RE Interceptor 650 | PILLION FOOTREST EXTENDER | UNBOXING & INSTALLATION

[@shrikantbijwe9650]

Very nice produced go for it. I am using it from last 4 months. After fitting this you can use saddle bag also , pillion can seat more comfortable.

[@ImtiazKupe]

One problem could happen as both rider pillion load will on front Side two bolts ...chances that it will transfer all the load in one location..

[@burjis24]

Howcome Royal enfield is so stupid to make the.silencer so bend upwards which screws up the.pillion sitting posture....from the begining buyer needs to buy a lot of after market acccesories.....after market companies have more sense compared to royal enfield charging 3.5 lacs with all these problems in bike....pillon footrest...pillion backrest....pillion seat height

[@SuperDeep69]

Agreed 💯

[@dipanjansen3642]

This is one of the reason I am unable to buy interceptor, as my wife is not at all comfortable sitting on this. This one is super helpful. One thing, do they ship all over India?

[@VijayHansora]

Yes they do ship all over india

[@sscbkr48]

That's unfortunate as it's a great bike.. my wife didn't like it either and being taller, I found the pegs too high and too far back. Its an easy fix to move the pillion pegs 6" fwd and 2.5" dwn sharing the same mounting plate. Also allows you to move the main pegs 3" down and 2" fwd. Visually it looks fine and now we're both happy. If I knew how, I'd upload a pic.

[@abhilashapati4677]

Get a new bike and a new wife

[@rubikiller]

Where I can find instead the chrome pillion foot peg over the exhaust?

[@VijayHansora]

I think that is available in RE showroom

[@Rosbif06600]

It's a pity the position is not also lowered as well as forward.

[@Tapas_nag]

Female pillion k liye konsa footrest lagaye ho silencer k upar

[@avirupbanerjee3874]

Can I shift the rear footrest too with the rear footpegs ? Coz if I put these on then those rear footrest will be waste for me.

[@VijayHansora]

You have to use the same rear footpeg. If you see the video that is what I have done. You don't need to buy footpeg set.

[@avirupbanerjee3874]

@@VijayHansora no I am talking about the additional footrest which you have installed in the silencer bracket. the one which is in chrome after the rear footpegs.

[@VijayHansora]

@@avirupbanerjee3874 you don't have to move it that becomes your support it doesn't go waste. Moreover you can't move it as it has 2 mount point.

[@avirupbanerjee3874]

@@VijayHansora ok.. thanks for the info. but I wish it had mounting point for those since if I move the footpegs forward those will be pretty much unused atleast for me. nice product and a well informative video. 👍🏽 keep it up.

[@VijayHansora]

@@avirupbanerjee3874 actually that helps me as if I take my kid and wife the kid puts his legs on the extended footpeg and my wife keeps her legs on the silencer footpeg. If I keep a claw bag it won't touch the silencer

[@shivasundars6757]

Hello sir, is this compatible with GT? I don't think so!!

[@ankitpare6493]

Tool kit used seems to be pretty awesome.

[@VijayHansora]

Thank you

[@kdrspin9615]

Can this be used for continental too??

[@chittaranjandash9999]

U r the great Vijay bhai

[@VijayHansora]

Thank you so much

[@Asphaltxgaming]

What happened to dominar. No videos on dominar

[@VijayHansora]

Dominar is in Bangalore and I am currently in Surat.

[@SajithS10]

@@VijayHansora If you are planning to sell it let me know

[@VijayHansora]

@@SajithS10 if ypu want to buy you can Watsapp on [phone]

[@sagar111111111]

Hey does pillon rider leg touch the riders leg while you drop down your leg in traffic or you want to drag your bike backwards

[@VijayHansora]

No it does not.

[@sadguynextdoor8422]

Can it be used for gt 650 as well?

[@praful475]

Good one but if the plates angle would be lowered then more comfortable leg will get more lowered and little forward

[@VijayHansora]

If lowered and forward then it may touch rider leg.

[@sscbkr48]

@@VijayHansoraI dropped both sets using the same plate bolted to factory anchor points.. Front pegs are 3" dwn and 2" fwd. Rear pegs 1.5" dwn and 5" fwd.. big improvement! Used a shorter shifter linkage. I can stand on the pegs when riding gravel roads. Still need bar risers, better suspension, exhaust, maybe some K 60s and a few other goodies. 👍👍

[@wilbursoans8414]

Could you give me the link of both the products

[@uttam6616]

Can be fit this product in classic 350

[@sandeepdash3919]

Hi Vijay, I am getting an interceptor in some days. Wanted to know where did you get the silencer’s guards? I mean the ones that protect the pillion foot to rub against the exhaust.

[@VijayHansora]

You will have to visit the aftermarket place or call service center as they also keep few stocks.

[@chiragd2423]

Nice vijaybhai....

[@FerdiAgrippino]

good idea but I drive always alone. But is good.

