RAM 1500 Lowering Kit INSTALL - REAR Suspension 2009-2018

[@BoostedMotorsports]

**Click HERE for the same lowering kit** amzn.to/36tHjwV

[@rexjace7938]

I realize I'm kind of randomly asking but do anybody know of a good website to watch newly released series online ?

[@zacharycohen183]

@Rex Jace I watch on flixzone. Just google for it :)

[@alijahcurtis9059]

@Rex Jace I watch on Flixzone. You can find it on google =)

[@jzgarage1832]

I'm actually thinking about buying this kit. This channel for me is the go to channel for RAM informational videos

[@BoostedMotorsports]

Thanks for the support! Hopefully moving on to a new project in the next few months just want to finish what we started 🤘

[@jzgarage1832]

Right

[@jzgarage1832]

I had a question if you know of any 5 spoke wheels that would be great on the RAMs

[@BoostedMotorsports]

Lots of options for sure. If you are looking for speed a lot of guys run Race Star wheels

[@jzgarage1832]

Okay thanks a lot!

[@justinclaypool007]

Late to the party here, but I've been looking for mods for my 2WD 2019 Ram 1500, and the lowering kit needs to happen. Well done!

[@travisburleson5052]

If you use this kit, do you have to replace the shocks with shorter ones or can you keep the stock ones?

[@MrFullforcesound]

I have the Belltech 2/4 kit With a quad cab Ram1500, On my kit it came with a "Cross member Notch plate" which is meant to add additional travel clearance for the single driveshaft found on the 140" wheelbase Rams. Did you need to install this cross member plate for additional clearance with your driveshaft?

[@shirocp]

I love the stance and the lowering kit. Those 24’s look dope! Do you know if Belltech makes any for 2022 Ram 1500 5.7L Hemi Crew Cab, 5-7 bed? Thanks in advance!

[@XtremeScratchers]

Your Going to love the handling my truck rides like a car, i tend to forget im driving a truck.. Looks Good Mine was done when purchased with factory lowering kit back in 2002, never seen one as low as mine with 18" wheels with cooper plus 285 65 r18 tires, that's the widest tire that can be put on without anything rubbing, ill take a picture and show it on here if I can

[@dwoodward9443]

Damn that looks good! I definitely wouldn't recommend going any lower for a street driven truck. That's usually when it starts riding like garbage and/or when you have to spend big bucks to correct your ride quality.

[@BoostedMotorsports]

Yeah this is low enough for me on a truck!

[@brandosantana3892]

Dusten Woodward I ride 5/7 everywhere and it’s fine. Rides better than stock when you c notch, get the right shocks, extenders and quality parts. Don’t be wary of riding low boys

[@TCG_Jay]

Any recommendations on the socks I got a 6/12 drop

[@GutierrezAngel95]

Looks great what was the wheel set up on this ?

[@moparandmoremopar8113]

Question do i need shorter end links? Or is it optional

[@sotopr7]

How is the ride i want to do it to my ram but wondering is is gona be bumpy

[@derekmichael5710]

thanks for the video! I did not lower but put in heavy duty springs for pulling a travel trailer. Same process

[@BoostedMotorsports]

Thanks Derek! I was thinking of making a separate video on just the spring change portion too! 👍😎

[@RM-kh1jj]

Derek Michael Did you have to take the wheels off just to change out the springs? Or same process

[@MrFullforcesound]

I have a 2014 and would like to go with a 2/4 drop as well. I have 22” wheels and I tow my trailer pretty often 1-3 times a month. With a 2/4 drop will I need to c-notch the frame to allow clearance?

[@chrisgarcia5684]

Hey I was just wondering how do you get the bolts off of your shocks

[@reyyvasquez9116]

Do I have replays the stock shocks ?

[@williammayes2402]

Love the stance on ur truck were get the tires were did u getvthe tires

[@leovaimasanuu8514]

How many hours did you work on your truck ? pls , asking for friend . Thanks

[@PyrosPelagics]

Love it! Good to see youre still holding onto the truck!

[@BoostedMotorsports]

Thanks! Keeping it for now until we achieve the goal we set out to do! 👍👍👍

[@bobbycarmichael2562]

Love your videos bro. You gotta tell me which model and size those F1's are. I tried looking them up and there seems to be a lot of different options. When I type in my 2011 ram 2wd one come up. I was about to buy a new set of tires this weekend. I'm so glad I saw this video cause the tires are wicked bro !

