02M 6 Speed Gearbox Shim Whining Fix - VW / Audi / SEAT / Skoda

The 6 six speed gearboxes in VWs Mk4 Golf, Audi, SEAT, Skoda, (petrol & diesel) tend to develop a whining sound on deceleration as well as sticking on gear shifts. A simple 02M shim mod repair can eliminate excessive play in the mainshaft and all related symptoms.
Part Numbers: Shim - WHT-001-976 Cover - O2M-301-211-B

[@bangotesla6796]

ABSOLUTE LEGEND. 11 dollar fix for me. for years i've had this whine in my 04 GTI vr6. This fixed every whine, drift, clunky shift. several techs told me i need a new gearbox. wild.

[@RedlineRevs]

So glad it saved you dollars bro. Thank you for taking the time to comment.

[@alexandrucaldararu1187]

Thank you so much for the effort of making this Video. I managed to fix this by installing the shim + replacing cap and the thick bearing bearing securing ring. Part WHT001976 (0,65mm shim) + replacement 0A5311183(securing ring because most probably old one got weared) and 02M301211B (replacement cap ) BUT BE CAREFULL: after i installed the 0,65mm shim I still had some play, could have fitted a thicher one, so instead of WHT001976 you could get the full set with different thickness part: 02B498210 and fit the proper one depending on your level of play. Thanks again!!!

[@spencergold1279]

Hi mate - I did this 6,000 miles ago - but the issue’s come back (clutch pedal gets a bit stuck down, and has crept along when the pedal was fully down). I had a look yesterday and can’t quite get another shim in, so need a thinner one. Does the full shim kit haven’t different thicknesses? Many thanks.

[@alexandrucaldararu1187]

@@spencergold1279 Yes Spencer, the kit has many sizes, from 0.6 up to 2mm i recall, you can find the exact numbers on some sites

[@spencergold1279]

Alexandru Caldararu thanks very much. I found some differential shim kits - but they’re a smaller diameter - so won’t fit the end of the input shaft which is accessible under the plastic cap... will have a hunt around.

[@fulhamchappie]

Yeah £80 for a full set seems a bit of a waste

[@Mr_V989]

i've got 3 x 0.65 shims sent by darkside and i managed to fit 2 of them in and it was a very tight fit once done there was 0 play as a result.

[@oldhemp2636]

Awesome video I've just carried out this work after following your video on my vehicle SEAT Alhambra 7M 2.0 TDI 140 6 speed manual gearbox. Couldn't have done it without this video really helped me out and save me hundreds of pounds. In my case the plug cap had become corroded meaning fluid was slowly leaking from the gearbox (fixed by installing new plug seal), also I was having problems selecting reverse and first gear which was down to the excessive play in the bearing. ( Fixed by installing shim). I realized this issue would be fixed by installing the shim after watching this video to fix the initial problem with the leaking seal cap. Remember that if you need to install the shim you have to replace seal cap also, as when you take off the old one it gets damaged and you cannot use it again. So buy the shim and the seal cap as a pair

[@lukasztabor7554]

Hi. Where did You get it from? What year is your car ? Im looking for this part for my 2011 2.0tdi 6 speed Tiguan

[@richishere82]

Done this a few weeks back . Had a 3rd gear whine . Worked a treat . Feels like a new gearbox . Nice and tight just how I like it 😉

[@RedlineRevs]

Glad to hear that bro, that's how we all like it!

[@SvabaGeneral]

i got 3rg gear whine on full acceleration, do you think this will solve the problem?

[@richishere82]

@@SvabaGeneral there is a very good chance it will sort it out. It's worth a go anyways. Cheap enough tbh .

[@gamersroost]

@@SvabaGeneraldid you? How did it go?

[@botondgavaller817]

still have the car? still working fine?

[@sumonmiah2258]

Got a touran few months back in immaculate condition black sports winter pack 17 inch alloys spoiler etc for really good price only to discover this fault . similar video saved me a lot of head ache and money.

[@1234gezzle]

Hi bud, done my mod, whining has gone and no sticking, so far so good, but i have got 5th gear back, it used to make a terrible noise going in, now its sweet. Just wanted to say thank you for keeping my leon 1.9tdi running 💪👍

[@RedlineRevs]

Bro thanks for taking the time to comment really glad it helped you. I used to have the 1.9tdi that was first time I had to do Shim mod, simple little fix. Wish you many more miles of happy and safe driving.

