Range Report: Diamondback DB-15 (Sometimes you get what you pay for)

In this Range Report I review the DB-15 rifle from Diamondback Firearms. This is an affordable entry level carbine that has a spotty reputation but offers many users familiar options with standard AR-15s. This firearm seems to have a few issues with it and I discover them as I get it to the range. This video documents my person thoughts, opinions and experiences with this rifle. Yours may vary.
-----
Ways to follow me and contact me -
KZbin -
The Texas Gun Vault: / @thetexasgunvault
The Texas Gun Vault 2: / @thetexasgunvault2
Rumble -
Texas Gun Vault: rumble.com/c/Te...
Texas Gun Vault 2: rumble.com/c/Te...
Facebook -
Texas Gun Vault: www.facebook.c...
Texas Gun Princess: www.facebook.c...
Instagram -
Texas Gun Vault: / texas_gun_vault
Texas Gun Princess: / texas_gun_princess
Email - [e-mail]
Patreon-
/ texasgunvault
Mailing Address -
Texas Gun Vault
P.O. Box 5582
Frisco, TX 75035
------

[@thetexasgunvault]

Please support my sponsor for this video - Browne Works Inc. - They are a manufacturer of customized exotic wood grips for all your firearms. Each grip set is made to order and can be customized based on material, color, finish and even custom engraving. If there is something you want and do not see on the website, contact Mark, the owner, personally and he will do his best to make anything for your needs! browneworks.com?aff=11 Or use the discount code TGV10 to save 10% on your order. instagram.com/browne.works.inc/

[@eliancaulet]

Hello, I need your help. I am French and I have the same weapon. do you know if it is possible to extend the picatinny rail on the top where it stops without having to change the entire handguard? if you have an internet link with the part that allows you to extend the picatinny rail I am interested. thank you friends .

[@dalewells5880]

I resigned from Diamondback 3weeks ago. I was a quality technician and CMM programmer. I left on very good terms. I’m sorry for the issues you have with this rifle. I can assure you that (as of three weeks ago) the locations and diameters of the release pin holes, the safety selector switch hole and the trigger pin holes are being inspected per sample inspection of each lot of 100 lowers. The diameters are measures with calibrated pin gages and the locations are measured with a programmable height gage (Tesa Hite). This was not always the case, but it is now. The uppers are purchased and could contribute to or be the problem for the release pins. On my last day Diamondback had just machined their firs upper. It will be meticulously inspected on a Zeiss CMM and all the bugs worked out before they go into full production. They may be in production now, I don’t know. With diamondback controlling both lowers and upper, these issues will go away. As far as the hand guard goes, Diamondback has five CNC’s dedicated to machining hand guards. They mak many different designs. Some are larger. You should look up the new Obsidian model. It has the larger diameter hand guard. I want one of those. I wish I could address the over gassing issue, but I cannot. The barrels are machined in another facility that is close by. I have worked there a couple of times, but I was just filling in for the vacationing QA tech there. The triggers are purchased. Some models have far better triggers. (The “Diamond” and “Black Gold” models) In the 2.5 years I was there, the quality and mindset of the organization has made a 180 degree shift for the better. If you tested a rifle made today you would like it far better. I’m sorry for this rifle’s poor performance.

[@thetexasgunvault]

I am glad to hear they are looking to improve and I have no doubt they will be working hard in the future. This might have been a one off, but I can only share with people what I experience. I am not a professional reviewer and like to think I create content that is unbiased. I have no love or hate for any company and want them all to succeed.

[@Seabang84]

@@dalewells5880 I really appreciate this reply. It answered so many questions for me

[@pcalna3202]

@@dalewells5880 Thanks for sharing this helpful and reassuring information. It speaks a lot about the company that the QA guy left on good terms. In other words, not having to quit over being hassled by bean-counters.