[@karinaguardado9679]

anyone know the name of the bracket on 13:40 and know where i can get it ! TIA!

[@brendonlandon9489]

What length shock did you use to get rid of bounce

[@BoostedMotorsports]

I used these shocks! Worked great 👍 amzn.to/2Q8nUJo

[@brandonpluma917]

What setting did you end up setting your QA1-TS905 shocks to get rid of shake

[@sean941]

What did you use to grip that back nut on the upper shock? A socket won't fit

[@BoostedMotorsports]

You need to hack up a wrench or I've used a mini adjustable before

[@jaughnmorris9188]

I bought a 21mm wrench just for this, heated it up right behind the open end and bent it 90 degrees, fits right back there and not a pain anymore.

[@fabianaguilar1099]

The lowering kit you have listed on the Amazon link is for a single cab only. Not for dodge Ram quad cab.

[@jmoak311]

For the 2-4 drop do you have replace front shocks?

[@juniorcastillo95]

Do you only need one track bar bracket?

[@johnsimpson2690]

What position do rear springs sit? When i pulled old ones they got turned by my son so not sure i have installed properly. They kind of bulge alittle.

[@phillipmweedon]

Did you ever install the shorter sway bar end links?

[@cowboyup1338]

Do you need to get shocks

[@lewizvlogz911]

This is a 2-4” dropped?

[@alfonsomartinez1732]

Hey man I need your expertise do you think a 22x12 rim on street tires rub???

[@octaviochavez4475]

Hey bro I am having a trouble I just bought a 2013 single cab ram and when I hit 70 it starts to bounce left and right on uneven surfaces

[@georgebailey6307]

no pics of it sitting outside in the driveway so we can see it better?

[@itzmillertyme]

do your stock coils have different part #'s since one in shorter?

[@robdemers9303]

what is the wheel and tire specs.looks good want to get some

[@BoostedMotorsports]

The specs for the wheels are in another vid but they are 24s 🤙😎

[@jasontucker1928]

My 2016 ram doesnt sit level but does sit on the bump stop

[@raulsanchez3288]

were can i buy the 2 front 4 rear lowering kit?

[@thebomberThebomber-yy2th]

Cant you just use a spring compressor tool ? To remove springs

[@radiouniquefm]

Is this kit good for the 2018 crew cab 4x4

[@carlospacheco5495]

Where can I get the suspension to lower it 2 inches i have a ram 1500 2018

[@mechanicaldave7981]

What’s the part number on the rear shocks?

[@ericruvalcaba933]

The Ram look effing badass!!! I have a 2018 Hydro Blue Edition that comes with stock 22" RT wheels. How did you fix the rear tire gapping issue on the rear axle after installing the Belltech kit? The rear axle rotates a little bit forward causing less gap toward the front of the tire and wider gap toward the rear.

[@BoostedMotorsports]

THanks Eric! I have illicet "no cut" relocation brackets sitting here on standby to correct that but honestly so far I don't think its needed unless that gap bothers you to look at. It isn't too noticeable in my opinion. I'll update everyone on a video tonight or tmw 👍

[@ericruvalcaba933]

@@BoostedMotorsports Thanks for the update!

[@bryanleonard8008]

pretty sure I am going to buy this kit! And more than likely install it myself!

[@BoostedMotorsports]

Hell yeah! Its pretty straight forward! 😎

[@bryanleonard8008]

@@BoostedMotorsports I am reading about the rear bump issue and it seems it is to do more with the angle of the track bar. People are saying that correcting the angle made the rear stable... Wonder if you have any input...

[@nick06tc]

Do you have to worry about brake lines or anything during install?!

[@jordonjohnson4953]

Where do I get the track bar bracket at

[@mechanicaldave7981]

Anyone know of a better shock than that’s belltech streets or nitro?

[@silence3314]

How’s the ride? I would assume it’s not as good as factory but is it really bad or no?

[@marcelofergueson3009]

My guy!! What kind of tires/rims are those?

[@Joel83M]

I have the 3" maxtrac rear drop springs and shocks, I'm wondering if I'll be able to tow my 4000lb impala around for car meets. I usually swap back to stock to tow it but would rather keep the drop kit, any suggestions?

[@billytweed1924]

When i had the bell tech kit on my ram i could still tow the max the truck could safely handle. I did put a pallet of concrete in the bed, 3600# and it was bottomed out but then again the truck was not supposed to carry that much weight in the bed. I did however tow a tractor and tandem wheel trailer to complete some of jobs. I would say you can tow a car and be safe with this lowering kit.