[@Mattblacklude]

A massive thank you for the vid - this has just saved me from the thought of replacing the gearbox on a TT I just purchased. Prev owner has been driving it 6 years with a noise on overrun and sold it because it was so bad (it really was!). Thanks so much

[@RedlineRevs]

This should be the fix, thanks for taking the time to comment.

[@Mattblacklude]

@@RedlineRevs absolutely, the problem is now gone - drives superbly without any noise. Incredible. Thanks again

[@jamesthesecond1123]

Hi Ross, what gearbox does/did your TT have?

[@bchaperz]

OMG! Thanks so much for this video, complete life saver. Just don’t this to my Leon Cupra and stunned at the difference just a washer can make. No more noise whatsoever ever. Stunned! Great tip and easy to do, retaining ring was a little fiddly to get out but once our job was done in a matter of seconds. Top fella, well chuffed.

[@RedlineRevs]

Really glad this helped you, thanks for taking the comment to comment.

[@blamine5]

Redline Revs does it solve whine problem on skoda yéti 6 speed manual transmission ?

[@rylonic]

I don't know if you see still active here but thank you so much for making this vid. I bought a spares and repairs Cupra R 3 weeks ago and with a lot of work I managed to keep her on the road. Probably the most expensive thing that could've break it for me was the gearbox. And now from £20 it's all sorted. Thank you so much again!!

[@RedlineRevs]

You're welcome bro thank you commenting and well done restoring one and keeping to keep it on the road. There will be more stuff coming on the channel soon enough. 👊🏾

[@tehrealone1]

@@RedlineRevs Yes THank you! i tried this when my 5th gear was making a sound on deceleration, and it worked! thank you!

[@geoffsmith7914]

Thank you my friend - I've just completed this "fix" on my 1.9tdi Alhambra: £16 total parts ordered from the local VW dealer & as couple of hours effort - mainly taken up with working out how to get the spring clip out . . . ultimately with a pair of jewellers screwdrivers! Changed the gearbox oil too (£54) whilst I was underneath and getting dirty! Brilliant result & ready to go on for another 188,000 miles!

[@seanlyons161]

Fantastic fix for that whining noise I had on my mk4 Golf 1.8t AUQ 6 speed engine. Thank you so much!

[@RedlineRevs]

Glad it worked for you bro, thanks for taking the time to comment.

[@seanlyons161]

Redline Revs it’s an Interesting fix, I bet not so long ago some garages would charge for a new gearbox but just place this new part, as it does make a huge difference. How did you find this fix?

[@RedlineRevs]

@@seanlyons161 I know for a fact some garages were adding this and charging for replaced / recon gearbox... The fix had been known amongst owner community for a long time I actually did it on my 1.9tdi with 6 speed box years ago but file was corrupted so never uploaded back then.

[@dennisearle3395]

Hi can you tell me where you get these parts from please cupra r mk1 225 1.8t many thanks

[@ap8027]

Top lad! I installed this mod onto my Audi TT MK1 (02M FZP Gearbox) yesterday. All gear whine miraculously gone from 1-4 and it's smooth to shift now! No crunches, no difficult gear changes. I want to thank you for this video as it definitely helped me doing this on my own, this is a REALLY EASY AND RECOMMENDED mod if you have gear whining hands down. It's amazing how such a washer can make all that difference. Are there any downsides to this mod, or is it nothing but beneficial to the gearbox.

[@fulhamchappie]

Finally !!!!! Someone describes my noise AND provides a fix !!!

[@Michael-oi5fl]

This man brought two pairs of tweezers to pull a snap ring. I'm dying. 🤣

[@darrenharrison1311]

Thank mate I had problems with first and reverse gear hard to select or sometime would not come out and creeping forward with clutch fully Down replaced shim all fine now thanks very much saved me taking box off

[@nemanjakerezovic3560]

Did this fix it for you? Im having this trouble now not going in or out of gear and creeping forwards😬😬

[@codyleatherwood6084]

I just got a 2004 Jetta gli that's been sitting for 3 years, figured the sound was from sitting for so long but glad I looked this up. Gonna definitely be taking care of this

[@masonhope]

Thanks for the content. waiting on the shim, looking forward to getting rid of the 3rd gear whine.