[@tonymarinelli7304]

I simply don’t seethe distinction of models on the website. You mentioned 3 classifications bu5 on the website there aren’t any subcategories

[@jjohnson8977]

awsome so are the rifles date coded sounds like 5 months ago or newer some changes have been made to better the quality thanks

[@tsim4139]

My first AR was a Diamond back and I never had a problem.

[@thetexasgunvault]

I am glad to hear that.

[@justanotherday1345]

Going on 12 years and never an issue.

[@thenoobreturnz8968]

I have mine currently on layaway! ❤

[@eddienc7380]

@@thenoobreturnz8968 lol I thought I was the only one

[@davodoitdifferent]

Just bought one yesterday 😌

[@BANGAYS-ld7qo]

I've had mine for at least 10 years and it works perfectly never once failed in any way.

[@thetexasgunvault]

I am glad to hear that yours is working so well for you.

[@jjohnson8977]

awesome thanks for posting other reviews say same that the work fantastic

[@dalewells5880]

I just forwarded this and my previous comment to the Diamondback QA director and QA manager. The QA manager responded to me that the “over gassing” issue has recently been brought up to him. He suspects that it may be a barrel issue. I’m no longer there, but I suspect this will be investigated and corrected very soon. Thank you for this review, though it’s not what I want to hear. Please don’t give up on Diamondback. They are moving rapidly to being a supreme quality gun at a very good price. I like to think I had a small part of that change while I was there.

[@thetexasgunvault]

Thank you for this. I am sure there are amazing people that work there and by no means am I saying anything bad about them as people. I can only comment on the rifle example I reviewed and share what I experienced. In no way do I hate Diamondback or anyone else. I just want to share what I discover with people who may be looking at the rifle and let them make their own choices.

[@jameswagers2793]

I've owned 3 diamondbacks. 2 AR-15 and ar10. All them ran great never had an issue or any problems. My ar10 was 308 and stainless steel barrel

[@thetexasgunvault]

I am glad to hear that. I am sure there are plenty that run great.

[@JohnWilliams-pn7ft]

I'm not a brand fan boy by any means, I just want the guns to work properly. And I have to say the DB15 I have worked Perfect right out of the box. Just my 2 cents

[@thetexasgunvault]

I am gto hear that. If you are happy with it, that is all that matters.

[@jjohnson8977]

thanks that helps. agree me neither fan boy plus these guns are made in USA so that helps decision for me

[@brianreeves9404]

I won a DB15 from a VFW raffle a year and a half ago. Runs smooth for me, I even replaced my circa 2008 Bushmaster with it.

[@thetexasgunvault]

I am glad it works well for you. That is all that is important.

[@richardstoffel6585]

I have 3,000+ rds with my diamondback. Absolutely love it! ❤❤

[@thetexasgunvault]

I am glad yours works so well for you. This was just an example of one.

[@terrylacombe417]

I think you went into this test with a biased opinion, listening to others first. I own a db15, have had it for 4 years. I have never had one problem with it period! And after more than 600 rounds through the gun, would recommend it to all my buddies!

[@thetexasgunvault]

I am glad yours works well. All I can do is share my experiences with the audience.

[@msd24200]

My son and I LOVE OUR DIAMONDBACK DB15, IT HAS BEEN GREAT

[@thetexasgunvault]

I am glad it has been good for you.

[@terryscanlon56]

I purchased a DB 15 556 approximately one year ago . I have over a thousand rounds through it and no problems. I like it a lot, great rifle

[@thetexasgunvault]

I am glad to hear it is working so well for you.

[@rodneydyer351]

My DB15 runs great. Came with Magpul furniture. No over gas, no loose trigger pin and my take down pin can be done with my fingers. Added some aftermarket gear including fold-able sites and a red dot. It's awesome.

[@thetexasgunvault]

I am glad to hear that! Sounds like you made some good upgrades.

[@markthe2nd741]

I've had my DB15 for almost 4 years and it always functions perfectly. The accuracy is very good especially with heavier bullets. Never had a single jam, stovepipe or any feed issues whatsoever.

