Rear brake pads, Mitsubishi Outlander 2017

front and rear calipers are different. this is how I compressed the rear caliper without the special tool. you can do this at home.
• 2006 Toyota corolla sh...
same car
• How to change brake pa...

[@ur_teacher1232]

Big thanks man I've wondered a way around that damn tool and thanks for the lesson

[@SolofixOrlando]

I'm glad I was able to save you some cash and time getting that tool...

[@mitchelllankford468]

I have the tool. Got it from Harbor Freight and thanks

[@SolofixOrlando]

@mitchelllankford468 best of luck. Now put that baby to work and let's get dirty.

[@2286cc]

Thank you for that. I will now try the replacement of the rear brake pads on our Outlander.

[@SolofixOrlando]

Feel free to ask any questions about fixing cars...I'll be happy to help

[@roberthausvik6088]

Is this a electronic handbreake?

[@SolofixOrlando]

@@roberthausvik6088 no sir, it's the manual one

[@bibbylimes7976]

Great catch too uncle sol!!😂😂👌🏾👌🏾

[@SolofixOrlando]

I learned that at work... catching a falling knife...lol...j/k

[@BuhlouBear]

Thank you for posting

[@SolofixOrlando]

I'm glad you find it helpful. God bless and be safe.

[@bleachlover9115]

Awesome video, thank you so much

[@SolofixOrlando]

Thank you. I'm glad you find it helpful.

[@renemiraflor8637]

both caliper and hub bolts to loose you turn clockwise? would assume its the same process with 2018.

[@SolofixOrlando]

Yes, turn it clockwise. I'm pretty sure it's the same 2018 model

[@bibbylimes7976]

Great quality!! Smooth fix!!🙌🏾🙌🏾

[@SolofixOrlando]

Thank you...still need more work

[@manueljustice1278]

I know Im randomly asking but does someone know a method to get back into an instagram account?? I stupidly forgot the account password. I love any help you can offer me.

[@brunolouis7390]

@Manuel Justice instablaster ;)

[@manueljustice1278]

@Bruno Louis thanks so much for your reply. I found the site thru google and im trying it out now. I see it takes quite some time so I will get back to you later with my results.

[@manueljustice1278]

@Bruno Louis it worked and I finally got access to my account again. Im so happy! Thank you so much you saved my account :D

[@JesusCruz-ng1my]

I’m limited in tool what’s size bolt is that for the calibers

[@SolofixOrlando]

14mm on the caliper bolt and 17mm bolts to the hub

[@gcagca3001]

well job! nice video...

[@SolofixOrlando]

Thank u

[@Bloxfruit-p8f]

Awesome job 😁😁

[@SolofixOrlando]

Iwe iwe... hi there😘

[@mitchelllankford468]

Good hands

[@SolofixOrlando]

thank you very much...

[@thebrain6201]

Nice

[@SolofixOrlando]

Thank you

[@MarkBradby]

Superb!

[@SolofixOrlando]

Thank you! Cheers!

[@ripas8028]

Awesome..lol good catch!

[@SolofixOrlando]

Thank you so much sir

[@nickpetti1767]

Can’t find my comment. But you told me to connect wires to the piston motor and to the battery. It’s not one I can just push in? Also just wanna be sure there aren’t certain pads I need. Still need the pads like in the video right? I believe I have the two pads. Been 8 years since I swapped my own pads. Usually have someone else do it so the electronic e brake someone mentioned threw me off. They made it seem like you need special brakes. Sorry I don’t do a lot of work on my cars as u can tell

[@SolofixOrlando]

You have to connect piston motor to battery in order to push it back. And brake pads is all same.

[@SolofixOrlando]

The brake pads you have is better, less dust

[@nickpetti1767]

Ok thanks for the help. Appreciate it

[@SolofixOrlando]

@@nickpetti1767 your welcome.

[@TheReelRodeo]

You turned brake calipers COUNTER CLOCK WISE. not closkwise

[@SolofixOrlando]

@Pineapple Yellow, yes it is clockwise but the angle of the video makes it look like counterclockwise. I'm a right handed and I'm using my right hand to turn so yes it is clockwise. Thank you for the question. Don't forget to subscribe

[@thebrain6201]

Do you turn the caliper in the rear all the way back?

[@SolofixOrlando]

Just enough to fit in the brake pads

[@ralliart4j12]

感谢分享。

[@SolofixOrlando]

have no idea what's you're sayin.

[@roycrowe8072]

I tried to turn back the caliper with needle nose vice grips and with regular pliers and it won't move either way. Do I need to push them in with a big c-clamp?

[@SolofixOrlando]

It is pretty tight. If anything you can rent the caliper proper tool and use that, much easier

[@roycrowe8072]

@@SolofixOrlando Thanks for all your help. Your video was very helpful. I learned from a couple other youtubes a few more pointers that helped me get the caliper collapsed without renting the tool. Namely, take the top off the master cylinder to relieve any back pressure, release the emergency brake, put a bit of lube under the rubber seal on the caliper and most importantly, push in hard on the caliper as you turn it. In the end I got it done.

[@SolofixOrlando]

@@roycrowe8072 I'm glad you got it done. Yes I'm trying to help people spend less or nothing at all. Cuz me myself I don't want to spend so much in the shop. Feel free to ask any questions any time. Thank you ang God bless.

[@Dark6031]

Thanks for the vid. Do you have the electronic parking brake on yours ?

[@SolofixOrlando]

No not for this one

[@larios032281]

Brake pads are different as well made the mistake of getting them from autozone and they were different

[@Dark6031]

@@larios032281 yea I am having a hard time finding brake pads for the ebrake version. Which one did you end up buying ?

[@larios032281]

@@Dark6031 I had to go to the dealership.. but I'm looking to change my rear pads again so I'm looking and says they might be the same for v6 outlander and the phev pads for the back

[@SolofixOrlando]

@@larios032281 yes you're right about that, I was fortunate the auto shops have it here on island

[@cypherdmz5562]

Do you not bleed the brakes?

[@SolofixOrlando]

In my case I did not open the break line. I only push back the caliper so if u see at the end I pressed on the break pedal to return the caliper. So no need to bleed the break because no air went in the break line. Hope that answers your question.

[@cypherdmz5562]

@@SolofixOrlando if you did all 4 brake pads would you bleed them? I need to do mine but not sure if i will need to bleed.

[@SolofixOrlando]

@@cypherdmz5562 you don't have to if you don't open the break line, but if you open the break line then you need to bleed it.

[@cypherdmz5562]

@@SolofixOrlando ok thank you.

[@SolofixOrlando]

@@cypherdmz5562 hopefully everything go well when changing your breaks. I be more than happy to answer any questions you may have while doing your breaks.

[@1steventolsen]

What was that at end?

[@SolofixOrlando]

Sorry u gotta be more specific.

[@SolofixOrlando]

That's releasing the caliper...press on the break pedal