[@RedlineRevs]

Good luck!

[@TheDaley007]

This video has made my day! I was thinking I needed a new gearbox. Cheers and subscribed. :)

[@RedlineRevs]

carl daley really glad it helped, thanks for commenting and subscribing there is a lot more coming up!

[@mrmotors756]

Is that 'widow maker' jack upside down or 🤔

[@stevenallman788]

Brilliant vid, just done it on my mk1 TT, bit fiddly but what a difference, you are an absolute star, 👍

[@jassongege1523]

Hi, This is exactly what I have in my Golf MK4 6 speed. in the 3rd gear when I take my foot off the gas pedal I hear like a bearing whining, and only on third. I was thinking about a bearing going bad inside the transmission. but you showed me the symptome right there. thank you very much, you saved my Golf. thumbs up.

[@anton101101]

Thanks for uploading. I got my shims n cap off DarksideDev, came with 3 shims just case you got really bad play and don't forget if you can get em circlip/snap ring pliers makes getting the ring out easier. So what I did first was check the play in the shaft and yes there was play so stuck in the 2 out of the 3 shims to see what I needed to use but I found I couldn't fit in the circlip on top of the 2 shims to lock it as of course that circlip also acts as a shim so really only need 1 shim plus the circlip. With the circlip now back in with 1 shim the play in the shaft was pretty much gone also the new plastic cover you hammer back on is also going to apply a resistance against the play.

[@kangapoopradjan4426]

Very well Done 👍 Good concise video Get a pair of circlip pliers & should clean area first & wipe cap seal area with clean dry cloth b4 fitting new cap If you have an automatic link that pays you for sending people to a tool company you might want to find a circlip plier set that has 3 removable heads for making this job & others easier & quicker It benefits you & the many people who watch your vid & think may try this but put off by circlip faff. Take this as a compliment from an engineer who's been fixing things for 50+ years 👍

[@dylanhayes984]

What size shim did you order from darkside

[@anton101101]

​@dylanhayes984 Hello, I checked my order, as below. SKU: DSD1810 79.35mm

[@vp2395]

Hello! What are the symptoms if this bearing is bad? I have problems with my 6 speed manual gearbox on my Audi. Gearbox checked by mechanic, nothing was found broken. I do not know if he checked this part on the video. I have strange rattle in idle, whine while accelerating and strange grinding noise in left turns. Can be this because of excessive play in the mainshaft? Thanks.

[@MrOtoreniloleg]

This is so common on the León Tdi Arl, the gearbox code FMH, as always Good Job bro keep doing this videos

[@RedlineRevs]

Yeah it is very common on those I had to do this on my ARL as well. Thanks for your continued support bro, more to come over the course of 2018.

[@MrOtoreniloleg]

Redline Revs And Happy New year to you :)

[@RedlineRevs]

Aleix Rivera same to you bro

[@TheGargonne90]

Fitted this on my MKV GTi because the clutch was sticking intermittently and it felt as though there was minimal back pressure whilst changing gears. This has completely fixed it. Thanks very much!

[@Cubanoshop]

Thank you for this video you are great person,, i put one ring of the d15b7 in my gearbox substituting the oem ring,work excellent

[@RedlineRevs]

Glad it helped, thanks for taking the time to comment.

[@humanbean899]

Hi, you probably won't see this, but you say you had an oem ring already installed? I tried to fit today but the play wasn't enough to fit the new ring and circlip over the top again. I now wonder if there was an oem ring that I didn't notice

[@malinpetkov5114]

Great video. Is this related to the 6th gear being empty? All gears go well but then I put 6 gear is empty. The gearbox runs noisily on empty without speed and then i press the clutch is quiet!

[@RedlineRevs]

Thanks, I think a shim should help with that. It's cheap and easy enough to try it before anything else.