[@thetexasgunvault]

That is great to hear and I am glad yours is working so well.

[@jamesdickerson4207]

My DB15 works great. It literally eats all the ammo I put in it. Just keep it clean and take care of it. It's a great rifle.

[@thetexasgunvault]

I am glad to hear it. These issues might just be with this example as I stated in the video.

[@jamesdickerson4207]

@@thetexasgunvault thanks for the content.

[@CarnivoreAF]

I have a DB15 16” in .300 Blackout. I’ve got just over 700 rounds through it and it has been flawless.

[@thetexasgunvault]

I am glad to hear that.

[@pcalna3202]

Thx for sharing that. My friend is looking at a DB-15 in .300 BLK and I thought I would check some reviews for him. Other than this, I haven't seen much but positives. Also I thought QA Guy's feedback was pretty great.

[@cecilandrews7479]

My takedown pins were great. Fact the entire rifle runs flawlessly

[@thetexasgunvault]

I am glad to hear that!

[@591tad]

I just bought a higher end model. I hope I don’t have these issues when I get it. Definitely will look out for these things you’ve mentioned. Great video

[@thetexasgunvault]

Thank you and I hope yours runs great!

[@591tad]

@@CatchingblissActually I have an issue with it already. I’m sending it back to the manufacturer. The retainer pin is hitting buffer around the rim. I’ve heard many other people have had this same issue. Check your buffer and see if you don’t have this issue as well.

[@hondasaurusrex6998]

Nice video as always. I have a DB15, only problem was the hand guard was crooked, rather the mounting of it was crooked I think. I losened it up and retighten it still the front was off center. Didn't even bother putting on iron sights, just went straight with a red dot. Otherwise no complaints about it. Quite accurate for a "low budget" MSR. I bought it as a comparison to my PSA builds... but must say my builds are about as good or even better. But still love my DB15, because it's my. Stay safe Big Jay.

[@thetexasgunvault]

Thank you so much and I am glad to hear yours works well.

[@johnnyhurtado4292]

Crazy must be where there made at or something I have one and fires perfectly fine . Your right about the overgassing tho . Great video brother!

[@thetexasgunvault]

Thank you so much and I am glad yours works so well for you.

[@fishingwithdj2844]

My takedown pins comes out with no problem. I got two diamondbacks and they both slide out without any problems.

[@thetexasgunvault]

I am glad yours works well.

[@samellerbe9632]

I have the DB-15 burnt bronze with the quad rail and I love it not one malfunction but I’ve only put about 500 rounds thru it!! I have a holoson sight and magnifier on it and don’t plan on getting rid of it anytime soon!!

[@thetexasgunvault]

I am so happy to hear that yours runs so well!

[@leoguy1609]

Had no issues with mines. Cheap doesn't mean bad and expensive doesn't mean good. Put nearly 2000 rounds through mines with few issues. Most were ammo related and from me not cleaning it during prolong shootings. When the firearm was properly maintained and lubricated it ran flawlessly. Any issues and link to this video should be sent to Diamondback Firearms?

[@thetexasgunvault]

Thank you and your are right. But I can only show my experiences with the guns I get to review.

[@leepace1696]

Got my Db15 3 to 4 years ago and it doesn’t just sit in a safe. I put thousands of round through it and not one single issue I love it. Every company sells lemons and unfortunately you got one.

[@thetexasgunvault]

I think you might be right. I am glad yours is working well.

[@jarrettmartin4143]

I have a diamondback db-15 i got about 1000 rounds through it. Has run flawlessly i havent even cleaned it yet

[@thetexasgunvault]

I am glad to hear yours runs great. When I review a firearm I only have one example.

[@jarrettmartin4143]

@@thetexasgunvault I understand, I hope I don't have any of these issues myself

[@matthewharrison8867]

I have 4 Diamondback DB-15’s the only issue I had was the takedown pin on my 300 blackout was a little tough getting it out but other than that I love the performance, I put a fostech echo trigger in one and it’s a blast

[@thetexasgunvault]

I am glad yours have worked so well for you.

