pinchers?
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Dont know any pinchers.
@alexanderk6546
@alexanderk6546 4 жыл бұрын
how far can you fly on your own radio module?
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Do you mean the internal multi module?
@alexanderk6546
@alexanderk6546 4 жыл бұрын
@@AndrewNewton yes, multi module
@AndrewNewton
@AndrewNewton 4 жыл бұрын
I'm guessing >1.5k but have not tested
@craigmunday3707
@craigmunday3707 4 жыл бұрын
Seems like the strap obscures the screen
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Yes it does
@typxxilps
@typxxilps 4 жыл бұрын
8% for this rc transmitter for all banggood friends of coupons 12$ "pArts8" ordered m first a few weeks ago - and now the second one after the strong influencer marketing appeared all over yt and the "named badges" usb charging works out of the box and RC Sim too at least under Windows 10 the radiomaster is really balanced hooked to the laneyard
@omeresawi266
@omeresawi266 4 жыл бұрын
I'm blaning to build first grub RC in Sudan I went from u to help me . My tcher . Do you have myne . Omer esawi from Sudan
@marcobuonavita2757
@marcobuonavita2757 4 жыл бұрын
How do mode 2 to mode1 pleas tank yuo
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Choose in the menu, then open the back and swap the throttle spring and rocker lever to the other gimbal
@marcobuonavita2757
@marcobuonavita2757 4 жыл бұрын
@@AndrewNewton Tank you , from Italy
@siddharth4662
@siddharth4662 4 жыл бұрын
are you guys not having a lockdown in Australia?
@AndrewNewton
@AndrewNewton 4 жыл бұрын
Restrictions eased at the start of this week.
@hakaiyou4532
@hakaiyou4532 4 жыл бұрын
R9 sucks...
RadioMaster TX16S  is here. Jumper T16 is done.
19:52
Joshua Bardwell
Рет қаралды 139 М.
RadioMaster TX16S Review & Thoughts
23:41
John Salt
Рет қаралды 23 М.
Хасанның өзі эфирге шықты! “Қылмыстық топқа қатысым жоқ” дейді. Талғарда не болды? Халық сене ме?
09:25
Демократиялы Қазақстан / Демократический Казахстан
Рет қаралды 357 М.
Osman Kalyoncu Sonu Üzücü Saddest Videos Dream Engine 269 #shorts
00:26
RadioMaster TX16S Mark II
12:40
Andrew Newton
Рет қаралды 8 М.
RadioMaster TX16S  2.4G 16CH Multi-protocol OpenTX Transmitter
25:37
RADIOMASTER  TX16S - EVERYTHING YOU NEED TO KNOW
25:52
UAVfutures
Рет қаралды 93 М.
RadioMaster TX16s Radio: Your questions answered!
15:17
Painless360
Рет қаралды 51 М.
TopRC / PrimeRC T1400 mods
9:01
Andrew Newton
Рет қаралды 3 М.
Radiomaster TX16S - Flight - Overview - Setup
22:38
AndyRC
Рет қаралды 90 М.
Radiomaster TX16S RC OpenTX Transmitter Review 📡
17:18
Albert Kim
Рет қаралды 25 М.
RadioMaster TX16S // Multi-Protocol // Protocol Freedom
13:12
Nick Burns
Рет қаралды 9 М.
Хасанның өзі эфирге шықты! “Қылмыстық топқа қатысым жоқ” дейді. Талғарда не болды? Халық сене ме?
09:25
Демократиялы Қазақстан / Демократический Казахстан
Рет қаралды 357 М.