[@brianbarnes8162]

Hi , I have a 2013 Skoda superb 2.0 TDI ,with the gearbox code 02Q, I have a few whining noises I'm trying to fix. Can the plastic cover be removed and the shaft checked for play ? And if none found the original cover be replaced ,or would I need to replace cover with a new one ? Great video BTW. Cheers b

[@binagarten4667]

I have a Mk5 Tdi Golf 5 spped changed the Transmission oil with Redline for car and the Gearbox started to whine! do you know if the 5 Speed box has a similar set up, Great upload buy the way.

[@DeepakKumar-lv4te]

Thanks. Do you know, is that the rear main shaft bearing that is visible there and can it also be replaced at the same time? thx.

[@Paul25uk]

I have transmission whine that gets noticeable around 50mph and progressively gets louder. I have an Audi A4 1.8t B6 with a 6 speed box. Is this gearbox subject to similar wear and if so is there an easy fix for it? Engine / gearbox layout is totally different so probably not?

[@taktak2891]

Hi , did you fix it , I have same problem with Audi a3 automatic transmission 🤦‍♂️

[@BOOSTEDDUDE]

Well done! I saw this video and another one that greatly helped get my shim installed! It's cured quite a few issues as far as I can can tell with clutch creep, etc.! My mechanics were telling me I needed an entire new clutch / flywheel after just upgrading to a Stage 2+ with 20lb flywheel a little over a year ago. So far so good after a few days of using this shim. Thanks

[@RedlineRevs]

Bruv I'm so glad the shim worked for you. Sounds like you have a bit of a beast there...

[@BOOSTEDDUDE]

Me too @@RedlineRevs!!! It's been shifting and working great again. Can get my power back to the ground more efficiently now! Best fix ever!

[@louisjames1062]

BOOSTEDDUDE did you find it difficult engaging first or reverse whilst stationary? That’s the issue I’m having

[@dmc1221]

BOOSTEDDUDE I fitted a stage 2 clutch kit flywheel slave cylinder and master cylinder and now my car is hard going into gear,it’s as if the pressure plate isn’t fully opening. O2m gearbox aswell

[@jjse79]

Good day, im curious about what that whine sounds like. Any ways why did the gearbox came without that shim in first place?

[@RideToLive102]

Thanks for taking time out of your daily schedule to record stuff like this for us to benefit from absolutely free of charge. My cupra 1.8t 2004 seems to have a big plastic cover covering the whole thing so I can't see what's behind it, looked for ways to remove it seems impossible without bumper off? You don't seem to have that issue.

[@RedlineRevs]

My brother thank you for taking time out of your busy schedule to share your supportive words. My TDI had the same plastic cover, I ripped it off and threw it away, didn't even reassemble it, and never looked back.

[@RedlineRevs]

You should be able to remove that plastic sheet w/ bumper still on- although mine was just hanging on so it came off easy.

[@RideToLive102]

Smashing chap for that rapid reply, what a legend. The weather is rather ugly at the moment, I will get a proper look at it when my shim and cap gets delivered tomorrow, attempted to contact the guys mentioned on your video and apparently they have had so many people asking about it based on your video(influenced a lot of people to go DYI prompts to you) that they are out of stock and do not know when they will receive more. I ordered directly from dealer both parts £15 which isn't tragic by a long throw if it fixes the absolutely PITA whining sound coming from the box during deceleration mostly noticeable in 3rd but is there throughout the gears just far quieter. Thanks boss, will keep updated on the outcome likely tomorrow, at the same time fitting new PCV pipes ordered from fleebay as keeping the car bog standard except for map (easier resale :wink:).

[@RideToLive102]

Hi again fella. Had all my parts today, removed the cover(i mean ripped it off completely as all fixings were shot anyway) and for the life of me the clip wouldn't go back in after fitting the shim, if I forced the clip it went in but so tight that the ring and internals would no longer spin. Can I assume that I haven't got quite that much play yet hence being unable to install the shim? Cheers

[@RideToLive102]

@@RedlineRevs hey buddy, attempted it again with a bit more spare time as the car is off road atm, for the life of me can not get the clip to sit properly, I can force it in the grooves but its such a tight fit that the mechanism is very hard to spin and getting the clip back out is fkin cancer. Do I not yet have enough play or can it actually be driven with the shim being so damn tight? Would appreciate any input plz thanks

[@dyllman98]

So unfortunately I have the earlier version gearbox without the service window 😢 how would fix that issue?