[@Kennoisewater123]

I have a Db15 DMB model. Absolutely flawless. Keeps up with my DD V7 pro all day. Never an issue. Shoots lighter than other ARs I own

[@thetexasgunvault]

I am glad yours works well for you.

[@brandhark7935]

Just bought the DB-15 in the 350 Legend. I’m excited to get it, I’m sure it will be a great gun for me.

[@thetexasgunvault]

I hope it is and I hope it is a wonderful rifle for you.

[@brandhark7935]

@@thetexasgunvault Thank you sir! Great content youre making here.

[@jknewb6276]

Well I was considering one in .308 once upon a time, with over-gassing possibilities and the weaker MLOK handrail is enough to stear me away. Appreciate the video!

[@thetexasgunvault]

You are welcome!

[@davidblake1343]

I just bought a diamondback db15 at the local hardware, $480. It came with an magpul stock and grip. It does seem to run a little over gassed, but am thinking about changing to a heavier buffer. So far I am happy with the purchase.

[@thetexasgunvault]

I am glad to hear that. Their quality seems to be spotty and I am happy to hear yours is a better one.

[@andrewadams5905]

You do realize you can change the buffer weight and spring for under $100 and make that gassed perfectly. Ive done it to 2 diamond backs. Spitting brass at 3 oclock now run Like a sewing machine. Cut the recoil in half. I have this same one. But if you cant do these things yourself mabie not the best choice tho. Just got one fde. Even the barrel was ceroketed fde on this newer model for 550. And it comes with the full length 15 in handguard now to.

[@thetexasgunvault]

The gas port is probably out of spec. Changing those things is just putting a band-aid on the problem but not fixing it.

[@andrewadams5905]

@@thetexasgunvault how does it not fix the problem? If it's doing what it's supposed to with h2 and sprinco extra power spring? Cuts the recoil in half. I get it your right with the gas port is to big. But being able to adjust with a buffer is a good thing. If the port is to small you can't turn it up.. Only option is to drill it.. so I would think being over gassd being able to adjust it with buffer and spring is alot better. Alot more options. If it's under gassed your just screwed period.

[@richki.24]

hell my SD9VE worked from Day 1 rite out of the box until I had a local gun smith try and install an Apex trigger and spring kit ...

[@thetexasgunvault]

I hope it worked out.

[@kennyharp4125]

Ive got one, dont have the takedown pin issue but i believe my trigger is probably just as heavy. Ive gotten used to it but will look into the one of the 2 you mentioned.

[@thetexasgunvault]

Sounds like you have a good one.

[@kennyharp4125]

​@thetexasgunvault Ended up installing the Geissele SSA-E 2stage trigger. Freaking awesome and light.

[@rudyv6100]

I’m with the other guy…I have a couple of AR’s of almost every manufacturer…I’m old school and don’t like accessories…I will install a new grip, trigger, and maybe a buttstock…other than that ( besides an optic ) that is all I will add differently …my two DB’s are awesome…work fine…as do all my others…AR’s are you simple to modify…whether it be buffers, triggers or BCG’s….easy fixes…if you spend $399 then you have plenty of money to make it very reliable…or just to your liking…sometimes we get very nit-picky…with no reason to be that way…

[@thetexasgunvault]

All good points and I am glad yours is working well for you.

[@roysprayberry2287]

LOVE my diamondback. Great budget AR15.

[@thetexasgunvault]

I am glad it is working well for you.

[@Spitzkopf366-APM]

Would it make a difference with the overgasing if you shoot .223 remington out it? Where i live, 556 is not available for purchase but the db15 is available at my local gunstore

[@thetexasgunvault]

I think they would be about the same.

[@trokilwhite]

I have a few DiamondBack rifles. I did however changed out the triggers, buffer tubes, springs and stocks. I thought the muzzle brakes were horrible as well so I ended up changing them as well.