[@weekendhoppers]

Hi Vijay Can you please share some pointers for the spanner used in this video, looks really comfy to use 😊

[@Tushar-mm7os]

Should we buy these extenders or the one which extends from rear footrest instead of front one?

[@VijayHansora]

This is perfect mod if you have a pillion as i personally used it where my legs were going all the way back but with this i had better posture. The Vendor is working on Front rider extender but the design is taking time as there are many challenges as per my last discussion with vendor.

[@Tushar-mm7os]

@@VijayHansora Thank you 😊I already ordered this 😊👍👍

[@vichu650]

Does it disturb the front rider foot??

[@VijayHansora]

No check the video towards end I posted the photos. There is a big gap

[@vichu650]

@@VijayHansora yea saw that... will do it bro

[@kshitishkum]

How much inch does it increase than stock one ?

[@SouravAcharya9444]

Nice stuff 👍

[@Saibablu67]

Will it work for Meteor 350?

[@karanlalwani009]

Hey did u find amy solution to fit centre footpeg?

[@abhishekv5707]

Does this suit for gt 650

[@gopalpodder1449]

Great

[@SajithS10]

Very useful video Vijay

[@VijayHansora]

Thank you so much

[@Amit-nh2pu]

bhai salman khan ko kaam p lga rkha hai kya aapne.

[@VijayHansora]

😁😁😁

[@lathag.e8161]

is work for GT

[@Dr_Trap]

Can the foot rest take the weight of the pillion? If someone tries to stand ,?

[@VijayHansora]

Yes it does take the load of the pillion when you stand on this.

[@sscbkr48]

I'm 200 lbs and can stand on my modified front pegs, but why would a pillion want to stand, apart from mounting/ dismounting I mean.

[@VijayHansora]

@@sscbkr48 the main purpose for moving the pegs is so that the pillion legs are a bit straight and don't go back which happened to me as a pillion. So this position move helped to relax my legs properly compared to stock which bends my knees more. This is not about just standing or saddling.

[@babuo7682]

Bro.. How to remove water marks from engine cases? Pls respond

[@VijayHansora]

Use a Vista Metal polish it will be for 300 approx or of you don't get that that buy Brite-O polish

[@babuo7682]

@@VijayHansora I used autosol metal polish, but still marks exists. Brito o polish is not having good feed back. So i will try vista, is the usage process is same as autosol? wt is ur personal choice for 650?

[@VijayHansora]

@@babuo7682 I have personally used vista but if you have too many sitting and doing it with hand will take long time. Just go to a detailer and he can do it with machine way much better and then you maintain using vista with hand.

[@mrnik2368]

Very helpful thank you

[@varuncox]

Gg’s Thank you !!!

[@xplosiveseries]

Pubg player spotted👍

[@varuncox]

CODM bro ! :D

[@ajithkumar1511]

How does these help if pillion sits one side ?

[@VijayHansora]

If pillion sits on one side it will still help as ideally the position on far behind now it is in front. So that would help the pillion right leg to stay more straight.

[@vinaynaik4823]

Can this be fitted in meteor 350?

[@VijayHansora]

Call the number in the description they will help you.

[@mohdhaq640]

Shukriya bhai

[@mamba_tales4485]

Kardi na choti baat ! "Box mil gaya"

[@VijayHansora]

Yes hum chote logo ko choti cheezein achchi lagti hai.. 😁

[@tapaskumarnayak9642]

Agar koi saree men pillion baith sakta hai? Side wise

[@VijayHansora]

Haan side wise bethne wale ka per sodha rahega.

[@kate123456dave]

Bohot Sahi 👍

[@gabynox]

do you still sell it?

[@punkeshhansora1567]

Yes

[@bhagathkrishna2542]

Can you make a another video with pillion 🙃

[@VijayHansora]

I have already pasted the pictures with pillion sitting. You can ping me on facebook I will try to share some video of ride where someone captured us on GoPro. May I know your concern so I can answer it directly

[@bhagathkrishna2542]

@@VijayHansora bro what's your fb id

[@VijayHansora]

@@bhagathkrishna2542 same Vijay Hansora

[@dreamhard8046]

Price

[@VijayHansora]

1499. Please watsapp [phone]

[@NareshKumar-ff3dn]

Super

[@Asphaltxgaming]

First like

[@VijayHansora]

Thank you so much.. 🙏

[@NEHAKUMARI-xv7ok]

Kahan se kharidi bhai

[@VijayHansora]

Call 09427631118

[@Hackurr14]

Kaha milega sir yeh

[@VijayHansora]

Sir aap yeh number pe call kariye. 9265952453

[@BHARATPATEL-hr9yr]

Nice video

[@saiphaneendrabhupathi4441]

Price please 🥺

[@VijayHansora]

Got it for 1499. Seller Watsapp no. 9265952453

[@mehulrathore19]

Aur Plastic ka Dabba

[@akashbera160]

Does this work on GT 650?

[@sajinsaju1854]

Can I use this for my gt650?

[@punkeshhansora1567]

Yes u can