Rebuilding The Snyder ST600-C: Did This Unexpected Find Ruin Everything?

[@TheQuestionableGarage]

Shop Beam early cyber access for up to 50% off when you click shopbeam.com/TheQuestionableGarage and use code QUESTIONABLE at checkout for a limited time only.

[@ste_zace]

i have visions of somewhere i family has auto parts with christmas tree decorations hanging on them in the corner of their living room

[@KingKeson]

The Christmas tree had me laughing! I worked for quite a few years in parts and ordered oversees and it’s wild what would come in sometimes due to someone at customs or shipping making a mistake! Great video as usual and awesome job on getting this thing closer to complete!

[@anangryoldman8469]

Never seen one of these before this video - then yesterday I drive by one parked at a pawn shop in Panama City Beach!

[@justinpakarno4346]

Meanwhile in Santa's workshop: "What in the Holy Christmas is a crank angle sensor?"

[@ptonpc]

"Angel. Guess what's going up your bum this year!"

[@milesthroughtime]

So close. Thank you, and thank everyone who's helped

[@danmorrison7112]

Jared, The card Stock you want comes from Cereal boxes. I love them. also, drum head boxes. and construction paper

[@Jools-j2l]

A good tip to mark bolt holes in steel or card/ wood etc is to find bolts with correct thread,cut the head off, sharpen one end to a point , screw the non pointy end in to the threaded holes , hold the steel in position and tap sharply to leave your indentations where to drill.

[@JinushiProjects]

while doing "CAD"....., dab of grease or oil on the traced item would help mark the "CAD"

[@ssykes80]

Get a roll of ram board from your local building supply place...makes for great templates. Its the paper board stuff they put on to protect your new floors on a new construction project.

[@GenericAnimeBoy]

I'm actually a little surprised this isn't an Aging Wheels collab.

[@charleshadle9376]

Jared, you need a profile/contour gauge for fabrication. Traditionally used for woodworking/tiling.

[@TheQuestionableGarage]

I’ve used them a ton before, just need to add it back to the tool box

[@xj39eldiablo]

When i saw the thumbnail i was shocked, thought it was a 1st gen Daewoo Matiz, the M150 model that was sold under Chevi’s badge in Europe as the Chevrolet Spark. Then i noticed 3 wheels… it’s wild that 1998 body with 2000s restilyngis still being made.

[@AnItalianGuyOnYT]

they also sold it under the " chevrolet matiz" name

[@EmptyPocketsXotics]

I understand they had their differences, but I really enjoyed Jared and Tavarish together ❤️ I'm shocked this page isn't more popular than it is. Your wealth of knowledge about cars is unreal 🙌🏼

[@stephencurry8552]

Empty: Agree.

[@boredom.victim]

distance and collaboration requirements got in the way so Freddy handed the channel over - there could be other issues but that's the main thing.

[@raven97990]

Tavarish sleeping with Aging Wheels Fiancé and walking out on his wife might have been a factor too.

[@EmptyPocketsXotics]

@@raven97990 Yeah, I'd heard something like that. Partly what I meant by "had their differences" 🤷‍♂️

[@MikeStavola]

​@@raven97990That's allegedly why a lot of other youtube car guys don't want to work with Freddie anymore.

[@davidanderson3234]

One easy or questionable thing I use are bullet casings for holes for cardboard and gaskets

[@2SlayZGTE]

Another great episode! I especially enjoyed your reaction to the Christmas tree and seeing you fabricate the motor mounts. Blank/printable card stock from an office supply store sounds like what you need for creating templates. Editor Duane did a great job again with the musical choices for this episode. Thanks again for another entertaining and informative episode and please keep up the awesome work!

[@mike30534]

Kill off the right and left headlights, boost the lumens on the center light, then add a train horn! I can't imagine the fun to be had!

[@Amos-b2b]

it's great you're getting the equipment to do the things to fab the rare stuff

[@wmejia4122]

Very interesting ride (car, motorcycle?) and very unique! Thanks for taking us along on getting this repaired!

[@sixfootbear]

Daewoo,Chevrolet, Matiz with a single front wheel..The Matiz is front wheel drive..I hope the trike is rear wheel drive..