[@thetexasgunvault]

Wow! You pretty much changed everything!

[@analogueoverdigital929]

The trigger from db15 is one of the best stock ar triggers....

[@andrewsteele7663]

Good morning, Jason, I will take a budget friendly AR any day. Especially if it shoots as well as that one. Cheers I had a thought bubble, is the gun affordable so that it's a base for a custom build, 👍

[@thetexasgunvault]

I do not know if you would want this one. It is way over gassed.

[@1980bwc]

New subscriber here. Im needing to figure out which rifle to buy, for my first AR15. Ive owned shotguns and rifles all my life for hunting, and have had my handgun carry permit for about 16 years, but I have no knowledge or experience in the AR15 world, whatsoever. Trying to figure out which one best fits my needs, is nearly impossible to do, due to there being what feels like a million different ones.

[@thetexasgunvault]

I know it can be hard. Let me tell you though, you do get what you pay for. I would recommend a Colt 6920.

[@brianedgett2134]

My DB10 has been a great rifle. All I have done is change stock and grip with the trigger to a flat face trigger. It ran with a can on the end that way. So I have no problem with mine.

[@thetexasgunvault]

I am glad you hear that. I am sure that many are fine.

[@gavinlamp5426]

I've never owned a rifle before, but im saving up money to get one. Doing research, Ive narrowed it down to either this, or the Del-Ton echo. If anyone has any opinions about either, Id be happy to hear them. So far, the two of them seem like great options.

[@thetexasgunvault]

I hope you get a nice rifle and I hope it is only your first of many. Congrats and I am super excited to see more people like you getting into the 2nd Amendment.

[@Rueben-xr1cs]

Ive had two One came with a canted gas block and the lower was machined too thick and because of that, it was impossible to install an ambi. The buffer system is subpar. The other was solid all around. The trigger is ass, but reliable. The buffer system is ass, but reliable. Theyre a good deal if you dont mind questionable QC and dont mind replacing some things like the rail and buffer.

[@thetexasgunvault]

This is what I am hearing from many others too. I am sorry you had those issues.

[@ToddSpeed14514]

Some of your variability in the trigger pull might be that you aren’t placing the line of action at the same exact angle each time? The test itself is a little variable without controlling and measuring that force vector?

[@thetexasgunvault]

That might be the case. I do my best to be as consistent as possible.

[@larryh3267]

Thank you I think so too

[@thetexasgunvault]

You're welcome

[@rd9219]

Oh yeah. The Sound of FREEDOM!!!

[@thetexasgunvault]

Thank you.

[@survivalcampman]

Man I would love to live in Texas some day.

[@thetexasgunvault]

Why is that?

[@pcalna3202]

Same. Except it's so hot. And getting some California people moving in.😬

[@СергійСергієнко-с7з]

the question for the owners of the db 15 is what accuracy it is capable of with a good cartridge?

[@thetexasgunvault]

Probably just fine.

[@davidmckinney8423]

I've had my Diamondback DB15 for about 2 years now. I've sent about 500 rounds down range with it since. I've experienced one double feed so far.

[@thetexasgunvault]

That's pretty good.

[@reidmauldin3203]

I'm new shooter with very limited experience with guns. I haven't had any complaints. But then, I don't any experience to compare it to.

[@thetexasgunvault]

Welcome to the hobby!

[@RayRay-nn9wm]

That's good, just enjoy it and don't look for problems that may or may not exist. In the Corps we shot used up M16 A2's and guess what, with minimal range time and proper instruction and the BRASS principle you can shoot any rifle pretty accurately as long as you are cositant

[@01rcpena]

I agree. Thanks, but no thanks. Nothing less than Aero Precision for a budget build. Complete uppers and lowers are solid in my experience.

[@thetexasgunvault]

I agree. Aero makes good stuff for the money.

