🔥 RCBS Powder Scale Instructions PLUS Tips on Precision Measuring

[@bryanbetournay5557]

I had my bearing come loose on my 5-0-5 scale and it was not off by much but it wasn't good!

[@atlyvwire]

Bryan Betournay yeah we have to keep an eye on these scales. As we know what can happen with being off just a little bit! 💣

[@tripplebeards3427]

Thanks for the tip. I just got one used. Send to me package, which obviously was the problem. Adjuster leveler was Ken and I just replaced it. The beam would Not return to zero. I finally fingered out the inspection window were. The leveling mark is on was bent in rubbing on the beam. Once I bent it out I was good to go.

[@thetexasrat]

I weigh every charge! I use a powder thrower to dispense powder into the scale pan, a trickler to round off the charge weight on a beam scale, and then I set the pan onto a digital scale as a double check. If the two scales do not agree I recheck the beam scale poises and re-zero the digital scale. Normally it is the digital scale that has drifted, but once it was a beam scale poise got moved by accident. Either way all my powder charges get checked three times. Twice by scales and once with a visual, in the loading block, after I have charged a batch before seating bullets. I do what I do for safety, not speed, cause as the old saying goes "SPEED KILLS!" And I encourage all to not find out the hard way. All in all, none the less I can charge cases in the same amount of time that it takes for one of the digital auto trickler scales.

[@scenicdriveways6708]

Good video, thanks for sharing. I've been using a digital scale for quite a few years now, but I'm going to buy a Beam Scale soon. This video has been very helpful. Thanks again. JT

[@MusicMinisterJP7]

Thanks for the demonstration. I have done rifle loads, in around 50.2 or 50.5, but I am not entering 9mm pistols loading and I have the rcbs 502 scale, except, I don't know if the left side ruler is used with the right side. I am trying to obtain loads around 4.7 and 5.1.. How would I set that up?

[@TheMoodyedge]

Hello from England, UK. Just found your channel... Subbed

[@atlyvwire]

Awesome bro! Welcome.

[@wemcal]

Great information... thanks for the video

[@atlyvwire]

Thank You.

[@TheHuntercamper]

Like the "to the point" vids.

[@jeffgatewood4695]

Very good

[@atlyvwire]

Jeffrey GATEWOOD Gatewood Thank You.

[@USMC-ParrisIsland]

I broke the foot on my RCBS 505. . Anyone know where I can get my hands on an RCBS foot? I couldn't purchase one from the company. Strange, they didn't have any.

[@gshock3092]

I prefer the 2 poise scale over the 3 like urs

[@atlyvwire]

💥 GIVE-A-WAYS! 💥 If you haven’t subscribed yet, I am giving away a $50 Cabala's gift card to one of my first 200 subscribers so sub today and be entered to win. I will likely do other give-a-ways down the road as well!