[@russelljacob7955]

16:35 Big cutting mistake. Always cut your inside profiles first, else your material moves.

[@TheQuestionableGarage]

Actually corrected that in all my later cuts, and realized there is a button to make it automatically do that when you trace!

[@russelljacob7955]

@@TheQuestionableGarage You would love the trace table we got at work. 6ft x 8ft. Our largest cutting table can do 40 ft.

[@TheQuestionableGarage]

The arcdroid really can do a ton of awesome stuff I just really need to learn it out. Circles was so easy and I just overlooked it

[@russelljacob7955]

@@TheQuestionableGarage Computer part of CAD is a glorious rabbit hole. Software package I got for work cost more per year than my car is worth...

[@taurota1554]

Awesome and outstanding as always.Thanks for sharing and taking us along.

[@TheQuestionableGarage]

Glad you enjoyed it

[@johnnyB1968]

CAD great fabrication tool. Don’t know if it’s been mentioned, but you used a sharpie, hammer, gold old engine oil smeared on the surface works well transferring the hole formations

[@thanasisrizop6685]

Excellent video as always. This is my favourite KZbin channel, Jared is a delight to watch

[@TheQuestionableGarage]

Glad you enjoy it!

[@daniesalex7073]

The fact that you managed to. Get some parts is amazing 🎉

[@nicholasdaly7355]

Loving the enthusiasm

[@georgeferlazzo7936]

Hello again, Jared Thank you for another Great Video 👍 I enjoyed watching tonight's video. Again thank you 👌

[@TheQuestionableGarage]

Glad you enjoyed it

[@johnkauffman6347]

I really miss seeing this vehicle awesome progress keep it up.

[@alexandrecouture2462]

Cool little ''car''. Looking forward to see it work!

[@TheQuestionableGarage]

You and me both!

[@jeremylittle1581]

Being a long time viewer, I hope you're joking when you say you're not a smart man! Your skill speaks to the opposite, and your down to earth nature, and resourceful problem solving are why I love this channel!

[@neilskiw]

Cereal boxes or 24 pack beer cardboard works great for CAD. Folds easily, and is easy to cut with scissors.

[@gleddyvrudd]

I don't say many things but that is similar to our reliant robin, corner slowly and carefully , 3 wheelers tip over in corners

[@xxvjvxx]

the normal sharpie is worthless for transferring, The MAGNUM sharpie however is almost as good as transfer paint

[@gordythecreator]

That ARC droid looks awesome and convenient to have. I wish I had access to something like that and a project to use it. Ain't much goin'on in Morgan County TN

[@russelljacob7955]

Go with the silver tubes. Embrace the assistance!

[@EricV63]

Silicone spray works much better at lubricating hoses for install, and doesn't make a mess. You might pick up a can at O'Reilly's next trip. Not sure I wouldn't have just bent some tubing and had some short rubber ends for the U hose. Movement from engine may be an issue. It still bugs me that the dip stick is on the "inside" instead of pointed at the back.

[@AbbStar1989]

Love you JarrodQ

[@richardcameron5699]

Brings me back to my youth. My grandfather in England had a 3 wheel car

[@theeuda]

I would love to see you team up with Redline Ranch and do some lovely Toyota builds esp old 70s and 80s vroom vrooms. 😊

[@milesthroughtime]

The Christmas tree was because you've played Santa before ;)

[@mikekozi-lester3887]

Hi Jared nice video 📹 and workmanship!!! Gram do a weeeelie for Justin

[@LeonardMagnusson]

wish you could do a christmas show with that thing. you got the reindeer.

[@sterianburghelea6567]

Got a lift table like that. The release cable gets stuck below and keeps the valve open. I have to reset it from time to time.

[@TheQuestionableGarage]

I thought that was what I was fighting too and went after the cable and it all seemed good down there

[@sterianburghelea6567]

@@TheQuestionableGaragethen is to bleed the cylinder or spend another $ on a new one

[@resistanceisfutile]

It almost looks like there's room in the front for 2 wheels and a simple front suspension - wouldn't be a "motorcycle" anymore, but would probably corner better.

[@alderi9356]

Use a blob of nail polish to transfer the point from the metal to the cardboard.