[@joefurrer5428]

On your 3 inch rear drop do you have any wobble or Driveline issues and left it all stock except for 3 inch lowering springs like to know. With a 2 and 3 in I was told you can leave the stock shocks in.

[@Joel83M]

@@joefurrer5428 I installed the 3 inch drop maxtrac shocks with them, stock shocks were stiff to me

[@joefurrer5428]

@@Joel83M so there is no wobble on speeds over 70 80 90 miles an hour it handles very well ? I'm running 285 55 20s all the way around. I guess better shock in the back .

[@Joel83M]

@@joefurrer5428 right now I have the mcgaughey (if I spelled it right) 2" rear drop springs on my truck with the stock shocks and it rides really good, no wobble at 70-100mph. I still have my 3" drop coils also and planning on putting those back on with the airlift 1000 helper bags for dropped trucks. I have helper bags on there now but it's for stock height, had them on with the 3" coils had me bouncing everywhere lol. I run a lawn business so that's one reason I have the bags for towing but when i would tow my car i would put the stock springs back on. My issue is that I'm trying to avoid swapping back and forth so I'm gonna install my 3" and see if the air lift bags would help reduce the squat when i tow my car. Even at 70-100mph with the 3" no wobble.

[@alfonsomartinez1732]

Do you have any rubbing in the front?? When you turn?

[@BoostedMotorsports]

A tiny bit at full lock with the 24s

[@derekdauzat]

i just want 2" rear drop.. is it ok to just do the rear or will that cause premature wear on the front?

[@calvinelliott9087]

Wanting to lower the rear of mine 2" is what lead me here. Lol

[@ryanverbeek1814]

maxtracstore.com/2009-2018-ram-1500-2wd-4wd-2-rear-lowering-coils-rear-leveling-kit-272920/

[@wicked59rt]

Looking good! Just curious though, did your kit come with the shorter rear sway bar end links? I know you bought it used but i'm fairly sure it was suppose to come with those.

[@BoostedMotorsports]

Mine didn't I know some people change them but mine are still stock.

[@kevincastro9588]

New here ! I want to know if this would fit my ram 2011 quad cab this drop looks dope !

[@MrRobbob33]

Did you have to get an alignment?

[@BoostedMotorsports]

Definitely a good idea but haven’t yet and still drives pretty straight

[@g.hernandez7803]

I would totally pay you to do this to my truck.

[@BoostedMotorsports]

If you're local contact us on instagram @BoostedMotorsports

[@JoseTorres-bg1fy]

Do you know where I can buy this kit from? Can you comment the link

[@2low4u]

Hey what wheels are those? Size wise

[@brandonpluma917]

What model shocks did you end up going with I bought some QA1 shocks for the rear but they are too short and the original bolts won’t fit through them

[@BoostedMotorsports]

Which model did you get maybe they will work on my Dakota. I got the TS905 I believe it was for this truck

[@brandonpluma917]

@@BoostedMotorsports I already sent them back but they were the QA1 (TS504)

[@ARoss83]

Which one do I need TS504 or TS905

[@Jack-bj4jw]

That wrench rung like a bell son 😂

[@MoparHollics]

Those belltech rear springs look totally different than what I got mine had more turnes

[@BoostedMotorsports]

Hmm im not sure? 🤷‍♂️

[@humbertomoreno5460]

What size is that tire n wheel

[@luigee2626]

Will the kit fit the new gen 2019?

[@BoostedMotorsports]

I think they changed the suspension but I haven't confirmed yet!

[@adrianchavez7863]

No, 09-18 is the same suspension, 2019-now has a different suspension unfortunately

[@richardgonzalez7199]

Could you pass me the code of this lowering kit please

[@jeffstrauser4520]

I just bought a 2015 single cab for 19k. So should I be worried about lowering it?

[@leeford1045]

What size tires thanks

[@BoostedMotorsports]

Hey Lee these are 24s on the truck similar to these amzn.to/2X98k7e

[@huntersmith8878]

Proly would work for 4 wheel drive too

[@Ramklazz]

I know this might sound stupid but I can’t figure out where to put the jack stands. I tried everywhere! Could you point me to the right direction please !

[@BoostedMotorsports]

Anywhere on the steel frame infront of the control arms. I ended up going right infront of where the control arm bolts to the frame. You have to let the back axle hang for this 👍

[@Ramklazz]

BoostedMotorsports thank you! I’m gonna give this another shot before I pay someone to do it for me!