[@kylerthomas7406]

I have the same DB-15, and I have the same over-gassing issue, not to the point of burning my eyes, and have had 1 malfunction in the first magazine, no issues since then. I'm thinking an H3 or 4 buffer to help negate the over-gassing issue.

[@thetexasgunvault]

I think that buffer change might help. That is a great suggestion.

[@pcalna3202]

​​@@thetexasgunvaultThat's a hell of a weight for an AR-15 in 5.56 ain't it?! 🧐 Maybe borrow an adjustable one til you get the weight right? Just an idea.

[@jamesdelong6401]

Hows your diamondback AR still shooting after 7 months?

[@thetexasgunvault]

This was a firearm lent to the channel for review. I no longer have it in.

[@maffamatics7]

Thoughts on the RUGER 556 AR15? Around $750 bucks in my area. I’m guessing that’s a budget AR price? I’m trying my best to not go buy an AK47

[@thetexasgunvault]

I think they are nice. They are a step up from Diamondback and Smith & Wesson.

[@maffamatics7]

@@thetexasgunvault thanks!

[@Ray-vq2jc]

I was wondering what you think of the Smith & Wesson sport ARs Sport 1 and Sport 2 because I own both . I have fired them once and couldn't fire many rounds through them because the gun range would not let me shoot certain ammo but there were no jams or misfires. I have the same stock like the gun you fired and it did have some punishing recoil . I have always seen positive reviews on these guns . Thank you .

[@thetexasgunvault]

I have not had any issues with the S&Ws. I have yet to review one though.

[@Spikal3523]

What r u talking about I own 2 DB-Copperhead AR-15 and have never had any of the problems u r talking about.Maybe the problems ur finding are not the rifle but the people who own them aren't taking very good care of it.

[@thetexasgunvault]

It is possible but I know and trust the owner of this rifle.

[@ourlifeinwashington4114]

I wouldn't believe your "friend". Ive never had any issues with my DB15 ever in 6 yrs and ive put enough rounds through it to replace the batrel once. Db rifles are unlike most made all in-house so.parts fit together bettert Business is a dirty trade so you cant trust a business that might have stock in one company to tell you the truth about another that might be a competitor but you can trust the testimony of those whove owned it

[@thetexasgunvault]

Well, I do believe him. He is a good guy and has no reason to lie to me.

[@ourlifeinwashington4114]

@@thetexasgunvault you said he told you they're the most returned rifle, how many would that be? I defend Diamondback for a few reasons one I've never heard of anyone returning their gum nut when the brand first started there was issues in some of the db15 but was quickly fixed. 2 they test a full mag through every hun before it leaves 3 all parts are made in house which lends to heater consistency and fitment of parts i.e. upper to lower and 4 they're an American company employing hundreds of people but most of all my experience has been a great one with Diamondback. I appreciate your video and thank you.

[@crhemi808]

@@ourlifeinwashington4114 I hate spelling too

[@dannypierce1426]

I own a couple of diamond back rifles but I have replaced trigger with trigger tech adjustable ar trigger, rifle speed gas block and new buffer spring,weight, radiant sd charging handle minimalist rock and sling it has a sierra 5 on the end of it it runs great it’s in the shop now getting some more work done to it

[@thetexasgunvault]

I am glad to hear you got it running well.

[@johnsilva4174]

Buying my first ar which one would you recommend

[@thetexasgunvault]

Colt 6920

[@cassivellaunushonestus4927]

Does that one have the carbine length gas system?

[@thetexasgunvault]

Yes

[@cassivellaunushonestus4927]

@@thetexasgunvault Do you reckon that could account for part of the heavy recoil?

[@817tactical5]

I don't like the ping sound it makes when the bolt carrier closes. It sounds cheap. Thanks for the review. Going back to PSA.

[@thetexasgunvault]

I do agree.

[@BillyWaters]

Over gas I hear is due to a newer style m2 block they are installing.