[@johnmeyer457]

That pretty much looks like a 3 wheeled version of a Daewoo Matiz. At least exterior designwise, because the Matiz has 4 wheels and the engine is at the front.

[@HillBillYK2000]

Try using an air hammer with a round head to remove the axle. I fought a Honda cr-v for two days. the sales rep at O'Ryles gave me the tip. took 2 min. LOL

[@TheQuestionableGarage]

I did the air hammer and two pry bar tricks at the same time and it would not budge. I’ve not had one that bad before

[@gregedmand9939]

I would be talking to the folks at CFMoto about possible parts. They make some excellent side-by-side utility vehicles this size and just might have some connections to who made this wee car.

[@KomotoseKomo]

the really odd thing is I think I may have driven this car. a shady little car dealer had one back around 2010 and out of curiosity had to look at the obscure car. it had both the clip above the 3rd headlight and the broken license plate lights. be really curious to see where this all has been in its life

[@TheQuestionableGarage]

Most of this damage appears to be done after it went into storage, it has almost no miles on it.

[@punkinsgarageandpaint8299]

I would love of have one of these to drive around at car shows.

[@josephvantreeck2989]

thx Jared

[@Itstime2029]

I forgot about this project; still waiting for the Porsche project to complete

[@TheQuestionableGarage]

It’s been a few weeks since the first video on it, been waiting for the parts to come in. Porsche needs a bit more than $10,000 in parts

[@EdDale44135]

@@TheQuestionableGarageyeah, every part for Porsche gets a bump up in price.

[@bgee461]

Oh yeah I forgot about the porsche

[@chassegallerie2910]

@TheQuestionableGarage Craft paint that you can buy at any dollar store or Wallyworld for the tracing trick instead of a sharpie, Jared. Also, LS swap that thang! 😂

[@79huddy]

Grease works better and wipes back off the flange an 80 year old farmer showed me 25 years ago when I was trying to make some paper case gaskets for a dirt bike I stored on his property also showed me that a 9/16 with a nickel for a spacer will get a 7/16 bolt loose and a penny with it fits a 1/2 bolt old guy always had a banding steel knife on him and a 9/16 wrench when he was out and about tinkering around the farm

[@EVguru]

There's a reason I own many sizes of transfer screws.

[@neilskiw]

The Christmas tree is for the roof rack. Strap it on! You might have it running by Christmas...

[@richardharvey8939]

Great video

[@burninpwder76]

Careful with them Christmas trees. Get it mad it might turn...coniferous :D

[@DeatGaming]

Put the Christmas Tree on the roof and take it to Cleetus's Christmas Tree drags

[@kickasspowdercoating]

Love the CAD lol

[@kailuagarage]

Bypass heater hoses might work

[@JoeJr75]

I've been looking forward to this build....and I don't know why😅

[@TheQuestionableGarage]

Because you’ll get to see me drive it later!

[@JoeJr75]

@@TheQuestionableGarage big guy to big guy talk....you might want to have ems on site 😆

[@stevieg_306]

Looks like a Citroen/Peugeot o2 sensor connector from 1998-2010 era

[@ThatGuysChannel4Whatever]

At least he didn’t title the video “and it’s worse than you expected!”

[@TheQuestionableGarage]

When everything is already in boxes how much worse can it be

[@ianj454]

Some cheap dirtbike and atv parts off amazon or ebay might help with hoses and misc parts.

[@TJay074]

Did you try hitting that axle out from the opposite side ,im guessing you did but just wanted to make sure. Its cool to see these oddball cars.

[@TheQuestionableGarage]

They have male shafts so there isn’t a easy pass through to try the method

[@DevinPartyka]

What motor is that Honda, Suzuki, Kawasaki? try the motorcycle shops for a starter.

[@TheQuestionableGarage]

It’s a Chery

[@xxvjvxx]

motorcycle shop may be helpful but its a Chinese engine not a Japanese{Honda, Suzuki, Kawasaki are all japan}

[@DevinPartyka]

@@xxvjvxx Yeah I just used them as examples because I don't know the names of the Chinese companies......lol

[@oliverroedel1111]

@@TheQuestionableGarage chery? 🤢

[@300DBenz]

@@oliverroedel1111 It’s “Chevy”, but with a very thick Chinese accent. (For the record, thats a joke, Chery has no connection to Chevrolet, other than being sued by GM for counterfeiting GM designs so closely that Chery body panels bolted directly onto the Chevy’s they copied.)