[@RedlineRevs]

Unfortunately your best bet would likely be a replacement used gearbox (cheap) or recondition the existing box (expensive). Take it to a specialist to establish exactly what the issue is firstly.

[@inkedtothebone]

Hey man. Hope you can answer me. I have just been to view a Fabia VRS 1.9tdi 130. It's having real trouble selecting 1st gear. The seller told me a shim kit would sort it. Is he right in what he is saying?

[@SJ094]

Would this work on a 2001 A3 1.8T Quattro ? Slight wine in 1st and gears a bit stiff when going through them, regards steve

[@everythinginbetween4440]

Getting this whirring noise when deceleration on my Audi TT V6 s tronic will this work on automatic or only manual cars?

[@NintendoBamsen]

I drive a 1.6 TDi vw passat from 2018 6 speed manual gearbox which has some problems with sticking on gear shifts, Will this solution be something I can use on my car or is it only on older models ?

[@azzaro316]

Is there a different sound on road ? noise goes off ? I have the same problem : big noise on 5°gear.

[@preciseaudioblog]

Very nice vid. Does this apply for the DSG and multitronic gearboxes of Audi?? Thank you.

[@fizaraja2205]

I love your channel and thanks for helping us out. You deserve a 🌟

[@PRMorris]

Great vid, appreciate the effort. Can you confirm that the cap is steel with a plastic coating? ...as I have bubbling on the outside surface, along with an oil leak.

[@erichbrough6097]

Just installed one - def a metal cap with some kind of rubberized coating

[@filipeleao8710]

good ... i have a golf mk5 2.0 tdi gearbox reference grf and it has the same noise in fifth speed ... will it solve with this piece ??

[@SheppyHJ]

Nice video dude, cool that you're from Bristol, also having to look around for parts after David Hawthorne left haha!

[@RedlineRevs]

SheppyHJ thanks for taking the time to comment! I'm actually from London but ordered this stuff from Bristol. Yeah I think he works at TPS now.

[@muramasa2643]

Sick mate, wish I knew about this last year, already forked out the 600. Even better still, think the fork selector went on me today. 1st and 2nd gear gone!

[@RedlineRevs]

That's unlucky, this probably would have saved you that £600!

[@ajJackosn]

so I’ve got a Skoda fabia vrs 2006, was on motorway came and seemed to be stuck in 6th then found it tough 1st-2nd gear then the squealing started for about 3 mins when in 3rd then gears because a lot easier to get, but also noticed oil coming from box so if I fit one of these o rings could this solve the issue?

[@DD-fr5lt]

Hi. I have the whining noise in 4th gear. Will this be the same fix for an Audi a3 8p tfsi? Great video by the way.

[@RedlineRevs]

I can't remember off the top of my head whether they have the same gearbox but if you see this service cap behind the wheel then you should be able to find the right size shim.

[@DD-fr5lt]

@@RedlineRevs OK brilliant. Thanks for getting back to me. 👍

[@miitsaras7]

My friend can you tell me if i do what you show on the video my car stop having this sound?it hears like a noisy bearing... But its not a bearing.i have seat Altea xl freetrack 2011 1400 tsi.please answer me.thank you. 6 gears manual transmission forgot to say

[@lennycook206]

Mate I'm hoping this is gonna be my fix. I have mk 5 gold plus 1.9tdi and its a feint but obvious whine in 3rd... But only when I accelerate. Take foot off ggas and it stops, its free wheels in 3rd with no noise. All other gears seem normal. Change is still perfect, so I guess it's still in early days. Do you think this will work for me? My car is only a 5 speed... Any advise?

[@RedlineRevs]

Yes that sounds like the same problem. But you'll have to check if the 5 speed box has the removable plastic cover to get in from as I think this may work on 6 speed boxes. Let us know how you get on.

[@onizukathegame4808]

I have 2.2mm... I use shim. This is safe? Gearbox now working good.

[@davewalker61]

Hi, will this help cure a new issue I have with each gear needing a little bit of force or get into gear. I have a 6 speed golf tdi 150.