[@thetexasgunvault]

That is good know! Thank you for sharing that information! It helps a lot!

[@jackdickenson5313]

That's why I use anti walk trigger pins exclusively.

[@thetexasgunvault]

I think that is a good idea.

[@EmersonS7]

Thanks for the video, I gave up on buying the Diamondback, I'm going to move on to something better 👍🏼

[@thetexasgunvault]

I just try to share my experiences and give my opinions.

[@EmersonS7]

@@thetexasgunvault you were very helpful, thank you 👍🏼

[@jroutdoorchannel4247]

The Diamondback db15 sell like hot cakes at most local gun stores for the budget price range. For the most part these are good overall guns for what you pay, I call them the Taurus of Ar's. They don't suck they just work and like the Taurus its definitely a notch or 2 above a Hipoint. I know Taurus made an Ar15, but I am mainly speaking about pistol comparisons for those that know more about pistols. You get my point, pun intended LOL. Anyway, I would put some of the diamondbacks close to with the cheaper Smith and Wesson Ar15's. The S&W Just work as well. I actually like the S&W M&P15 Sport II it is very affordable as well nothing wrong with them on function, I just don't like the Grip on them. Some Law Enforcement around here use the S&W M&P15 Sport II. You will have people that hate on S&W too or any brand for that matter if they don't offer a 2-3K+ Gun. I would put American Tactical Omni like a Hipoint, they are your very bottom Tier. I have shot some and yeah they fire but the quality is what you would expect for very bottom. If you want a solid step above a diamondback and even a S&W ar15, that still is below that $1000 price point I would direct you towards IWI Zion. I see them for $870's and sometimes it is hard to find them. Probably my favorite for that $900 price point and no, you don't NEED to have a $1000+ AR to be considered good. The IWI is probably one of the best ar15's under $1000 if you buy outright, (not talking if you build one). There are others worthy of mentioning like Sig sauer m400, there are some versions in the $850-950 range. Stag arms has some lower models in the $800ish range. I would go for the IWI if you just want something that is very awesome quality for the price and under $1000. It is definitely considered a "Mid range" gun IMO. I would not define it as budget so to speak, more as mid range. Definitely not a top Tier gun / model of course that is a completely different ball game where you are going to spend very well over $1000+ lol.

[@josephhumble9250]

How to tell manufacturing date on db15

[@thetexasgunvault]

You would have to do a serial number look up and probably contact them.

[@rustypoorboy]

2000 rounds out of mine with never a hiccup. I suspect your gunshop guy was full of crap.

[@thetexasgunvault]

I am glad to hear that.

[@BIGTANKGUNREViews]

My Diamondback never failed…..never

[@thetexasgunvault]

I am glad to hear that.

[@CutThroatGhosteG59]

Yeahhh it’s all subjective or personal experience. I have the exact same Db-15 and I haven’t had ANY of the issues you found. Although the butt stock is definitely super aggressive lol

[@thetexasgunvault]

I am glad to hear that yours works so well for you.

[@jjohnson8977]

I like reviews but you get always different opinions

[@thetexasgunvault]

Everyone is different and all I can do is report my own personal experiences.

[@jjohnson8977]

@@thetexasgunvault i hear ya people seem to like this rifle. I like that its made in USA. Thier site indicates they aren't even buying any foreign parts. I like that doing my best to keep money in USA

[@clintonsiles709]

I build mine but have had no problem but I have CMMG lower parts kit

[@thetexasgunvault]

That is great to hear!

[@adamrodgers2377]

I have 6 Diamondbacks 3 DB15's and 3 Black Gold series these AR's combined probably have 14,000 rounds on them. The only problem we have ever had was wear items and my Daughter shot her MK18 Style so much the Bolt Broke and I consider Bolts wear items. You just got a dud, I could say the same thing you have about Daniel Defense, 4 damn times back to the factory and I had to get my money back cos that POS would not run. Hell i even had to send one of our SR15's back to Knights but i tell ya what that KAC came back running like a scalded dog. We have Noveske's, M&P's and NCM's plus a few we assembled out of dned good parts. Anything made by Man can and will screw up but saying Diamondbacks aren't worth it because of 1 AR isn't being genuine.