[@Pilot_the_Dune]

6:57 Either someone is doing a burnout or there is a demon just off camera.

[@villeracing5087]

Are those 20 or 22s?

[@rosiojimenez8830]

Does it work on a 4x4

[@richardgonzalez7199]

Good video

[@russogc48]

Looks great. Much better.

[@BoostedMotorsports]

Thanks Lewis! 😎

[@willholmes275]

What size rims

[@y2kredbr]

Looks good. Have you had it aligned yet?

[@BoostedMotorsports]

Thanks! Not just yet cause we still have some other parts to install but it drives straight and tracks good still!

[@thaitrungkien]

Thank you for the video. Look pretty good

[@BoostedMotorsports]

Thanks! 😎👍

[@barrybebenek8691]

Looks good brother. Nice work. 👍🏼🇨🇦

[@BoostedMotorsports]

Thanks Barry I appreciate it!

[@359alex]

Great work

[@BoostedMotorsports]

Thanks!!! 👍

[@peterjoseph1851]

It sure looks like a lot of work making the videos. One thing for sure your good at it.l like the look.

[@BoostedMotorsports]

Thanks Peter!!! 🤘😎

[@joshmaddox5682]

Thanks this video helped me.

[@BoostedMotorsports]

Thanks Josh! 👍👍👍

[@drawspixels970]

Where did you buy the kit?

[@BoostedMotorsports]

Got it used off craigslist 👍

[@rensoestrada8144]

I want to do this to my truck but mine is a 4x4 😩

[@joefurrer5428]

If I would go with a 3in rear drop would I still have the wobble after a hundred miles an hour or is that just for the 4in and lower do you know. Some do a 2in drop in the rear that would not have the wobble at 100 miles an hour and up what's your thoughts on that. I'd like to go with a 3 inch drop keep stock shocks instead of 4 in.

[@BoostedMotorsports]

Some trucks actually wobble stock and there really isn't too much info out there. Mine gets a little wobbly at higher speed. Whats odd is this ride height could also be achieved with a heavy load on the truck so I do wonder how stable the truck would be with a heavy trailer load.

[@joefurrer5428]

@@BoostedMotorsports thanks for your input on eBay there are two 3 + 4 drop coil springs for sale I was just wondering I have a 2 wheel drive regular cab with the trailer towing package on it heavy duty all the way around Hemi 392 gears 8-speed it has the trailer towing package on it so I was wondering about dropping it cuz it sits too high in the back unloaded. Might try the 3in coils in back they're only a hundred bucks on eBay. 😀

[@NicholasTXTV]

Look good man

[@bikerinme550]

This looks awesome! The wheels fill out the wells really nice. What's your best guess at how long this instillation will take? As always, thanks for your videos. I, personally, think your install videos for the RAM 1500 are the best on KZbin and have helped me decide to do several mods myself.

[@BoostedMotorsports]

Thanks for the support on the channel I really do appreciate it! Honestly if you are doing it alone for the first time on the floor and not trying to beat the clock I would set aside a half a day. You could pull it off in a few hours if you are quick though for sure.

[@jaimezapien4897]

Bro do u have sponsorship , on all jobs u do ,or is it out of pocket

[@robyde]

Good job. Get some lights

[@granmachuca]

Sad you let go that beauty

[@willevans6032]

You'll need an alignment. Camber is a bitch on our rams though. I wish you luck

[@BoostedMotorsports]

Yeah once things settle in we will definitely get an alignment! Few other goodies to install first though 😎

[@willevans6032]

@@BoostedMotorsports hey invest in some offset ball joints and some camber bolts for UCA's. The only camber/caster adjustment we have on our trucks is on crossmember to the LCA.

[@willevans6032]

Cant wait to see what's to come of your truck

[@BoostedMotorsports]

I'm probably going to keep the negative camber just in case I hit a big bump. I know it will wear the tires quicker but with these wheels the front fenders will get destroyed if I 0 out the camber and hit a big bump.

[@bubberrand]

Er...I would pay a shop to do this shit. I drive, not wrench.

[@robdemers9303]

New the diameter need the offset

[@1957kwick]

Rear tires out to far from body. In my opinion.

[@shirocp]

I love the stance and the lowering kit. Those 24’s look dope! Do you know if Belltech makes any for 2022 Ram 1500 5.7L Hemi Crew Cab, 5-7 bed? Thanks in advance!

[@JuanFlores-sb2dk]

What kinda rims and tires are those