[@garethnorwood2084]

I have a noise in 5th gear but goes away when clutch pressed down. And when I accelerate it goes. Will that be this Octavia MK2 2.0tdi 2007

[@diogogomes7864]

Hello my friend. I have a Audi A3 8v 1.6tdi 2015, 6 gear and the gear box does that sound. Do you know if that part is compatible with my car? Thank you

[@adrianleostean6798]

Heloo, I have the same problem to my gearbox, can you give me please a link, I am from Romania and i want tu buy. Thank you

[@greck9992]

Top man.. These cupra r videos are spot on. All the problems arising from a car of this age all covered. One more sub my friend... :)

[@RedlineRevs]

greck999 thank you so much for your kind words and support!

[@biri911]

I have a lion Fr 150hp diesel, that ring that installs, I think reference Wht001976 is of a single thickness or there are different thickness. I understand that depending on the clearance, any thickness would not be adequate, right?

[@Phendu]

Hiya I think this will help me, but I have a whining noise from 1st and slightly from 2nd gear when driving off will this part help? Also what is the part no pls

[@swagon7626]

We need to replace the whole bearing. Do you know if you have to drop the entire transmission or just the case cover for it to get it out?

[@erichbrough6097]

Great vid! Just to confirm, is the spring clip gripping something, or expanding outwards into a groove?

[@RedlineRevs]

The clip just strenches into the groove. Thanks for taking the time to comment.

[@erichbrough6097]

@@RedlineRevs Got it done, _finally_ , this past Saturday - quite fiddly to get both out and in. Unf it didn't take up all the slack that is there, so there's still some whine. Maybe I should get another kit and double up on the spacers?

[@RedlineRevs]

@@erichbrough6097 you can double check by pulling / pushing the bearing shaft to see if it clicks in all the way. On one of the cars i did it to there was a whine for a moment afterwards whilst I considered putting a second shim in after a few miles and some spirited cornering the remaing whine disappeared by itself. You may need thinner shims if you going to use more than one. Let us know how you get on.

[@midorialexandros]

@@erichbrough6097 How did you end up with this one?

[@johnikonomidis5851]

i already have the washer but the axle still plays in/out.i try two washers but not fit.the new washer is 0.5mm and the old one 0.4mm.what u suggest? s3 tfsi 550nm

[@erikyeager9610]

Thank you so much for sharing this I’ll be ordering this and crossing my fingers!! lol

[@RedlineRevs]

Hope it helped!

[@conorf8091]

Ordering one tomorrow. Even the few I know who are knowledgable with vag cars know haven’t mentioned this trick! Hope it works on my 1.9 tdi BKC 6 speed with 170k miles on. Will update

[@midorialexandros]

Just did mine today in my 2005.5 MK4 GLI, night and day doesn't cover it. It's not even the same car. I hope you have the same results, update us!

[@conorf8091]

midorialexandros still haven’t done it 😁 I can’t actually the drive car until 23rd June. I’m gonna get a weeks driving without the shim then install it to really see the difference. Good to hear it worked though

[@scastle90]

You my friend are a bloody gem!! My R has developed the exact noise (great impression of the sound btw haha) 1st and 3rd are the most noticeable but I'm pretty sure it's there in all gears slightly. My only worry is that the car had a box rebuild back in 2011 and I'm guessing that they did this shim mod when they rebuilt it? However, I'm willing to spend £20 to see if it fixes it before I source another gearbox.

[@RedlineRevs]

scastle90 thanks for your support. worth checking it could just be this it's completely stopped the sound for me.

[@Grimwriggler]

HA! i have noticed mine starting to stick a bit plus a bit of a whine, not too bad, but it wasn't there before. I shall order this part cheers man.

[@RedlineRevs]

Grim wriggler glad to help with that gearbox has a lot of life left if you get this shim in soon.

[@sumonmiah2258]

What mileage ?

[@RA-gp3yw]

Hi mate. Can I change this on my Audi A3 8PA 1.4 TFSi 6Speed Gear Box. 2008 year of manufacture. Thank you 😊

[@hdj808]

Could this be the issue with 5th gear whining? 1,2,3,4 and 6th are fine

[@whosmans1337]

Is this for dsg? I’ve been getting a similar sound on decel in 2nd/3rd gear but I’m dsg

[@brad6155]

Does the circlip have to sit do far back it touches the Shim? I have a groove at the lip of the gearbox where the circlip naturally wants to sit but it then stops the cap from going back on

[@Praise_God369]

only whining or clutch related problems to?