[@JamesAllmond]

A Wildfire by any other name is still, uh, challenging junk. This should be fun... Cycle-car...

[@DrSpeed1989]

It looks like an Daiwoo Matiz here in Europe.

[@AmosAllen-v4s]

Robby Layton is doing a Bread Truck off-road build showing how he built it on his channel

[@chanceharman794]

Over night parts from Hong Kong 😂

[@TheSonofruss]

Ram board is perfect for “CAD”

[@etherealbolweevil6268]

Sir, please find some place to fit the Christmas Tree in the 'motorcycle' that is its destiny.

[@TheQuestionableGarage]

I was hoping to, but the tree does need to go to its proper place, it apparently is a product sample for a big company!

[@7mgte490]

This thing had to come from Tavarish .... Definitely Florida

[@FangOfTruth]

I have yet seen someone draw their parts on cardboard and then use the Arcdroid to cut it out. Out of the cardboard that is. 😅

[@stevie_g_easy_listening_post]

Contact grind hard plumbing guys for tips in using the arc droid

[@TheQuestionableGarage]

Hopefully there will be a fun colab with them coming up!

[@stevie_g_easy_listening_post]

@@TheQuestionableGarage I'll be looking forward to that!! 👍🏻

[@TheTalonts]

You need a roll of Ram Board it will last you a LONG time.

[@danatkinson6698]

I wonder how effective go cart and golf cart parts would do on this. They're about the same size lol

[@LeonardMagnusson]

red grease hallows in coming up. a timelly un pun

[@groermaik]

Groovy.

[@Halsehei-69]

Jared.. why don't you use brake cleaner as a lubricant when you connecting those hoses..

[@bgee461]

Slightly soapy water or coolant

[@mattpovah5952]

Stick a big old Hayabusa in there!

[@mikeloeffler6325]

OoO fancy tools

[@MartinodePueblo]

love me some funky cars!

[@tripprogers4814]

Dear Mr. Pink, 5:04 that’s 6:14 what she said

[@PeppaPig4Payton]

you doing a rob type video, small unknown vehicle...lol

[@LeonardMagnusson]

living in a small coastal town. top speed is 35

[@dillonbell5638]

Goldwing off road coming to you soon 😂

[@MarcoTedaldi]

Make sure it's really 12V and not 6V before connecting a battery...

[@russelljacob7955]

Fab tricks? Many years of being a professional CAD designer. (Computer) using programs like Autodesk systems and doing bespoke solutions for customers.

[@ste_zace]

oh yeah

[@AmosAllen-v4s]

Could you scan it and 3-D print the part

[@Rose.Of.Hizaki]

Should have bought in *AGING WHEELS* to work on this with you.

[@mckaylachevalier9877]

Hey! We have one of these and the head gasket is bad. Do you know where we can order one from and maybe a diagram of the engine. We’re located in Ohio.

[@TheQuestionableGarage]

@@mckaylachevalier9877 the engine is a super common chery brand used in a lot of U.S. sold utility vehicles. If you search the engine type you’ll find lots of parts out there, but searching by Snyder you won’t find much at all

[@GRAZINGARIZONA]

@ jarred Could this be the same Snyder that john ross had on his channel like 5 years ago?

[@TheQuestionableGarage]

This one isn't, it most likely was the dealer demo car, and only has 299 miles. John Ross's was pretty beat compared to this thing!

[@GRAZINGARIZONA]

@TheQuestionableGarage Appreciate the reply jarred, also good for your algo's whooooop whooooop.

[@asimwaqar]

This is the same car that Mr.Bean always hated 😂

[@boredom.victim]

HAHAHA as soon as the video loaded I hit like and it turned up to 69 w00t 😂

[@FLaSH_88888]

Don't tell the museum! 😂

[@milesthroughtime]

Too late ;)

[@fuse8052]

I'm famous for bending pieces of metal the wrong way!

[@LeonardMagnusson]

finally got time.

[@russrh]

Disappointed to not see any rubber dog shit in the parts boxes