[@thetexasgunvault]

That might be the case. I am hearing from people that the dud rate maybe higher than other companies, but it could be a dud after all. All I can do is report what I experience.

[@adamrodgers2377]

@@thetexasgunvault My I ask who are these people? I can tell you about my experience and my friends and some Customers experience with Diamondback AR's now there Pistols (Conceal Carry Pistols) you couldn't give me a truck load of them but the AR's are a different story. Anyway I can put my hands on 22 Diamondback AR's and I can call another 7 or 8 people and these folks shoot them in 2 and 3 Gun Matches, Self Defense Courses and the like. Shoot my Daughter, Girlfriend and myself took our Black Gold Diamondbacks to Gun Sight and a Kyle Defoor Carbine Class then taught 6 classes around home with the same AR's. Now we did take our Noveske's as backup. I'm a little crazy but not that damn crazy 🤣 I would honestly like to know what is going on with the DB's you and your Friends have messing up because I wonder if there between a particular time line or something like that.

[@larryh3267]

Looked at one but ended up with 2 Springfield saints put a red dot on one and a lobo on the other

[@thetexasgunvault]

I think you made the right choice.

[@larryh3267]

Thank you I think so I put that new sig hvlp in 1x6 and that seems like a nice scope so far

[@johncrowley4382]

I have one. No issues here

[@thetexasgunvault]

I am glad to hear it.

[@steviecoleman9260]

Bought a week ago, not 1 issue!!!! Not even close

[@thetexasgunvault]

I am glad yours is working out so well.

[@theboogiechowofficial6917]

Well over 3k rounds through mine only 2 jams

[@theboogiechowofficial6917]

Only thing I can say is the fitment of the upper and lower has a little play but that doesn’t effect the accuracy

[@thetexasgunvault]

That is great to hear. I am glad you have one that runs so well.

[@hansblitz7770]

"Mine works great" "Never had a problem" Translation, "I shoot 3 mags a year"

[@thetexasgunvault]

Lol, probably.

[@fredswenson-r2m]

How long. Is the DB 15 warranted for.?

[@troutslayer5518]

🙄

[@thetexasgunvault]

?

[@awesomeneiss]

bcm upper and bcm lower.

[@thetexasgunvault]

BCM makes good stuff.

[@matthellcat2494]

I unfortunately owned a DB at one time... worst gun I ever purchased.

[@thetexasgunvault]

I am sorry to hear that.

[@brentacusmaximus6677]

I've got well over 4k rds through mine and its run flawlessly lol its funny how guys that spend 2k on an AR automatically put down an awesome non over priced rifle.

[@thetexasgunvault]

I am not putting it down. I am only sharing my experiences. I own many cheap and affordable guns. Go watch my other videos. Many expensive guns I do not like and many cheap ones I do. So before you talk about me in 3rd person like I do not see these comments, maybe you should check out more of my videos to get a more informed and educated perspective before making assumptions. Many times people like yourself are ONLY looking for confirmation bias that your purchase was the right one. Well, sometimes you may like something others do not and that is ok.

[@brentacusmaximus6677]

@@thetexasgunvault lol I wasn't even referring to you. I was talking about guys that are AR snobs that think an AR under 1k is junk. I also have a Ruger dpms m&p and I like um all pretty much the same. I'd be interested in knowing what year that diamondback was manufactured ?

[@brentacusmaximus6677]

@@thetexasgunvault also i was actually reminded of a couple youtubers that basically crap on all the AR's i own. Like if ain't a Daniel defense its junk lol

[@joemorganeatmyshortschannel]

Most issues with budget guns are tolerances and qc stuff

[@thetexasgunvault]

Well, this one has plenty of them.