[@shaneadams485]

just got a golf mk 5 as a toy and replaced dmf and clutch, noticed got a gearbox whine when off the throttle will this fix it? its a 1.9tdi 6 speed 56 plate donkey

[@TG_lightProductions]

Can the bearing itself be removed and replaced? Broke my bearing yesterday. Any help !?

[@mattconstantine5429]

Hi, do u remember if the severity of the noise changed when steering left to right?

[@abcd-is8lv]

Could i use it for my seat leon cupra 1m (2004) 1.9tdi 150ps?

[@antz139]

any idea where to install this on a Passat 03 6 speed? There I nothing like yours behind the passenger side wheel, guessing the gearbox is mounted differently on the Passat. Have the same whine as you described when deaccelerating and hard to get into 1/2/3 when cold, a lot easier when warm but downshift to 2nd from 3rd always hard to get in.

[@neilgleave5048]

I'm doing this tomorrow hope i get an answer before tomorrow what happens to the old shim please

[@sergiodominguezgonzalez9700]

Hallo, ich habe das gleiche Problem. Wo kann ich das Reparaturset bekommen?

[@RedlineRevs]

Hallo, Danke fuer deinen Beitrag, die Kontaktdaten fuer meinen Haendler hier in England sind im Video erwaehnt, es kann allerdings sein dass es durch Brexit schwieriger geworden ist das zu importieren. Die Artikelnummern sind WHT-001-976 und O2M-301-211-B damit solltest du sie hoffentlich bei einem lokalen VW Haendler in Deutschland bekommen. Viel Glueck!

[@benaiahshanks7635]

My car (130pd bora) is very hard to get into gear an wont drive at all when I select neutral and lift of th pedal it stalls will this mod fix all this?

[@andreychobanov343]

Hi, i nave some noise, but on 5th gear, can you give number of spare part to find?

[@nazaqatali4695]

I bought this washel and changed in my Ford galaxy 2006 plate regestrion ay06kxw I was facing difficulties to go in 1st and reverse gear and granding sound was coming from engine after changing this car is perfect now very good thanks for this vedieo save money from changing gearbox

[@RedlineRevs]

Really glad that it helped thanks for commenting!

[@nazaqatali4695]

@@RedlineRevs you saved my money and time

[@RedlineRevs]

@@nazaqatali4695 thank you so much for your support really glad this saved your money.

[@nazaqatali4695]

@@RedlineRevs good

[@tonyhughes306]

my box is a cap with circlip on outside does that have same problem

[@dublinbikereire]

Hi redline I have a 2012 6 speed 2.0 a3 Quattro tdi and it whines at slow speed when in gear and it clunks and sounds horrible in reverse gear and feels like something’s crunching like a bearing and it doesn’t want to move really in reverse either,,any idea if it’s the same thing that happened to you?Any help would be great thanks.

[@RedlineRevs]

Mine didn't get so bad on the cupra r but my old 1.9tdi with 6 speed manual developed similar symptoms and this fixed it. Hope it works for you.

[@dublinbikereire]

Redline Revs ye cheers bud and I left it in a garage and he said the 4x4 differential is broken,is this the transfer box?

[@mr2tall110]

Hi great vid , I’ve got an Audi s3 8p dsg auto and it has the same whining nose , will this work for dsg auto ??? Thanks for your help

[@gadilicea9123]

it works only on manual

[@midorialexandros]

You're a fucking saint. Just completed this job on my 2005 GLI 6speed. You really undersold how much of a difference this makes. I was getting some sticking going from reverse to first gear, and some sloppy shifts from 2nd to 3rd. I ALWAYS heard a pretty noisy "clunk" when pushing the clutch in, something I assumed was normal. Gone. All of it. Smooth as butter, you can't even hear or feel when the clutch is pressed in now. Not the same car. Feels like I just dropped a brand new gear box into it. Makes me wonder how many people had work done to their gear box that didn't need it, or how many failed prematurely. You'd think VW would have put out a bulletin about this. Anyway, thank you again. xoxo

[@humanbean899]

I have pretty much these same symptoms, but I bought the shim and attempted to install today, and while there is some play there, it isn't enough to get the circlip properly back over the top of it. So I had to put it all back together with the new lid - makes me wonder what else could be causing these issues, I've had a new clutch and dual mass flywheel.

[@midorialexandros]

​@@humanbean899 It's supposed to be a very tight fit, that's how it's supposed to be, so there is no play. There shouldn't be any play at all. I suggest getting another cap and taking it apart again.

[@botondgavaller817]

is it still good?

[@karzanmuhamed1966]

Hi I have got Skoda Octavia 2015 6 speed , mines very sticky in 2ed gear specially when the car is cold as soon as warm up it’s improve a lot any idea please I appreciate thanks for any respond

[@jak0tak022]

Can I replace this oring in its 1.8t 4x4? Do I have to undress the gearbox?

[@mathewbailey1004]

Got one of these for my 2005 1.9 tdi Seat Alhambra from BSF 👍

[@leuka6770]

Hi. I have a 6 speed 02Q gearbox. I changed yesterday my clutch and I saw that the wave has to much play. Can I install this also at the 02Q gearbox? Did I saw it right, you took the old ring out out the new one in that place and behind the new ring you install again the old one? I have a golf 5 2.0tdi 2004. when I change in 5th gear, little sound occurs. Only while changing in 5th gear.

[@Exonom996]

you tried it out? or hot any answer? thx

[@mikemike5834]

My vw bkd is whining only in 5th when letting it decelerate could this be the problem it only dose it in 5th when letting of the throttle all other gears are fine

[@Achrafely92]

is it the same procedure for a VW with a DSG6 ? because i hear a rattling noise ( like a CLACK ) when downshifting from to D3 to D2 ! please answer me

[@gamersroost]

No - This is most likely the flywheel on the DSG. 2 Years ago I hope you got it sorted.

[@rodrigolopezd5180]

Hey man, awesome video, can you send me the link to buy one? I have a cupra r 2004 withe the same problem

[@jso4060]

If this works it will be a good days work superb video

[@1234gezzle]

Hi bud, great video. You have helped me with a few things👍. Mines started to stick pulling out of 2nd gear its not every gear just 2nd and its intermitant so not every change, its fine in with the engine off or stationary will this solve the issue?

[@RedlineRevs]

Might do I had sticking shift on my old 1.9tdi with the 6 speed box and the shim fixed it.

[@1234gezzle]

@@RedlineRevs thanks mate, ive got a shim just waiting on the cap, gna have a go at the weekend. Ill let you know how i get on 👍

[@midorialexandros]

@@1234gezzle How did it go?

[@1234gezzle]

@@midorialexandros it worked mate, stopped it sticking and stopped the weird noise I was getting in 5th gear

[@midorialexandros]

@@1234gezzle I’m getting some sticking going from 1st to neutral. Which model do you have? I’ve got a 2005 1.8 GLI, verified with the dealer I have the 02M, but the dealer is also telling me this seal part number doesn’t fit my car. They also can’t give me the ‘right’ part number either. :/

[@codydepriest5315]

Okay cool, but what was the part number?

[@ozdarbolone]

I gave one washer but the looseness is still there, can I put two washers? Gearbox FMH Leon ARL

[@RedlineRevs]

There has been reports of people fitting two of them but you might want to get thinner ones for that if you can find them. Good luck!

[@sheldontrapson1347]

would the whine happen on acceleration too? would this fix it

[@DHsimon123]

Hello, is it still good after 2 years? Thanks a lot

[@Alexander_l322]

I’m a bit late to see the video but if you’re still replying to comments let me know if you think this will fix a gearbox whine in 1st and 2nd gear. Mk1 Audi TT 225 cheers

[@onizukathegame4808]

Hello! I try this tomorrow. When i let go my clutch i hear litle knocking. 3 gear i hear rattles when i use him and somtimes 4 gear.

[@MisterOckelbo]

Will this work in -08 2,5TDI Transporter 4Motion? Gearbox code kck.

[@theeviloneohyes]

i am guessing that the 6 speed gear box in my vw based ford galaxy is the same , my 1.9tdi whines like mad in 5th gear when i take my foot off the gas ...

[@RedlineRevs]

Yes It's The same you can do this on the galaxy.